Comparison of nonlinear modeling methods for the composite rubber clamp

The cubic stiffness force model(CSFM)and Bouc-Wen model(BWM)are introduced and compared innovatively.The unknown coefficients of the nonlinear models are identified by the genetic algorithm combined with experiments.By fitting the identified nonlinear coefficients under different excitation amplitudes,the nonlinear vibration responses of the system are predicted.The results show that the accuracy of the BWM is higher than that of the CSFM,especially in the non-resonant region.However,the optimization time of the BWM is longer than that of the CSFM.

NONLINEAR MODELING AND CONTROLLING OF ARTIFICIAL MUSCLE SYSTEM USING NEURAL NETWORKS

The pneumatic artificial muscles are widely used in the fields of medicalrobots, etc. Neural networks are applied to modeling and controlling of artificial muscle system. Asingle-joint artificial muscle test system is designed. The recursive prediction error (RPE)algorithm which yields faster convergence than back propagation (BP) algorithm is applied to trainthe neural networks. The realization of RPE algorithm is given. The difference of modeling ofartificial muscles using neural networks with different input nodes and different hidden layer nodesis discussed. On this basis the nonlinear control scheme using neural networks for artificialmuscle system has been introduced. The experimental results show that the nonlinear control schemeyields faster response and higher control accuracy than the traditional linear control scheme.

Characterization and identification towards dynamic-based electrical modeling of lithium-ion batteries

Lithium-ion batteries are widely recognized as a crucial enabling technology for the advancement of electric vehicles and energy storage systems in the grid.The design of battery state estimation and control algorithms in battery management systems is usually based on battery models,which interpret crucial battery dynamics through the utilization of mathematical functions.Therefore,the investigation of battery dynamics with the purpose of battery system identification has garnered considerable attention in the realm of battery research.Characterization methods in terms of linear and nonlinear response of lithium-ion batteries have emerged as a prominent area of study in this field.This review has undertaken an analysis and discussion of characterization methods,with a particular focus on the motivation of battery system identification.Specifically,this work encompasses the incorporation of frequency domain nonlinear characterization methods and dynamics-based battery electrical models.The aim of this study is to establish a connection between the characterization and identification of battery systems for researchers and engineers specialized in the field of batteries,with the intention of promoting the advancement of efficient battery technology for real-world applications.

Nonlinear Mathematical Modeling and Sensitivity Analysis of Hydraulic Drive Unit

The previous sensitivity analysis researches are not accurate enough and also have the limited reference value, because those mathematical models are relatively simple and the change of the load and the initial displacement changes of the piston are ignored, even experiment verification is not conducted. Therefore, in view of deficiencies above, a nonlinear mathematical model is established in this paper, including dynamic characteristics of servo valve, nonlinear characteristics of pressure-flow, initial displacement of servo cylinder piston and friction nonlinearity. The transfer function block diagram is built for the hydraulic drive unit closed loop position control, as well as the state equations. Through deriving the time-varying coefficient items matrix and time-varying free items matrix of sensitivity equations respectively, the expression of sensitivity equations based on the nonlinear mathematical model are obtained. According to structure parameters of hydraulic drive unit, working parameters, fluid transmission characteristics and measured friction-velocity curves, the simulation analysis of hydraulic drive unit is completed on the MATLAB/Simulink simulation platform with the displacement step 2 mm, 5 mm and 10 mm, respectively. The simulation results indicate that the developed nonlinear mathematical model is sufficient by comparing the characteristic curves of experimental step response and simulation step response under different constant load. Then, the sensitivity function time-history curves of seventeen parameters are obtained, basing on each state vector time-history curve of step response characteristic. The maximum value of displacement variation percentage and the sum of displacement variation absolute values in the sampling time are both taken as sensitivity indexes. The sensitivity indexes values above are calculated and shown visually in histograms under different working conditions, and change rules are analyzed. Then the sensitivity indexes values of four measurable parameters, such as supply pressure, proportional gain, initial position of servo cylinder piston and load force, are verified experimentally on test platform of hydraulic drive unit, and the experimental research shows that the sensitivity analysis results obtained through simulation are approximate to the test results. This research indicates each parameter sensitivity characteristics of hydraulic drive unit, the performance-affected main parameters and secondary parameters are got under different working conditions, which will provide the theoretical foundation for the control compensation and structure optimization of hydraulic drive unit.

