Vibrations induced by tunnel boring machine in urban areas: In situ measurements and methodology of analysis

Excavation with tunnel boring machine(TBM)can generate vibrations,causing damages to neighbouring buildings and disturbing the residents or the equipment.This problem is particularly challenging in urban areas,where TBMs are increasingly large in diameter and shallow in depth.In response to this problem,four experimental campaigns were carried out in different geotechnical contexts in France.The vibration measurements were acquired on the surface and inside the TBMs.These measurements are also complemented by few data in the literature.An original methodology of signal processing is pro-posed to characterize the amplitude of the particle velocities,as well as the frequency content of the signals to highlight the most energetic bands.The levels of vibrations are also compared with the thresholds existing in various European regulations concerning the impact on neighbouring structures and the disturbance to local residents.

Measurements of non-equilibrium and equilibrium temperature behind a strong shock wave in simulated martian atmosphere

Non-equilibrium radiation measurements behind strong shock wave for simulated Martian atmosphere are presented in this paper. The shock wave is established in a hydrogen oxygen combustion driven shock tube. Time- resolved spectra of the Av = 0 sequence of the B^2∑^＋ → X^2∑^＋ electronic transition of CN have been observed through optical emission spectroscopy （OES）. A new method, which is based on fitting high resolution spectrum for rotational and vibrational temperatures measurement, is proposed to diag- nose temperature distribution behind the shock wave. It is estimated that the current scheme has the maximum deviation less than 8% （lσ） for vibrational temperature measurement through detailed analysis of the influence of the uncertainties of spectroscopic constants and spectral resolution. Radiation structure of the shock layer, including induction, relaxation and equilibrium process, and corresponding rotational and vibrational temperatures are obtained through time gating OES diagnostics with sub-microsecond temporal resolution. The present extensive results will strongly benefit the reaction rate estimation and computational fluid dynamics （CFD） code validation in high enthalpy Mars reentry chemistry.

MIMO Channel Measurement and Characterization at 6.0-6.4 GHz Under Typical Classroom Environment

An extensive 4 x 4 MIMO channel measurement is carried out at 6. 0-6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered. The results on path loss, delay spread and spatial correlation are presented. The measurement shows that, for corridor coverage, 2x2 MIMO is more economical than 4x4 MIMO due to high correlation. In order to identify the unique characteristics at the high frequency band, the measured channel parameters at 6. 0-6.4 GHz are compared with those at 2. 45 GHz. The comparison shows that the shortened wavelength of this higher frequency band results in a great difference of channel characteristics. Therefore, our measurement results provide new gnidance for the design and development of the system working on 6. 0-6.4 GHz band.

Carrier fringe method of moire interferometry for tiny strain measurements in micro-field

In this paper, we demonstrate a new optical method for tiny strain measurements based on the principle of carrier fringes of moire interferometry. A cross-line grating with frequency of 1200 lp/mm is replicated on the specimen surface, and the strain can be deduced from the changes in carrier fringes before and after the deformation of an object. Four coherent laser beams are used to obtain the carrier fringe patterns of field U and V. Both theoretical analysis and numerical simulation indicate that the ideal accuracy of strain can be controlled within a range of ±1με. Case study of a plane extension experiment shows that the measurement accuracy of strain can be controlled within the range of ±10με. The average strain values of every row of field U and every column of field V can be obtained by using this method, and approximated strain of every pixel in the whole-field can be further acquired, and thus it is possible to measure tiny strains occurred in a micro-field. The technology in this paper can provide comprehensive information for analyzing related mechanical content in the field of MEMS.

Measurement and simulation of the two-phase velocity correlation in sudden-expansion gas-particle flows

In this paper the present authors measured the gas-particle two-phase velocity correlation in sudden expansion gas-particle flows with a phase Doppler particle anemometer （PDPA） and simulated the system behavior by using both a Reynolds-averaged Navier-Stokes （RANS） model and a large-eddy simulation （LES）. The results of the measurements yield the axial and radial time-averaged velocities as well as the fluctuation velocities of gas and three particle-size groups （30μm, 50μm, and 95μm） and the gasparticle velocity correlation for 30μm and 50μm particles. From the measurements, theoretical analysis, and simulation, it is found that the two-phase velocity correlation of sudden-expansion flows, like that of jet flows, is less than the gas and particle Reynolds stresses. What distinguishes the two-phase velocity correlations of sudden-expansion flow from those of jet and channel flows is the absence of a clear relationship between the two-phase velocity correlation and particle size in sudden-expansion flows. The measurements, theoretical analysis, and numerical simulation all lead to the above-stated conclusions. Quantitatively, the results of the LES are better than those of the RANS model.

