Exploring mechanism of hidden,steep obliquely inclined bedding landslides using a 3DEC model:A case study of the Shanyang landslide in Shaanxi Province,China

Catastrophic geological disasters frequently occur on slopes with obliquely inclined bedding structures(also referred to as obliquely inclined bedding slopes),where the apparent dip sliding is not readily visible.This phenomenon has become a focal point in landslide research.Yet,there is a lack of studies on the failure modes and mechanisms of hidden,steep obliquely inclined bedding slopes.This study investigated the Shanyang landslide in Shaanxi Province,China.Using field investigations,laboratory tests of geotechnical parameters,and the 3DEC software,this study developed a numerical model of the landslide to analyze the failure process of such slopes.The findings indicate that the Shanyang landslide primarily crept along a weak interlayer under the action of gravity.The landslide,initially following a dip angle with the support of a stable inclined rock mass,shifted direction under the influence of argillization in the weak interlayer,moving towards the apparent dip angle.The slide resistance effect of the karstic dissolution zone was increasingly significant during this process,with lateral friction being the primary resistance force.A reduction in the lateral friction due to karstic dissolution made the apparent dip sliding characteristics of the Shanyang landslide more pronounced.Notably,deformations such as bending and uplift at the slope’s foot suggest that the main slide resistance shifts from lateral friction within the karstic dissolution zone to the slope foot’s resistance force,leading to the eventual buckling failure of the landslide.This study unveils a novel failure mode of apparent dip creep-buckling in the Shanyang landslide,highlighting the critical role of lateral friction from the karstic dissolution zone in its failure mechanism.These insights offer a valuable reference for mitigating risks and preventing disasters related to obliquely inclined bedding landslides.

Modified inferior oblique anterior transposition for dissociated vertical deviation combined with superior oblique palsy:A case report

BACKGROUND Inferior oblique anterior transposition(IOAT)has emerged as an effective surgery in the management of dissociated vertical deviation(DVD)combined with superior oblique palsy(SOP).Traditional IOAT usually provides satisfactory primary position alignment and simultaneously restricts the superior floating phenomenon.However,it also increases the risk of the anti-elevation syndrome and narrowing of the palpebral fissure in straight-ahead gaze,especially after the unilateral operation.CASE SUMMARY We report the outcomes of the modified unilateral IOAT in two patients with unilateral DVD combined with SOP.The anterior-nasal fibers of the inferior oblique muscle were attached at 9 mm posterior to the corneal limbus along the temporal board of the inferior rectus muscle,the other fibers were attached a further 5 mm temporal to the anterior-nasal fibers.Postoperatively,both hypertropia and floating were improved,and no obvious complications occurred.CONCLUSION In these cases,the modified unilateral IOAT was an effective and safe surgical method for treating DVD with SOP.

Effectiveness of modified inferior oblique muscle belly transposition for V-pattern exotropia combined with mild to moderate inferior oblique muscle overaction

AIM:To investigate the effectiveness of a modified inferior oblique muscle belly transposition for treatment of V-pattern exotropia combined with mild to moderate inferior oblique muscle overaction.METHODS:Thirteen cases(23 affected eyes)of V-pattern exotropia with inferior oblique muscle overaction(+or++)who underwent the modified inferior oblique muscle belly transposition procedure were retrospectively reviewed.The amount of V-pattern,grade of inferior oblique overaction,degree of vertical strabismus,abnormal head posture,and the fovea-disc angle were evaluated before and after surgery.RESULTS:The V-pattern was corrected in all cases,and the amount of V-pattern reduced by 17.85±5.13 prism diopter(PD)on average(t=16.07,P<0.001).The surgical cure rate for mild to moderate inferior oblique muscle overaction was 87.0%(20/23).The degree of the foveadisc angle has a mean reduction of 5.45°±2.87°(t=3.95,P=0.003)after surgery.The mean vertical deviation in 5 cases with a small-angle hypertropia(5.23±3.06 PD)in the primary position reduced by 3.15±1.86 PD(t=6.10,P<0.001).No serious complications were observed.CONCLUSION:The modified inferior oblique muscle belly transposition procedure can effectively treat mild to moderate inferior oblique overaction and relieve the V-pattern,which is safe and easy to perform.