Dynamic optimization oriented modeling and nonlinear model predictive control of the wet limestone FGD system

Nonlinear model predictive control(NMPC)scheme is an effective method of multi-objective optimization control in complex industrial systems.In this paper,a NMPC scheme for the wet limestone flue gas desulphurization(WFGD)system is proposed which provides a more flexible framework of optimal control and decision-making compared with PID scheme.At first,a mathematical model of the FGD process is deduced which is suitable for NMPC structure.To equipoise the model’s accuracy and conciseness,the wet limestone FGD system is separated into several modules.Based on the conservation laws,a model with reasonable simplification is developed to describe dynamics of different modules for the purpose of controller design.Then,by addressing economic objectives directly into the NMPC scheme,the NMPC controller can minimize economic cost and track the set-point simultaneously.The accuracy of model is validated by the field data of a 1000 MW thermal power plant in Henan Province,China.The simulation results show that the NMPC strategy improves the economic performance and ensures the emission requirement at the same time.In the meantime,the control scheme satisfies the multiobjective control requirements under complex operation conditions(e.g.,boiler load fluctuation and set point variation).The mathematical model and NMPC structure provides the basic work for the future development of advanced optimized control algorithms in the wet limestone FGD systems.

Mathematical Constraints in Multiscale Subgrid-Scale Modeling of Nonlinear Systems

To shed light on the subgrid-seale （SGS） modeling methodology of nonlinear systems such as the Navier-Stokes turbulence, we define the concepts of assumption and restriction in the modeling procedure, which are shown by generalized derivation of three general mathematical constraints for different combinations of restrictions. These constraints are verified numerically in a one-dimensional nonlinear advection equation. This study is expected to inspire future research on the SGS modeling methodology of nonlinear systems.

Nonlinear Modeling and Analysis of a Novel Robot Fish with Compliant Fluidic Actuator as a Tail

Compliant mobile robotics is a developing bioinspired concept of propulsion for locomotion.This paper studies the modeling and analysis of a compliant tail-propelled fish-like robot.This biomimetic design uses a fluid-filled network of channels embedded into the soft body to actuate the compliant tail and generate thrust.This study analyzes the nonlinear dynamics of Fish Tail Fluidic Actuator(FTFA).The fluidic expansion under pressure creates a bending moment in the tail.It is demonstrated that the tail response follows the theoretical formulation extracted from the accurate modeling.In this modeling,tail is assumed as a continuous Euler–Bernoulli beam considering large deflection and nonlinear strain.Then,the implementation of Hamilton's principle and the method of calculation lead to the motion equations.The assumed mode method is used to achieve the mathematical model in the multi-mode system that is more similar to the soft continuous system.We investigate the tendencies of the tail amplitude,swimming speed,and Strouhal number when the input driving frequency changes.The simulation results disclose that high swimming efficiency can be obtained at the multi-order resonances;meanwhile,the compliant fish robot is pushed at the corresponding frequency illustrating nonlinear behavior.

Nonlinear free vibration of piezoelectric semiconductor doubly-curved shells based on nonlinear drift-diffusion model

In this paper, the nonlinear free vibration behaviors of the piezoelectric semiconductor(PS) doubly-curved shell resting on the Pasternak foundation are studied within the framework of the nonlinear drift-diffusion(NLDD) model and the first-order shear deformation theory. The nonlinear constitutive relations are presented, and the strain energy, kinetic energy, and virtual work of the PS doubly-curved shell are derived.Based on Hamilton's principle as well as the condition of charge continuity, the nonlinear governing equations are achieved, and then these equations are solved by means of an efficient iteration method. Several numerical examples are given to show the effect of the nonlinear drift current, elastic foundation parameters as well as geometric parameters on the nonlinear vibration frequency, and the damping characteristic of the PS doublycurved shell. The main innovations of the manuscript are that the difference between the linearized drift-diffusion(LDD) model and the NLDD model is revealed, and an effective method is proposed to select a proper initial electron concentration for the LDD model.

