Purpose: To evaluate the performance of a phacoemulsification system in terms of effective (EPT) and total phaco time (TPT) using 20G and 21G phaco tips. Methods: Retrospective comparative study including 143 consecut...Purpose: To evaluate the performance of a phacoemulsification system in terms of effective (EPT) and total phaco time (TPT) using 20G and 21G phaco tips. Methods: Retrospective comparative study including 143 consecutive cataractous eyes undergoing phacoemulsification cataract surgery with the Visalis 500 device. The 20G and 21G phaco tips were used in 46 and 97 eyes, respectively. The EPT and TPT values were evaluated. Results: Median TPT was 11.25 s and 17.50 s in the 20G and 21G groups, respectively (p = 0.0011). Median EPT values were 3.15 s and 5.00 s in the 20G and 21G groups, respectively (p = 0.0032). TPT and EPT were significantly lower in 3/3+ cataract eyes compared to 4/4+ using both tips (p < 0.001). Conclusions: The Visalis 500 allows cataract surgery with reduced TPT and EPT, even in hard cataracts. The use of the 20G phaco tip provides an additional benefit in terms of reduction of phaco time.展开更多
The grain size of prior austenite has a distinct influence on the microstructure and final mechanical properties of steels. Thus, it is significant to clearly reveal the grain boundaries and therefore to precisely cha...The grain size of prior austenite has a distinct influence on the microstructure and final mechanical properties of steels. Thus, it is significant to clearly reveal the grain boundaries and therefore to precisely characterize the grain size of prior austenite. For NiCrMoV rotor steels quenched and tempered at high temperature, it is really difficult to display the grain boundaries of prior austenite clearly, which limits a further study on the correlation between the properties and the corresponding microstructure. In this paper, an effective etchant was put forward and further optimized. Experimental results indicated that this agent was effective to show the details of grain boundaries, which help analyze fatigue crack details along the propagation path. The optimized corrosion agent is successful to observe the microstructure characteristics and expected to help analyze the effect of microstructure for a further study on the mechanical properties of NiCrMoV rotor steels used in the field of nuclear power.展开更多
Based on 10 shale samples collected from 4 wells in Qinshui Basin,we investigate the full-sized pore structure and fractal characteristics of Marine-Continental transitional shale by performing organic geochemistry,mi...Based on 10 shale samples collected from 4 wells in Qinshui Basin,we investigate the full-sized pore structure and fractal characteristics of Marine-Continental transitional shale by performing organic geochemistry,mineralogical composition,Nitrogen gas adsorption(N2 adsorption)and Nuclear Magnetic Resonance(NMR)measurements and fractal analysis.Results show that the TOC content of the shale samples is relatively high,with an average value of 2.44wt%,and the thermal evolution is during the mature-over mature stage.The NMR T2 spectrum can be used to characterize the fullsized pore structure characteristics of shale.By combining N2 adsorption pore structure parameters and NMR T2 spectrums,the surface relaxivity of samples are calculated to be between 1.7877 um/s and 5.2272 um/s.On this basis,the T2 spectrums are converted to full-sized pore volume and surface area distribution curves.The statistics show that the pore volume is mainly provided by mesopore,followed by micropore,and the average percentages are 65.04%and 30.83%respectively;the surface area is mainly provided by micropore,followed by mesopore,and the average percentages are 60.8004%and 39.137%respectively;macropore contributes little to pore volume and surface area.The pore structure characteristics of shale have no relationship with TOC,but strong relationships with clay minerals content.NMR fractal dimensions Dmicro and Dmeso have strong positive relationships with the N2 adsorption fractal dimensions D1 and D2 respectively,indicating that Dmicro can be used to characterize the fractal characteristics of pore surface,and Dmeso can be used to characterize the fractal characteristics of pore structure.The shale surface relaxivity is controlled by multiple factors.The increasing of clay mineral content,pore surface area,pore surface fractal dimension and the decreasing of average pore size,will all lead to the decreasing of shale surface relaxivity.展开更多
In this study, finite element analysis （FEA） has been used to investigate the effects of different Laval nozzle throat sizes on supersonic molecular beam. The simulations indicate the Mach numbers of the molecular s...In this study, finite element analysis （FEA） has been used to investigate the effects of different Laval nozzle throat sizes on supersonic molecular beam. The simulations indicate the Mach numbers of the molecular stream peak at different positions along the center axis of the beam, which correspond to local minimums of the molecular densities. With the increase of the throat diameter, the first peak of the Mach number increases first and then decreases, while that of the molecular number density increases gradually. Moreover, both first peaks shift progressively away from the throat. At the last part, we discuss the possible applications of our FEA approach to solve some crucial problems met in modern transportations.展开更多
为了实现致密岩心的孔隙量化表征,采用核磁共振(nuclear magnetic resonance,NMR)技术,利用T2弛豫时间和孔隙半径(r)的正比关系可测致密岩心的孔隙度、渗透率和孔径分布,利用核磁共振T2截止值可区分孔隙中的自由流体和束缚流体。从核磁...为了实现致密岩心的孔隙量化表征,采用核磁共振(nuclear magnetic resonance,NMR)技术,利用T2弛豫时间和孔隙半径(r)的正比关系可测致密岩心的孔隙度、渗透率和孔径分布,利用核磁共振T2截止值可区分孔隙中的自由流体和束缚流体。从核磁共振表征岩心孔隙的原理出发,分析了核磁共振T2谱与岩心孔隙度、渗透率、孔径分布、孔隙内可动流体的关系。根据上述原理,通过实例验证了核磁共振技术在致密岩心孔隙度和渗透率量化表征中的准确性和适用性。实验岩心的T2截止值和孔径分布测试表明:1号岩心T2截止值为21.85 ms,2号岩心的T2截止值为40.11 ms;1号岩心小孔隙分量大,2号岩心孔隙分布较均匀。截止值的计算结果表明地区经验法得出的T2截止值不完全适用于该区域的致密岩心,有必要建立区域性的截止值变化范围图版。展开更多
文摘Purpose: To evaluate the performance of a phacoemulsification system in terms of effective (EPT) and total phaco time (TPT) using 20G and 21G phaco tips. Methods: Retrospective comparative study including 143 consecutive cataractous eyes undergoing phacoemulsification cataract surgery with the Visalis 500 device. The 20G and 21G phaco tips were used in 46 and 97 eyes, respectively. The EPT and TPT values were evaluated. Results: Median TPT was 11.25 s and 17.50 s in the 20G and 21G groups, respectively (p = 0.0011). Median EPT values were 3.15 s and 5.00 s in the 20G and 21G groups, respectively (p = 0.0032). TPT and EPT were significantly lower in 3/3+ cataract eyes compared to 4/4+ using both tips (p < 0.001). Conclusions: The Visalis 500 allows cataract surgery with reduced TPT and EPT, even in hard cataracts. The use of the 20G phaco tip provides an additional benefit in terms of reduction of phaco time.
