A nuclear power plant real-time engineering simulator was developed based on general-purpose ther- mal-hydraulic system simulation code RELAP5. It mainly consists of three parts:improved thermal-hydraulic system simul...A nuclear power plant real-time engineering simulator was developed based on general-purpose ther- mal-hydraulic system simulation code RELAP5. It mainly consists of three parts:improved thermal-hydraulic system simulation code RELAP5,control and protection system and human-machine interface. A normal transient of CHASHMA nuclear power plant turbine step load change from 100% to 90% of full power,was simulated by the en- gineering simulator as an application example. This paper presents structure and main features of the engineering simulator,and application results are shown and discussed.展开更多
Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-st...Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.展开更多
The performances of turbine blades have a significant impact on the energy conversion efficiency of vertical solar power plants.In the present study,such a relationship is assessed by considering two kinds of airfoil ...The performances of turbine blades have a significant impact on the energy conversion efficiency of vertical solar power plants.In the present study,such a relationship is assessed by considering two kinds of airfoil blades,designed by using the Wilson theory.In particular,numerical simulations are conducted using the SST K−ω model and assuming a wind speed of 3–6 m/s and seven or eight blades.The two airfoils are the NACA63121(with a larger chord length)and the AMES63212;It is shown that the torsion angle of the former is smaller,and its wind drag ratio is larger;furthermore,the resistance is increased by about 66.3%on average.Within the scope of the study,the results show that the NACA63212 airfoil is better than the AMES63212 airfoil in terms of power,with an average improvement of about 2.8%.The simulation results have a certain guiding significance for selecting turbine blade airfoils and improving turbine efficiency.展开更多
This Paper concerns with the numerical modelling of flow field in a tidal river and in the vicinity of intake of a nuclear power plant. The hybrid method of fractional steps presented in [1] was adopted in this modell...This Paper concerns with the numerical modelling of flow field in a tidal river and in the vicinity of intake of a nuclear power plant. The hybrid method of fractional steps presented in [1] was adopted in this modelling. In order to simulate the local flow field nearby the water intake meticulously, the technique of the match of the coarse and fine grids was used. The numerical results are in good agreement with the in-situ measurements of the main current. The detailed data of local flow field nearby the intake provides the assessment of the sediment transport characteristics in the vicinity of intake of the nuclear power plant.展开更多
The study of the reliability of operator’s diagnosis and decision-making during abnormal events with HCR model has been introduced. A new approach has been proposed by the authors to deal with the classification of H...The study of the reliability of operator’s diagnosis and decision-making during abnormal events with HCR model has been introduced. A new approach has been proposed by the authors to deal with the classification of HIs. The modification of T0.5 by PSFs coefficients has been discussed. In addition, it is emphasized that T0. 5 and SD(σ) of response times can be used as a scale to predict and evaluate the reliability of crew/operator behavior. These processings provide improvement and refinement to HCR model and its practical application. The experiment for operator response time of Chinese NPP using a lull-scale simulator has proved the above-mentioned processings and presented the quantitative results of operator reliability in Chinese NPP.展开更多
采用土-结相互作用分区分析方法(partitioned analysis of soil-structure interaction,PASSI),对软土地基核岛厂房振动台试验中的筏基-混凝土框架模型以及桩基-混凝土框架模型进行了数值模拟,对比分析了振动台试验结果与数值模拟结果,...采用土-结相互作用分区分析方法(partitioned analysis of soil-structure interaction,PASSI),对软土地基核岛厂房振动台试验中的筏基-混凝土框架模型以及桩基-混凝土框架模型进行了数值模拟,对比分析了振动台试验结果与数值模拟结果,并对软土地基下核岛厂房土-基础-结构的地震响应特征进行了分析。对2种模型输入调幅为0.05、0.10、0.20 g的RG160、Chi-Chi与Landers地震波,对比分析了各工况下振动台试验与数值模拟的土体与结构加速度放大系数、楼层反应谱、筏基底部土压力时程、桩身应变以及桩身弯矩。结果表明:数值模拟结果能较好地反映振动台试验结果;经过土层放大作用,随着楼层的增高,振动台试验和数值模拟中的加速度放大系数随之增大,反映了同样的规律;振动台试验与数值模拟所得的土-结体系的反应谱均与输入地震动频谱特征及体系的振动特性相关;振动台试验中,筏板基础会出现倾覆现象,筏基底部土压力时程表现出“东高西低”的现象,但数值模拟中筏基底部的土压力时程未出现此种现象,其原因是数值模拟中未考虑土体与基础的接触非线性;数值模拟中群桩的地震响应与试验的宏观现象基本吻合,定量上有差异,是数值模拟中未考虑桩的非线性所致。展开更多
文摘A nuclear power plant real-time engineering simulator was developed based on general-purpose ther- mal-hydraulic system simulation code RELAP5. It mainly consists of three parts:improved thermal-hydraulic system simulation code RELAP5,control and protection system and human-machine interface. A normal transient of CHASHMA nuclear power plant turbine step load change from 100% to 90% of full power,was simulated by the en- gineering simulator as an application example. This paper presents structure and main features of the engineering simulator,and application results are shown and discussed.
文摘Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.
文摘The performances of turbine blades have a significant impact on the energy conversion efficiency of vertical solar power plants.In the present study,such a relationship is assessed by considering two kinds of airfoil blades,designed by using the Wilson theory.In particular,numerical simulations are conducted using the SST K−ω model and assuming a wind speed of 3–6 m/s and seven or eight blades.The two airfoils are the NACA63121(with a larger chord length)and the AMES63212;It is shown that the torsion angle of the former is smaller,and its wind drag ratio is larger;furthermore,the resistance is increased by about 66.3%on average.Within the scope of the study,the results show that the NACA63212 airfoil is better than the AMES63212 airfoil in terms of power,with an average improvement of about 2.8%.The simulation results have a certain guiding significance for selecting turbine blade airfoils and improving turbine efficiency.
文摘This Paper concerns with the numerical modelling of flow field in a tidal river and in the vicinity of intake of a nuclear power plant. The hybrid method of fractional steps presented in [1] was adopted in this modelling. In order to simulate the local flow field nearby the water intake meticulously, the technique of the match of the coarse and fine grids was used. The numerical results are in good agreement with the in-situ measurements of the main current. The detailed data of local flow field nearby the intake provides the assessment of the sediment transport characteristics in the vicinity of intake of the nuclear power plant.
文摘The study of the reliability of operator’s diagnosis and decision-making during abnormal events with HCR model has been introduced. A new approach has been proposed by the authors to deal with the classification of HIs. The modification of T0.5 by PSFs coefficients has been discussed. In addition, it is emphasized that T0. 5 and SD(σ) of response times can be used as a scale to predict and evaluate the reliability of crew/operator behavior. These processings provide improvement and refinement to HCR model and its practical application. The experiment for operator response time of Chinese NPP using a lull-scale simulator has proved the above-mentioned processings and presented the quantitative results of operator reliability in Chinese NPP.
