We have performed sequential studies on new types of soft rubber for their application as artificial skin in robots and haptic sensors. Based on a proposed electrolytic polymerization method and novel adhesion techniq...We have performed sequential studies on new types of soft rubber for their application as artificial skin in robots and haptic sensors. Based on a proposed electrolytic polymerization method and novel adhesion technique for rubber and a metal that utilizes a metal complex hydrate, we have developed an MCF rubber sensor. This sensor uses a magnetic compound fluid (MCF), natural rubber (NR-latex) or chloroprene rubber latex (CR-latex), and requires the application of a magnetic field. The potential application of the developed sensor in various engineering scenarios and our daily lives is significant. In this regard, we investigated the effects of γ-irradiation, infrared radiation, microwaves, and a thermal source on the MCF rubber sensor. We established that the MCF rubber is effective enough to be used for power generation of broadband electro-magnetic waves from γ-rays to microwaves, including the range of the solar spectrum, which is the typical characteristic obtained in the present investigation. The remarkable attribute is that the MCF rubber sensor dose is not degraded by γ-irradiation. We also demonstrated the effectiveness of the MCF rubber sensor in energy harvesting.展开更多
In crosswell observation of electromagnetic tomography, now there is no feasible way to calibrate the in situ radiation constant, while the effect of induced wave field always exists in observational data. Therefor...In crosswell observation of electromagnetic tomography, now there is no feasible way to calibrate the in situ radiation constant, while the effect of induced wave field always exists in observational data. Therefore the absorption coefficient obtained by a common used image reconstruction method is only a relative value. The consistency of tomograms in linked profiles inevitably is affected seriously. An improved equation involving the effect of induced wave field and an alternative tracing method to calculate the in situ radiation constant is proposed in the present paper. Based on the results from a series of parameter calibration performed in water and the experiments with rock samples, the standard meter readings of borehole electromagnetic systems, types EW—1 and JWQ—3, are accurately defined here. Additionally, frequency reduction and boundary smoothing of linked profiles are discussed. In research on groundwater prospecting in Tanggongta, Inner Mongolia, we used the above mentioned method and obtained the tomograms of linked profiles with good consistency. The absorption coefficient in the tomogram are not only reasonable and reliable, but also coincided with the result from rock parameter measurement. The depth, extension direction and water bearing structure of two aquifers were well detected. This result correctly guides hydrologic drilling there.展开更多
A coordinated physicomathematical model for the propagation of a soliton-like electromagnetic pulse in a heterogeneous medium is developed in the presence of strong discontinuities in the electromagnetic field. The mo...A coordinated physicomathematical model for the propagation of a soliton-like electromagnetic pulse in a heterogeneous medium is developed in the presence of strong discontinuities in the electromagnetic field. The model is based on the reduction of Maxwell’s equations to the well-studied wave equation. When the electromagnetic pulse was specified, its amplitude modulation was taken into account, as was the nonstationary broadening of the spectral line. Conditions for matching the momentum for the first initial boundary-value problem are obtained. The time dispersion of the electrical induction is taken into account in terms of the function of signal conditioning which takes account of the broadening of its spectral line and integration over the continuous spectrum. With this approach, it is not necessary to neglect spatial derivatives, and also to use spatial nonlocal relations to take account of the effect of surface charge, surface current, and spatial dispersion of electrical induction at the interfaces of adjacent media.展开更多
This paper proposes a new metamaterial design that can achieve electromagnetic induction transparency-like (EIT-like) effects in the microwave band. The unit structure of metamaterials consists of square rings and met...This paper proposes a new metamaterial design that can achieve electromagnetic induction transparency-like (EIT-like) effects in the microwave band. The unit structure of metamaterials consists of square rings and metal wires. The square ring acts as the “bright state” and the metal wire acts as the “dark state”. The destructive interference between the bright state and the dark state produces an EIT-like effect. In the simulation results, a transparent window centered at 4.00 GHz can be observed in the transmission spectrum. By studying the phase change of the transparent window, it is found that the group delay of the metamaterial structure can reach 0.39 ns at 4.00 GHz. This paper </span><span>also studies the influence of the refractive index of the medium on the</span><span> EIT-like effect. Numerical simulations show that such metamaterial is very sensitive to the refractive index of the medium, and the sensitivity is 15 mm/RIU. Our design can be extended to other frequency bands and may have potential applications in filtering, sensing, slow-light devices, and nonlinear optics.展开更多
