Quantitative characterization of shale pore connectivity and controlling factors using spontaneous imbibition combined with nuclear magnetic resonance T_(2)and T_(1)-T_(2)

Shale oil can be extracted from shale by using interconnected pore networks.The migration of hydrocarbon molecules within the shale is controlled by pore connectivity.However,assessing the pore connectivity of shale oil reservoirs is uncommon.To characterize pore connectivity and clarify its controlling factors,this study used spontaneous imbibition(SI)combined with nuclear magnetic resonance(NMR)T_(2)and T_(1)-T_(2)technologies on shale oil reservoirs selected from the Shahejie Formation in the Dongying Sag,Bohai Bay Basin.According to the findings,the SI processes of shales include fast-rising,slow-rising,and stable stages.The fast-rising stage denotes pore connectivity.The shales studied have poor connectivity,with lower imbibition slopes and connected porosity ratios,but large effective tortuosity.During the SI process,micropores have the highest imbibition saturation,followed by mesopores and macropores.Furthermore,n-dodecane ingested into micropores appears primarily as adsorbed,whereas n-dodecane appears primarily as free states in mesopores and macropores during the SI process.The pore connectivity of the shales under study is primarily controlled by inorganic minerals.Quartz and feldspar develop large and regular pores,resulting in better pore connectivity,whereas clay minerals and calcite with plenty of complex intragranular pores do not.Organic matter negatively influences pore connectivity because the dissolution of calcite by organic acid produced during hydrocarbon generation leads to a more complex and heterogeneous pore structure.This study sheds light on the pore connectivity and controlling factors of the shale oil reservoir and aids in the understanding of shale oil mobility.

A review of nuclear magnetic resonance(NMR) technology applied in the characterization of polymer gels for petroleum reservoir conformance control

Polymer gel systems have been widely applied to control excessive water and improve oil recovery(IOR)in petroleum reservoirs.They are usually divided into two main types,in-situ cross-linked polymer gels,and pre-formed polymer gels.In recent years,nuclear magnetic resonance(NMR) technology has been gradually applied to the research of polymer gel systems due to its unique analysis advantages.This paper is intent to review these works systematically.For in-situ cross-linked polymer gel systems,NMR can be used to characterize the chemical structure changes of the polymer,the cross-linker,and the auxiliary agent in the formulation of the polymer gel systems.Moreover,the gelation time and the gel strength of the in-situ cross-linked polymer gel systems can also be measured by NMR.For pre-formed polymer gels,NMR can be employed to detect the chemical structure of the designed products.Last,the NMR method can evaluate the plugging,water control,and oil improvement performance of the polymer gels in porous media without using dopants.This review can help readers build a more systematic understanding of the application of NMR technology in polymer gel systems for IOR and help re searchers to more deeply study the performance of polymer gel systems.

Nuclear magnetic resonance(NMR) microscopic simulation based on random-walk: Theory and parameters analysis

The microscopic response characteristics of nuclear magnetic resonance(NMR) are widely used for characterizing complex pore structures of rocks. Due to the prohibitive NMR experiment cost, numerical simulation was employed as an alternative approach to verify some theoretical aspects of NMR responses. Firstly, the basic principles of pore-scale NMR simulation based on random-walk method(RWM) were introduced. The RWM-simulated results were benchmarked with the analytical results for an ideal spherical pore model. Then, the effects of two numerical parameters, namely diffusion radius and walk numbers, were studied on the simulation accuracy. The simulation method is then applied to various pore models with different pore sizes and pore shapes filled with different fluids to study the microscopic NMR response characteristics. The numerical experiments are useful for understanding and interpreting NMR measurements and the simulation code provides a numerical tool to perform pixel-based digital rock analysis.