Pre-compensation of Friction for CNC Machine Tools through Constructing a Nonlinear Model Predictive Scheme

Nonlinear friction is a dominant factor afecting the control accuracy of CNC machine tools.This paper proposes a friction pre-compensation method for CNC machine tools through constructing a nonlinear model predictive scheme.The nonlinear friction-induced tracking error is frstly modeled and then utilized to establish the nonlinear model predictive scheme,which is subsequently used to optimize the compensation signal by treating the friction-induced tracking error as the optimization objective.During the optimization procedure,the derivative of compensation signal is constrained to avoid vibration of machine tools.In contrast to other existing approaches,the proposed method only needs the parameters of Stribeck friction model and an additional tuning parameter,while fnely identifying the parameters related to the pre-sliding phenomenon is not required.As a result,it greatly facilitates the practical applicability.Both air cutting and real cutting experiments conducted on an in-house developed open-architecture CNC machine tool prove that the proposed method can reduce the tracking errors by more than 56%,and reduce the contour errors by more than 50%.

Nonlinear Control of Magnetically Coupled Rodless Cylinder Position Servo System

Magnetically coupled rodless cylinders are widely used in the coordinate positioning of mechanical arms,electro-static paintings,and other industrial applications.However,they exhibit strong nonlinear characteristics,which lead to low servo control accuracy.In this study,a mass-flow equation through the valve port was derived to improve the control performance,considering the characteristics of the dynamics and throttle-hole flow.Subsequently,a fric-tion model combining static,viscous,and Coulomb friction with a zero-velocity interval was proposed.In addition,energy and dynamic models were set for the experimental investigation of the magnetically coupled rodless cylin-der.A nonlinear mathematical model for the position of the magnetically coupled rodless cylinder was proposed.An incremental PID controller was designed for the magnetically coupled rodless cylinder to control this system,and the PID parameters were adjusted online using RBF neural network.The response results of the PID parameters based on the RBF neural network were compared with those of the traditional incremental PID control,which proved the superiority of the optimization control algorithm of the incremental PID parameters based on the RBF neural network servo control system.The experimental results of this model were compared with the simulation results.The average error between the established model and the actual system was 0.005175054(m),which was approximately 2.588%of the total travel length,demonstrating the accuracy of the theoretical model.

The effects of cold region meteorology and specific environment on the number of hospital admissions for chronic kidney disease:An investigate with a distributed lag nonlinear model

Objective:To explore the effects of daily mean temperature(°C),average daily air pressure(hPa),humidity(%),wind speed(m/s),particulate matter(PM)2.5(μg/m3)and PM10(μg/m3)on the admission rate of chronic kidney disease(CKD)patients admitted to the Second Affiliated Hospital of Harbin Medical University in Harbin and to identify the indexes and lag days that impose the most critical influence.Methods:The R language Distributed Lag Nonlinear Model(DLNM),Excel,and SPSS were used to analyze the disease and meteorological data of Harbin from 01 January 2010 to 31 December 2019 according to the inclusion and exclusion criteria.Results:Meteorological factors and air pollution influence the number of hospitalizations of CKD to vary degrees in cold regions,and differ in persistence or delay.Non-optimal temperature increases the risk of admission of CKD,high temperature increases the risk of obstructive kidney disease,and low temperature increases the risk of other major types of chronic kidney disease.The greater the temperature difference is,the higher its contribution is to the risk.The non-optimal wind speed and non-optimal atmospheric pressure are associated with increased hospital admissions.PM2.5 concentrations above 40μg/m3 have a negative impact on the results.Conclusion:Cold region meteorology and specific environment do have an impact on the number of hospital admissions for chronic kidney disease,and we can apply DLMN to describe the analysis.

Design of a Computational Heuristic to Solve the Nonlinear Liénard Differential Model

In this study,the design of a computational heuristic based on the nonlinear Liénard model is presented using the efficiency of artificial neural networks(ANNs)along with the hybridization procedures of global and local search approaches.The global search genetic algorithm(GA)and local search sequential quadratic programming scheme(SQPS)are implemented to solve the nonlinear Liénard model.An objective function using the differential model and boundary conditions is designed and optimized by the hybrid computing strength of the GA-SQPS.The motivation of the ANN procedures along with GA-SQPS comes to present reliable,feasible and precise frameworks to tackle stiff and highly nonlinear differentialmodels.The designed procedures of ANNs along with GA-SQPS are applied for three highly nonlinear differential models.The achieved numerical outcomes on multiple trials using the designed procedures are compared to authenticate the correctness,viability and efficacy.Moreover,statistical performances based on different measures are also provided to check the reliability of the ANN along with GASQPS.

