Low-Power Operational Amplifier for Real-Time Signal Processing System of Micro Air Vehicle

A low-power complementary metal oxide semiconductor（CMOS） operational amplifier （op-amp） for real-time signal processing of micro air vehicle （MAV） is designed in this paper.Traditional folded cascode architecture with positive channel metal oxide semiconductor（PMOS） differential input transistors and sub-threshold technology are applied under the low supply voltage.Simulation results show that this amplifier has significantly low power,while maintaining almost the same gain,bandwidth and other key performances.The power required is only 0.12 mW,which is applicable to low-power and low-voltage real-time signal acquisition and processing system.

Real-Time Operation of Microgrids

Microgrid (MG) systems effectively integrate a generation mix of solar, wind, and other renewable energy resources. The intermittent nature of renewable resources and the unpredictable weather conditions contribute largely to the unreliability of microgrid real-time operation. This paper investigates the behavior of microgrid for different intermittent scenarios of photovoltaic generation in real-time. Reactive power coordination control and load shedding mechanisms are used for reliable operation and are implemented using OPAL-RT simulator integrated with Matlab. In an islanded MG, load shedding can be an effective mechanism to maintain generation-load balance. The microgrid of the German Jordanian University (GJU) is used for illustration. The results show that reactive power coordination control not only stabilizes the MG operation in real-time but also reduces power losses on transmission lines. The results also show that the power losses at some substations are reduced by a range of 6% - 9.8%.

The Design of I/O Subsystem in Satellite Real-Time Microkernel Operating System

One of the most important features of modern minor satellites is to realize autonomous moving. The performance of the satellite autonomous computer operating system acting as the control center is utmost important. The recent trend in operating system development is adopting microkernel architecture which holds such advantages as microminiaturization, modularity, portability and extendibility. The performance of I/O subsystem is currently receiving considerable research attention. Object-orientation offers an approach to application development in which software system can be constructed by composing and refining the pre-designed plug-compatible software components.It also starts with some basic notions fairly well accepted in computer science, namely encapsulation and reuse. In this paper, a new object-oriented real-time I/O subsystem model has been designed.In this model, the traditional I/O subsystem framework is discarded and a stream mechanism based on the object-oriented concept is introduced. In addition, the I/O requests are classified according to their time emergency to obtain real-time performance. So, this model meets such satelliteperformance requirements as reliability, flexibility, portability and real-time performance.

Digital arc welding power supply based on real-time operating system

A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculating speed and complete peripheral equipments, is very suitable to work as the controller of the digital power supply. The micro C/OS- Ⅱ transplanted in ARM, helps to improve the respondent speed against various welding signals, as well as the reliability of the controlling software. The welding process consists of nine tasks. The tasks of great significance on reliability of the welder, for example, the A/D conversion of current and voltage, enjoy top priority. To avoid simultaneous-sharing on A/D converter and LCD module, two semaphores are introduced in to ensure the smooth performance of the welding power supply. Proven by experiments ,the ARM and the micro C/OS- Ⅱ can greatly improve both the respondent speed and the reliability of the digital welder.

A Smart Phone-oriented Embedded Real-time Operating System

This article presents an embedded Smart Phone Operating System (SPOS) independently designed by ZTE Corporation. The SPOS is based on single kernel architecture with its multi-task real-time kernel supporting hardware platforms and resources of mainstream mobile phones. It has remarkable advantages such as highly efficient and dynamic power management, priority - based preemptive scheduling, fast startup, a variety of drivers, and excellent system stability and operability. For the development of upper layer communication protocols and application software, the SPOS provides wireless communication interfaces and the application program framework.