Architectural Model of a Dryland Gravel Braided River,based on 3D UAV Oblique Photogrammetric Data:A Case Study of West Dalongkou River in Eastern Xinjiang,China

Three-dimensional unmanned aerial vehicle(UAV)oblique photogrammetric data were used to infer mountainous gravel braided river lithofacies,lithofacies associations and architectural elements.Hierarchical architecture and lithofacies associations with detailed lithofacies characterizations were comprehensively described to document the architectural model,architectural element scale and gravel particle scale.(1)Nine lithofacies(i.e.,Gmm,Gcm,Gcc,Gci,Gcl,Ss,Sm,Fsm and Fl)were identified and classified as gravel,sand and fine matrix deposits.These are typical depositional features of a mountainous dryland gravel-braided river.(2)Three architectural elements were identified,including channel(CH),gravel bar(GB)and overbank(OB).CH can be further divided into flow channel and abandoned channel,while GB consists of Central Gravel bar(CGB)and Margin Gravel bar(MGB).(3)The gravel bar is the key architectural element of the gravel braided river,with its geological attributes.The dimensions of GBs and their particles are various,but exhibit good relationships with each other.The grain size of GB decreases downstream,but the dimensions of GB do not.The bank erosion affects the GB dimensions,whereas channel incision and water flow velocity influence the grain size of GB.The conclusions can be applied to the dryland gravel braided river studies in tectonically active areas.

Numerical Analysis of the Tunnel-Train-Air Interaction Problem in a Tunnel with a Double-Hat Oblique Hood

The tunnel-train-air interaction problem is investigated by using a numerical method able to provide relevant information about pressure fluctuations,aerodynamic drag characteristics and the“piston wind”effect.The method relies on a RNG k-εtwo-equation turbulence model.It is shown that although reducing the oblique slope can alleviate the pressure gradient resulting from initial compression waves at the tunnel entrance,the pressure fluctuations in the tunnel are barely affected;however,a large reduction of micro-pressure wave amplitudes is found outside the tunnel.In comparison to the case where no tunnel hood is present,the amplitudes of micro-pressure waves at 40 m from the tunnel reach an acceptable range.The aerodynamic drag of the head and tail fluctuates greatly while that of the intermediate region undergoes only limited variations when the high-speed train passes through the double-hat oblique tunnel.It is shown that the effects of the oblique slope of the portal on the aerodynamic drag can almost be ignored while the train speed plays an important role.

Retrospective Case Series of Porous Titanium Cages in Oblique Lumbar Interbody Fusion Surgery Assessing Subsidence, Fusion and Functional Outcomes

Purpose: Implant subsidence is a possible complication of spinal interbody fusion. We aim to evaluate porous titanium cages subsidence, fusion and functional outcomes in patients subjected to oblique lumbar interbody fusion (OLIF) with these novel devices. Methods: Our institutional review board approved a single-center experience which included 60 patients who underwent OLIF from June 2018 to June 2020 utilizing the porous titanium implants. Data was collected in accordance with the Declaration of Helsinki, and written informed consent was obtained. Imaging studies including radiographs 1, 3, 6 and 12 months and computed tomography (CT) scan at 6 months obtained during routine postoperative follow-up visits, were studied for signs of implant subsidence, fusion and clinical parameters to determine the effectiveness of surgery such as Oswestry disability index (ODI). Results: Radiographic subsidence occurred in 1 out of 89 porous titanium interbody cages (1.1%). No subsidence was observed in the posterior screws and rods fixation group (N = 57). However, one case of subsidence occurred in the lateral plate fixation group (N = 3). The subsidence occurred in an osteoporotic elderly patient operated for adjacent segment disease, and she was later revised with posterior instrumentation using cemented screws and rods. She had an uneventful recovery. Fusion rates were evaluated under CT scan at 6 months with a rate of 88%. In terms of clinical outcomes, ODI decreased significantly from 20.3 preop to 10.7 postop with a P-value Conclusions: In our study, the subsidence rate was lower than previously reported in the literature. Also, we had good fusion rates at 6 months likely due to the porous titanium cages use. We had no subsidence in the posterior instrumented group and one case in the lateral fixation group with improved clinical outcomes.