Utilization of nuclear magnetic resonance (NMR) in the determination of water status on rice seeds

The relation between seed viability and waterstatus in seed was studied.The experimentwas carried out at Zhongshan University.Seeds of hybrid rice Shanyou 63 were collectedfrom Guangdong Academy of Agriculture Sci-ences in 1993 and then stored for one year inopen air or with silica gel.Before and afterstorage,the relative content of free water andbound water in seeds were measured with

Crystallochemical Characterizations, Raman Spectroscopy and Studies Nuclear Magnetic Resonance (NMR) of Cu₂Zn(Sn, Si)S₄Compounds for Photovoltaic Applications

In this study, Si-doped Cu2ZnSnS4 compounds (Cu2ZnSn1-xSixS4, 0 ≤ x ≤ 1) were prepared by solid state reaction method for use of materials for photovoltaic cells. The structural and spectroscopic properties of the as-prepared compounds were studied by X-ray diffraction (XRD), 119Sn, 29Si and 65Cu Magic Angle Spinning nuclear magnetic resonance (MAS NMR) and Raman spectroscopy. The Si-substitution in the Sn-site induces three different types of XRD patterns which depend largely on the Si content in the compound. For 0 ≤ x ≤ 0.5, XRD analysis reveals the presence of a pure tetragonal phase of solid solution with I-42m as a space group. Mixed tetragonal and orthorhombic phases were observed for 0.5 < x < 0.8, followed by a pure orthorhombic structure with a space group Pmn21 at high content of Si (x ≥ 0.8). 119Sn MAS NMR spectra show the presence of Sn/Si disorder as a function of the Si content. The 65Cu MAS NMR spectra of the quadratic solid solution confirm the presence of the two copper sites (Cu-2a and Cu-2c) at 780 ppm while in the case of the orthorhombic solid solution samples, a very broad band is observed. The optical properties were investigated of all compounds by UV-Vis diffuse reflectance and the obtained optical band gap values (1.31 to 2.43 eV) confirm a semiconductor character.

基于NMR的非饱和土相对渗透系数快速预测新方法

非饱和土的渗透系数作为研究非饱和土中水分运移的重要参数,直接测量方法原理简明但试样尺寸较大,耗时较长;土-水特征曲线(SWCC)间接预测方法由于需要获取土-水特征曲线,同样较为耗时,工作量较大。为此,结合核磁共振(NMR)理论与渗流理论提出了不同孔径孔隙通道渗透系数与弛豫时间的关系,通过对不同大小孔隙通道渗透系数进行累加,提出了基于核磁共振的饱和/非饱和土渗透系数预测模型和快速预测方法。为验证模型的合理性,以湖南黏土为研究对象,进行了不同初始孔隙比试样脱湿、吸湿过程以及饱和状态下的95次核磁共振试验,获取相应的NMR曲线,采用瞬时剖面法获取不同初始孔隙比试样非饱和相对渗透系数,并与该模型预测值对比。研究发现:利用脱湿、吸湿过程不同含水率下NMR曲线以及饱和状态的NMR曲线均具有较好的预测效果,但基于饱和状态下试样的NMR曲线预测效果相对最好,测量成本和耗时也最小,因此建议采用饱和状态试样NMR曲线直接预测非饱和相对渗透系数。

利用NMR技术测定小麦胚芽中的脂质成分

为深入探究小麦胚芽中的脂质成分,该研究采用不同溶剂分别提取小麦胚芽中的磷脂和中性脂质,利用核磁共振技术(nuclear magnetic resonance,NMR)对小麦胚芽中的脂质成分进行分析,结果表明:^(31)P NMR在小麦胚芽中检测到6种磷脂和相对应的5种溶血性磷脂,以及非脂质含磷化合物甘油磷脂酰胆碱(GPC);磷脂中含量最高的是磷脂酰胆碱(PC),其摩尔浓度为0.42μmol/g,摩尔分数为28.50%,质量浓度为0.31 mg/g,质量分数为30.20%;^(1)H NMR测定小麦胚芽中的多种中性脂质组成及含量,包括甘油三酯(TG)、甘油二酯(DG)、甘油单酯(MG)和游离脂肪酸(FA),其中含量最高的甘油酯是TG,占比为77.25%,含量最低的是2-甘油单酯(2-MG),占比为0.03%;小麦胚芽的甘油三酯和磷脂中检测出亚油酸(L)、油酸(O)和亚麻酸(Ln)等6种不饱和脂肪酸,其中亚油酸的含量最高,在甘油三酯中占比56.26%,在磷脂中占比45.37%。溶血性磷脂和GPC是磷脂的水解产物,DG、MG和FA是甘油三酯的水解产物,这些物质可以反映样品中脂质的水解程度。研究结果表明,利用NMR不仅能够对小麦胚芽脂质的组分进行定性定量分析,而且可以监测小麦胚芽脂质水解程度的变化。NMR技术在小麦胚芽相关产品的脂质分析研究具有重要作用。

