The density, equilibrium heat of fusion and equilibrium melting temperature of Nylon 1010 were determined by means of infrared spectrum, differential scanning calorimetry, wide angle X-ray diffraction and density meas...The density, equilibrium heat of fusion and equilibrium melting temperature of Nylon 1010 were determined by means of infrared spectrum, differential scanning calorimetry, wide angle X-ray diffraction and density measurement techniques. According to Starkweatber' s method crystalline density ρ_c and amorphous density ρ_a were estimated to be 1.098 and 1.003 g/cm^3 respectively by extrapolating the straight lines of the IR absorbanee against density to zero intensity. Owing to the less intense in absorbance and less sensitive to the change in crystallinity of the amorphors band the thus obtained ρ_c was too low in value. Thereby the value of the ratio ρ_c /ρ_a is far less than generally accepted mean value for most crystalline polymers. Accordingly, traditional X-ray diffraction method was used through determining thc crystalline dimension(a=4.9, b=5.4, c=27.8, α=49° β=77.0°, γ=63.5°), and a rather correct value of ρ_c or the crystal density 1.13 g/cm^3 was obtained. The equilibrium heat of fusion △H_m^0 was estimated to be 244.0 J/g piotting △H_m 's of specimens with different crystallinity against their corre sponding specific volumes_(sp), and extrapolating to completely crystalline condition (_(sp)~c= 1/ρ_c) As to the equilibrium melting temperature T_m^0, because of the easiness of recrystallization of melt crystallized Nylon 1010 specimen, the well-known Hoffman's T_m-T_c method failed in determining this value and an usually rarely used Kamide double extrapolation method was adopted. The so obtained value of T_m^0 487 seems to be fairly reasonable.展开更多
The kinetic behavior of isothermal and nonisothermal crystallization of nylon-1010 has been studied by means of dilatometry and differential scanning calorimetry, respectively. The isothermal and nonisothermal process...The kinetic behavior of isothermal and nonisothermal crystallization of nylon-1010 has been studied by means of dilatometry and differential scanning calorimetry, respectively. The isothermal and nonisothermal process can be described by Avrami equation and Ozawa equation, respectively. From the experimental results the kinetic parameters of crystallization and crystalline mechanism for isothermal and nonisothermal measurements are discussed.展开更多
The thermo-oxidative aging behaviors of Nylon 1010 films were studied by various analytical methods,such as measuring the chromaticity,relative viscosity,carbonyl index,UV absorbance at 280 nm and elongation at break ...The thermo-oxidative aging behaviors of Nylon 1010 films were studied by various analytical methods,such as measuring the chromaticity,relative viscosity,carbonyl index,UV absorbance at 280 nm and elongation at break of the aged films.The thermo-oxidative aging plots of the results obtained via these various methods at different temperatures are subjected to the time-temperature superposition analysis,which are found to be well superposed.The b＊ values are used as X axis and the other results,i.e.,relative viscosity,carbonyl index,UV absorbance at 280 nm and elongation at break,are used as V axis,respectively.The relationship between the b values and the other results is obtained,from which we can derive the changes of physical and chemical properties at different b＊ values.Since the b＊ values can be quickly determined by using a portable spectrophotometer,the on-line evaluation of the thermo-oxidative aging of Nylon 1010 can be realized.展开更多
Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning cal...Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.展开更多
Nylon 10T and nylon 10T/1010 samples were synthesized by direct melt polymerization.The isothermal crystallization kinetics of nylon 10T and nylon 10T/1010 was investigated by means of differential scanning calorimetr...Nylon 10T and nylon 10T/1010 samples were synthesized by direct melt polymerization.The isothermal crystallization kinetics of nylon 10T and nylon 10T/1010 was investigated by means of differential scanning calorimetry（DSC）.The crystallization kinetics under isothermal condition has been analyzed by the Avrami equation.It was found that the Avrami equation was well-suited to describe the isothermal crystallization kinetics,combined with the results of the Turnbull-Fisher equation.The values of Tm^0 and Kg were obtained by Hoffman-Weeks and Lauritzen-Hoffman equations,respectively.The activation energies for isothermal crystallization of nylon 10T and nylon 10T/1010 were determined using the Arrhenius equation and found to be-123.24 and-81.86 kJ·mol^（-1）,respectively,which reveals that the crystallization ability of nylon 10T/1010was lower than that of nylon 10T during the isothermal crystallization process.The crystal morphology was observed by means of polarized optical microscopy（POM）and X-ray diffraction（XRD）.It was found that the addition of sebacic acid comonomer did not change the crystal form of nylon 10T,but significantly increased the number and decreased the size of spherulites.展开更多
