Fluid property identification of the Lower Cretaceous reservoirs with complex oil-water contacts in Deseo Basin,Chad

Recently,exploration breakthroughs have been made in the Lower Cretaceous sandstone reservoirs in the Doseo Basin,but the identification of reservoir fluid property is difficult due to variable reservoir lithology,complex oil-water contact within and faint responses of the oil zone,which causes the lower accuracy of reservoir fluid property identification with conventional mudlogging and wirelogging techniques.Applying the geochemical logging,fluorescent logging,mud logging and cutting logging technology,in combination with formation test data,this paper distinguishes the crude oil types,analyzes the logging response characteristics of oil zone after water washing,and establishes the interpretation charts and parameter standards for reservoir fluid properties.The crude oil can be divided into two types,namely viscous-heavy and thin-light,based on total hydrocarbon content and component concentration tested by mud logging,features of pyrolysis gas chromatogram and fluorescence spectroscopy.The general characteristics of oil layers experienced water washing include the decrease of total hydrocarbon content and component concentration from mud logging,the decrease of S1 and PS values from geochemical logging,the decrease of hydrocarbon abundance and absence of some light components in pyrolysis gas chromatogram,and the decrease of fluorescence area and intensity from fluorescence logging.According to crude oil types,the cross plots of S1 versus peak-baseline ratio,and the cross plots of rock wettability versus fluorescence area ratio are drawn and used to interpret reservoir fluid property.Meanwhile,the standards of reservoir fluid parameter are established combining with the parameters of PS and the parameters in above charts,and comprehensive multiparameter correlation in both vertical and horizontal ways is also performed to interpret reservoir fluid property.The application in the Doseo Basin achieved great success,improving interpretation ability of fluid property in the reservoir with complex oil-water contact,and also provided technical reference for the efficient exploration and development of similar reservoirs.

Characterization of Flame Retardancy and Oil-Water Separation Capacity of Superhydrophobic Silylated Melamine Sponges

A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourier-transform infrared)spectroscopy,SEM(Scanning electron microscopy)and in terms of water contact angles.Its oil-water absorption and separation capacities were measured by FT-IR and UV-visible spectrophoto-metry.The experimental results have shown that oligomeric silanol covalently bonds by Si-N onto the surface of melamine sponge skeletons.SMS has shown superhydrophobicity with a water contact angle exceeding 150°±1°,a better separation efficiency with regard to diesel oil(by 99.31%(wt/wt%)in oil-water mixture and even up to 99.99%(wt/wt%)for diesel oil in its saturated aqueous solution.Moreover,SMS inherited the intrinsicflame retardancy of the melamine sponge.In general,SMS has shown superhydrophobicity,high porosity,excellent selectivity,remarkable recyclability,and better absorption capacity for various oils and organic solvents,and a high separation efficiency for oil in saturated aqueous solutions.

Numerical Simulation of Oil-Water Two-Phase Flow in Low Permeability Tight Reservoirs Based on Weighted Least Squares Meshless Method

In response to the complex characteristics of actual low-permeability tight reservoirs,this study develops a meshless-based numerical simulation method for oil-water two-phase flow in these reservoirs,considering complex boundary shapes.Utilizing radial basis function point interpolation,the method approximates shape functions for unknown functions within the nodal influence domain.The shape functions constructed by the aforementioned meshless interpolation method haveδ-function properties,which facilitate the handling of essential aspects like the controlled bottom-hole flow pressure in horizontal wells.Moreover,the meshless method offers greater flexibility and freedom compared to grid cell discretization,making it simpler to discretize complex geometries.A variational principle for the flow control equation group is introduced using a weighted least squares meshless method,and the pressure distribution is solved implicitly.Example results demonstrate that the computational outcomes of the meshless point cloud model,which has a relatively small degree of freedom,are in close agreement with those of the Discrete Fracture Model(DFM)employing refined grid partitioning,with pressure calculation accuracy exceeding 98.2%.Compared to high-resolution grid-based computational methods,the meshless method can achieve a better balance between computational efficiency and accuracy.Additionally,the impact of fracture half-length on the productivity of horizontal wells is discussed.The results indicate that increasing the fracture half-length is an effective strategy for enhancing production from the perspective of cumulative oil production.

