Synthesis and Characterization of Nonionic Waterborne Polyurethane and Application to Wool Fabric Finishing

A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.

Effect of nonionic surfactants in release media on accelerated in-vitro release profile of sirolimus eluting stents with biodegradable polymeric coating

It is a well-known fact that sirolimus(SRL) undergoes degradation process via hydrolysis in aqueous media, leading to incorrect assessment of drug amount and thus release characteristics of formulations.The main objective of the present study was to evaluate the effect of nonionic surfactants in media on invitro release profiles for sirolimus eluting stents(SES) coated with biodegradable polymeric matrix.Phosphate buffer and acetate buffer incorporating nonionic surfactants with varying concentrations were examined for adequate solubility and stability(by RP-HPLC). Good sink condition was achieved in phosphate buffer(at pH 4.0) with 1.0% Tween 20, 1.0% Brij 35% and 0.5% Brij 58. Hydrodynamic size(by DLS) and the micelle-water partition coefficient(P) with standard free energy of solubilization(ΔGs°) of drug were evaluated to get some understanding about the solubilization phenomena. About 80% of drug release during the period of 48 h was achieved in optimized drug release media which was 1.0% Tween20 in phosphate buffer pH 4.0. The obtained accelerated SRL release profile in optimized medium correlated well with the real time in-vitro release in phosphate buffer(pH 7.4). Surface morphology changes(by SEM), changes in gravimetric weights and molecular weight change(by GPC) were examined before and after drug release to understand the drug release mechanism which explains that the polymer did not undergo degradation during the drug release.

CALORIMETRIC STUDIES ON THE STRUCTURE OF MICROEMULSION WITH NONIONIC SURFACTANT

Enthalpic studies on the state of water in hex-adecane/hexanol/ AEO8/water system have been conducted. The results show that water exists in three states such as bound water,trap water and free water. The enthalpic effect of condition that water to oil ratio is in the abnormal rheology region, the negative thixotropy of the system is directly proportional to the enthalpy.

Synthesis and Characterization of Copper Nanoparticles by Bis-(Acetylacetonato)-Copper (II) Using Nonionic Surfactants and the Effect of Their Structures on Nanoparticles Size and Yield

Between all precursors of copper complex, bis-(acetylacetonato)-copper (II) and bis-oxalate copper (II) with very close structures are two of the best representatives for copper nanoparticles synthesis. In this research, only bis-(acetylacetonato)-copper (II) in presence of some effective non-ionic surfactants such as Triton X-100, Dodecylamine, Tween 80 and also triphenylphosphine as a reducing agent via thermal decomposition process was used for copper nanopaticles synthesis. Two shif-base E19 and E22 complexes were also used for the investigation of these kinds of shif-base complexes capabilities by this method as precursors and all results were compared with each other. Between all surfactants, Triton X-100 gave the best yield with the largest grains. The techniques used for characterization of copper nanoparticles were TEM, EDX, FT-IR and XRD. TG-DTA and CV were used for characterization of bis-(acetylacetonato)-copper (II) complex.

Physical and Dielectric Properties of Some Nonionic Surfactants

脂肪酸酉旨被反应准备了有聚乙二醇让变化的酸 C//1//8 由直接酯化作用反应方法 oxyethylene 单位(4-88 单位) 数。出现，界面的紧张以各种各样的试验性的条件被学习，包括，集中，温度和表面活化剂的化学宪法。各个占据的临界胶团浓度(CMC ) ，表面过量和剩余区域出现活跃代理人分子 A 被使用 Gibb 的方程计算了。从 10 ～ 55 的 CMC 价值范围为所有学习代理人减 **5 mole/L 由 10** 乘了，当每个分子占据的剩余区域从 0.6 ～ 1.5 nm **2 变化时。一些有温度的这些代理人的 CMC 的变化也被检验了，获得的数据被用来在 micellization 三角洲 S//m 期间计算 micellization 三角洲 H//m 和熵变化的热。三角洲 H//m 的价值从 14.63 kJ/mole 变化到在考虑下面取决于代理人的化学体质的 2.717 kJ/ 鼹鼠。三表面活化剂的明显的偶极子时刻亩被测量跟随 Headstrand 的方法。(编辑作者摘要) 23 个裁判员。

Nonionic surfactant vesicular systems for effective drug delivery—an overview

Vesicular systems are a novel means of drug delivery that can enhance bioavailability of encapsulated drug and provide therapeutic activity in a controlled manner for a prolonged period of time.Liposomes were the first such system but they suffer from a number of drawbacks including high cost and lack of stability at various pHs.Niosomes are a nonionic surfactant vesicular system,which can be easily and reliably made in the laboratory.Many factors affect noisome formation such as the method of manufacture,nature of surfactant and encapsulated drug,temperature at which the lipids are hydrated and the critical packing parameter.This review describes all aspects of niosomes including their different compositions,the various methods of preparation,the effect of changing manufacturing parameters,methods of characterization,factors that affect their stability,their use by various routes of administration,their therapeutic applications and the most important patents.The review also provides detailed information of the various types of niosomes that provide effective drug delivery.