A Concept of Dynamically Reconfigurable Real-time Vision System for Autonomous Mobile Robotics

This paper describes specific constraints of vision systems that are dedicated to be embedded in mobile robots. If PC-based hardware architecture is convenient in this field because of its versatility, flexibility, performance, and cost, current real-time operating systems are not completely adapted to long processing with varying duration, and it is often necessary to oversize the system to guarantee fail-safe functioning. Also, interactions with other robotic tasks having more priority are difficult to handle. To answer this problem, we have developed a dynamically reconfigurable vision processing system, based on the innovative features of Cleopatre real-time applicative layer concerning scheduling and fault tolerance. This framework allows to define emergency and optional tasks to ensure a minimal quality of service for the other subsystems of the robot, while allowing to adapt dynamically vision processing chain to an exceptional overlasting vision process or processor overload. Thus, it allows a better cohabitation of several subsystems in a single hardware, and to develop less expensive but safe systems, as they will be designed for the regular case and not rare exceptional ones. Finally, it brings a new way to think and develop vision systems, with pairs of complementary operators.

MODEL-BASED DEVELOPMENT OF REAL-TIME SOFTWARE SYSTEM FOR ELECTRONIC UNIT PUMP SYSTEM

A real-time operating system （RTOS）, also named OS, is designed based on the hardware platform of MC68376, and is implemented in the electronic control system for unit pump in diesel engine. A parallel and time-based task division method is introduced and the multi-task software architecture is built in the software system for electronic unit pump （EUP） system. The V-model software development process is used to control algorithm of each task. The simulation results of the hardware-in-the-loop simulation system （HILSS） and the engine experimental results show that the OS is an efficient real-time kernel, and can meet the real-time demands of EUP system; The built multi-task software system is real-time, determinate and reliable. V-model development is a good development process of control algorithms for EUP system, the control precision of control system can be ensured, and the development cycle and cost are also decreased.

DEVELOPMENT OF AN AIRBORNE SAR REAL-TIME DIGITAL IMAGING PROCESSOR

An airborne SAR real-time digital imaging processor is presented, and its realtime digital imaging principle and main technical parameters are analyzed briefly. The system configuration and logical structure are described in detail. Finally the main features of this system and examples of imagery obtained with the system are also presented.

High performance reconfigurable hardware system for real-time image processing

A novel reconfigurable hardware system which uses both muhi-DSP and FPGA to attain high performance and real-time image processing are presented. The system structure and working principle of mainly processing multi-BSP board, extended multi-DSP board are analysed. The outstanding advantage is that the communication among different board components of this system is supported by high speed link ports ＆ serial ports for increasing the system performance and computational power. Then the implementation of embedded real-time operating systems （RTOS） by us is discussed in detail. In this system, we adopt two kinds of parallel structures controlled by RTOS for parallel processing of algorithms. The experimental results show that exploitive period of the system is short, and maintenance convenient. Thus it is suitable for real-time image processing and can get satisfactory effect of image recognition.

Influences of Network Delay on Quality of Experience for Soft Objects in Networked Real-Time Game with Haptic Sense

In this paper, we investigate the influences of network delay on QoE (Quality of Experience) such as the operability of haptic interface device and the fairness between players for soft objects in a networked real-time game subjectively and objectively. We handle a networked balloon bursting game in which two players burst balloons (i.e., soft objects) in a 3D virtual space by using haptic interface devices, and the players compete for the number of burst balloons. As a result, we find that the operability depends on the network delay from the local terminal to the other terminal, and the fairness is mainly dependent on the difference in network delay between the players’ terminals. We confirm that there exists a trade-off relationship between the operability and the fairness. We also see that the contribution of the fairness is larger than that of the operability to the comprehensive quality (i.e., the weighted sum of the operability and fairness). Assessment results further show that the output timing of terminals should be adjusted to the terminal which has the latest output timing to maintain the fairness when the difference in network delay between the terminals is large. In this way, the comprehensive quality at each terminal can be maintained as high as possible.