Application of nuclear magnetic resonance technology to carbon capture,utilization and storage:A review

Carbon capture,utilization and storage (CCUS) is considered as a very important technology for mitigating global climate change.Carbon dioxide (CO2) injected into an underground reservoir will induce changes in its physical properties and the migration of CO2 will be affected by many factors.Accurately understanding these changes and migration characteristics of CO2 is crucial for selecting a CCUS project site,estimating storage capacity and ensuring storage security.In this paper,the basic principles of nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) technologies are briefly introduced in the context of laboratory experiments related to CCUS.The types of NMR apparatus,experimental samples and testing approaches applied worldwide are discussed and analyzed.Then two typical NMR core analysis systems used in CCUS field and a self-developed high-pressure,low-field NMR rock core flooding experimental system are compared.Finally,a summary of the current deficiencies related to NMR applied to CCUS field is given and future research plans are proposed.

Relaxation study of cement based grouting material using nuclear magnetic resonance

Aiming at actual condition of poor effect of hole sealing for the reason of poor cement paste fluidity in the process of coal mine gas drainage,by adding a water reducing agent,cement paste for hole sealing was produced.The changes of initial distribution,weighted average values and total relaxation signal intensity of transverse relaxation time(T 2) of water in pure cement paste and water reducing agent added cement paste were studied with low field proton nuclear magnetic resonance(NMR).The results show that there are four peaks in T2 distribution curves of cement paste:the first peak is related to the bound water in flocculation,the second and the third peaks are related to the water in flocculation,water reducing agent makes it extending towards the long relaxation time,increasing its liquidity,and the fourth peak is related to the free water.By using weighted average values of T2 and total relaxation signal intensity,hydration process of cement pastes could be roughly divided into four stages:the initial period,reaction period,accelerated period and steady period.By analyzing the periods,it makes sure that the grouting process should be completed in the reaction period in the site,and the drainage process should be started in the steady period.The results have great guiding significance to the hole sealing and methane drainage.

7.0T nuclear magnetic resonance evaluation of the amyloid beta(1–40) animal model of Alzheimer's disease: comparison of cytology verification

3.0T magnetic resonance spectroscopic imaging brain function in Alzheimer＇s disease. However, is a commonly used method in the research ot the role of 7.0T high-field magnetic resonance spectroscopic imaging in brain function of Alzheimer＇s disease remains unclear. In this study, 7.0T magnetic resonance spectroscopy showed that in the hippocampus of Alzheimer＇s disease rats, the N-acetylaspartate wave crest was reduced, and the creatine and choline wave crest was elevated. This finding was further supported by hematoxylin-eosin staining, which showed a loss of hippocampal neurons and more glial cells. Moreover, electron microscopy showed neuronal shrinkage and mitochondrial rupture, and scanning electron microscopy revealed small size hippocampal synaptic vesicles, incomplete synaptic structure, and reduced number. Overall, the results revealed that 7.0T high-field nuclear magnetic resonance spectroscopy detected the lesions and functional changes in hippocampal neurons of Alzheimer＇s disease rats in vivo, allowing the possibility for assessing the success rate and grading of the amyloid beta （1-40） animal model of Alzheimer＇s disease.

Effect of slurry conditioning on flocculant-aided filtration of coal tailings studied by low-field nuclear magnetic resonance and X-ray micro-tomography

The present work aimed to study the effect of slurry conditioning on flocculant-aided filtration of coal tailings by the analysis of filtration kinetics and filter cake structure.Laboratory filtration tests of the coal tailings showed that both the shear rate and agitation time have significant effects on filtration rate and cake moisture.Moderate agitation at the shear rate of 92 s^-1 was favorable for fast filtration,but high cake moisture was encountered.The low-field 1H nuclear magnetic resonance(NMR)measurements of the filter cake showed that the slurry conditioning has a significant effect on the residual water in large pores and a negligible effect on the residual water in small pores.The X-ray micro-tomography(XRM)measurements indicated that the filter cake formed at the shear rate of 92 s^-1 has more macro-pores and higher porosity than that formed at the shear rate of 53 s1,hence more residual water was entrapped in filter cake.The slurry conditioning in the presence of flocculant will change the structure of filter cake and affect the filtration performance.There was a paradox between fast filtration rate and low filter cake moisture.The findings enable better understanding of the effect of slurry conditioning on flocculant-aided filtration of coal tailings.