文摘The grain size of prior austenite has a distinct influence on the microstructure and final mechanical properties of steels. Thus, it is significant to clearly reveal the grain boundaries and therefore to precisely characterize the grain size of prior austenite. For NiCrMoV rotor steels quenched and tempered at high temperature, it is really difficult to display the grain boundaries of prior austenite clearly, which limits a further study on the correlation between the properties and the corresponding microstructure. In this paper, an effective etchant was put forward and further optimized. Experimental results indicated that this agent was effective to show the details of grain boundaries, which help analyze fatigue crack details along the propagation path. The optimized corrosion agent is successful to observe the microstructure characteristics and expected to help analyze the effect of microstructure for a further study on the mechanical properties of NiCrMoV rotor steels used in the field of nuclear power.
基金support from the National Science and Technology Major Project of China (Grant No. 2016ZX05034)
文摘Based on 10 shale samples collected from 4 wells in Qinshui Basin,we investigate the full-sized pore structure and fractal characteristics of Marine-Continental transitional shale by performing organic geochemistry,mineralogical composition,Nitrogen gas adsorption(N2 adsorption)and Nuclear Magnetic Resonance(NMR)measurements and fractal analysis.Results show that the TOC content of the shale samples is relatively high,with an average value of 2.44wt%,and the thermal evolution is during the mature-over mature stage.The NMR T2 spectrum can be used to characterize the fullsized pore structure characteristics of shale.By combining N2 adsorption pore structure parameters and NMR T2 spectrums,the surface relaxivity of samples are calculated to be between 1.7877 um/s and 5.2272 um/s.On this basis,the T2 spectrums are converted to full-sized pore volume and surface area distribution curves.The statistics show that the pore volume is mainly provided by mesopore,followed by micropore,and the average percentages are 65.04%and 30.83%respectively;the surface area is mainly provided by micropore,followed by mesopore,and the average percentages are 60.8004%and 39.137%respectively;macropore contributes little to pore volume and surface area.The pore structure characteristics of shale have no relationship with TOC,but strong relationships with clay minerals content.NMR fractal dimensions Dmicro and Dmeso have strong positive relationships with the N2 adsorption fractal dimensions D1 and D2 respectively,indicating that Dmicro can be used to characterize the fractal characteristics of pore surface,and Dmeso can be used to characterize the fractal characteristics of pore structure.The shale surface relaxivity is controlled by multiple factors.The increasing of clay mineral content,pore surface area,pore surface fractal dimension and the decreasing of average pore size,will all lead to the decreasing of shale surface relaxivity.
基金financially supported by the Science Foundation for International Cooperation of Sichuan Province (2014HH0016)the Fundamental Research Funds for the Central Universities (SWJTU2014: A0920502051113-10000)National Magnetic Confinement Fusion Science Program (2011GB112001)
文摘In this study, finite element analysis （FEA） has been used to investigate the effects of different Laval nozzle throat sizes on supersonic molecular beam. The simulations indicate the Mach numbers of the molecular stream peak at different positions along the center axis of the beam, which correspond to local minimums of the molecular densities. With the increase of the throat diameter, the first peak of the Mach number increases first and then decreases, while that of the molecular number density increases gradually. Moreover, both first peaks shift progressively away from the throat. At the last part, we discuss the possible applications of our FEA approach to solve some crucial problems met in modern transportations.
文摘为了实现致密岩心的孔隙量化表征,采用核磁共振(nuclear magnetic resonance,NMR)技术,利用T2弛豫时间和孔隙半径(r)的正比关系可测致密岩心的孔隙度、渗透率和孔径分布,利用核磁共振T2截止值可区分孔隙中的自由流体和束缚流体。从核磁共振表征岩心孔隙的原理出发,分析了核磁共振T2谱与岩心孔隙度、渗透率、孔径分布、孔隙内可动流体的关系。根据上述原理,通过实例验证了核磁共振技术在致密岩心孔隙度和渗透率量化表征中的准确性和适用性。实验岩心的T2截止值和孔径分布测试表明:1号岩心T2截止值为21.85 ms,2号岩心的T2截止值为40.11 ms;1号岩心小孔隙分量大,2号岩心孔隙分布较均匀。截止值的计算结果表明地区经验法得出的T2截止值不完全适用于该区域的致密岩心,有必要建立区域性的截止值变化范围图版。