Treatment of Single Level Lumbar Spondylolisthesis with Lumbar Interbody Fusion via Oblique Lateral Approach (OLIF)

Objectives: To investigate the effect of lumbar interbody fusion via the oblique lateral approach (OLIF) in the treatment of single level lumbar spondylolisthesis. Methods: Retrospective analysis was made on 32 cases of single level lumbar spondylolisthesis treated by lumbar interbody fusion via the oblique lateral approach from July 2020 to July 2021. 14 males and 18 females;the age was (66.5 ± 11.5) years (55 - 82 years). 1) The operation time, intraoperative blood loss and complications were recorded;2) the scores of visual analog scale. VAS and Oswestry disability index (ODI) of low back pain and lower limb pain were collected before operation and at the last follow-up;by observing the imaging data, the height of the intervertebral space, the anterior convex angle of the intervertebral space, the anterior convex angle of the lumbar spine, the sagittal diameter of the dural sac and the spondylolisthesis were measured. Results: All patients successfully completed the operation, the average operation time was (103.9 ± 21.1) min, the average intraoperative bleeding volume was (72.3 ± 16.4) ml. There was no vascular injury during the operation, no infection occurred in all surgical incisions, and Class I/A healing was achieved. The VAS scores of low back pain and leg pain before operation and at the last follow-up were lower than those before operation, and the difference was statistically significant (P < 0.05);the ODI at the last follow-up was lower than that before operation, and the difference was statistically significant (P < 0.05). At the last follow-up, the height of intervertebral space, the height of intervertebral foramen and the sagittal diameter of dural sac were greater than those before operation, with statistically significant differences (P < 0.05);the spondylolisthesis rate at the last follow-up was lower than that before operation, with a statistically significant difference (P < 0.05). Left thigh surface numbness occurred in 2 cases (6.3%) and disappeared after 1 week;Hip flexion weakness occurred in 1 case (0.03%), which recovered after 12 days;there were no complications such as retroperitoneal hematoma, ureteral injury, retrograde ejaculation, intestinal and lumbar plexus injury. Conclusion: The early clinical effect of OLIF in the treatment of single level lumbar spondylolisthesis is significant. This surgical method is minimally invasive, safe and effective, which can significantly reduce the amount of intraoperative bleeding and reduce the risk of postoperative complications. Its main working principle is to make the annulus fibrosus, posterior longitudinal ligament and ligamentum flavum shrink and recover the height of the intervertebral space through decompression, loosening and stretching of the intervertebral space, so as to achieve the reduction of the slipped vertebral body, increase the height of the intervertebral foramen Enlarge the spinal canal volume and eliminate dynamic compression to play an indirect decompression role, improve the symptoms of low back and leg pain, and reconstruct the stability of the spine through interbody fusion.

Greedy Randomized Gauss-Seidel Method with Oblique Direction

For the linear least squares problem with coefficient matrix columns being highly correlated, we develop a greedy randomized Gauss-Seidel method with oblique direction. Then the corresponding convergence result is deduced. Numerical examples demonstrate that our proposed method is superior to the greedy randomized Gauss-Seidel method and the randomized Gauss-Seidel method with oblique direction.