Urinary nuclear magnetic resonance spectroscopy of a Bangladeshi cohort with hepatitis-B hepatocellular carcinoma: A biomarker corroboration study

AIM: To establish if a distinct urinary metabolic profile could be identified in Bangladeshi hepatitis-B hepatocellular carcinoma(HCC) patients compared to cirrhosis patients and controls. METHODS: Urine samples from 42 Bangladeshi patients with HCC(39 patients with hepatitis-B HCC), 47 with cirrhosis on a background of hepatitis B, 46 with chronic hepatitis B, and seven ethnically-matched healthy controls were analyzed using nuclear magnetic resonance(NMR) spectroscopy. A full dietary and medication history was recorded for each subject. The urinary NMR data were analyzed using principal component analysis(PCA) and orthogonal partial leastsquared discriminant analysis(OPLS-DA) techniques. Differences in relative signal levels of the most discriminatory metabolites identified by PCA and OPLSDA were compared between subject groups using an independent samples Kruskal-Wallis one-way analysis of variance(ANOVA) test with all pairwise multiple comparisons. Within the patient subgroups, the MannWhitney U test was used to compare metabolite levels depending on hepatitis B e-antigen(HBe Ag) status and treatment with anti-viral therapy. A BenjaminiHochberg adjustment was applied to acquire the level of significance for multiple testing, with a declared level of statistical significance of P < 0.05.RESULTS: There were significant differences in age(P < 0.001), weight(P < 0.001), and body mass index(P < 0.001) across the four clinical subgroups. Serum alanine aminotransferase(ALT) was significantly higher in the HCC group compared to controls(P < 0.001); serum α-fetoprotein was generally markedly elevated in HCC compared to controls; and serum creatinine levels were significantly reduced in the HCC group compared to the cirrhosis group(P = 0.004). A threefactor PCA scores plot showed clustering of the urinary NMR spectra from the four subgroups. Metabolites that contributed to the discrimination between the subgroups included acetate, creatine, creatinine, dimethyamine(DMA), formate, glycine, hippurate, and trimethylamine-N-oxide(TMAO). A comparison of relative metabolite levels confirmed that carnitine was significantly increased in HCC; and creatinine, hippurate, and TMAO were significantly reduced in HCC compared to the other subgroups. HBe Ag negative patients showed a significant increase in creatinine(P = 0.001) compared to HBe Ag positive patients in the chronic hepatitis B subgroup, whilst HBe Ag negative patients showed a significant decrease in DMA(P = 0.004) in the cirrhosis subgroup compared to HBe Ag positive patients. There were no differences in metabolite levels in HCC patients who did or did not receive antiviral treatment. CONCLUSION: Urinary NMR changes in Bangladeshi HCC were identified, corroborating previous findings from Egypt and West Africa. These findings could form the basis for the development of a cost-effective HCC dipstick screening test.

Multifractal characteristics of shale and tight sandstone pore structures with nitrogen adsorption and nuclear magnetic resonance

Based on the experiments of nitrogen gas adsorption(N_2 GA) and nuclear magnetic resonance(NMR),the multifractal characteristics of pore structures in shale and tight s andstone from the Chang 7 member of Trias sic Yanchang Formation in Ordos Basin,NW China,are investigated.The multifractal spectra obtained from N2 GA and NMR are analyzed with pore throat structure parameters.The results show that the pore size distributions obtained from N2 GA and NMR are different,and the obtained multifractal characteristics vary from each other.The specific surface and total pore volume obtained by N2 GA experiment have correlations with multifractal characteristics.For the core samples with the similar specific surface,the value of the deviation of multifractal spectra Rd increases with the increase in the proportion of large pores.When the proportion of macropores is small,the Rd value will increase with the increase in specific surface.The multifractal characteristics of pore structures are influenced by specific surface area,average pore size and adsorption volume measured from N2 GA experiment.The multifractal characteristic parameters of tight sandstone measured from NMR spectra are larger than those of shale,which may be caused by the differences in pore size distribution and porosity of shale and tight sandstone.

