Comparison of engineering failures and seismic responses of 500 kV transformer-bushing systems in the 2022 Luding earthquake

Cemented and mechanically clamped types of end fittings(fitting-C and fitting-M)are commonly used in transformer bushings.During the Luding Ms 6.8 earthquake that occurred in China on September 5,2022,all transformer bushings with the two types of end fittings in a 500 kV substation were damaged.Post-earthquake field investigations were conducted,and the failures of the two types of bushings were compared.Two elementary simulation models of the transformer-bushing systems were developed to simulate the engineering failures,and further compute their seismic responses for comparison.The results indicate that the hitch lugs of the connection flange are structurally harmful to seismic resistance.Fitting-M can decrease the bending stiffness of the bushing due to the flexible sealing rubber gasket.Since it provides a more flexible connection that dissipates energy,the peak accelerations and relative displacements at the top of the bushing are significantly lower than those of the bushing with fitting-C.Compared with fitting-C,fitting-M transfers the high-stress areas from the connection flange to the root of the porcelain,so the latter becomes the most vulnerable component.Fitting-M increases the failure risk of the low-strength porcelain,indicating the unsuitability of applying it in high-intensity fortification regions.

Variable-based Ramberg-Osgood constitutive model of power spinning bushing

The influences of power spinning process parameters on the mechanical properties of spinning parts were analyzed with an SXD100/3-CNC numerical control power spinning machine.The unidirectional tensile tests were carried out.Based on the experimental data,a ternary quadratic regression equation was established by orthogonal experiment.The Ramberg-Osgood constitutive model of tin-bronze connecting rod bushing was obtained.Referred to the constitutive relation of macroscopic incremental,the incremental elastoplastic constitutive relation of spinning parts was deduced based on the Mises yield criterion and kinematic hardening model.The results can be applied to the elastoplastic analysis in finite element numerical simulation.

Comprehensive evaluation of the transformer oil-paper insulation state based on RF-combination weighting and an improved TOPSIS method

The accurate identification of the oil-paper insulation state of a transformer is crucial for most maintenance strategies.This paper presents a multi-feature comprehensive evaluation model based on combination weighting and an improved technique for order of preference by similarity to ideal solution(TOPSIS)method to perform an objective and scientific evaluation of the transformer oil-paper insulation state.Firstly,multiple aging features are extracted from the recovery voltage polarization spectrum and the extended Debye equivalent circuit owing to the limitations of using a single feature for evaluation.A standard evaluation index system is then established by using the collected time-domain dielectric spectrum data.Secondly,this study implements the per-unit value concept to integrate the dimension of the index matrix and calculates the objective weight by using the random forest algorithm.Furthermore,it combines the weighting model to overcome the drawbacks of the single weighting method by using the indicators and considering the subjective experience of experts and the random forest algorithm.Lastly,the enhanced TOPSIS approach is used to determine the insulation quality of an oil-paper transformer.A verification example demonstrates that the evaluation model developed in this study can efficiently and accurately diagnose the insulation status of transformers.Essentially,this study presents a novel approach for the assessment of transformer oil-paper insulation.

Application of the Finite Element Method in the Glass Fiber Bushing Research

Design and optimization of bushing at present mainly use the traditional experience method.The relevant research that adopts computer simulation to carry on the operation behavior of the bushing has appeared in recent years.How to use the finite element method to research bushing was introduced in the article.Physics fields and many relevant parameters of one real bushing were calculated.Through the results of calculation,it indicate that the finite element method is very useful in bushing research of designing and optimizing.

Study on Heating Uniformity of Pt-Rh Alloy Bushing for Producing Flexible Glass

The numerical simulation for temperature distribution of Pt-Rh alloy bushing was carried out using a thermal-electric module in ANSYS Workbench finite element analysis software.The effects of side wall thickness,plug thickness,the angle of two side walls and electrode structure on the uniformity of temperature distribution were investigated.Meanwhile,the contrastive analysis results of bushing with and without glass melt were discussed.The simulation results show that,when the homogeneous glass melt flows through bushing,the temperature difference between the center and both ends of bushing is decreased significantly,but the temperature distribution at both ends of bushing is still affected by heating non-uniformity of bushing.Compared with side wall thickness,plug thickness and the angle of two side walls,electrode structure plays a greater role in adjusting heating uniformity of bushing.

