Method of triangular mesh modeling in numerical control machining simulation

In the process of numerical control machining simulation,the workpiece surface is usually described with the uniform triangular mesh model.To alleviate the contradiction between the simulation speed and accuracy in this model,two improved methods,i.e.,the local refinement triangular mesh modeling method and the adaptive triangular mesh modeling method were presented.The simulation results show that when the final shape of the workpiece is known and its mathematic representation is simple,the local refinement triangular mesh modeling method is preferred;when the final shape of the workpiece is unknown and its mathematic description is complicated,the adaptive triangular mesh modeling method is more suitable.The experimental results show that both methods are more targeted and practical and can meet the requirements of real-time and precision in simulation.

METHOD FOR SUPPRESSING CUTTING CHATTER IN NUMERICAL CONTROL MACHINE TOOLS

A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control （NC） machine tool and controlling the limited cutting width. A model of the cutting system of the NC machine tool is established. It includes the mechanical system, the servo system and the cutting chatter system. Interactions between every two systems are shown in the model. The cutting system stability is simulated and relation curves between the limited cutting width and servo system parameters are described in the experiment. Simulation and experimental results show that there is a mapping relation between the limited cutting width and servo parameters of the NC machine tool, and the method is applicable and credible to suppress chatter.

Bayesian networks modeling for thermal error of numerical control machine tools

The interaction between the heat source location, its intensity, thermal expansion coefficient, the machine system configuration and the running environment creates complex thermal behavior of a machine tool, and also makes thermal error prediction difficult. To address this issue, a novel prediction method for machine tool thermal error based on Bayesian networks (BNs) was presented. The method described causal relationships of factors inducing thermal deformation by graph theory and estimated the thermal error by Bayesian statistical techniques. Due to the effective combination of domain knowledge and sampled data, the BN method could adapt to the change of running state of machine, and obtain satisfactory prediction accuracy. Ex- periments on spindle thermal deformation were conducted to evaluate the modeling performance. Experimental results indicate that the BN method performs far better than the least squares (LS) analysis in terms of modeling estimation accuracy.

Bayesian zero-failure reliability modeling and assessment method for multiple numerical control(NC) machine tools

A new problem that classical statistical methods are incapable of solving is reliability modeling and assessment when multiple numerical control machine tools(NCMTs) reveal zero failures after a reliability test. Thus, the zero-failure data form and corresponding Bayesian model are developed to solve the zero-failure problem of NCMTs, for which no previous suitable statistical model has been developed. An expert-judgment process that incorporates prior information is presented to solve the difficulty in obtaining reliable prior distributions of Weibull parameters. The equations for the posterior distribution of the parameter vector and the Markov chain Monte Carlo(MCMC) algorithm are derived to solve the difficulty of calculating high-dimensional integration and to obtain parameter estimators. The proposed method is applied to a real case; a corresponding programming code and trick are developed to implement an MCMC simulation in Win BUGS, and a mean time between failures(MTBF) of 1057.9 h is obtained. Given its ability to combine expert judgment, prior information, and data, the proposed reliability modeling and assessment method under the zero failure of NCMTs is validated.

Carbon Emission Modeling and Analysis in Manufacturing Process for Numerical Control Machine Tools

Reducing carbon emissions( CEs) is the urgent demand all over the world. In order to realize the low-carbon numerical control( NC) machining, the evaluation model of a part's manufacturing carbon emission with NC machine tools was built by considering the influences of the cutting tool geometrical parameters.The manufacturing CEs were produced by electric power,cutting tools,and cutting fluid consumed in manufacturing process. The parameters of cutting tools affected not only the CEs,but also the machining quality. Then the actual constraint models of the machine performance,machining quality were given in order to optimize the cutting parameters and achieve the low-CEs. Finally,a case was given to analyze the influences of the cutting tool angles on the manufacturing CEs. The results show that the CEs decrease as the rake angle and edge angle increase under the constraints of the machine specifications and machining quality.

Specialized Numerical Control Plasma Cutting Machine

The large thermal cutting equipment——The DHG. CNC numerical control plasma cutting machine is produced by The Ha’erbin Welding & Cutting Equipment Co. It specializes in the precise formation and baiting of nonferrous boards and thin carbon steel plates at a high speed. It avoids the disadvantage of flame cutting, which cannot cut nonferrous and thin steel plates.

An Investigation into the Life Cycle Cost of a Typical Computer Numerical Control Machine

This paper relates to a typical computer numerical control (CNC) machine, model FDXNC 128, and analyzes the payoff period quantitatively and forecasts the future maintenance cost and the evaluation of the economic benefit by using Life Cycle Cost (LCC) method and grey theory. The discussion shows conclusions that are beneficial to the production, management, and decision making of the enterprise.