Porosity and Pore Size Distribution Measurement of Cement/Carbon Nanofiber Composites by ~1H Low Field Nuclear Magnetic Resonance

The dispersion effect of carbon nanofibers （CNFs） in aqueous solution and the mechanical properties, porosity, pore size distribution and microstructure of CNFs reinforced cement-based composites were investigated in this paper. To achieve effective dispersion of CNFs, a method utilizing ultrasonic processing and a commercially surfactant were employed. CNFs were incorporated to cementitious materials with the addition of 0.1 wt% and 0.2 wt% of cement with a water/cement ratio of 0.35. The mechanical properties of CNFs/ cement composites were analyzed, the porosity and pore size distribution were characterized by ^1H low field nuclear magnetic resonance （NMR）, and the microstructure was observed by scanning electron microscopy （SEM）. The results indicate that the optimum concentration ratio of MC to CNFs is 2：1 for dispersing in aqueous solution. Moreover, in the field of mechanical properties, CNFs can improve the flexural strength and compressive strength. The increased mechanical properties and the decreased porosity of the matrices correspond to the increasing CNFs content and CNFs act as bridges and networks across cracks and voids.

Proton nuclear magnetic resonance-based metabonomic models for non-invasive diagnosis of liver fibrosis in chronic hepatitis C:Optimizing the classification of intermediate fibrosis

AIM To develop metabonomic models(MMs), using 1 H nuclear magnetic resonance(NMR) spectra of serum, to predict significant liver fibrosis(SF: Metavir ≥ F2), advanced liver fibrosis(AF: METAVIR ≥ F3) and cirrhosis(C: METAVIR = F4 or clinical cirrhosis) in chronic hepatitis C(CHC) patients. Additionally, to compare the accuracy of the MMs with the aspartate aminotransferase to platelet ratio index(APRI) and fibrosis index based on four factors(FIB-4). METHODS Sixty-nine patients who had undergone biopsy in the previous 12 mo or had clinical cirrhosis were included. The presence of any other liver disease was a criterion for exclusion. The MMs, constructed using partial least squares discriminant analysis and linear discriminant analysis formalisms, were tested by cross-validation, considering SF, AF and C. RESULTS Results showed that forty-two patients(61%) presented SF, 28(40%) AF and 18(26%) C. The MMs showed sensitivity and specificity of 97.6% and 92.6% to predict SF; 96.4% and 95.1% to predict AF; and 100% and 98.0% to predict C. Besides that, the MMs correctly classified all 27(39.7%) and 25(38.8%) patients with intermediate values of APRI and FIB-4, respectively. CONCLUSION The metabonomic strategy performed excellently in predicting significant and advanced liver fibrosis in CHC patients, including those in the gray zone of APRI and FIB-4, which may contribute to reducing the need for these patients to undergo liver biopsy.

Investigation of reinforcement of the modified carbon black from wasted tires by nuclear magnetic resonance

Pyrolysis has the potential of transforming waste into recyclable products. Pyrolytic carbon black (PCB) is one of the most important products from the pyrolysis of used tires. Techniques for surface modifications of PCB have been developed. One of the most significant applications for modified PCB is to reinforce the rubber matrix to obtain high added values. The transverse relaxation and the chain dynamics of vulcanized rubber networks with PCB and modified PCB were studied and compared with those of the commercial carbon blacks using selective 1H transverse relaxation (T2) experiments and dipolar correlation effect (DCE) experiments on the stimulated echo. Demineralization and coupling agent modification not only intensified the interactions between the modified PCB and the neighboring polyisoprene chains, but also increased the chemical cross-link density of the vulcanized rubber with modified PCB. The mechanical testing of the rubbers with different kinds of carbon blacks showed that the maximum strain of the rubber with modified PCB was improved greatly. The mechanical testing results confirmed the conclusion obtained by nuclear magnetic resonance (NMR). PCB modified by the demineralization and NDZ-105 titanate coupling agent could be used to replace the commercial semi-reinforcing carbon black.