Degenerate States in Nonlinear Sigma Model with SU(2) Symmetry

Entanglement in quantum theory is a peculiar concept to scientists. With this concept we are forced to re-consider the cluster property which means that one event is irrelevant to another event when they are fully far away. In the recent works we showed that the quasi-degenerate states induce the violation of cluster property in antiferromagnets when the continuous symmetry breaks spontaneously. We expect that the violation of cluster property will be observed in other materials too, because the spontaneous symmetry breaking is found in many systems such as the high temperature superconductors and the superfluidity. In order to examine the cluster property for these materials, we studied a quantum nonlinear sigma model with U(1) symmetry in the previous work. There we showed that the model does have quasi-degenerate states. In this paper we study the quantum nonlinear sigma model with SU(2) symmetry. In our approach we first define the quantum system on the lattice and then adopt the representation where the kinetic term is diagonalized. Since we have no definition on the conjugate variable to the angle variable, we use the angular momentum operators instead for the kinetic term. In this representation we introduce the states with the fixed quantum numbers and carry out numerical calculations using quantum Monte Carlo methods and other methods. Through analytical and numerical studies, we conclude that the energy of the quasi-degenerate state is proportional to the squared total angular momentum as well as to the inverse of the lattice size.

Smoothed Empirical Likelihood Inference for Nonlinear Quantile Regression Models with Missing Response

In this paper, three smoothed empirical log-likelihood ratio functions for the parameters of nonlinear models with missing response are suggested. Under some regular conditions, the corresponding Wilks phenomena are obtained and the confidence regions for the parameter can be constructed easily.

Tool Condition Monitoring Based on Nonlinear Output Frequency Response Functions and Multivariate Control Chart

Tool condition monitoring(TCM)is a key technology for intelligent manufacturing.The objective is to monitor the tool operation status and detect tool breakage so that the tool can be changed in time to avoid significant damage to workpieces and reduce manufacturing costs.Recently,an innovative TCM approach based on sensor data modelling and model frequency analysis has been proposed.Different from traditional signal feature-based monitoring,the data from sensors are utilized to build a dynamic process model.Then,the nonlinear output frequency response functions,a concept which extends the linear system frequency response function to the nonlinear case,over the frequency range of the tooth passing frequency of the machining process are extracted to reveal tool health conditions.In order to extend the novel sensor data modelling and model frequency analysis to unsupervised condition monitoring of cutting tools,in the present study,a multivariate control chart is proposed for TCM based on the frequency domain properties of machining processes derived from the innovative sensor data modelling and model frequency analysis.The feature dimension is reduced by principal component analysis first.Then the moving average strategy is exploited to generate monitoring variables and overcome the effects of noises.The milling experiments of titanium alloys are conducted to verify the effectiveness of the proposed approach in detecting excessive flank wear of solid carbide end mills.The results demonstrate the advantages of the new approach over conventional TCM techniques and its potential in industrial applications.

Accurate Torque Modeling With PSO-Based Recursive Robust LSSVR for a Segmented-Rotor Switched Reluctance Motor

In order to improve the reliability in torque calculation of SRM,an accurate nonlinear torque model regresses by recursive robust least squares support vector regression(RR-LSSVR)is proposed in this paper.The model is in terms of a segmented-rotor switched reluctance motor(SSRM).The characteristics of the SSRM is introduced to show its nonlinear characteristics both in magnetic and torque.Then,its mathematic model is established,and an accurate inductance measurement method and a torque calculation method are presented.After this,the principle of the RR-LSSVR and why it can adjust weights according to errors are described.The model used the RR-LSSVR algorithm shows an outstanding capability in accuracy and quickness compared with other algorithms.Finally,to further validate the accuracy of the proposed model in practical application,simulation and experiment are designed based on a 16/10 SSRM.

