Defect Engineering:Can it Mitigate Strong Coulomb Effect of Mg^(2+)in Cathode Materials for Rechargeable Magnesium Batteries?

Rechargeable magnesium batteries(RMBs)have been considered a promising“post lithium-ion battery”system to meet the rapidly increasing demand of the emerging electric vehicle and grid energy storage market.However,the sluggish diffusion kinetics of bivalent Mg^(2+)in the host material,related to the strong Coulomb effect between Mg^(2+)and host anion lattices,hinders their further development toward practical applications.Defect engineering,regarded as an effective strategy to break through the slow migration puzzle,has been validated in various cathode materials for RMBs.In this review,we first thoroughly understand the intrinsic mechanism of Mg^(2+)diffusion in cathode materials,from which the key factors affecting ion diffusion are further presented.Then,the positive effects of purposely introduced defects,including vacancy and doping,and the corresponding strategies for introducing various defects are discussed.The applications of defect engineering in cathode materials for RMBs with advanced electrochemical properties are also summarized.Finally,the existing challenges and future perspectives of defect engineering in cathode materials for the overall high-performance RMBs are described.

Biomaterials and tissue engineering in traumatic brain injury:novel perspectives on promoting neural regeneration

Traumatic brain injury is a serious medical condition that can be attributed to falls, motor vehicle accidents, sports injuries and acts of violence, causing a series of neural injuries and neuropsychiatric symptoms. However, limited accessibility to the injury sites, complicated histological and anatomical structure, intricate cellular and extracellular milieu, lack of regenerative capacity in the native cells, vast variety of damage routes, and the insufficient time available for treatment have restricted the widespread application of several therapeutic methods in cases of central nervous system injury. Tissue engineering and regenerative medicine have emerged as innovative approaches in the field of nerve regeneration. By combining biomaterials, stem cells, and growth factors, these approaches have provided a platform for developing effective treatments for neural injuries, which can offer the potential to restore neural function, improve patient outcomes, and reduce the need for drugs and invasive surgical procedures. Biomaterials have shown advantages in promoting neural development, inhibiting glial scar formation, and providing a suitable biomimetic neural microenvironment, which makes their application promising in the field of neural regeneration. For instance, bioactive scaffolds loaded with stem cells can provide a biocompatible and biodegradable milieu. Furthermore, stem cells-derived exosomes combine the advantages of stem cells, avoid the risk of immune rejection, cooperate with biomaterials to enhance their biological functions, and exert stable functions, thereby inducing angiogenesis and neural regeneration in patients with traumatic brain injury and promoting the recovery of brain function. Unfortunately, biomaterials have shown positive effects in the laboratory, but when similar materials are used in clinical studies of human central nervous system regeneration, their efficacy is unsatisfactory. Here, we review the characteristics and properties of various bioactive materials, followed by the introduction of applications based on biochemistry and cell molecules, and discuss the emerging role of biomaterials in promoting neural regeneration. Further, we summarize the adaptive biomaterials infused with exosomes produced from stem cells and stem cells themselves for the treatment of traumatic brain injury. Finally, we present the main limitations of biomaterials for the treatment of traumatic brain injury and offer insights into their future potential.

Exploration of Ideological and Political Materials for the Course of Inorganic and Analytical Chemistry for Environmental and Ecological Engineering Major

Integrating ideological and political theories teaching into the whole process of classroom teaching construction is a new requirement for implementing the fundamental task of cultivating people by virtue and playing the role of collaborative education.In order to realize the seamless integration of inorganic and analytical chemistry courses and ideological and political education,this paper summarizes the current situation of ideological and political research on inorganic and analytical chemistry courses in three major databases in China(VIP,CNKI and Wanfang),and sorts out the knowledge points,ideological and political elements and educational goals according to the content of the course chapters,to provide a basic guarantee for the ideological and political education construction of the course.