Earthquake Response and Isolation Layer Parameter Effect of Seismic Isolation Systems of Transformers With Bushings

国内外震害表明，变压器在地震中的破坏型式多样，易损性极高。隔震技术是一项能够有效降低地震反应的新型抗震技术，而变压器及套管隔震层的设计和参数选择与普通结构有较大的差异。首先，建立了大型电力变压器及套管隔震体系的多质点分析模型，采用Matlab软件编写计算程序，分别输入人工地震波和Taft地震波，对变压器及套管隔震体系的地震响应进行分析；最后，开展了隔震层等效水平网0度、等效阻尼比、双线性恢复力模型的屈服剪力系数及屈服后刚度等参数的地震响应影响分析。分析结果表明：合理设计变压器及套管隔震体系的隔震层参数，可有效降低变压器及套管的地震响应；另外，通过隔震层的参数分析，得到了相关参数的合理取值范围。该研究对今后变压器及套管隔震体系的设计具有参考与指导作用。

Platinum/rhodium Alloy Bushing for Drawing Glass Fibers in Centrifugal-spinneret-blow Process

In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bushing.The diameter and microstructure of glass fibers have been investigated by scanning electron microscopy(SEM) and vertical optical microscope(VOM).The results indicated that the flow rate of molten glass was proportional to the diameter of glass fibers when the molten glass got main flow rate of 330 kg/h.The lower the flow rate was,the finer the average diameter was.

The Investigation of Replacing Ceramic Bushings with Silicon Bushings in the Distribution Transformers

In recent years, the deficiencies of ceramic insulators along with their high maintenance costs have resulted in the replacement of ceramic insulators with silicon type in the pollution area. This idea has been employed for more than two decades in the polluted areas. Humidity of the weather in the south of Iran and the presence of pollutants in the air have made special conditions for construction and maintenance of some equipment including transformer bushings. Usual ceramic bushings, due to their ability in absorbing pollution and the rapid reduction of creepage distance (in a limited time period), have reduced transformer disconnection severely as a result of earth fault. Additionally, they are costly to be washed regularly. Therefore, using intelligent materials in designing bushing can increase the reliability of network and consequently reduction of costs. In this regard, this paper investigates the use of silicon bushings in the distribution systems and proposes operational ideas for the optimal operation of these devices in the polluted areas. The sample bushing was evaluated based on the IEC60137 standard test.

Chaotic Characteristic of Time Series of Partial Discharge in Oil-Paper Insulation

The chaotic characteristics of time series of five partial discharge （PD） patterns in oil-paper insulation are studied. The results verify obvious chaotic characteristic of the time series of discharge signals and the fact that PD is a chaotic process. These time series have distinctive features, and the chaotic attractors obtained from time series differed greatly from each other by shapes in the phase space, so they could be used to qualitatively identify the PD patterns. The phase space parameters are selected, then the chaotic characteristic quantities can be extracted. These quantities could quantificationally characterize the PD patterns. The effects on pattern recognition of PRPD and CAPD are compared by using the neural network of radial basis function. The results show that both of the two recognition methods work well and have their respective advantages. Then, both the statistical operators under PRPD mode and the chaotic characteristic quantities under CAPD mode are selected comprehensively as the input vectors of neural network, and the PD pattern recognition accuracy is thereby greatly improved.

Design and Range of Application of Slot Bushings with Volumetric Orifice Fields

A design of a slot bushing with a volumetric field has been developed, which allows to produce continuous fibers from melts with difficult processing characteristics in order to produce fibers with better operating characteristics. The operability of the design was confirmed when solving two problems of special technological complexity. 1. 400 and 800 orifice bushings for production of continuous fibers from the basalt melt have been developed and recommended for manufacture. 2. The process of production of continuous fibers from standard glass using 2400 orifice bushing with perforated plates instead of orifice tips without air cooling, has been realized for the first time.

The Research of Connection between Degree of Polymerization and Frequency Domain Dielectric Spectroscopy Characteristics during Oil-Paper Insulation Aging

In order to study the linkage effects between degree of polymerization and frequency domain dielectric spectroscopy characteristics of oil-paper insulation, the frequency domain dielectric response test platform of oil-paper insulation is set up. Complex permittivity of oil-paper insulation respectively composed by new or aged oil and insulation paper with different DP are tested, and complex permittivity of oil-paper insulation respectively composed by insulation respectively composed by new oil and insulation paper with different DP and low or high moisture content are tested. The test results are analyzed, and the analysis results show that the degree of polymerization of insulation paper has an influence on complex permittivity of oil-paper insulation though influencing the distribution of moisture and acids between oil and paper.

