In situ, compatibilization of low density polyethylene (LDPE) (30%) and nylon-6 (70%) blends through one-step reactive extrusion using t-BuOOH as an initiator and low molecular weight interfacial agents as compatibili...In situ, compatibilization of low density polyethylene (LDPE) (30%) and nylon-6 (70%) blends through one-step reactive extrusion using t-BuOOH as an initiator and low molecular weight interfacial agents as compatibilizers was studied. The compatibilizer contained a long chain hydrocarbon, double bond and two polar functional groups which was capable of reacting with both LDPE and nylon-6 in the presence of initiator to form a copolymer at the interface of the two polymer phases. The extruded blends exhibited significant enhancement in their compatibility based on morphological, thermal analysis and mechanical studies. The effect of the hydrocarbon chain length and structure of the functional group of the compatibilizer was also examined. It was found that blends prepared by using the compatibilizer containing longer hydrocarbon chain and amide group had better mechanical properties.展开更多
A combined system consisting of hydrolysis acidification, denitrification and nitrification reactors was used to remove carbon and nitrogen from the nylon - 6 production wastewater, which was characterized by good bio...A combined system consisting of hydrolysis acidification, denitrification and nitrification reactors was used to remove carbon and nitrogen from the nylon - 6 production wastewater, which was characterized by good biodegradability and high nitrogen concentration. The influences of Chemical Oxygen Demand （COD） in the influent, recirculation ratio, Hydraulic Residence Time （HRT） and Dissolved Oxygen （DO） concentration on the system performances were investigated. From results it could be seen that good performances have been achieved during the overall experiments periods, and COD, Total Nitrogen （TN）, NH^＋ -N and Suspended Solids （SS） in the effluent were 53, 16, 2 and 24 mg· L^-1, respectively, which has satisfied the first standard of wastewater discharge established by Environmental Protection Agency （EPA） of China. Furthermore, results showed that operation factors, viz. COD in the influent, recirculation ratio, HRT and DO concentration, all had important influences on the system performances.展开更多
The graft copolymerization of 4-vinyl pyridine （4VP） onto nylon-6 （PA6） was studied by using potassium diperiodatonickelate（IV） （DPN）-PA6 redox system in alkaline medium. The structures of graft copolymers wer...The graft copolymerization of 4-vinyl pyridine （4VP） onto nylon-6 （PA6） was studied by using potassium diperiodatonickelate（IV） （DPN）-PA6 redox system in alkaline medium. The structures of graft copolymers were confirmed by Fourier transfer infrared spectroscopy （FTIR） and X-ray diffraction. The properties of graft copolymers were investigated by thermogravimetric analysis （TGA）. A mechanism was proposed to explain the generation of radicals and the initiation. The effects of reaction variables, such as the initiator concentration, the ratio of 4VP to PA6, pH as well as reaction temperature and time were investigated. Graft copolymers with high grafting efficiency （〉95%） were obtained, which indicated that DPN-PA6 redox system is an efficient initiator for this graft copolymerization. The quaternized PA6-g-P4VP （QPAVP） was proved to be an excellent adsorbent to heavy metal ions.展开更多
1 Results Electrospinning provides a simple and versatile method for preparing nanofibers with different morphology, such as porous fibers and nanotubes. It has been widely used for preparing nanomaterials with unique...1 Results Electrospinning provides a simple and versatile method for preparing nanofibers with different morphology, such as porous fibers and nanotubes. It has been widely used for preparing nanomaterials with unique properties and potential applications in medicine, catalyst, photonics and sensors[1, 2]. In this study, uniform Nylon-6 nanofibers with diameter of ≈300 nm by electrospun from formic acid solution containing 15%wt Nylon-6. Polypyrrole (PPy) was then deposited on the nanofibers by in-situ ...展开更多