Preparation of Silica Nanosphere with Vertical Pore and Its Application in Oil-water Separation

Uniform monodispersed mesoporous silica nanospheres with vertical pores were successfully synthesized using chiral amphiphilic small molecule L-16Ala5PyClO4and solvents as dual templates via solgel transcription.The morphologies and pore sizes of silicas are adjustable by changing the type and amount of solvents in the reaction systems.With the increase of the organic solvent content,the morphologies of the obtained silica changed from nanospheres with vertical pore structures to nanosheets structures.When 1 mL of benzene,cyclohexane or toluene were used as solvents,only silica nanospheres were obtained,the BET surface areas of silica nanospheres reached 600.7,669.5,and 560.8 m^(2)/g,respectively.The pore sizes were 3.51,3.54,and 3.46 nm,respectively.Significantly,these ordered silica nanospheres/poly(vinyl alcohol-co-ethylene)(PVAco-PE)nanofiber membranes have high separation efficiencies(>99%)for n-hexane/water mixtures.

Wax deposition modeling in oil-water stratified pipe flow

Wax deposition in oil-water stratified flow is commonly encountered onshore and offshore oil production pipe systems,and typically reduces transportation capacity of oil.The accurate predicted model of wax deposition has becomes an indispensable approach to design effective remediation strategies.However,a reliable mechanistic model for wax deposition prediction in oil-water two-phase stratified pipe flow is lacking to validate the deposition process.In this work,a three-dimensional(axial,radial,and angular)robust wax deposit model for oil-water stratified circular pipe flow was developed.The model of formation of a gel deposit based on the first principles of rheology was developed,associated with the results obtained from hydrodynamics and heat/mass transfer simulations.The predictions for wax deposition are found to compare satisfactorily with experimental data with two different oils for single phase and four different water cuts for oil-water stratified pipe flow.It can be seen from the wax gelation mechanism that an increase in water cut can help to reduce the wall/oil-deposit interface shear stress,thereby leading to an increase in the degree of gelation as well as the deposit rate.Furthermore,a local deposit analysis in the circumferential direction was conducted,for water cut 75%and total flow rate 5 m3/h,which provided insights to understand that the thickness on pipe wall was roughly uniformly distributed locates near the top of the pipe and the nearer the position gets close to two points,where the oil-water interface contacts the inner wall,the deposition thickness quickly dropped to 0.It was attributed to the fact that a roughly uniformly thickness far away from the oil-water interface contact the inner wall resulted in the slowly changes temperature along the circumferential pipe wall wetted by oil.

Preparation of Hydrophobic Fly Ash by Surface Modification and Oil-water Separation Devices

A simple and effective superhydrophobic mesh was designed and made to separate oil-water mixture. Alkali-activated fly ash reacted with 1-bromooctadecane to prepare superhydrophobic modified fly ash (MFA) with low surface energy through Williamson ether synthesis. The MFA powder was then coated uniformly on a stainless steel mesh (SSM) along with the epoxy resin E44 and curing agent T31 to give the superhydrophobic MFA-modified stainless steel mesh (MFA-SSM). The MFA-SSM has a high static water contact angle (CA) of 150.1°and can separate various oil or organic solvent from water with>95%separation efficiency. The oil-water separation efficiency remained high after 30 runs of petroleum ether/water separation.The developed superhydrophobic stainless steel mesh is expected to have wider use in oil-water separation.

Relationship between Kawasaki disease and abdominal pain

This editorial presents an analysis of an article recently published in the World Journal of Clinical Cases.Kawasaki disease(KD)is a well-known pediatric vasculitis characterized by fever,rash,conjunctivitis,oral mucosal changes,and swelling of the extremities.This editorial aims to delve into the intricate relationship between KD and abdominal pain,drawing insights from recent research findings to provide a comprehensive understanding and potential avenues for future investigation.

Quantifying source-sink relationships in leaf-color modified rice genotypes during grain filling

Leaf-color modification can affect canopy photosynthesis,with potential effects on rice yield and yield components.Modulating source-sink relationships through crop management is often used to improve crop productivity.This study investigated whether and how modifying leaf color alters source-sink relationships and whether current crop cultivation practices remain applicable for leaf-color modified genotypes.Periodically collected data of total biomass and nitrogen(N)accumulation in rice genotypes of four genetic backgrounds and their leaf-color modified variants(greener or yellower)were analyzed,using a recently established modelling method to quantify the source-sink(im)balance during grain filling.Among all leaf-color variants,only one yellower-leaf variant showed a higher source capacity than its normal genotype.This was associated with greater post-flowering N-uptake that prolonged the functional leaf-N duration,and this greater post-flowering N-uptake was possible because of reduced pre-flowering N-uptake.A density experiment showed that current management practices(insufficient planting density accompanied by abundant N application)are unsuitable for the yellower-leaf genotype,ultimately limiting its yield potential.Leaf-color modification affects source-sink relationships by regulating the N trade-off between pre-and post-flowering uptake,as well as N translocation between source and sink organs.To best exploit leaf-color modification for improving crop productivity,adjustments of crop management practices are required.