The criterion of the existence or inexistence of transverse shock wave at wedge supported oblique detonation wave

A simplified theoretic method and numerical simulations were carried out to investigate the characterization of propagation of transverse shock wave at wedge supported oblique detonation wave.After solution validation,a criterion which is associated with the ratio Φ （u 2 /u CJ） of existence or inexistence of the transverse shock wave at the region of the primary triple was deduced systematically by 38 cases.It is observed that for abrupt oblique shock wave （OSW）/oblique detonation wave （ODW） transition,a transverse shock wave is generated at the region of the primary triple when Φ 〈 1,however,such a transverse shock wave does not take place for the smooth OSW/ODW transition when Φ 〉 1.The parameter Φ can be expressed as the Mach number behind the ODW front for stable CJ detonation.When 0.9 〈 Φ 〈 1.0,the reflected shock wave can pass across the contact discontinuity and interact with transverse waves which are originating from the ODW front.When 0.8 〈 Φ 〈 0.9,the reflected shock wave can not pass across the contact discontinuity and only reflects at the contact discontinuity.The condition （0.8 〈 Φ 〈 0.9） agrees well with the ratio （D ave /D CJ） in the critical detonation.

Comparison of excyclotorsion following graded inferior oblique recession for primary versus secondary inferior oblique overaction

AIM:To compare the changes in excyclotorsion after inferior oblique(IO)recession in patients with primary and secondary inferior oblique overaction(IOOA).METHODS:We retrospectively analyzed the data obtained from patients with IOOA who underwent graded IO recession.The patients were followed up for at least 3 mo after surgery.Fundus photographs were taken preand postoperatively,and the sum of the angles of torsion in both eyes was used to analyze changes in excyclotorsion.Patients were divided into two groups:those diagnosed with primary IOOA were enrolled in the 1’IOOA group,and those diagnosed with secondary IOOA caused by superior oblique palsy(SOP)were enrolled in the 2’IOOA group.Excyclotorsion before and after surgery were compared between the two groups.RESULTS:A total of 78 patients were enrolled in this study:34 eyes in the 1’IOOA group and 44 eyes in the 2’IOOA group.In the 78 patients,torsional angle significantly decreased from 15.31°±7.40°to 12.11°±6.53°after IO recession(P<0.001).Mean preoperative torsional angle was larger in the 2’IOOA group than in the 1’IOOA group(P=0.03).In both groups,excyclotorsion significantly decreased after IO recession(P=0.001 and P<0.001,respectively);however,there was no significant difference in the amounts of changes in excyclotorsion between the two groups.CONCLUSION:Excyclotorsion is significantly larger in secondary IOOA than in primary IOOA,and a significant decrease in the torsional angle occurs after IO recession in both types of IOOA.

基于Oblique显示技术的钝性外伤患者肋骨隐匿性骨折的影像诊断及其分型研究

目的:应用Oblique显示技术对肋骨隐匿性骨折进行诊断及分型。方法:选取2014年3月-2018年12月就诊于本院106例明确钝性外伤史疑似肋骨隐匿性骨折患者,所有患者经常规显示技术均未发现肋骨骨折。所有患者应用Oblique显示技术检查进行肋骨隐匿性骨折诊断,并根据骨折累及程度及表现形式进行肋骨隐匿性骨折分型。结果:106例患者共有189根肋骨存在隐匿性骨折,分为单皮质缘骨折、双皮质缘骨折及钝性骨挫伤。其中单皮质缘骨折105根,包括单纯外缘骨皮质褶皱成角64根,内缘骨皮质褶皱成角41根;内缘及外缘同时褶皱成角的双皮质缘骨折55根;骨皮质缘光滑无褶皱,仅表现为髓腔内骨髓水肿的钝性骨挫伤29根。结论:Oblique显示技术可以提高肋骨隐匿性骨折的诊断率,并能依据累及程度及表现形式进行合理分型。

Reflection of Oblique Incident Waves by Breakwaters with Partially-Perforated Wall

The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity potentials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.