Architecture of the Graphics System for Embedded Real-Time Operating Systems

This paper presents a new architecture of a graphics system for microkernel operating systems,including real-time operating systems.The following major parts of the architecture are presented:a user-level subsystem responsible for interaction with user applications;a bottom-level subsystem providing the functionality for graphics drivers,such as managing graphics output,video memory management,etc.;a kernel-level subsystem providing interaction with the kernel,and performing low-level operations,such as working with physical memory,processes,etc.The mechanisms of interaction of user applications with the user level of the graphics system,as well as interaction of the different levels of the graphics subsystem are presented.The paper pays much attention to various approaches to testing:the use of unit testing,testing using hardware and software emulators.Another important characteristic of a graphics system is its performance,in particular the performance of low-level operations such as memory allocation:the developed architecture suggests using a separate memory allocator which is faster than standard memory allocation functions.Comparison of the performances of graphics system implementation for microkernel real-time operating system and graphics server Xorg is presented,showing significant superiority of the proposed architecture in a number of work scenarios.

Quantum Operator Model for Data Analysis and Forecast

A new dynamic model identification method is developed for continuous-time series analysis and forward prediction applications. The quantum of data is defined over moving time intervals in sliding window coordinates for compressing the size of stored data while retaining the resolution of information. Quantum vectors are introduced as the basis of a linear space for defining a Dynamic Quantum Operator (DQO) model of the system defined by its data stream. The transport of the quantum of compressed data is modeled between the time interval bins during the movement of the sliding time window. The DQO model is identified from the samples of the real-time flow of data over the sliding time window. A least-square-fit identification method is used for evaluating the parameters of the quantum operator model, utilizing the repeated use of the sampled data through a number of time steps. The method is tested to analyze, and forward-predict air temperature variations accessed from weather data as well as methane concentration variations obtained from measurements of an operating mine. The results show efficient forward prediction capabilities, surpassing those using neural networks and other methods for the same task.

Analysis and Comparison of Five Kinds of Typical Device-Level Embedded Operating Systems

Today, the number of embedded system was applied in the field of automation and control has far exceeded a variety of general-purpose computer. Embedded system is gradually penetrated into all fields of human society, and ubiquitous embedded applications constitute the 'ubiquitous' computing era. Embedded operating system is the core of the em-bedded system, and it directly affects the performance of the whole system. Our Liaoning Provincial Key Laboratory of Embedded Technology has successfully developed five kinds of device-level embedded operating systems by more than ten years’ efforts, and these systems are Webit 5.0, Worix, μKernel, iDCX 128 and μc/os-II 128. This paper mainly analyses and compares the implementation mechanism and performance of these five kinds of device-level embedded operating systems in detail.

Two-stage Correction Strategy-based Real-time Dispatch for Economic Operation of Microgrids

Given the different energy rates of multiple types of power generation units,different operation plans affect the economy of microgrids.Limited by load and power generation forecasting technologies,the economic superiority of day-ahead plans is unable to be fully utilized because of the fluctuation of loads and power sources.In this regard,a two-stage correction strategy-based real-time dispatch method for the economic operation of microgrids is proposed.Based on the optimal day-ahead economic operation plan,unbalanced power is validly allocated in two stages in terms of power increment and current power,which maintains the economy of the day-ahead plan.Further,for operating point offset during real-time correction,a rolling dispatch method is introduced to dynamically update the system operation plan.Finally,the results verify the effectiveness of the proposed method.

Factors Limiting Centralized Land Circulation in China from the Perspective of Farmers' Property Right

At present,there are many factors limiting large area centralized,rapid development,and moderately large-scale land operation in China.These factors include(i) the existing land utilization system is still at adaptation stage,and it lacks universal agreement of people on large-scale land operation;(ii) farmers' dependence on land is great;(iii) it is difficult to transfer surplus labor;(iv) there is no positive connection between promotion of moderately large-scale land operation and realization of increase of farmers' income;(v) it remains to be proved whether large-scale operation can become a stable rural occupation and whether big farming households can grow to professional farmers;(vi) large-scale land operation in rural areas may lead to waste of resources;(vii) the promotion of large-scale land operation may cause other social contradictions.