What diameter?What height?Influence of measures of average tree size on area-based allometric volume relationships

Volume is an important attribute used in many forest management decisions.Data from 83 fixed-area plots located in central New Brunswick,Canada,are used to examine how different measures of stand-level diameter and height influence volume prediction using a stand-level variant of Honer's(1967)volume equation.When density was included in the models(Volume=f(Diameter,Height,Density))choice of diameter measure was more important than choice of height measure.When density was not included(Volume=f(Diameter,Height)),the opposite was true.For models with density included,moment-based estimators of stand diameter and height performed better than all other measures.For models without density,largest tree estimators of stand diameter and height performed better than other measures.The overall best equation used quadratic mean diameter,Lorey's height,and density(root mean square error=5.26 m^3·ha^(-1);1.9%relative error).The best equation without density used mean diameter of the largest trees needed to calculate a stand density index of 400 and the mean height of the tallest 400 trees per ha(root mean square error=32.08 m^(3)·ha^(-1);11.8%relative error).The results of this study have some important implications for height subsampling and LiDAR-derived forest inventory analyses.

Three anti-inflammatory polysaccharides from Lonicera japonica Thunb.:insights into the structure-function relationships

This study demonstrates the feasibility of producing three polysaccharides(neutral LJP-1,acidic LJP-2 and acidic LJP-3)with significant in vitro and in vivo anti-inflammatory activities from the flowers of Lonicera japonica.The three polysaccharides differed in chemical composition,molecular weight(Mw)distribution,glycosidic linkage pattern,functional groups and morphology.They exhibited excellent protective effects(in a dose-dependent manner)in lipopolysaccharide-injured RAW264.7 macrophages and Cu SO4-damaged zebrafish via reducing NO production and inhibiting the overexpressions of inflammation-related transcription factors,inflammatory proteins and cytokines in the NF-κB/MAPK signaling pathways.Their antiinflammatory effects varied owing to their different molecular characteristics and chemical compositions.Overall,LJP-2 at 400μg/m L was the most effective.LJP-2 consisted mainly of→5)-α-L-Araf(1→,→4)-α-LGalp A(1→and→2)-α-L-Rhap(1→residues with terminal T-β-D-Glcp.Thus,honeysuckle flowers are good sources of anti-inflammatory polysaccharides,and precise fractionation enables the production of potent antiinflammatory agents for the development of functional foods and healthcare products.

Bidirectional relationship between diabetes mellitus and depression:Mechanisms and epidemiology

Diabetes mellitus and depression exhibit a complex bidirectional relationship that profoundly impacts patient health and quality of life.This review explores the physiological mechanisms,including inflammation,oxidative stress,and neu-roendocrine dysregulation,that link these conditions.Psychosocial factors such as social support and lifestyle choices also contribute significantly.Epidemiological insights reveal a higher prevalence of depression among diabetics and an in-creased risk of diabetes in depressed individuals,influenced by demographic variables.Integrated management strategies combining mental health asse-ssments and personalized treatments are essential.Future research should focus on longitudinal and multi-omics studies to deepen understanding and improve therapeutic outcomes.

Characterizing permeability-porosity relationships of porous rocks using a stress sensitivity model in consideration of elastic-structural deformation and tortuosity sensitivity