尼龙6(PA6)树脂具有优异的性能,其连续纤维复合材料在汽车、航空航天领域具有广泛应用。但是PA6树脂熔融后黏度较高,不易对连续纤维充分浸渍,并且连续纤维与PA6的复合材料界面黏附性较差,限制了其复合材料的性能和应用。针对这些问题,...尼龙6(PA6)树脂具有优异的性能,其连续纤维复合材料在汽车、航空航天领域具有广泛应用。但是PA6树脂熔融后黏度较高,不易对连续纤维充分浸渍,并且连续纤维与PA6的复合材料界面黏附性较差,限制了其复合材料的性能和应用。针对这些问题,文中对连续玻璃纤维增强尼龙6(CGF/PA6)复合材料开展了研究。首先,采用阴离子开环聚合制备PA6,确定了其最佳制备工艺;其次,用硅烷偶联剂KH550(AP)对连续玻璃纤维(CGF)进行改性,并对其进行了红外光谱表征;最后,通过原位聚合法制备了CGF/PA6复合材料,研究了AP改性对CGF/PA6复合材料力学性能的影响,并对CGF/PA6复合材料的拉伸断口进行了扫描电镜分析。结果表明,AP被键合到了CGF表面,AP改性可以增强CGF/PA6复合材料的界面黏附性,从而使CGF/PA6复合材料的拉伸强度得到改善,当AP用量为2%时,CGF/PA6复合材料的拉伸强度高达88.52 MPa,此时,复合材料的断裂伸长率最低,为4.90%。CGF/PA6复合材料的冲击强度变化不大,均在50 k J/m2左右,说明复合材料的韧性受CGF表面改性影响较小。展开更多
Synergistic effect in network formation of nylon-6 （PA6） nanocomposites containing one dimensional （ID） multi-walled carbon nanotubes （CNTs） and two dimensional （2D） layered double hydroxide （LDH） platelets ...Synergistic effect in network formation of nylon-6 （PA6） nanocomposites containing one dimensional （ID） multi-walled carbon nanotubes （CNTs） and two dimensional （2D） layered double hydroxide （LDH） platelets on improving the mechanical properties has been studied. Mechanical tests show that, with incorporation of 1 wt% LDHs and 0.5 wt% CNTs, the tensile modulus, the yield strength as well as the hardness of the ternary composite are greatly improved by about 230%, 128% and 110% respectively, as compared with neat PA6. This is mainly attributed to the unique, strong interactions between the CNTs and the LDHs as well as the jammed network-like structure thus formed between the nanofillers, as confirmed by the morphological observations. As compared with the binary nanocomposites, a much enhanced solid-like behavior in the terminal region of the rheological curves can clearly be observed for the ternary system, which also indicates the formation of a percolating filler network.展开更多
文摘In situ, compatibilization of low density polyethylene (LDPE) (30%) and nylon-6 (70%) blends through one-step reactive extrusion using t-BuOOH as an initiator and low molecular weight interfacial agents as compatibilizers was studied. The compatibilizer contained a long chain hydrocarbon, double bond and two polar functional groups which was capable of reacting with both LDPE and nylon-6 in the presence of initiator to form a copolymer at the interface of the two polymer phases. The extruded blends exhibited significant enhancement in their compatibility based on morphological, thermal analysis and mechanical studies. The effect of the hydrocarbon chain length and structure of the functional group of the compatibilizer was also examined. It was found that blends prepared by using the compatibilizer containing longer hydrocarbon chain and amide group had better mechanical properties.
基金Shanghai Science and Technology Committee(No.042312045)Shanghai Post-doctor Fund
文摘A combined system consisting of hydrolysis acidification, denitrification and nitrification reactors was used to remove carbon and nitrogen from the nylon - 6 production wastewater, which was characterized by good biodegradability and high nitrogen concentration. The influences of Chemical Oxygen Demand （COD） in the influent, recirculation ratio, Hydraulic Residence Time （HRT） and Dissolved Oxygen （DO） concentration on the system performances were investigated. From results it could be seen that good performances have been achieved during the overall experiments periods, and COD, Total Nitrogen （TN）, NH^＋ -N and Suspended Solids （SS） in the effluent were 53, 16, 2 and 24 mg· L^-1, respectively, which has satisfied the first standard of wastewater discharge established by Environmental Protection Agency （EPA） of China. Furthermore, results showed that operation factors, viz. COD in the influent, recirculation ratio, HRT and DO concentration, all had important influences on the system performances.