INTERNET-BASED MACHINING PARAMETER OPTIMIZATION AND MANAGEMENT SYSTEM FOR HIGH-SPEED MACHINING

The theory and its method of machining parameter optimization for high-speed machining are studied. The machining data collected from workshops, labs and references are analyzed. An optimization method based on the genetic algorithm (GA) is investigated. Its calculation speed is faster than that of traditional optimization methods, and it is suitable for the machining parameter optimization in the automatic manufacturing system. Based on the theoretical studies, a system of machining parameter management and optimization is developed. The system can improve productivity of the high-speed machining centers.

Development of PLC-based Tension Control System

Fiber winding tension is an important factor in the molding techniques of composite material which influences the quality of winding product directly, and the tension control is a key technique in fiber winding techniques. This paper introduces a closed-loop tension control system with the programmable logic controller （PLC） with function modules as its control kernel, the alternating current （AC） servo motor as execute element and the radius-following device to accomplish the real-time radius compensation. The mechanism of the tension control system is analyzed and the numerical model is set up. The compensation technique of the radius of the scroll is analyzed. Experimental results show that the system is well qualified with high control precision and high reaction speed.

CPS Modeling of CNC Machine Tool Work Processes Using an Instruction-Domain Based Approach

Building cyber-physical system(CPS) models of machine tools is a key technology for intelligent manufacturing. The massive electronic data from a computer numerical control(CNC) system during the work processes of a CNC machine tool is the main source of the big data on which a CPS model is established. In this work-process model, a method based on instruction domain is applied to analyze the electronic big data, and a quantitative description of the numerical control(NC) processes is built according to the G code of the processes. Utilizing the instruction domain, a work-process CPS model is established on the basis of the accurate, real-time mapping of the manufacturing tasks, resources, and status of the CNC machine tool. Using such models, case studies are conducted on intelligent-machining applications, such as the optimization of NC processing parameters and the health assurance of CNC machine tools.

Reliability Analysis of Electrical System of Computer Numerical Control Machine Tool Based on Bayesian Networks

The core of computer numerical control(CNC) machine tool is the electrical system which controls and coordinates every part of CNC machine tool to complete processing tasks, so it is of great significance to strengthen the reliability of the electrical system. However, the electrical system is very complex due to many uncertain factors and dynamic stochastic characteristics when failure occurs. Therefore, the traditional fault tree analysis(FTA) method is not applicable. Bayesian network(BN) not only has a unique advantage to analyze nodes with multiply states in reliability analysis for complex systems, but also can solve the state explosion problem properly caused by Markov model when dealing with dynamic fault tree(DFT). In addition, the forward causal reasoning of BN can get the conditional probability distribution of the system under considering the uncertainty;the backward diagnosis reasoning of BN can recognize the weak links in system, so it is valuable for improving the system reliability.

The Innovation of CNC Machine Interface Based on DNC System

This paper describes the innovation schemes of the interface of a CNC machine which cannot communicate with a computer by a Direct Numerical Control(DNC)interface and the functions of a DNC interface system.One architecture of hardware and software of a practi- cal single-chip computer based on DNC interface system developed by the authors is given. Without any change of the original hardware and software,this DNC interface system has been used to innovate the CNC machine's interface to implement the direct communication between a computer and a CNC machine and to achieve no tape transmission of a part program and ma- chine parameters.It has been demonstrated that this DNC interface system has certain practical values in improving the reliability,efficiency and production management of CNC/NC machine.

Theoretical analysis and verification of uncertainty of measurement on a cantilever coordinate measuring machine

A cantilever coordinate measuring machine(CCMM)is proposed according to the in-situ measurement requirement of workpieces with complex structures limited by the finite space of the5-axes computerized numerical control(CNC)processing site.Factors affecting uncertainty of measurement(UM)are classified and analyzed on the basis of uncertainty evaluation criteria,and the estimation technique of UM for measuring systems is presented.UM of the CCMM is estimated from the factors such as temperature,error motions as well as the mechanism deformations.Measurement results show that the actual measurement error is smaller than that of measurement requirement.

Studies of layout of world machine tools industry based on patent analysis

As the foundation of an industrialized country nowadays,machine tools industry is regarded as the engine of industrial development of a country.The developed countries,such as USA,Germany and Japan,have widely deployed the technology of using the patent in order to keep their strength in various fields.This research examins the CNC machine tools industry in the world by using the patent analysis method.It first gives an overview about the world patent application in CNC machine tools industry from 1963 to 2010 and divides the development of the industry into five stages.It also lists the patent application of the world top 20 countries,where the top 5 countries are compared.The patents of the world top 10 companies of machine tools manufacturers are mapped according to the international patent classification(IPC),and the future trends of world machine tools industry are discussed.Finally conclusions and suggestions are presented.