Clarifying the relationship between stress sensitivities of permeability and porosity is of great significance in guiding underground resource mining.More and more studies focus on how to construct stress sensitivity models to describe the relationship and obtain a comprehensive stress sensitivity of porous rock.However,the limitations of elastic deformation calculation and incompleteness of considered tortuosity sensitivity lead to the fact that the existing stress sensitivity models are still unsatisfactory in terms of accuracy and generalization.Therefore,a more accurate and generic stress sensitivity model considering elastic-structural deformation of capillary cross-section and tortuosity sensitivity is proposed in this paper.The elastic deformation is derived from the fractal scaling model and Hooke's law.Considering the effects of elastic-structural deformation on tortuosity sensitivity,an empirical formula is proposed,and the conditions for its applicability are clarified.The predictive performance of the proposed model for the permeability-porosity relationships is validated in several sets of publicly available experimental data.These experimental data are from different rocks under different pressure cycles.The mean and standard deviation of relative errors of predicted stress sensitivity with respect to experimental data are 2.63%and 1.91%.Compared with other models,the proposed model has higher accuracy and better predictive generalization performance.It is also found that the porosity sensitivity exponent a,which can describe permeability-porosity relationships,is 2 when only elastic deformation is considered.a decreases from 2 when structural deformation is also considered.In addition,a may be greater than 3 due to the increase in tortuosity sensitivity when tortuosity sensitivity is considered even if the rock is not fractured.

Monitor and Acceptance among Couples in Romantic Relationships:Actor-Partner Interdependence Models Based on the Monitor and Acceptance Theory

Communication could be an essential part of couples in their daily life.Based on Monitor and Acceptance Theory(MAT),the present study explored the mediating role of communication in the relationship between mindfulness and relationship quality among college-student couples.The research examined the dynamic relationship of monitoring and acceptance to relationship satisfaction in the Actor-Partner Interdependence Model(APIM),and the mediating effect of positive or negative communications in these relationships.A total of 96 pairs of couples in the universities in Nanjing,China participated in the research.Momentary measurements were used to measure the momentary levels of their monitor,acceptance,positive/negative communication,and relationship satisfaction.A Hierarchical Linear Model(HLM)was used to deal with the APIM.Results showed that the women’s monitor facet of state mindfulness negatively predicted men’s relationship satisfaction through women’s negative communication,and the women’s acceptance facet of state mindfulness positively predicted women’s relationship satisfaction through women’s positive and negative communication at the within-person level.The study highlights the importance of cooperation in monitoring and acceptance for couples to own and hold high levels of relationship satisfaction.

Elucidating the structure-activity relationship of Cu-Ag bimetallic catalysts for electrochemical CO_(2) reduction

Developing bimetallic catalysts is an effective strategy for enhancing the activity and selectivity of electrochemical CO_(2) reduction reactions,where understanding the structure-activity relationship is essential for catalyst design.Herein,we prepared two Cu-Ag bimetallic catalysts with Ag nanoparticles attached to the top or the bottom of Cu nanowires.When tested in a flow cell,the Cu-Ag catalyst with Ag nanoparticles on the bottom achieved a faradaic efficiency of 54%for ethylene production,much higher than the catalyst with Ag nanoparticles on the top.The catalysts were further studied in the H-cell and zero-gap MEA cell.It was found that placing the two metals in the intensified reaction zone is crucial to triggering the tandem reaction of bimetallic catalysts.Our work elucidates the structure-activity relationship of bimetallic catalysts for CO_(2) reduction and demonstrates the importance of considering both catalyst structures and cell characteristics to achieve high activity and selectivity.

The Relationship between Father-Love Absence and Loneliness:Based on the Perspective of the Social Functionalist Theory and the Social Needs Theory

Fathers play an important role in adolescents’development,which is significant for their development and influences their mental health,including feeling of loneliness.However,the effects and mechanisms of father-love absence on individual loneliness are not clear.Based on the social functionalist theory and the social needs theory,this study examines the influence of individual fatherlove absence on loneliness and its underlying mechanisms.A questionnaire survey was administered to 319 junior high school students and 1,476 high school students.The results showed that adolescents with father-love absence had higher levels of loneliness,and that father-love absence affected loneliness levels through mediating pathways of individual gratitude,peer relationships,and gratitude to peer relationships.This study not only confirms the negative effects of father-love absence on adolescents’loneliness,but also explains the mediate roles of individual gratitude and peer relationships.It enriches the theoretical system related to family education and has important theoretical and practical implications for further interventions on adolescents’mental health from the perspective of fatherless parenting.