面向国际合作班的Engineering Materials课程教学研究与实践

针对国际合作班双语教学特点,结合专业培养要求,对现有Engineering Materials教学模式中存在的一些问题展开研究,重点在教材建设,教学方法以及考核方式方面寻求解决办法,开展面向国际合作班的Engineering Materials课程教学研究与实践。

DID Code:A Bridge Connecting the Materials Genome Engineering Database w让h Inheritable Integrated Intelligent Manufacturing

A data identifier(DID)is an essential tag or label in all kinds of databases—particularly those related to integrated computational materials engineering(ICME),inheritable integrated intelligent manufacturing(I3M),and the Industrial Internet ofThings.With the guidance and quick acceleration of the developme nt of advanced materials,as envisioned by official documents worldwide,more investigations are required to construct relative numerical standards for material informatics.This work proposes a universal DID format consisting of a set of build chains,which aligns with the classical form of identifier in both international and national standards,such as ISO/IEC 29168-1:2000,GB/T 27766-2011,GA/T 543.2-2011,GM/T 0006-2012,GJB 7365-2011,SL 325-2014,SL 607-201&WS 363.2-2011,and QX/T 39-2005.Each build chain is made up of capital letters and numbers,with no symbols.Moreover,the total length of each build chain is not restricted,which follows the formation of the Universal Coded Character Set in the international standard of ISO/IEC 10646.Based on these rules,the proposed DID is flexible and convenient for extendi ng and sharing in and between various cloud-based platforms.Accordingly,classical two-dimensional(2D)codes,including the Hanxin Code,Lots Perception Matrix(LP)Code,Quick Response(Q.R)code,Grid Matrix(GM)code,and Data Matrix(DM)Code,can be constructed and precisely recognized and/or decoded by either smart phones or specific machines.By utilizing these 2D codes as the fingerprints of a set of data linked with cloud-based platforms,progress and updates in the composition-processing-structure-property-performance workflow process can be tracked spontaneously,paving a path to accelerate the discovery and manufacture of advanced materials and enhance research productivity,performance,and collaboration.

Defect engineering in two-dimensional materials

Since the discovery of graphene in 2004, two-dimensional (2D) materials have attracted worldwide interest. They are proved to be the most promising materials for next generation electronic and optoelectronic devices, including transistor, photodetector, sensor, modulator and light-emitting diode. Defects, e.g. vacancies, adatoms, edges, grain boundaries, and substitutional impurities, are inevitable in 2D materials[1]. They will influence the performance of the materials in many aspects such as mechanical, electrical, optical and optoelectronic properties. For example, the presence of sulfur vacancies (SVs) leads to electron donor states within the electronic bandgap. This increases electron concentration and results in n-type characteristic in as-prepared MoS2. They could also give rise to hopping transport behavior in low carrier density and act as scattering centers to reduce the carrier mobility in MoS2. Thus, defect engineering, namely, eliminating the unfavorable defects and introducing beneficial defects is very meaningful, and would be a promising strategy to realize high performance electronic and optoelectronic devices based on 2D materials.

The Early Basilica Church, El-Ashmonein Archaeological Site, Minia, Egypt: Geo-Environmental Analysis and Engineering Characterization of the Building Materials

El-Ashmonein is a significant archaeological site with different buildings from various eras. Between the villages of El-Idara and El-Ashmonein are there mains of Hermopolis, one of the ancient Egyptian metropolis capitals of the fifteenth century of Upper Egypt, called the hare. The buildings in this archaeological site are exposed to many causes of destruction and damage. The remaining structures and granite free standing columns in this area are suffered from plenty of geo-environmental and geotechnical problems. The main objectives of this study are 1) to assess the current state of preservation of this important archaeological site, especially the basilica church with its free standing huge columns, 2) to analyze the different actions which cause the destruction of the archaeological site, in particular the old flash floods and earthquakes, and 3) to identify the geochemical and engineering properties of the construction materials of the granitic columns and other limestone structures of the basilica church by using different kind of sophisticated analytical and diagnostic tools and methods. The multi-criteria analysis allowed the integration of several elements for mapping the vulnerable zones. Results revealed that about 80% of the study area was exposed to high and medium old floods vulnerability because of the vicinity to the Nile River. The structural and non-structural measures recommended in this research will help the decision makers and planners to effectively develop strategies for future site management, intervention retrofitting and rehabilitation of this unique archaeological site.