文摘The graft copolymerization of 4-vinyl pyridine （4VP） onto nylon-6 （PA6） was studied by using potassium diperiodatonickelate（IV） （DPN）-PA6 redox system in alkaline medium. The structures of graft copolymers were confirmed by Fourier transfer infrared spectroscopy （FTIR） and X-ray diffraction. The properties of graft copolymers were investigated by thermogravimetric analysis （TGA）. A mechanism was proposed to explain the generation of radicals and the initiation. The effects of reaction variables, such as the initiator concentration, the ratio of 4VP to PA6, pH as well as reaction temperature and time were investigated. Graft copolymers with high grafting efficiency （〉95%） were obtained, which indicated that DPN-PA6 redox system is an efficient initiator for this graft copolymerization. The quaternized PA6-g-P4VP （QPAVP） was proved to be an excellent adsorbent to heavy metal ions.
文摘1 Results Electrospinning provides a simple and versatile method for preparing nanofibers with different morphology, such as porous fibers and nanotubes. It has been widely used for preparing nanomaterials with unique properties and potential applications in medicine, catalyst, photonics and sensors[1, 2]. In this study, uniform Nylon-6 nanofibers with diameter of ≈300 nm by electrospun from formic acid solution containing 15%wt Nylon-6. Polypyrrole (PPy) was then deposited on the nanofibers by in-situ ...
文摘尼龙6(PA6)树脂具有优异的性能,其连续纤维复合材料在汽车、航空航天领域具有广泛应用。但是PA6树脂熔融后黏度较高,不易对连续纤维充分浸渍,并且连续纤维与PA6的复合材料界面黏附性较差,限制了其复合材料的性能和应用。针对这些问题,文中对连续玻璃纤维增强尼龙6(CGF/PA6)复合材料开展了研究。首先,采用阴离子开环聚合制备PA6,确定了其最佳制备工艺;其次,用硅烷偶联剂KH550(AP)对连续玻璃纤维(CGF)进行改性,并对其进行了红外光谱表征;最后,通过原位聚合法制备了CGF/PA6复合材料,研究了AP改性对CGF/PA6复合材料力学性能的影响,并对CGF/PA6复合材料的拉伸断口进行了扫描电镜分析。结果表明,AP被键合到了CGF表面,AP改性可以增强CGF/PA6复合材料的界面黏附性,从而使CGF/PA6复合材料的拉伸强度得到改善,当AP用量为2%时,CGF/PA6复合材料的拉伸强度高达88.52 MPa,此时,复合材料的断裂伸长率最低,为4.90%。CGF/PA6复合材料的冲击强度变化不大,均在50 k J/m2左右,说明复合材料的韧性受CGF表面改性影响较小。
基金financially supported by the National Natural Science Foundation of China(No.51125011)Guangxi Small Highland Innovation Team of Talents in Colleges and Universities,Guangxi Funds for Specially-appointed ExpertsGuangxi Natural Science Foundation of China(No.2014GXNSFAA118321)
文摘Synergistic effect in network formation of nylon-6 （PA6） nanocomposites containing one dimensional （ID） multi-walled carbon nanotubes （CNTs） and two dimensional （2D） layered double hydroxide （LDH） platelets on improving the mechanical properties has been studied. Mechanical tests show that, with incorporation of 1 wt% LDHs and 0.5 wt% CNTs, the tensile modulus, the yield strength as well as the hardness of the ternary composite are greatly improved by about 230%, 128% and 110% respectively, as compared with neat PA6. This is mainly attributed to the unique, strong interactions between the CNTs and the LDHs as well as the jammed network-like structure thus formed between the nanofillers, as confirmed by the morphological observations. As compared with the binary nanocomposites, a much enhanced solid-like behavior in the terminal region of the rheological curves can clearly be observed for the ternary system, which also indicates the formation of a percolating filler network.