Floristic composition and edaphic relationships in ferruginous campo rupestre reference ecosystems

Land use change and occupation have led to modifications in the environment causing loss of biodiversity and ecosystem services throughout the planet.Some environments with high economic relevance,such as the ferruginous campo rupestre(rupestrian grassland known as Canga in Brazil),are even more susceptible to severe impacts due to their extreme habitat conditions and low resilience.The determination of reference ecosystems based on the intrinsic characteristics of the ecosystem is essential for conservation as well as to the implementation of ecological restoration.We proposed the reference ecosystem of the three main types of habitats of the ferruginous campo rupestre based on their floristic composition.We described the floristic composition of each habitat and evaluated the physicochemical properties of the soils and the relationship between plants and soils.All three habitats showed high diversity of plant species and many endemic species,such as Chamaecrista choriophylla,Cuphea pseudovaccinium,Lychnophora pinaster,and Vellozia subalata.The distribution of vegetation was strongly related with the edaphic characteristics,with a set of species more adapted to high concentration of base saturation,fine sand,organic carbon,and iron,while another set of species succeeded in more acidic soils with higher S and silt concentration.We provide support for the contention that the ferruginous campo rupestre is a mosaic of different habitats shaped by intrinsic local conditions.Failure to recognize the floristic composition of each particular habitat can lead to inappropriate restoration,increased habitat homogenization and increased loss of biodiversity and ecosystem services.This study also advances the knowledge base for building the reference ecosystem for the different types of ferruginous campo rupestre habitats,as well as a key database for highlighting those species contribute most to community assembly in this diverse and threatened tropical mountain ecosystem.

PCB CT Image Element Segmentation Model Optimizing the Semantic Perception of Connectivity Relationship

Computed Tomography(CT)is a commonly used technology in Printed Circuit Boards(PCB)non-destructive testing,and element segmentation of CT images is a key subsequent step.With the development of deep learning,researchers began to exploit the“pre-training and fine-tuning”training process for multi-element segmentation,reducing the time spent on manual annotation.However,the existing element segmentation model only focuses on the overall accuracy at the pixel level,ignoring whether the element connectivity relationship can be correctly identified.To this end,this paper proposes a PCB CT image element segmentation model optimizing the semantic perception of connectivity relationship(OSPC-seg).The overall training process adopts a“pre-training and fine-tuning”training process.A loss function that optimizes the semantic perception of circuit connectivity relationship(OSPC Loss)is designed from the aspect of alleviating the class imbalance problem and improving the correct connectivity rate.Also,the correct connectivity rate index(CCR)is proposed to evaluate the model’s connectivity relationship recognition capabilities.Experiments show that mIoU and CCR of OSPC-seg on our datasets are 90.1%and 97.0%,improved by 1.5%and 1.6%respectively compared with the baseline model.From visualization results,it can be seen that the segmentation performance of connection positions is significantly improved,which also demonstrates the effectiveness of OSPC-seg.

Different mechanisms underlie similar species-area relationships in two tropical archipelagoes

Despite much research in the field of island biogeography,mechanisms regulating insular diversity remain elusive.Here,we aim to explore mechanisms underlying plant species-area relationships in two tropical archipelagoes in the South China Sea.We found positive plant species-area relationships for both coral and continental archipelagoes.However,our results showed that different mechanisms contributed to similar plant species-area relationships between the two archipelagoes.For coral islands,soil nutrients and spatial distance among communities played major roles in shaping plant community structure and species diversity.By contrast,the direct effect of island area,and to a lesser extent,soil nutrients determined plant species richness on continental islands.Intriguingly,increasing soil nutrients availability(N,P,K)had opposite effects on plant diversity between the two archipelagoes.In summary,the habitat quality effect and dispersal limitation are important for regulating plant diversity on coral islands,whereas the passive sampling effect,and to a lesser extent,the habitat quality effect are important for regulating plant diversity on continental islands.More generally,our findings indicate that island plant species-area relationships are outcomes of the interplay of both niche and neutral processes,but the driving mechanisms behind these relationships depends on the type of islands.

Modern pollen-vegetation relationships along altitudinal vegetation belts in the Leigong Mountain of southwestern China