Experimental investigation of wettability alteration on residual oil saturation using nonionic surfactants: Capillary pressure measurement

Introducing the novel technique for enhancing oil recovery from available petroleum reservoirs is one of the important issues in future energy demands.Among of all operative factors,wettability may be the foremost parameter affecting residual oil saturation in all stage of oil recovery.Although wettability alteration is one of the methods which enhance oil recovery from the petroleum reservoir.Recently,the studies which focused on this subject were more than the past and many contributions have been made on this area.The main objective of the current study is experimentally investigation of the two nonionic surfactants effects on altering wettability of reservoir rocks.Purpose of this work is to change the wettability to preferentially the water-wet condition.Also reducing the residual oil saturation(Sor)is the other purpose of this work.The wettability alteration of reservoir rock is measured by two main quantitative methods namely contact angle and the USBM methods.Results of this study showed that surfactant flooding is more effective in oil-wet rocks to change their wettability and consequently reducing Sor to a low value.Cedar(Zizyphus Spina Christi)is low priced,absolutely natural,and abundantly accessible in the Middle East and Central Asia.Based on the results,this material can be used as a chemical surfactant in field for enhancing oil recovery.

The effect of nanosilica sizes in the presence of nonionic TX100 surfactant on CO_(2)foam flooding

The aim of this research is to study the effect of hydrophilic silica nanoparticles,sizes as CO_(2) foam stabilizer in the presence of nonionic TX100 surfactant.Two nanosilica sizes,15 and 70 nm,have been examined thoroughly.Physisorption of TX100 on silica nanoparticles(nanosilica)was characterized by adsorption isotherm and surface tension measurement,while CO_(2) foams stability was quantified based on their foamability,foam stability,particle partitioning in the foams,and bubble sizes.Results show that direct contact of TX100 with nanosilica does altered the wettability of hydrophilic nanosilica surface,enable them to lengthen CO_(2) foams life at certain surfactant and nanoparticles concentrations.For 15 nm nanosilica,CO_(2) foam stability shows excellent performance at 0.1 and 0.5 wt%TX100 concentrations.As for 70 nm nanosilica,CO_(2) foam demonstrates longer lifetime at much lower TX100 concentration,0.01 wt%.Without the presence of TX100,CO_(2) foams exhibit undesirable lifetime performances for both nanosilica sizes.Nanosilica partitioning in CO_(2) foams structures demonstrate consistent relation with contact angle measurement.Estimated bubble sizes shows insignificant effect on CO_(2) foams life.With the assists of nanosilica and TX100,enhanced oil recovery via CO_(2) foam injection succeeds in increasing oil production by 13e22%of original oil-in-place(OOIP).

The Effect of Adjuvants on Penetration of beta-cypermethrin Through the Epidermis of Cabbage Leaf

The effects of three types of adjuvant (mineral oil, higher aliphatic acid and nonionic surfactant) on the penetration of beta-cypermethrin through the cabbage leaf surface were studied. The results showed that the penetration was positively correlated with both the concentration of adjuvant and the time after application, in a given range of treatment. A synergistic effect of two types of adjuvant on the penetration was found. Some physical properties of emulsions were determined. The change of the structures of the cabbage leaf surface by these adjuvants was observed from photomicrographs. The mechanism concerned with the effect of these adjuvants on the penetration of beta-cypermethrin through the cabbage leaf surface was tentatively discussed.

Synthesis and Properties of Novel Non-Ionic Polyurethane Dispersion Based on Hydroxylated Tung Oil and Alicyclic Isocyanates

Hydroxylated Tung oil (HTO) based nonionic polyurethane dispersion (HTO-NPUD) were synthesized using dicyclohexyl methane diisocyanate (HMDI) and HTO as main hydrophobic materials whereas polyethylene glycol-800 (PEG-800) as hydrophilic chain extender. To effectively study the effects of HTO on properties of NPUD, polypropylene glycol-400(PPG-400) based NPUD was prepared by HMDI reacting with PPG-400 and PEG-800. The structures of those novel nonionic polyurethane dispersions were characterized by FTIR and 1H NMR. Moreover, particle size and size distribution, cloud point and surface tension had been investigated. Results showed that, by comparing with PPG based NPUD (PPG-NPUD), the introduction of HTO into NPUD result in larger particle size and more uniformed particle size distribution, higher cloud point and lower surface tension.