Design and Fabrication of a Three Dimensional Commemorative Artistic Plaque

In this paper, design and fabrication of a commemorative plaque are described and presented. The plaque was fabricated to honour the memory of the 14 women massacred at L＇Ecole Polytechnique in Montreal. This plaque is the result of a project partnership between the Faculties of Engineering and Fine Arts, and was sponsored by the Office of the Vice-President Academic and Provost. An art design was selected through a contest coordinated by the Visual Arts Departmment. The selected art design was then turned over to the Mechanical Engineering Department to be converted to a 3-dimensional （3D） solid model and then eventually fabricated on a computer numerical control （CNC） milling machine. The fabricated plaque was unveiled during the December 2010 Memorial event at UVic.

Investigation of Cutting Force by End Milling Operation

In this work, the cutting forces by end milling operation are analyzed. Therefore, the main parameters of cutting force as cutting speed, feed rate and depth of cut also are investigated in our case. The cutting force is modelled and analyzed into mathematical Wolfram simulations in order to compare the results and in the same time achieve the best solutions. Theoretical results are carried out by using the regression method that required fulfilling the critter by Fisher. The number of experiment, measurements and results of cutting force are presented in 2D as well as 3D. In order to verify the accuracy of the 2D diagram, the results for our case is used both two way such as experimental and theoretical method as well as results are compared. In other hands, these results indicate directly that the optimized parameters are capable of machining the workpiece. The obtained measurement results are compared with theoretical methods in Wolfram software.

Improved time-optimal B-spline feedrate scheduling for NURBS tool paths in CNC machining

Feedrate scheduling in computer numerical control(CNC)machining is of great importance to fully develop the capabilities of machine tools while maintaining the motion stability of each actuator.Smooth and time-optimal feedrate scheduling plays a critical role in improving the machining efficiency and precision of complex surfaces considering the irregular curvature characteristics of tool paths and the limited drive capacities of machine tools.This study develops a general feedrate scheduling method for non-uniform rational B-splines(NURBS)tool paths in CNC machining aiming at minimizing the total machining time without sacrificing the smoothness of feed motion.The feedrate profile is represented by a B-spline curve to flexibly adapt to the frequent acceleration and deceleration requirements of machining along complex tool paths.The time-optimal B-spline feedrate is produced by continuously increasing the control points sequentially from zero positions in the bidirectional scanning and sampling processes.The required number of knots for the time-optimal B-spline feedrate can be determined using a progressive knot insertion method.To improve the computational efficiency,the B-spline feedrate profile is divided into a series of independent segments and the computation in each segment can be performed concurrently.The proposed feedrate scheduling method is capable of dealing with not only the geometry constraints but also high-order drive constraints for any complex tool path with little computational overhead.Simulations and machining experiments are conducted to verify the effectiveness and superiorities of the proposed method.

STUDY ON THE FEEDFORWARD COMPENSATION OF THE MOTIONERRORS OF NC MACHINE TOOLS

A feedforward compensation naethod of the motion errors of NC machine tools imple- mented with software is proposed , with which the motion errors can be compensated whithout changing the original computer control systems of the NC machine tools. The experimental results show that the circular interpolation profile machining errors decrease by a factor of 2/3 after com- pensated.

STEP-NC Based High-level Machining Simulations Integrated with CAD/CAPP/CAM

With the development of manufacturing,numerical control(NC) machining simulation has become a modern tool to obtain safe and reliable machining operations.Although some research and commercial software about NC machining simulations is available,most of them is oriented for G&M code.It is a low-level data model for computer numerical control(CNC),which has inherent drawbacks such as incomplete data and lack of accuracy.These limitations hinder the development of a real simulation system.Whereas,standard for the exchange of product data-compliant numerical control(STEP-NC) is a new and high-level data model for CNC.It provides rich information for CNC machine tools,which creates the condition for an informative and real simulation.Therefore,this paper proposes STEP-NC based high-level NC machining simulations solution integrated with computer-aided design/computeraided process planning/computer-aided manufacturing(CAD/CAPP/CAM).It turned out that the research provides a better informed simulation environment and promotes the development of modern manufacturing.

Thermal error modeling based on BiLSTM deep learning for CNC machine tool

The machining accuracy of computer numerical control machine tools has always been a focus of the manufacturing industry.Among all errors,thermal error affects the machining accuracy considerably.Because of the significant impact of Industry 4.0 on machine tools,existing thermal error modeling methods have encountered unprecedented challenges in terms of model complexity and capability of dealing with a large number of time series data.A thermal error modeling method is proposed based on bidirectional long short-term memory(BiLSTM)deep learning,which has good learning ability and a strong capability to handle a large group of dynamic data.A four-layer model framework that includes BiLSTM,a feedforward neural network,and the max pooling is constructed.An elaborately designed algorithm is proposed for better and faster model training.The window length of the input sequence is selected based on the phase space reconstruction of the time series.The model prediction accuracy and model robustness were verified experimentally by three validation tests in which thermal errors predicted by the proposed model were compensated for real workpiece cutting.The average depth variation of the workpiece was reduced from approximately 50μm to less than 2μm after compensation.The reduction in maximum depth variation was more than 85%.The proposed model was proved to be feasible and effective for improving machining accuracy significantly.