In this paper, a novel technique is presented for an FBG with the step-coated polymers, which can be used for the measurement of the temperature-independent pressure in the temperature range between 5 and 50℃.
In this paper, the basic principle and the design method of the bandwidth sensing of fiber grating are expounded, respectively. Several novel bandwidth sensor based fiber grating are analyzed and discussed.
A novel Cu(I) complex with the formula of [Cu(DPEphos)(Dicnq)]BF4(CuDD) was synthesized and characterized by X-ray single crystal diffraction method,in which DPEphos and Dicnq denote bis[2-(diphenylphosphino)phenyl]et...A novel Cu(I) complex with the formula of [Cu(DPEphos)(Dicnq)]BF4(CuDD) was synthesized and characterized by X-ray single crystal diffraction method,in which DPEphos and Dicnq denote bis[2-(diphenylphosphino)phenyl]ether and 6,7-Dicyanodipyrido[2,2-d:2 ,3 -f] quinoxaline,respectively.Organic ultraviolet optical sensor based on photovoltaic diode is fabricated by using CuDD as an electron acceptor and 4,4′,4″-tris-(2-methylphenyl phenylamino) triphenylamine(m-MTDATA) as an electron donor.The sensor is sensit...展开更多
In order to increase the multiplexing density of the fiber Bragg gratings （FBGs） for a low cost per-sensor, based on the analysis of the spectrum shadow distortion （SSD）, a novel successive demultiplexing scheme f...In order to increase the multiplexing density of the fiber Bragg gratings （FBGs） for a low cost per-sensor, based on the analysis of the spectrum shadow distortion （SSD）, a novel successive demultiplexing scheme for FBG sensors has been developed. It is based on the optical cade division multiple access （CDMA） balanced demodulation. A high-density multiplexing-demultiplexing system for FBG sensors has been designed, and corresponding simulation carried out has demonstrated that the FBG sensors＇ reflective signals can still be obtained accurately and respectively, even if FBG sensors＇ operating bandwidths heavily overlap. The SSD has been greatly mitigated.展开更多
The recent progresses of fiber sensor fabrication in our group are reviewed.Novel inline fiber Mach-Zehnder interferometer(MZI) sensors with various structures are proposed and manufactured by femtosecond laser fabric...The recent progresses of fiber sensor fabrication in our group are reviewed.Novel inline fiber Mach-Zehnder interferometer(MZI) sensors with various structures are proposed and manufactured by femtosecond laser fabrication and fusion splicing for high-quality sensing of refractivity-sensitive parameters such as temperature,concentration,humidity,pressure,stress and strain: a) for an MZI sensor with a trench on a single-mode fiber,the refractive index(RI) sensitivity of acetone vapor is about 104 nm/RIU(refractive index unit) and the temperature sensitivity is 51.5 pm/℃ from 200 to 875 ℃;b) For an MZI consisting of two micro-air-cavities,the sensitivity is 501.5 nm/RIU and the detection limit is 1.994×10-6 RIU at the refractive index of 1.4;c) to reduce the fabrication cost,a new fusion-splicing based method is proposed to fabricate MZI sensors;the sensitivity is 664.57 nm/RIU with a detection limit of 1.5×10-6 RIU and its cost is tens of times cheaper than those of commercialized long period fiber Gratings;Also,5×10-5 acetone vapors are successfully detected by the MZI sensors coated with zeolite thin films.展开更多
文摘In this paper, a novel technique is presented for an FBG with the step-coated polymers, which can be used for the measurement of the temperature-independent pressure in the temperature range between 5 and 50℃.
文摘In this paper, the basic principle and the design method of the bandwidth sensing of fiber grating are expounded, respectively. Several novel bandwidth sensor based fiber grating are analyzed and discussed.
基金supported by the Natural Science Foundationof Jilin Province (No.20060516)the Doctoral Foundation of JilinNormal University (No.2006006 and No.2007009)the Subject and Base Construction Foundation of Jilin Normal University (No.2006041)
文摘A novel Cu(I) complex with the formula of [Cu(DPEphos)(Dicnq)]BF4(CuDD) was synthesized and characterized by X-ray single crystal diffraction method,in which DPEphos and Dicnq denote bis[2-(diphenylphosphino)phenyl]ether and 6,7-Dicyanodipyrido[2,2-d:2 ,3 -f] quinoxaline,respectively.Organic ultraviolet optical sensor based on photovoltaic diode is fabricated by using CuDD as an electron acceptor and 4,4′,4″-tris-(2-methylphenyl phenylamino) triphenylamine(m-MTDATA) as an electron donor.The sensor is sensit...
基金supported by the Harbin Science Research Foundation under Grant No.2003AFQXJ004
文摘In order to increase the multiplexing density of the fiber Bragg gratings （FBGs） for a low cost per-sensor, based on the analysis of the spectrum shadow distortion （SSD）, a novel successive demultiplexing scheme for FBG sensors has been developed. It is based on the optical cade division multiple access （CDMA） balanced demodulation. A high-density multiplexing-demultiplexing system for FBG sensors has been designed, and corresponding simulation carried out has demonstrated that the FBG sensors＇ reflective signals can still be obtained accurately and respectively, even if FBG sensors＇ operating bandwidths heavily overlap. The SSD has been greatly mitigated.
基金supported by the National Natural Science Foundation of China(Nos.90923039 and 51025521)the 111 Project of China(No.B08043)
文摘The recent progresses of fiber sensor fabrication in our group are reviewed.Novel inline fiber Mach-Zehnder interferometer(MZI) sensors with various structures are proposed and manufactured by femtosecond laser fabrication and fusion splicing for high-quality sensing of refractivity-sensitive parameters such as temperature,concentration,humidity,pressure,stress and strain: a) for an MZI sensor with a trench on a single-mode fiber,the refractive index(RI) sensitivity of acetone vapor is about 104 nm/RIU(refractive index unit) and the temperature sensitivity is 51.5 pm/℃ from 200 to 875 ℃;b) For an MZI consisting of two micro-air-cavities,the sensitivity is 501.5 nm/RIU and the detection limit is 1.994×10-6 RIU at the refractive index of 1.4;c) to reduce the fabrication cost,a new fusion-splicing based method is proposed to fabricate MZI sensors;the sensitivity is 664.57 nm/RIU with a detection limit of 1.5×10-6 RIU and its cost is tens of times cheaper than those of commercialized long period fiber Gratings;Also,5×10-5 acetone vapors are successfully detected by the MZI sensors coated with zeolite thin films.