Oblique perforation of thick metallic plates by rigid projectiles

Oblique perforation of thick metallic plates by rigid projectiles with various nose shapes is studied in this paper. Two perforation mechanisms, i.e., the hole enlargement for a sharp projectile nose and the plugging formation for a blunt projectile nose, are considered in the proposed analytical model. It is shown that the perforation of a thick plate is dominated by several non-dimensional numbers, i.e., the impact function, the geometry function of projectile, the non-dimensional thickness of target and the impact obliquity. Explicit formulae are obtained to predict the ballistic limit, residual velocity and directional change for the oblique perforation of thick metallic plates. The proposed model is able to predict the critical condition for the occurrence of ricochet. The proposed model is validated by comparing the predictions with other existing models and independent experimental data.

Periodic oscillation and fine structure of wedge-induced oblique detonation waves

An oblique detonation wave for a Mach 7 inlet flow over a long enough wedge of 30 turning angle is simulated numerically using Euler equation and one-step rection model.The fifth-order WENO scheme is adopted to capture the shock wave.The numerical results show that with the compression of the wedge wall the detonation wave front structure is divided into three sections：the ZND model-like strcuture,single-sided triple point structure and dual-headed triple point strucuture.The first structure is the smooth straight,and the second has the characteristic of the triple points propagating dowanstream only with the same velocity,while the dual-headed triple point structure is very complicated.The detonation waves facing upstream and downstream propagate with different velocities,in which the periodic collisions of the triple points cause the oscillation of the detonation wave front.This oscillation process has temporal and spatial periodicity.In addition,the triple point trace are recorded to obtain different cell structures in three sections.

Characteristics and mechanism investigation on drag reduction of oblique riblets

This work primarily focuses on the drag reduction characteristics and mechanism investigation of oblique riblets. First, a calculation model of the oblique riblets surface is established, and Reynolds stress model(RSM) turbulence model is used for numerical simulation of the oblique riblets flow field. Subsequently, the influence of inclination angle between flow direction and arrangement direction of riblets on friction resistance and drag reduction rate is further analyzed. Through the investigation of the distribution of shear stress, pressure stress and velocity in oblique riblets boundary layer, the oblique riblets drag reduction mechanism is finally revealed. Results show that, with increase of velocity and inclination angle, the pressure resistance increases obviously, along with the decreasing of the viscous resistance distinctly. The maximum drag reduction rate of the oblique riblets is 7.33%. Moreover, when the inclination angle increases, the wall shear stress reduces on oblique riblets surface; while differential pressure increases at both sides of oblique riblets tips. In addition, when inclination angle is small, the secondary vortex at oblique riblets tips will disappear soon. New vortices will be formed inside the oblique riblets and cause the decrease of viscosity resistance. Thus, oblique riblets show a better drag reduction effect and have an effective control on boundary layer.

Physical Modeling of Landslide Mechanism in Oblique Thick-Bedded Rock Slope: A Case Study

The Jiweishan landslide illustrates the failure pattern of an apparent dip slide of an oblique thick-bedded rockslide. Centrifugal modeling was performed using a model slope consisting of four sets of joints to investigate the landslide initiation mechanism. Crack strain gauges pasted between the slide blocks and the base failed in sequence from the rear to the front as the centrifugal acceleration increased. When the acceleration reached 16.3g, the instantaneous failure of the key block in the front triggered the apparent dip slide of all blocks. The physical modeling results and previous studies suggest that the strength reduction in the weak layer and the failure of the key block are the main reasons for the Jiweishan landslide. The centrifuge experiment validated the previously proposed driving-blocks-key-block model of apparent dip slide in oblique with inclined bedding rock slopes. In addition, the results from limit equilibrium method and centrifuge test suggest that even though the failure of the key block in the front is instantaneous, a progressive stable-unstable transition exists.