Review on engineering two-dimensional nanomaterials for promoting efficiency and stability of perovskite solar cells

Perovskite solar cell(PSC) has gradually shown its great superiority in photovoltaic filed to compete commercial solar cells owing to its great advantages, such as high efficiency and low fabrication cost. On the way towards commercialization, great efforts have been achieved by accelerating charge extraction and reducing carrier recombination. Recently, two-dimensional(2 D) layered materials have attracted increasing interests for application in PSCs due to their distinctive chemical and physical properties, such as high carrier mobility and tunable bandgap, which greatly determines the perovskite film growth kinetics, carrier transfer and stability of PSCs. Therefore, with the aim to better understand their recent development and application in PSC, in this review, the emerging 2D materials beyond graphene as charge transport layers, buffer layers and additives in perovskite film for enhancing the efficiency and stability of PSCs are summarized. However, there are still some crucial challenges to be addressed for commercialization. Finally, the challenges and prospects of these 2D nanomaterials for application in PSCs are further proposed for future development.

Study on Interface Friction Model for Engineering Materials Testing on Split Hopkinson Pressure Bar Tests

Split Hopkinson pressure bar (SHPB) has become a frequently used technique to measure the uniaxial compressive stress-strain relation of various engineering materials at high strain-rates. The accuracy of an SHPB test is based on the assumption of uniaxial and uniform stress distribution within the specimen, which, however, is not always satisfied in an actual SHPB test due to the existence of some unavoidable negative factors, e.g., interface friction constrains. Kinetic interface friction tests based on a simple device for engineering materials testing on SHPB tests are performed. A kinetic interface friction model is proposed and validated by implementing it into a numerical model. It shows that the proposed simple device is sufficient to obtain kinetic interface friction results for common SHPB tests. The kinetic friction model should be used instead of the frequently used constant friction model for more accurate numerical simulation of SHPB tests.

Department of Metallurgy and Materials Engineering of Chongqing University

Chongqing University is located inChongqing City,Sichuan Province.Foundedoriginally in 1929,the university has sincethen greatly expanded in its scope ofeducation and organization.Now it becomesone of China’s key universities of scienceand engineering with 18 departments and38 specialities.In addition it has 20 researchinstitutes and about one hundred laboratories.The department of metallurgy and ma-terials engineering of Chongqing University

Research of the Application of Nanometer Materials in Sports Engineering and the Biological Safety

In the modern material engineering, the use of nanometer materials has entered the highly and intensively utilized stage, so new nanometer materials have been continuously found to replace the traditional ordinary materials. The so-called nanometer materials have the size within l - 100nm in thickness, which originates from the 1980s. At that time, nanometer materials didn＇t have a proper development due to the economic level. t towever, with the support of science and technology, this technology has undergone tremendous changes in the related fields. There have been increasing expansion in the kinds and the width in use of the nanometer materials, so have the research of nanometer materials. In this paper, we will briefly analyze the application ofnanometer materials in the sports engineering.

Applications-Some Influences of Engineering Ideas on Biology Being the fifth in a series of essays on the materials of nature

Ideas from engineering have helped the understanding of biological organisms for thousands of years. However, the mechanical aspects of biological materials and structures can, if properly interpreted and analysed, lead to a deeper understanding of the biology of organisms. Such an approach, although always current in some form, is nevertheless subject to the vagaries of fashion and the availability of analytical techniques. At present we are in a period of upturn. Areas of interest are deployable structures （applications in aerospace）, palaeontology （how little do we need to know in order to create a credible biosphere） and food science （we need a rational approach to the mechanics of food）.

ENGINEERING MECHANICS AND MATERIALS RESEARCH IN THE INFORMATION TECHNOLOGY AGE

In this paper, importance of information technology research and development for economic growth and prosperity is presented. Major missio of the research for fundamental science and engineering base is discussed. Critical points of the mechanics and materials research in the 21st Century are proposed.