Understanding the distribution,dispersal,and correlation of modern pollen with vegetation in mountainous regions is essential for establishing accurate modern analogs for fossil pollen records.This study,conducted in Leigong Mountain on the YunnanGuizhou Plateau of southwestern China,involved the collection of 35 surface soil samples from diverse vegetation communities along an elevational gradient ranging from 1210 to 1875 meters.The results reveal a close correspondence between modern pollen assemblages and vegetation zones.Principal Component Analysis(PCA)results indicate that pollen assemblages can effectively distinguish between subtropical montane evergreen broad-leaved forest(SEBF)and subtropical montane deciduous broadleaved forest(SDBF).However,both SEBF and SDBF show significant overlap with subtropical montane evergreen-deciduous broad-leaved mixed forest(SEMF).Detrended Correspondence Analysis(DCA)results clearly distinguish the three vegetation zones,and the first axis of DCA shows a significant positive correlation with elevation(p<0.01,R=0.48).Discriminant Analysis(DA)successfully assigns 94.4%of the modern pollen samples to their respective vegetation zones.Pollen taxa such as Impatiens,Astertype,and Rosaceae exhibit significant indicative capabilities for the SEBF zone,effectively distinguishing this vegetation zone from others.Pinus and Alnus display overrepresentation in the Leigong Mountain region,while Quercus(D,deciduous-type)and Poaceae exhibit high representation in the SEBF zone.In the SEBF zone,both pollen diversity and richness are the lowest.Our study reveals the complex relationship between the richness and diversity of pollen and vegetation.The diversity and richness of tree and shrub pollen are found to be lower than those of the corresponding plants.The pollen-vegetation relationship elucidated in this study serves as a critical reference for reconstructing ancient environments from fossil pollen retrieved in this region.

Relationship between Inter Canine Width and Inter Alar Width, Inter Commissural Width, and Inter Canthal Distance: A Pilot Study

The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and Methods: It was a pilot study included all participants who were aged at least 18 years, without a history of orthodontics treatment from Prosthodontics Department, Faculty of Dental Medicine, University of Kinshasa. The Ethics committee of the National Center of Research for Dental Sciences in DR Congo approved the study protocol (CNRSB 1504.218). The participants medical records were obtained from the interview and dental examination. Nature of the study was explained with participant information sheet, and an informed consent of all participants was obtained. The inclusion criteria were no missing maxillary and mandibular teeth, no diastema, and no anterior restorations, 18 years old before enrollment in the study. The exclusion criteria were inability to meet the above requirements, pregnancy, and refusal to participate in the study. The inter-canine width (ICW), inter alar width (IAW), inter canthal distance (ICaD) and inter-commissural width (ICoW) of each participant were measured with a digital Vernier caliper (Mitutoyo, UK Ltd.,) (0.01 mm) three times and the average value was recorded. The inter canthal distance (ICaD) was measured without applying pressure by bringing the recording parts of the caliper just in contact with the medial angle. The inter alar width (IAW) was marked with a fine marked pencil on the widest outer surface of the alae of the nose on either side or width. Those two points were measured without applying pressure by bringing the recording parts of the caliper just in contact with the outer surface. The participant was told to stop breathing shortly to avoid any change in shape of the nose. The inter-commissural width (ICoW) was determined by measuring the maxillary lip vermilion from commissure to commissure without the application of pressure on the tissue in the relaxed state. The inter-canine width (ICW) was measured indirectly using a dental floss. A dental floss was marked on one end prior to placement in the mouth. Using that point as reference, the dental floss was circumference along the curvature of the anterior dentition such that it passed along the contact point of all the teeth. The distal end of the canine teeth on both sides was then marked on the floss while it was stretched in the patients mouth. Floss was marked on both sides with the marker pencil. The distance between the two proximal contact points was measured and recorded. Data, analysis and validation were performed by the SPSS software (version 22.0, IBM SPSS Statistics, Chicago, IL, USA). Unpaired t-test was used, of Kolmogorov-Smirnov test. Analysis of variance (ANOVA) test was used to test for comparability between socio-demographic characteristics dental measurements. Pearsons correlation coefficients test was calculated to determine the relationship between facial and dental parameters. Significance was set at P 0.01. Results: Of 314 participants enrolled, 202 were included. The age ranged from 18 to 68 years, with a mean age of 40.62 12.99 years. Although the Pearsons correlation coefficients were negative. Ninety-three participants (46%) were men and one hundred and nine (54%) were women. The overall mean age was 40.62 12.99 years. Facial and dental measurements were greater in women than men with significant differences for ICW (p = 0.04). However, no significant difference was seen between men and women for IAW, ICaD and ICoW (p = 0.44, p = 0.23, p = 0.31 respectively). The correlation including Pearsons correlation coefficient and P-values for all participants is not demonstrated. Conclusion: Within the limitations of this study, the results suggest that IAW, ICaD and ICoW cannot be used as a preliminary method for determining the width of the maxillary for anterior teeth for edentulous patients.