The force of oblique incident wave on the breakwater with a partially perforated wall

Wave forces induced by the interaction between the oblique incident wave and the breakwater with a partially perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigen-function expansion method is applied to expanding velocity potentials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with other theories and a good agreement can be found between them. Experimental data have been compared with the present theoretical results. The effect of the traverse wall on wave forces has been discussed in detail. On the basis of the linear wave theory, it is shown that in the range Of engineering practice, the incident angle of wave has small influence on wave forces on the unit length of perforated caisson.

Inferior oblique weakening surgery on ocular torsion in congenital superior oblique palsy

AIM: To investigate changes in fundus excyclotorsion after inferior oblique myectomy or myotomy. METHODS: The records of 21 patients undergoing strabismus surgery by a single surgeon between 2009 and 2012 were examined. Only patients who had undergone an inferior oblique myectomy or myotomy,with or without horizontal rectus muscle surgery, were evaluated. Digital fundus photographs were obtained,and the angle formed by a horizontal line passing through the optic disc center and a reference line connecting the foveola and optic disc center was measured. Associated clinical factors examined include age at the time of surgery, presence or absence of a head tilt, degree of preoperative vertical deviation,torsional angle, inferior oblique muscle overaction/superior oblique muscle underaction, and surgery laterality. Whether the procedure was performed alone or in combination with a horizontal rectus muscle surgery was also examined. RESULTS: Mean preoperative torsional angle was12. 0 ± 6. 4 °, which decreased to 6. 9 ± 5. 7 ° after surgery(P 【0.001, paired t-test). Torsional angle also decreased from 15. 1 ± 7. 0 ° to 6. 2 ± 4. 3 ° in the myectomy group(P 【0.001, paired t-test) but there were no significant changes in the myotomy group(P =0.093, Wilcoxon signed rank test). Multivariable linear regression analysis showed that preoperative torsional angle, degree ofinferior oblique overaction, and age at surgery independently and significantly affected postoperative torsional angle.CONCLUSION: Mean torsional angle decreased after inferior oblique myectomy. Degree of preoperative torsional angle, inferior oblique overaction, and age at surgery influence postoperative torsional angle.

Oblique wave scattering by a semi-infinite elastic plate with finite draft floating on a step topography

On the basis of a potential theory and Euler-Bernoulli beam theory, an analytical solution for oblique wave scattering by a semi-infinite elastic plate with finite draft floating on a step topography is developed using matched eigenfunction expansions. Different from previous studies, the effects of a wave incident angle, a plate draft, three different plate edge conditions （free, simply supported and built-in） and a sea-bottom topography are all taken into account. Moreover, the plate edge conditions are directly incorporated into linear algebraic equations for determining unknown expansion coefficients in velocity potentials, which leads to a simple and efficient solving procedure. Numerical results show that the convergence of the present solution is good, and an energy conservation relation is well satisfied. Also, the present predictions are in good agreement with known results for special cases. The effects of the wave incident angle, the plate draft, the plate edge conditions and the sea-bottom topography on various hydrodynamic quantities are analyzed. Some useful results are presented for engineering designs.

Propagation characteristics of oblique incidence terahertz wave through non-uniform plasma

The propagation characteristics of oblique incidence terahertz(THz) waves through non-uniform plasma are investigated by the shift-operator finite-difference time-domain(SO-FDTD) method combined with the phase matching condition.The electron density distribution of the non-uniform plasma is assumed to be in a Gaussian profile. Validation of the present method is performed by comparing the results with those obtained by an analytical method for a homogeneous plasma slab.Then the effects of parameters of THz wave and plasma layer on the propagation properties are analyzed. It is found that the transmission coefficients greatly depend on the incident angle as well as on the thickness of the plasma, while the polarization of the incident wave has little influence on the propagation process in the range of frequency considered in this paper. The results confirm that the THz wave can pass through the plasma sheath effectively under certain conditions,which makes it a potential candidate to overcome the ionization blackout problem.