文摘We have performed sequential studies on new types of soft rubber for their application as artificial skin in robots and haptic sensors. Based on a proposed electrolytic polymerization method and novel adhesion technique for rubber and a metal that utilizes a metal complex hydrate, we have developed an MCF rubber sensor. This sensor uses a magnetic compound fluid (MCF), natural rubber (NR-latex) or chloroprene rubber latex (CR-latex), and requires the application of a magnetic field. The potential application of the developed sensor in various engineering scenarios and our daily lives is significant. In this regard, we investigated the effects of γ-irradiation, infrared radiation, microwaves, and a thermal source on the MCF rubber sensor. We established that the MCF rubber is effective enough to be used for power generation of broadband electro-magnetic waves from γ-rays to microwaves, including the range of the solar spectrum, which is the typical characteristic obtained in the present investigation. The remarkable attribute is that the MCF rubber sensor dose is not degraded by γ-irradiation. We also demonstrated the effectiveness of the MCF rubber sensor in energy harvesting.
文摘In crosswell observation of electromagnetic tomography, now there is no feasible way to calibrate the in situ radiation constant, while the effect of induced wave field always exists in observational data. Therefore the absorption coefficient obtained by a common used image reconstruction method is only a relative value. The consistency of tomograms in linked profiles inevitably is affected seriously. An improved equation involving the effect of induced wave field and an alternative tracing method to calculate the in situ radiation constant is proposed in the present paper. Based on the results from a series of parameter calibration performed in water and the experiments with rock samples, the standard meter readings of borehole electromagnetic systems, types EW—1 and JWQ—3, are accurately defined here. Additionally, frequency reduction and boundary smoothing of linked profiles are discussed. In research on groundwater prospecting in Tanggongta, Inner Mongolia, we used the above mentioned method and obtained the tomograms of linked profiles with good consistency. The absorption coefficient in the tomogram are not only reasonable and reliable, but also coincided with the result from rock parameter measurement. The depth, extension direction and water bearing structure of two aquifers were well detected. This result correctly guides hydrologic drilling there.
文摘A coordinated physicomathematical model for the propagation of a soliton-like electromagnetic pulse in a heterogeneous medium is developed in the presence of strong discontinuities in the electromagnetic field. The model is based on the reduction of Maxwell’s equations to the well-studied wave equation. When the electromagnetic pulse was specified, its amplitude modulation was taken into account, as was the nonstationary broadening of the spectral line. Conditions for matching the momentum for the first initial boundary-value problem are obtained. The time dispersion of the electrical induction is taken into account in terms of the function of signal conditioning which takes account of the broadening of its spectral line and integration over the continuous spectrum. With this approach, it is not necessary to neglect spatial derivatives, and also to use spatial nonlocal relations to take account of the effect of surface charge, surface current, and spatial dispersion of electrical induction at the interfaces of adjacent media.
文摘This paper proposes a new metamaterial design that can achieve electromagnetic induction transparency-like (EIT-like) effects in the microwave band. The unit structure of metamaterials consists of square rings and metal wires. The square ring acts as the “bright state” and the metal wire acts as the “dark state”. The destructive interference between the bright state and the dark state produces an EIT-like effect. In the simulation results, a transparent window centered at 4.00 GHz can be observed in the transmission spectrum. By studying the phase change of the transparent window, it is found that the group delay of the metamaterial structure can reach 0.39 ns at 4.00 GHz. This paper </span><span>also studies the influence of the refractive index of the medium on the</span><span> EIT-like effect. Numerical simulations show that such metamaterial is very sensitive to the refractive index of the medium, and the sensitivity is 15 mm/RIU. Our design can be extended to other frequency bands and may have potential applications in filtering, sensing, slow-light devices, and nonlinear optics.