Different responses of two adjacent artificial beaches to Typhoon Hato in Zhuhai,China

Major differences in beach erosion between two neighboring artificial beaches Xiangluwan Beach(XL beach)and Meiliwan Beach(ML beach)in Zhuhai,China,were studied after Super Typhoon Hato.In this study,a fully nonlinear Boussinesq wave model(FUNWAVE)-Total Variation Diminishing(TVD)was used to distinguish the main impact factors,their relative contributions,and the hydrodynamic mechanisms underlying the different beach responses.Results show that compared to the ML beach,the main reason for the relatively weak erosion on Xiangluwan(XL)beach was the smaller beach berm height(accounting for approximately 75.9%of the erosion response).Regarding the beach with a higher berm,the stronger wave-induced undertow flow,along with the higher sediment concentration,led to a higher offshore sediment transport flux,resulting in more severe erosion relative to the beach with a smaller berm height.The second most important reason explaining the weak erosion on XL beach was the absence of seawalls(accounting for approximately 17.9%of the erosion response).Wave reflection induced by the seawall could cause higher suspended sediment concentration,resulting in a toe scouring near the seawall.The offshore submerged breakwater protected XL beach slightly(accounting for approximately 6.1%of the erosion response).Due to the higher water level induced by storm surge,most of the wave energy could penetrate through the submerged breakwater.The effect of the larger berm width of XL beach was negligible.Compared to the beach with a larger berm width,the erosion/deposition regions in the beach with a narrower berm width showed shoreward migration,without significant changes in the erosion/deposition extent.Despite of this,the larger berm width could reduce the wave energy reaching the shoreline.This study of the storm stability of artificial beaches may be applied to beach restoration design.

Modeling and Stability Analysis for Dual-Spinning Projectiles with Canards

To develop the guided spin-stabilized projectiles with high hit precision,a class of dual-spinning stabilized projectile equipped with canards in atmospheric is studied.The 7 degrees of freedom(DOF) nonlinear equations are written in a non-rolling body frame.The work reported here focuses on the ballistic property analysis including the spin rates,incidence angle,ballistic drift and lateral velocity.The dual-spinning projectiles are fundamentally less stable than conventional spin-stabilized projectiles.Hence,the gyroscopic stability is also studied in this paper.Theoretical models are given in this work,and the results of numerical analysis are discussed.

Robust Adaptive Gain Higher Order Sliding Mode Observer Based Control-constrained Nonlinear Model Predictive Control for Spacecraft Formation Flying

This work deals with the development of a decentralized optimal control algorithm, along with a robust observer,for the relative motion control of spacecraft in leader-follower based formation. An adaptive gain higher order sliding mode observer has been proposed to estimate the velocity as well as unmeasured disturbances from the noisy position measurements.A differentiator structure containing the Lipschitz constant and Lebesgue measurable control input, is utilized for obtaining the estimates. Adaptive tuning algorithms are derived based on Lyapunov stability theory, for updating the observer gains,which will give enough flexibility in the choice of initial estimates.Moreover, it may help to cope with unexpected state jerks. The trajectory tracking problem is formulated as a finite horizon optimal control problem, which is solved online. The control constraints are incorporated by using a nonquadratic performance functional. An adaptive update law has been derived for tuning the step size in the optimization algorithm, which may help to improve the convergence speed. Moreover, it is an attractive alternative to the heuristic choice of step size for diverse operating conditions. The disturbance as well as state estimates from the higher order sliding mode observer are utilized by the plant output prediction model, which will improve the overall performance of the controller. The nonlinear dynamics defined in leader fixed Euler-Hill frame has been considered for the present work and the reference trajectories are generated using Hill-Clohessy-Wiltshire equations of unperturbed motion. The simulation results based on rigorous perturbation analysis are presented to confirm the robustness of the proposed approach.

Feedback linearization of the nonlinear model of a small-scale helicopter

In order to design a nonlinear controller for small-scale autonomous helicopters, the dynamic characteristics of a model helicopter are investigated, and an integrated nonlinear model of a small-scale helicopter for hovering control is presented. It is proved that the nonlinear system of the small-scale helicopter can be transformed to a linear system using the dynamic feedback linearization technique. Finally, simulations are carried out to validate the nonlinear controller.