Thermal expansion characteristics of semimetal nylon composites (nylon 1010 incorporated with metal oxides) were analyzed with thermal expansion instrument. The changes of composite weight after being heated and the h...Thermal expansion characteristics of semimetal nylon composites (nylon 1010 incorporated with metal oxides) were analyzed with thermal expansion instrument. The changes of composite weight after being heated and the heat absorption and release of the composites were analyzed by carrying out TG-DSC experiments. Experimental results show that the average thermal expansion coefficient of the composites rises as the average diameter of the metal oxides decrease from room temperature to 160 ℃. Thermal dynamics and physical properties of the nylon composites change with the addition of the oxides; the crystallization temperature rises from 180 ℃ of pure nylon to 190 ℃ (maximum) and the melting point of the oxide composites also increases continuously with the addition of the oxides. The water content of the oxide/nylon composite is related to the kind and content of the oxide. The water content reaches its maximum when the content of oxide is 10%, and the 10% Al2O3/nylon composite has a water absorption ratio up to 1%.展开更多
Based on the X-ray scattering intensity theory and using the atomic scattering factorapproximate expression,the correction factors for three main crystalline peaks and an amorphouspeak of Nylon-1010 were calculated an...Based on the X-ray scattering intensity theory and using the atomic scattering factorapproximate expression,the correction factors for three main crystalline peaks and an amorphouspeak of Nylon-1010 were calculated and the formula of degree of crystallinity of Nylon-1010 wasderived by graphic multipeak resolution method. The results calculated are compatible with the density measurement and calorimetry.展开更多
文摘The density, equilibrium heat of fusion and equilibrium melting temperature of Nylon 1010 were determined by means of infrared spectrum, differential scanning calorimetry, wide angle X-ray diffraction and density measurement techniques. According to Starkweatber' s method crystalline density ρ_c and amorphous density ρ_a were estimated to be 1.098 and 1.003 g/cm^3 respectively by extrapolating the straight lines of the IR absorbanee against density to zero intensity. Owing to the less intense in absorbance and less sensitive to the change in crystallinity of the amorphors band the thus obtained ρ_c was too low in value. Thereby the value of the ratio ρ_c /ρ_a is far less than generally accepted mean value for most crystalline polymers. Accordingly, traditional X-ray diffraction method was used through determining thc crystalline dimension(a=4.9, b=5.4, c=27.8, α=49° β=77.0°, γ=63.5°), and a rather correct value of ρ_c or the crystal density 1.13 g/cm^3 was obtained. The equilibrium heat of fusion △H_m^0 was estimated to be 244.0 J/g piotting △H_m 's of specimens with different crystallinity against their corre sponding specific volumes_(sp), and extrapolating to completely crystalline condition (_(sp)~c= 1/ρ_c) As to the equilibrium melting temperature T_m^0, because of the easiness of recrystallization of melt crystallized Nylon 1010 specimen, the well-known Hoffman's T_m-T_c method failed in determining this value and an usually rarely used Kamide double extrapolation method was adopted. The so obtained value of T_m^0 487 seems to be fairly reasonable.
基金This work was supported by the National Basic Research Project-Macromolecular Condensed State.
文摘The kinetic behavior of isothermal and nonisothermal crystallization of nylon-1010 has been studied by means of dilatometry and differential scanning calorimetry, respectively. The isothermal and nonisothermal process can be described by Avrami equation and Ozawa equation, respectively. From the experimental results the kinetic parameters of crystallization and crystalline mechanism for isothermal and nonisothermal measurements are discussed.
文摘The thermo-oxidative aging behaviors of Nylon 1010 films were studied by various analytical methods,such as measuring the chromaticity,relative viscosity,carbonyl index,UV absorbance at 280 nm and elongation at break of the aged films.The thermo-oxidative aging plots of the results obtained via these various methods at different temperatures are subjected to the time-temperature superposition analysis,which are found to be well superposed.The b＊ values are used as X axis and the other results,i.e.,relative viscosity,carbonyl index,UV absorbance at 280 nm and elongation at break,are used as V axis,respectively.The relationship between the b values and the other results is obtained,from which we can derive the changes of physical and chemical properties at different b＊ values.Since the b＊ values can be quickly determined by using a portable spectrophotometer,the on-line evaluation of the thermo-oxidative aging of Nylon 1010 can be realized.