Pulsed-field nuclear magnetic resonance:Status and prospects

High-magnetic-field nuclear magnetic resonance(NMR)has manifested itself as an indispensable tool in modern scientific research in the fields of physics,chemistry,materials science,biology,and medicine,among others,owing to its great advantages in both measurement sensitivity and quantum controllability.At present,the use of pulsed fields is the only controllable and nondestructive way to generate high magnetic fields of up to 100 T.NMRcombined with pulsed fields is therefore considered to have immense potential for application in multiple scientific and technical disciplines.Irrespective of the paramount technical challenges,including short duration of the pulsed fields,unstable plateaus,and poor field homogeneity and reproducibility,great progress has been made in a number of pulsed-field laboratories in Germany,France,and Japan.In this paper,we briefly review the status of the pulsed-field NMR technique,as well as its applications in multiple disciplines.We also discuss future trends with regard to the upgrading of pulsed-field NMR.

Microstructure evolution of loess under multiple collapsibility based on nuclear magnetic resonance and scanning electron microscopy

In recent years, the acceleration of urbanization in loess areas has prompted frequent dismantling and reconstruction of old urban areas. Demolition and reconstruction of buildings involve multiple collapses of the foundation. To study microstructure evolution of loess under multiple collapsibility, this paper selects undisturbed loess samples from Guyuan, Northwest China for multiple compression tests. Using nuclear magnetic resonance(NMR) imaging and scanning electron microscopy(SEM) as auxiliary methods, a combination of qualitative and quantitative analyses was used to study the microstructure of loess samples before and after various number of collapses under different pressures. Results show that the loess does undergo multiple collapse under 200 kPa pressure. Pore is an important reason for loess collapse. The initial collapse comes primarily from the compression of macropores and mesopores, and the second collapse comes primarily from mesopore compression. The compression process of loess can be roughly divided into two stages. First, under the action of dissolution and compression, the relative displacement of soil particles occurs. Macropores and mesopores are destroyed first, generating small pores. Second, with increasing pressure and times of collapses, pore compression gradually transforms into small pore compression. During the first collapse, particle aggregates disintegrate due to water and pressure. However, with increasing times of collapses, the contact relationship between particles gradually changes from the point contact to face contact. Loess particles tend to gradually become rounded. The study of the microstructure provides the possibility to further reveal the mechanism of multiple collapsibility of loess.

Review of nuclear magnetic resonance studies on iron-based superconductors

The newly discovered iron-based superconductors have triggered renewed enormous research interest in the condensed matter physics community. Nuclear magnetic resonance （NMR） is a low-energy local probe for studying strongly correlated electrons, and particularly important for high-Tc superconductors. In this paper, we review NMR studies on the structural transition, antiferromagnetic order, spin fluctuations, and superconducting properties of several iron-based high-Tc superconductors, including LaFeAsOl_xFx, LaFeAsOl_x, BaFe2As2, Bal_xKxFe2As2, Cao.23Nao.67Fe2As2, BaFe2（Asl_xPx）2, Ba（Fel_xRux）2As2, Ba（Fel_xCox）2As2, Lil＋xFeAs, LiFel_xCoxAs, NaFeAs, NaFel_xCoxAs, KyFe2_xSe2, and （T1,Rb）yFe2_xSe2.

Evolution of distribution and content of water in cement paste by low field nuclear magnetic resonance

The low field nuclear magnetic resonance (NMR), as a nondestructive and noninvasive technique, was employed to investigate the water distribution and content in cement paste with different water-to-cement ratio (w/c ratio) during early and later hydration stages. From the water distribution spectrum deduced from relaxation time distribution in paste, it is suggested that the water fills in the capillary pores at initial period, and then diffuses to the mesopores and gel pores in hydration products with the hydration proceeding. The decrease of peak area in water distribution spectrum reflects the transformation from physically bound water to chemically bound water. In addition, based on the connection between relaxation time and pore size, the relative content changes of water in various states and constrained in different types of pores were also measured. The results demonstrate that it is influenced by the formation of pore system and the original water-to-cement ratio in the paste. Consequently, the relative content of capillary water is dropped to less than 2% in the paste with low w/c ratio of 0.3 when being hydrated for 1 d, while the contents are still 16% and 36% in the pastes with w/c ratios of 0.4 and 0.5, respectively.