Torsional stiffness modeling and optimization of the rubber torsion bushing for a light tracked vehicle

Taking the rubber torsion bushing of a certain type of all-terrain tracked vehicle as the research object,a theoretical model of torsional stiffness was proposed according to the non-linear characteristics of rubber components and structural feature of the suspension. Simulations were carried out under different working conditions to obtain root mean square of vertical weighted acceleration as the evaluation index for ride performance of the all-terrain tracked vehicle,with a dynamics model of the whole vehicle based on the theoretical model of the torsional stiffness and standard road roughness as excitation input. Response surface method was used to establish the parametric optimization model of the torsional stiffness. The evaluation index showed that ride performance of the vehicle with optimized torsional stiffness model of suspension was improved compared with previous model fromexperiment. The torsional stiffness model of rubber bushing provided a theoretical basis for the design of the rubber torsion bushing in light tracked vehicles.

一种新的Bush型分形曲面及其维数

在 Bush型分形曲线的基础上 ,首先构造了一种分形曲面 ,然后研究这种曲面的分形维数及光滑性。得到了曲面的 Box维数 ,Packing维数的计算公式以及 Hausdorff维数的下界估计式。

Bush型函数的分形维数及其奇异性

本文给出了一类无处可微的连续函数──Ｂｕｓｈ型函数的Ｂｏｘ维数的精确值及其Ｈａｕｓｄｏｒｆｆ维数的下界估计值，同时讨论了Ｂｕｓｈ型函数的奇异性特征．

用Bush型函数构造分形纹理图

给出一类以Bush型函数构造分形纹理图的方法。用hx方法构造的纹理图可以事先确定其精确的Box－counting维数和Packing维数等分形量，因而可广泛应用于图像分析和图像处理中。

Bush有限单元原理及其在航天器结构建模中的应用

利用大量的数值计算确定了MSC.NASTRAN软件中广义弹簧单元(Bush)刚度阵的解析表达式,通过对比Bush元与剪切梁元的刚度阵,推导了Bush元参数与剪切梁刚度参数的对应关系,并利用展开状态的太阳翼结构和大型桁架结构的静力和动力分析验证了推导结果。该研究揭示了Bush有限单元的原理和所有输入参数的物理含义,有助于Bush元在结构有限元分析中的准确使用。

Bush型函数图像的K-维数

研究一类基于实数的Cantor级数表示的分形函数———Bush型函数图像的K-维数.得到了这类函数图像的K-维数的上、下界估计式.指出在基于实数的b进制表示的情形下,这类函数图像的K-维数等于其box维数与pack ing维数.

A finite element analysis of a large thrust elastic metal-plastics bearing bush for a hydraulic turbine

Presents the study on the pressure and friction fields of the lubricant film on the surface of a large thrust elastic metal plastic bearing bush in a hydraulic turbine using the method of finite element analysis and the stress and displacement fields in the vertical direction of the bush surface obtained to provide a theoretical basis for the design of contour lines and investigation into the causes for destruction of bushes, and concludes with test results that 1) the stress on the surface of the bush is not uniform; 2) a tension stress tends to occur near the oil ingress and egress edges but it is minor; 3) the biggest displacement in the vertical direction appears where x=84 and Y=1 153 and has a value of 0.022 mm; 4) the deformation of the bearing bush is harmful to the maintenance of lubricant film.

Experimental Investigation on the Bush Inner Surface Temperature of a High Speed Spiral Oil Wedge Sleeve Bearing

The temperature of bush inner surface temperature is measured by using infrared thermometer and transparent bearing,and temperature rise is measured by using thermocouple. The influence of rotating speed and axial location on the bush inner surface temperature is studied,and the influence of supply pressure and rotating speed on the temperature rise is analyzed. The results show the bush inner surface temperature and temperature rise of spiral oil wedge hydrodynamic bearing increase with the increase of rotation speed. In axial direction,the temperature is higher around the oil return hole. The temperature rise decreases with the increase of supply pressure. The highest temperature of bush inner surface and temperature rise are higher at higher speed,so the temperature rise is the fundamental reason which restricts the increase of rotation speed for high speed sleeve bearing.

Analysis of radial stiffness of rubber bush used in dynamic vibration absorber

In order to study the influence of the structural parameters of the rubber bush on its radial stiffness, the constitutive relation of rubber materiel is used to obtain the calculation formula of the dimensionless radial stiffness coefficient. The obtained theoretical result is consistent with previous research results in both long rubber bushes and short rubber bushes. The simulation case was conducted by the finite element method to verify the correctness of the theory. The axial compression experiment was conducted to obtain the parameters needed in the simulation. The result shows that the percentage difference between the theoretical result and the simulation one is only 2.75%. A series of simulations were conducted to compare with previous work, and the largest magnitude of the percentage difference is only about 5%. Finally, the radial stiffness experiment was conducted by using a dynamic vibration absorber, and the influence of the structural parameters of the rubber bush on its radial stiffness is obtained. The result shows that the radial stiffness of the rubber bush increases with the increase in the length and the inner radius, but decreases with the increase in the outer radius.