The irfluences of C/S mass ratio and kieserite im-pregnation on performance of 95-grade magnesia bricks prepared using sintered magnesia DBM95 as main start-ing material, silica fi, me and limestone as additives were ...The irfluences of C/S mass ratio and kieserite im-pregnation on performance of 95-grade magnesia bricks prepared using sintered magnesia DBM95 as main start-ing material, silica fi, me and limestone as additives were researched. The cold and hot physical properties were tested according to Chinese standards on refractories. The hydration resistance was determined in a high pres-sure autoclave with 0. 55 MPa of water vapor pressure for different holding times of 0. 5 h, 3 h, and 5 h. The tri-al results show （ 1 ） adding silica fume to decrease C/S ratio from 0. 84 to 0. 33 improves sintering property; addin,g limestone to increase C/S ratio J？om 0. 84 to 1.95 causes more pores and negatively influences physi-cal properties： BD decreases, AP increases, MOR and CCS decrease generally, but HMOR increases obviously; （2） for non-impregnated specimens, adjusting C/S mass ratio can not improve hydration resistance; （3） the impregnation with kieserite solution can improve hydra-tion resistance of magnesia bricks significantly.展开更多
Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass r...Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass ratio of CaO to Al_2O_3 on surface tension were investigated.The results indicate that surface tension decreased with increasing MgO content(from 0 to 4.86%),followed by an increase with further increasing MgO content up to 11.33%.The trend that surface tension changed with the mass ratio of CaO to Al_2O_3 was the same as the trend that surface tension changed with the MgO content.The surface tension was varied from 0.617 N/m to 0.710 N/m,for the mass ratio of CaO to Al_2O_3 varying between 0.60 and 1.28.An attempt was made to estimate surface tension of CaO-Al_2O_3-MgO slag and its sub-system,and the application showed that the model worked well.展开更多
The competition-density (C-D) effects for mean mass for tree, stem, branch and leaf were analyzed in Acacia auriculiformis stands. Mean tree mass-density and mean organ mass-density were well explained by the C-D equa...The competition-density (C-D) effects for mean mass for tree, stem, branch and leaf were analyzed in Acacia auriculiformis stands. Mean tree mass-density and mean organ mass-density were well explained by the C-D equation of tree and the C-D equation of tree organ, respectively. An equation describing the relationship between mean leaf area u and density was formulated that fit the u-data well. The relationship between mean tree mass w and the ratio of each organ to mean tree mass (wo/ w) was examined. With increasing w, the stem mass ratio wS/w increased, whereas the branch mass ratio wB/w and the leaf mass ratio wL/w decreased. The yield difference between the lowest-density stand and the high-density stand became greater with stand growth. However, the yield of the mid-density stand was slightly lower than the yield of the high-density stand during the experimental period. To produce the most desirable combination of demanding individual-tree size and relative high stem yield, the mid-density is recommended as proper planting density for future management of A. auriculiformis stands.展开更多
文摘The irfluences of C/S mass ratio and kieserite im-pregnation on performance of 95-grade magnesia bricks prepared using sintered magnesia DBM95 as main start-ing material, silica fi, me and limestone as additives were researched. The cold and hot physical properties were tested according to Chinese standards on refractories. The hydration resistance was determined in a high pres-sure autoclave with 0. 55 MPa of water vapor pressure for different holding times of 0. 5 h, 3 h, and 5 h. The tri-al results show （ 1 ） adding silica fume to decrease C/S ratio from 0. 84 to 0. 33 improves sintering property; addin,g limestone to increase C/S ratio J？om 0. 84 to 1.95 causes more pores and negatively influences physi-cal properties： BD decreases, AP increases, MOR and CCS decrease generally, but HMOR increases obviously; （2） for non-impregnated specimens, adjusting C/S mass ratio can not improve hydration resistance; （3） the impregnation with kieserite solution can improve hydra-tion resistance of magnesia bricks significantly.
基金Project(51204115)supported by the National Natural Science Foundation of ChinaProject(BK20130308)supported by the Basic Research Program of Jiangsu Province,ChinaProject(2014M561710)supported by China Postdoctoral Science Foundation
文摘Surface tension of calcium aluminate refining slag was measured by the Slide method at 1823 K.Based on different levels of the MgO content and the mass ratio of CaO to Al_2O_3,the effects of MgO content and the mass ratio of CaO to Al_2O_3 on surface tension were investigated.The results indicate that surface tension decreased with increasing MgO content(from 0 to 4.86%),followed by an increase with further increasing MgO content up to 11.33%.The trend that surface tension changed with the mass ratio of CaO to Al_2O_3 was the same as the trend that surface tension changed with the MgO content.The surface tension was varied from 0.617 N/m to 0.710 N/m,for the mass ratio of CaO to Al_2O_3 varying between 0.60 and 1.28.An attempt was made to estimate surface tension of CaO-Al_2O_3-MgO slag and its sub-system,and the application showed that the model worked well.
基金supported by the Forestry Technology Popularization Demonstration Project of the Central Government of China(No.[2015]GDTK-07)
文摘The competition-density (C-D) effects for mean mass for tree, stem, branch and leaf were analyzed in Acacia auriculiformis stands. Mean tree mass-density and mean organ mass-density were well explained by the C-D equation of tree and the C-D equation of tree organ, respectively. An equation describing the relationship between mean leaf area u and density was formulated that fit the u-data well. The relationship between mean tree mass w and the ratio of each organ to mean tree mass (wo/ w) was examined. With increasing w, the stem mass ratio wS/w increased, whereas the branch mass ratio wB/w and the leaf mass ratio wL/w decreased. The yield difference between the lowest-density stand and the high-density stand became greater with stand growth. However, the yield of the mid-density stand was slightly lower than the yield of the high-density stand during the experimental period. To produce the most desirable combination of demanding individual-tree size and relative high stem yield, the mid-density is recommended as proper planting density for future management of A. auriculiformis stands.