基金Supported by the National Science and Technology Support Program of China(No.2013BAE02B01)the Special Project on the Integration of Industry,Education and Research of Guangdong Province(No.2013B090500003)the Commissioner Workstation Project of Guangdong Province(No.2014A090906002)
文摘Nylon 10 T and Nylon 10T/1010 samples were synthesized by direct melt polymerization. The non-isothermal crystallization kinetics of Nylon 10 T and Nylon 10T/1010 was investigated by means of differential scanning calorimetry(DSC). Jeziorny equation and Mo equation were applied to describe the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. The activation energies for non-isothermal crystallization were obtained by Vyazovkin's method and Friedman's method, respectively. These results showed that Jeziorny equation and Mo equation well described the non-isothermal crystallization kinetics of the Nylon 10 T and the Nylon 10T/1010. It was found that the values of the activation energy for non-isothermal crystallization of the Nylon 10T/1010 were lower than those of the Nylon 10 T at a given temperature or relative crystallinity degree,which revealed that crystallization ability of the Nylon 10T/1010 was higher. The crystal morphology was observed by means of a polarized optical microscope(POM) and X-ray diffraction(XRD). It was found that the addition of sebacic acid comonomer not only did not change the crystal form of the Nylon 10 T, but also significantly increased the number and decreased the size of spherulites. Comparing with the Nylon 10 T, the crystallization rate was increased with the addition of the sebacic acid comonomer.
基金Supported by the National Science and Technology Support Program of China(No.2013BAE02B01)the Special Project on the Integration of Industry,Education and Research of Guangdong Province(No.2013B090500003)the Commissioner Workstation Project of Guangdong Province(No.2014A090906002)
文摘Nylon 10T and nylon 10T/1010 samples were synthesized by direct melt polymerization.The isothermal crystallization kinetics of nylon 10T and nylon 10T/1010 was investigated by means of differential scanning calorimetry（DSC）.The crystallization kinetics under isothermal condition has been analyzed by the Avrami equation.It was found that the Avrami equation was well-suited to describe the isothermal crystallization kinetics,combined with the results of the Turnbull-Fisher equation.The values of Tm^0 and Kg were obtained by Hoffman-Weeks and Lauritzen-Hoffman equations,respectively.The activation energies for isothermal crystallization of nylon 10T and nylon 10T/1010 were determined using the Arrhenius equation and found to be-123.24 and-81.86 kJ·mol^（-1）,respectively,which reveals that the crystallization ability of nylon 10T/1010was lower than that of nylon 10T during the isothermal crystallization process.The crystal morphology was observed by means of polarized optical microscopy（POM）and X-ray diffraction（XRD）.It was found that the addition of sebacic acid comonomer did not change the crystal form of nylon 10T,but significantly increased the number and decreased the size of spherulites.
基金Projects 50225519 supported by the National Natural Science Foundation of China and 0E4458the Youth Science Foundation of China University of Mining & Technology
文摘Thermal expansion characteristics of semimetal nylon composites (nylon 1010 incorporated with metal oxides) were analyzed with thermal expansion instrument. The changes of composite weight after being heated and the heat absorption and release of the composites were analyzed by carrying out TG-DSC experiments. Experimental results show that the average thermal expansion coefficient of the composites rises as the average diameter of the metal oxides decrease from room temperature to 160 ℃. Thermal dynamics and physical properties of the nylon composites change with the addition of the oxides; the crystallization temperature rises from 180 ℃ of pure nylon to 190 ℃ (maximum) and the melting point of the oxide composites also increases continuously with the addition of the oxides. The water content of the oxide/nylon composite is related to the kind and content of the oxide. The water content reaches its maximum when the content of oxide is 10%, and the 10% Al2O3/nylon composite has a water absorption ratio up to 1%.
基金This project was supported by the National Natural Science Foundation of China and the National Basic Research Project Macromolecular Condensed State.
文摘Based on the X-ray scattering intensity theory and using the atomic scattering factorapproximate expression,the correction factors for three main crystalline peaks and an amorphouspeak of Nylon-1010 were calculated and the formula of degree of crystallinity of Nylon-1010 wasderived by graphic multipeak resolution method. The results calculated are compatible with the density measurement and calorimetry.