船载微型Ga-In共晶固定点的现场复现方法研究

将温标固定点技术应用于船载现场是实现温度量值扁平化,提升海洋温度测量水平的重要手段。为了弥补ITS90温标在海洋温区(-5~35℃)范围内固定点数目不足,不能对NTC热敏电阻进行有效校准的缺陷,研制了微型Ga-In共晶固定点,开展了船载控温箱微型Ga-In固定点温坪复现研究,同时探索了环境温度条件下微型Ga-In共晶固定点的复现。采用切线交点法和三次多项式拟合法对微型Ga-In固定点进行了评估和分析。结果表明:微型Ga-In共晶固定点重复性优于1 mK;微型Ga-In共晶固定点应该在固态并低于熔点的环境下保存。采用切线交点法赋值得到微型Ga-In共晶固定点相变温度为15.6549℃,扩展不确定度为1.54 mK(k=2)。

Analysis of Heat Environment Indexes Using Integrated Remote Sensing and Site Measurement Techniques in a Community

Remote sensing and on-site measurement are used to determine the heat environment within a community,and are compared the differences for heat analysis. The two methods perform differently for various underlying surfaces. The individual methods can detect different aspects of the heat environment,which used in combination are useful for heat island research. The differences in estimated air and surface temperatures are smaller in open space and more obvious for vegetated surfaces. Ventilation does not affect the difference between air and surface temperature in open areas,and the vegetation surface and shading moderates surface temperature more effectively than the water surface; The forest is a type of underlying surface with heat comfortable,in which the feeling of air temperature is much difference to the structure of heat environment that should be survey and detected separately. The two methods can be used to study different aspects of the heat environment,thus forming a comprehensive approach for planners in urban and rural spaces.

FCF-LDH/BiVO_(4)with synergistic effect of physical enrichment and chemical adsorption for efficient reduction of nitrate

Photoelectrochemical NO_(3)^(-)reduction(PEC NITRR)not only provides a promising solution for promoting the global nitrogen cycle,but also converts NO_(3)^(-)to the important chemicals(NH_(3)).However,it is still a great challenge to prepare catalysts with excellent NO_(3)^(-)adsorption/activation capacity to achieve high NITRR.Herein,we designed a novel Fe^(2+)~Cu^(2+)Fe^(3+)LDH/BiVO_(4)(FCF-LDH/BVO)catalyst with synergistic effect of chemical adsorption and physical enrichment.Fe^(2+)in FCF-LDH/BVO provides the rich Lewis acid sites for the adsorption of NO_(3)^(-),and the appropriate layer spacing of FCF-LDH further promotes the physical enrichment of NO_(3)^(-)in its interior,thus realizing the effective contact between NO_(3)^(-)and active sites(Fe^(2+)).FCF-LDH/BVO showed excellent NH_(3)production performance(FE_(NH_(3))=66.1%,r_(NH_(3))=13.8μg h^(-1)cm^(-2))and selectivity(FE_(NO_(2)^(-))=2.5%,r_(NO_(2)^(-))=4.9μg h^(-1)cm^(-2))in 0.5 mol L^(-1)Na_(2)SO_(4)electrolyte.In addition,FCF-LDH/BVO maintains the desirable PEC stability for six cycle experiments,showing great potential for practical application.The^(14)NO_(3)^(-)and^(15)NO_(3)^(-)isotope test provides strong evidence for further verification of the origin of N in the generated NH_(3).This LDH catalyst has a great potential in PEC removal of NO_(3)^(-)from groundwater.

The Measurement and Uncertainty Analysis of Antenna Factor of Microwave Antennas Based on Standard Site Method

A method of Standard Site Method (SSM) in the American National Standards Institute’s ANSI C63.5 is described in the frequency ranges from 30 MHz to 1000 MHz. And a measurement system is set up for determining antenna factors (AF) of antennas on an Open Area Test Sites (OATS). AF of antennas including log-periodic antenna and biconical antenna is measured with SSM method by Shanghai Institute of Measurement and Testing Technology (SIMT), which shows good agreement to data measured by National Institute of Metrology (NIM). In the end, it analyzes the measurement uncertainty of SIMT in the 30 MHz to 1000 MHz frequency band and does comparison to that of NIM.