Intercalation Assembly and Chemical Product Engineering of Layered Intercalated Functional Materials Based on Efficient Utilization of Magnesium Resources in Salt Lakes

1 Introduction Magnesium salts are very important by-product of salt lake industry in West China.Nearly 200 million cubic meters of waste brine are released to the environment

National Joint Engineering Research Center of High Performance Metal Wear Resistant Materials Technology

Founded in 2012, the National Joint Engineering Research Center of High Performance Metal Wear Resistant Materials Technology at Jinan University, one of the"211"key national universities in China, specializes in the research and development of iron based wear resistant materials and their casting technologies to provide support to the production process.

Examination of the Thermal Cloaking Effectiveness with Layered Engineering Materials

The concentrically layered thermal cloaks with isotropic materials could realize the equivalent thermal cloaking effect with Pendry＇s cloak, while the effectiveness is scarcely investigated quantitatively. Here we examine the cloaking effectiveness quantitatively by evaluating the standard deviation of the temperature difference between the simulated plane with the layered thermal cloak and Pendry＇s thermal cloak. The design rules for the isotropic materials in terms of thermal conductivity and layer thickness are presented. The present method could quan- titatively evaluate the cloaking effectiveness, and could open avenues for analyzing the cloaking effect, detecting the （anti-） cloaks, etc.

Energy band and charge-carrier engineering in skutterudite thermoelectric materials

The binary CoSb_(3) skutterudite thermoelectric material has high thermal conductivity due to the covalent bond between Co and Sb, and the thermoelectric figure of merit, ZT, is very low. The thermal conductivity of CoSb_(3) materials can be significantly reduced through phonon engineering, such as low-dimensional structure, the introduction of nano second phases,nanointerfaces or nanopores, which greatly improves their ZT values. The phonon engineering can optimize significantly the thermal transport properties of CoSb_(3)-based materials. However, the improvement of the electronic transport properties is not obvious, or even worse. Energy band and charge-carrier engineering can significantly improve the electronic transport properties of CoSb_(3)-based materials while optimizing the thermal transport properties. Therefore, the decoupling of thermal and electronic transport properties of CoSb_(3)-based materials can be realized by energy band and charge-carrier engineering. This review summarizes some methods of optimizing synergistically the electronic and thermal transport properties of CoSb_(3) materials through the energy band and charge-carrier engineering strategies. Energy band engineering strategies include band convergence or resonant energy levels caused by doping/filling. The charge-carrier engineering strategy includes the optimization of carrier concentration and mobility caused by doping/filling, forming modulation doped structures or introducing nano second phase. These strategies are effective means to improve performance of thermoelectric materials and provide new research ideas of development of high-efficiency thermoelectric materials.

National Joint Engineering Research Center of High Performance Metal Wear Resistant Materials Technology

Founded in 2012,the National Joint Engineering Research Center of High Performance Metal Wear Resistant Materials Technology at Jinan University,one of the'211'key national universities in China,specializes in the research and development of iron based wear resistant materials and their casting technologies to provide support to the production process.The Research Center serves the'Guangdong Province Ceeusro Innovation Platform for Common Technology of High Performance Wear Resistant Materials”,“Guangdong Province Engineering Research Center for Wear Resistant and Special Functional Materials”.

Creative Economy and Materials Science & Engineering

New materials are fundamental to the growth,security,and quality of life of human being sand open doors to technologies in civil,chemical,nuclear,aeronautical,mechanical,biomedical,and electrical engineering.Creative companies use multiple materials in the development of their activities,such as solid stone,fiber glass,concrete,and glass reinforced concrete,for example.Based on bibliographic research,the article examines the synergy between materials science&engineering and creative economy.The main argument indicates that this synergy creates solutions and functionalities that add value to existing products and allow the development of new products with competitive advantages.It may also contribute to the preservation of cultural values and promote sustainability.