Evolution analysis of a UAV real-time operating system from a network perspective

With the flourishing development of Unmanned Aerial Vehicles(UAVs), the mission tasks of UAVs have become more and more complex. Consequently, a Real-Time Operating System(RTOS) that provides operating environments for various mission services on these UAVs has become crucial, which leads to the necessity of having a deep understanding of an RTOS. In this paper, an empirical study is conducted on FreeRTOS, a commonly used RTOS for UAVs, from a complex network perspective. A total of 85 releases of FreeRTOS, from V2.4.2 to V10.0.0, are modeled as directed networks, in which the nodes represent functions and the edges denote function calls. It is found that the size of the FreeRTOS network has grown almost linearly with the evolution of the versions, while its main core has evolved steadily. In addition, a k-core analysis-based metric is proposed to identify major functionality changes of FreeRTOS during its evolution.The result shows that the identified versions are consistent with the version change logs. Finally,it is found that the clustering coefficient of the Linux OS scheduler is larger than that of the FreeRTOS scheduler. In conclusion, the empirical results provide useful guidance for developers and users of UAV RTOSs.

海洋观测中的实时操作系统分析研究

海洋观测是获取海洋环境信息的重要方式,实时、可靠的操作系统是海洋观测中信息采集与处理系统的重要组成部分。实时操作系统计算的正确性不仅取决于计算的逻辑正确性,还取决于产生结果的时间。该系统具有高精度计时系统、多级中断嵌套机制和实时调度机制,这些特性保证任务在规定的时间内完成。文中对三个典型的操作系统(Wind River公司的Vx Works、BRTT公司的Antelope和开源的RTLinux)进行研究,并从功能、关键模块以及优缺点等方面进行分析论证,详细阐述了实时操作系统的功能特性以及实时操作系统在相关领域应用的重要性。

郑州市供水管网实时调度决策支持系统设计与开发

根据郑州市供水管网科学管理的需求,在运用宏观模型和数据挖掘技术的基础上,开发了供水管网实时调度决策支持系统。每一调度时段能根据历史调度数据,自动建立相应的数学模型,更新模型参数,刷新界面,从而为下一时段调度提供决策支持和方案参考。

A pre-generated matrix-based method for real-time robotic drilling chatter monitoring

Currently, due to the detrimental effects on surface finish and machining system, chatter has been one crucial factor restricting robotic drilling operations, which improve both quality and efficiency of aviation manufacturing. Based on the matrix notch filter and fast wavelet packet decomposition, this paper presents a novel pre-generated matrix-based real-time chatter monitoring method for robotic drilling. Taking vibration characteristics of robotic drilling into account, the matrix notch filter is designed to eliminate the interference of spindle-related components on the measured vibration signal. Then, the fast wavelet packet decomposition is presented to decompose the filtered signal into several equidistant frequency bands, and the energy of each sub-band is obtained. Finally, the energy entropy which characterizes inhomogeneity of energy distribution is utilized as the feature to recognize chatter on-line, and the effectiveness of the presented algorithm is validated by extensive experimental data. The results show that the proposed algorithm can effectively detect chatter before it is fully developed. Moreover, since both filtering and decomposition of signal are implemented by the pre-generated matrices, calculation for an energy entropy of vibration signal with 512 samples takes only about 0.690 ms. Consequently, the proposed method achieves real-time chatter monitoring for robotic drilling, which is essential for subsequent chatter suppression.

Economic optimization of smart distribution networks considering real-time pricing

With the development of smart meters,a realtime pricing(RTP)demand response is becoming possible for households in distribution networks.The power flow can be bidirectional in distribution networks which become smarter with distributed generators(DGs).It is expensive to import electricity from the generation far from load centers because of the cost of power loss and network use,so that it is more economical to use electricity generated by local distributed generators.Therefore,in order to curtail operating costs of distribution networks,this paper proposes a model of economic optimization conducted by distribution network operators.The electricity purchasing costs for distribution network operators are minimized by optimizing electric power from transmission systems and local distributed generators.Further,based on price elasticity,the formulations of load demand considering RTP are proposed with economic optimization of distribution networks.The economic optimization problems are resolved by an interior point method.The case study shows that peak load demand can be reduced about 3.5%because the household RTP and electricity purchasing costs of distribution network operators can save 28.86£every hour.