长期服役高桩码头岸坡-结构体系侧向变形实测与数值模拟

长期服役高桩码头的侧向变形会导致桩顶变位,进而影响桩帽与横梁之间的连接,使得码头的工程安全处于危险状态。依托天津港某长期服役码头,开展结构位移和地基深层土体水平位移长期监测,在监测结果的基础上开展数值模拟分析,研究长期服役高桩码头岸坡-结构体系在蠕变影响下土体水平位移、沉降以及桩身水平位移、沉降等相应规律,并且研究岸坡后方不同填土厚度对岸坡-结构体系侧向变形的影响。结果表明,土体蠕变是长期服役高桩码头岸坡-结构体系侧向变形的一个重要影响因素,土体的蠕变变形主要集中于后方堆场沉降和坡面表层淤泥质黏土的竖向位移。岸坡土体的蠕变速率随时间增大而减小。桩身的竖向位移从桩顶到桩底不断减小;码头结构的受力最不利位置处于桩顶附近,各排架桩基在水平位移方面差异明显,越靠内侧越大。随着填土厚度不断增大,岸坡-结构体系侧向变形不断增大。

3-Dimensional Body Measurement Technology

3 - dimensional body measurement technology, the basis of developing high technology in industry, accelerates digital development of aplparel industry. This paper briefly introduces the history of 3 - dimensional body measurement technology, and recounts the principle and primary structure of some types of 3 - dimensional automatic body measurement system. With this understanding, it discusses prospect of 3- dimensional CAD and virtual technology used in apparel industry.

Fundamental Properties and Optimal Gains of a Steady-State Velocity Measured <i>α</i>-<i>β</i>Tracking Filter

This paper clarifies the steady-state properties and performance of an α-β filter for moving target tracking using both position and velocity measurements. We call this filter velocity measured α-β (VM-α-β) filter. We first derive the stability condition and steady-state predicted errors as fundamental properties of the VM-α-β filter. The optimal gains for representative motion models are then derived from the Kalman filter equations. Theoretical and numerical analyses verify that VM-α-β filters with these optimal gains realize more accurate tracking than conventional α-β filters when the filter gains are relatively large. Our study reveals the conditions under which the predicted errors of the VM-α-β filters are less than those of conventional α-β filters. Moreover, numerical simulations clarify that the variance of the tracking error of the VM-α-β filters is approximately 3/4 of that of the conventional α-β filters in realistic situations, even when the accuracy of the position/velocity measurements is the same.

Test of Normality of Waist Measurement Data of Young Male and Female Adults based on the Quantile - Quantile Plot

This paper investigates the normality of some real data set obtained from waist measurements of a group of 49 young adults. The quantile - quantile （Q-Q） plot and the analysis of correlation coefficients for the Q-Q plot is used to determine the normality or otherwise of the data set. In this regards, the probabilities of the quantiles were computed, modified and plotted. Thereafter the correlation coefficients for the quantile - quantile plots were obtained. Results indicate that at 0.1 level of significance, the data for young adult males of the sample were not normally distributed, and had a mean value that is within the range of low risk, healthwise, whereas the distribution of the data for young female adults showed reasonable normality, but also with a mean value that is within the range of low risk in terms of health condition.

A Steady-State Errors Correction Method for Eliminating Measurement Errors

This paper proposes a steady-state errors correction(SSEC)method for eliminating measurement errors.This method is based on the detections of error signal E(s)and output C(s)which generate an expected output R(s).In comparison with the conventional solutions which are based on detecting the expected output R(s)and output C(s)to obtain error signal E(s),the measurement errors are eliminated even the error might be at a significant level.Moreover,it is possible that the individual debugging by regulating the coefficient K for every member of the multiple objectives achieves the optimization of the open loop gain.Therefore,this simple method can be applied to the weak coupling and multiple objectives system,which is usually controlled by complex controller.The principle of eliminating measurement errors is derived analytically,and the advantages comparing with the conventional solutions are depicted.Based on the SSEC method analysis,an application of this method for an active power filter(APF)is investigated and the effectiveness and viability of the scheme are demonstrated through the simulation and experimental verifications.