Preparation and Characterization of In_2O_3 Nanorods

In_2O_3 nanorods were prepared by sol-gel technique with nonionic surfactant controlling their morphology,and were characterized by TEM,TG-DSC and XRD.The results indicated that In_2O_3 nanorods had the length of about 120 nm and diameter of 20 nm.The In_2O(OH)_4 dried gelatin was formed by partial dehydrating of In(OH)_3 molecules.The factors influencing the morphology of In_2O_3 nanorods and their growth mechanism were discussed.The geometry array parameter P of the nonionic surfactant was between 1/3～1/2 through calculation,which confirmed that the shape of the micelle was claviform.

Transient global amnesia after epiduroscopy in a failed back surgery syndrome patient: Case report

Epiduroscopy (EDS) allows diagnosis and treatment of spinal nerve root pathology by a fiberoptic device inserted percutaneously in the epidural space. Transient global amnesia syndrome (TGA) is defined by an abrupt onset of an anterograde and retrograde amnesia that lasts up to 24 h, although mild subclinical neuropsychological deficits, with concomitant vegetative symptoms, can last for days after the episode. To our knowledge no cases of TGA in association with EDS have been recognized. We present a case of a 54-year-old man who was admitted for EDS, having experienced two times the failed surgery for spinal and left leg pain. During the EDS, 10 ml of non-ionic contrast media (CM) was injected to confirm the inside lesions. The epidural adhesions were gently broken down and drugs were injected around any inflamed nerve roots. Immediately after EDS, the patient experienced a TGA with loss of memory for the recent procedure and an impaired ability to retain new information. There were no signs of confusion or altered conscious level or seizure activities and neurological examination was normal. At 24 h a cranial computerized tomography (cCT) without CM showed “abnormal contrast enhancement at subarachnoid liquoral spaces levels”, then at 72 h cCT control was normal. The patient was discharged on the seventh day with perioperative lacunar amnesia persisting at this time. Herein, we sought a possible relationship between neurotoxic effect of CM and TGA in a patient emotionally stressed, even if the CM dose was given as a normal clinical range.

Fatty Acids in Heterocyclic Synthesis. Part XVII: Synthesis of Non Ionic Surfactants Containing Piperidine, Piperazine, Imidazole Based on Thiadiazole and Microbiological Activities Evaluation

A series of novel scaffolds Thiadiazolyl Piperidine, Thiadiazolyl Piperazine, thiadiazolidine, Thiadiazolyl thiazole and Thiadiazolyl-imidazole-Thione were synthesized from cheap, available and biologically active stearic acid. 2-amino-5-heptadecyl 1,3,4-thiadiazole reacts with chloroacetyl chloride and produced 2-choloro-N-(5-heptadecyl-1,3,4-Thiadiazole-2-yl) acetamide. Which allowed to react with Piperidine, Piperazine, urea and/or Thiourea and Potassium thiocyanate, and the latest scaffolds have been synthesized, respectively, and the structures of these compounds were established by elemental analysis, MS, IR and 1H-NMR spectral data. The antimicrobial activities of the synthesized compounds were evaluated in-vitro against strains of gram +ve, gram -ve bacteria and fungi. Nonionic surfactant were obtained by addition of different moles of propylene oxide (3,5,7 mole) to the synthesized compounds bearing an active hydrogen. Physico-chemical and surface properties as well as biodegradability of the synthesized non-ionic surfactants were evaluated.

Surfactant 4-nonylphenyl-polyethylene glycol stimulates reactive oxygen species generation and apoptosis in human neuroblastoma cells

The formulation of most pesticides is proprietary and individual components are therefore not generally known. In a preliminary study, we identified six compounds that are often present in pesticides, of which 4-nonylphenyl-polyethylene glycol(NP-40) was found to be the most toxic. In this study, we investigated the toxicity of NP-40 and underlying mechanism in neuronal SK-N-SH cells. Exposure to NP 40 at concentrations higher than60 μmol/L for 24 hr decreased cell viability. The cytotoxicity of NP-40 was time-and concentration-dependent. Nuclear fragmentation and chromatin condensation were apparent starting at 50 μmol/L NP-40, and increased at higher concentrations. The expression of apoptotic factors including p53 and B-cell lymphoma(Bcl)-2-associated X protein was upregulated, while that of the anti-apoptotic marker Bcl-2 was downregulated at 80 μmol/L NP-40. Cytochrome c release was observed from 80 to 100 μmol/L by confocal microscopy. Caspase-9 and-3/7 activities increased according to concentration, and fluorescence-activated cell sorting analysis showed that apoptosis was induced at50 μmol/L and was increased at 80 μmol/L. Our findings indicate that NP-40 stimulates the mitochondrial-mediated apoptosis pathway and reactive oxygen species production in a concentration-dependent manner, and suggest that antioxidant administration may be an effective treatment for patients with acute NP-40 poisoning.