Deep-sea Pollen Record during 3.0-2.0 Ma B.P. from ODP Site 1143 and Its Response to Global Climate Changes

In order to study vegetation evolution and environmental changes around 2.5 Ma B.P., a total of 146 pollen samples with an average time resolution of 7 000 years were analyzed in the deep-sea record at the depth of 135 - 95 m （in composition depth） from ODP Site 1143 （9° 22＇ N, 113° 17＇ E） in the southern South China Sea. The results show that the pollen influx has a distinct change. During 2.6 - 2.0 Ma B.P., the average value of pollen influx increased evidently compared with that of 3.0 - 2.6 Ma B.P. It shows that the sea level of SCS dropped dramatically around 2.6 Ma B.P., corresponding to the formation of the Northern Hemisphere ice-sheets and the enhancement of the East Asian Monsoon. The pollen influx variations reflect the glacial-interglacial cycles corresponding with the deep-sea oxygen isotope curve and indicate that the sea level of SCS rose and dropped many times after 2.6 Ma B.P. The spectrum analysis results of pollen influx show that there are cycles at 0.1Ma （eccentricity） and 46.9 ka （obliquity） during 3.0 - 2.0 Ma B.P.

Environmental archaeology on Longshan Culture （4500-4000 aBP） at Yuhuicun Site in Bengbu, Anhui Province

Based on the samples collected from the west wall of the ABYT2004 at Yuhuicun Site in Bengbu, Anhui Province, the multi-environmental substitute indexes such as the grain-size, Rb/Sr, zircon crystal morphology and magnetic susceptibility were analyzed. The age of archaeological strata was determined by AMS^14C dating. According to the results, combined with the information of the ancient human activities and the cultural heritage data obtained from the Longshan cultural archaeological strata, it can be concluded that （1） Before 4500 aBP, the climate was humid and water level was high in the Huaihe River and its tributaries, the drainage basin and its surrounding areas were even flooded, so the site area was submerged and there were no human activities around the site. （2） About 4500 aBP, the climate began to become drier and water level of the Huaihe River and its tributaries began to decline, thus floodplain gradually appeared, Yuhuicun Site and Longshan Culture began to appear. （3） Around 4100 aBP, the climate was humid and rainfall was abundant, which resulted in frequent flood disasters in the whole Huaihe River Basin. （4） After 4100 aBP, the climate gradually transited to be cold and dry, agricultural production was constrained to reduce the food source, Yuhuicun Site was almost abandoned. （5） The environmental information in sedimentary strata and historical records based on ancient books agree with each other. In addition, Yuhuicun Site was related to Dayu Zhishui （Yu the Great in taming the floods） in ancient books.

Risk measurement of international oil and gas projects based on the Value at Risk method

International oil and gas projects feature high capital-intensity, high risks and contract diversity. Therefore, in order to help decision makers make more reasonable decisions under uncertainty, it is necessary to measure the risks of international oil and gas projects. For this purpose, this paper constructs a probabilistic model that is based on the traditional economic evaluation model, and introduces value at risk(VaR) which is a valuable risk measure tool in finance, and applies Va R to measure the risks of royalty contracts, production share contracts and service contracts of an international oil and gas project. Besides, this paper compares the influences of different risk factors on the net present value(NPV) of the project by using the simulation results. The results indicate:(1) risks have great impacts on the project's NPV, therefore, if risks are overlooked, the decision may be wrong.(2) A simulation method is applied to simulate the stochastic distribution of risk factors in the probabilistic model. Therefore, the probability is related to the project's NPV, overcoming the inherent limitation of the traditional economic evaluation method.(3) VaR is a straightforward risk measure tool, and can be applied to evaluate the risks of international oil and gas projects. It is helpful for decision making.

Spatial resolved temperature measurement based on absorption spectroscopy using a single tunable diode laser

A novel method based on wavelength-multiplexed line-of-sight absorption and profile fitting for nonuniform flow field measurement is reported. A wavelength scanning combing laser temperature and current modulation WMS scheme is used to implement the wavelength-multi- plexed-profile fitting method. Second harmonic （2f） signal of eight H20 transitions features near 7,170 cm^-1 are measured in one period using a single tunable diode laser. Spatial resolved temperature distribution upon a CH4/air premixed flat flame burner is obtained. The result validates the feasibility of strategy for non-uniform flow field diagnostics by means of WMS-2f TDLAS.

NEW METHOD TO MEASURE PISTON SKIRT DIMENSIONS

The measurement of the middle-convex and varying ellipse profile of a pistonskirt is a key technology because of its complex profile and high precision. Generally, a piston ismeasured on special device after it is machined. High accuracy can be achieved through this off-linemeasurement, but the result diverges from the actual dimension. Therefore, a no-contact in-sitemeasurement system is proposed. A laser displacement meter is used to measure the profile of thepiston skirt. A computer connected to the meter is used to process the measured data. A regressionanalysis method is used to process the ellipse section data. The method of moving average is used toprocess the middle-convex curve data. By using the given system, high measurement accuracy can begained, and the production requirement is met.