Calculation and prediction of divertor detachment via impurity seeding by using one-dimensional model

Achieving the detachment of divertor can help to alleviate excessive heat load and sputtering problems on the target plates,thereby extending the lifetime of divertor components for fusion devices.In order to provide a fast but relatively reliable prediction of plasma parameters along the flux tube for future device design,a one-dimensional(1D)modeling code for the operating point of impurity seeded detached divertor is developed based on Python language,which is a fluid model based on previous work(Plasma Phys.Control.Fusion 58045013(2016)).The experimental observation of the onset of divertor detachment by neon(Ne)and argon(Ar)seeding in EAST is well reproduced by using the 1D modeling code.The comparison between the 1D modeling and two-dimensional(2D)simulation by the SOLPS-ITER code for CFETR detachment operation with Ne and Ar seeding also shows that they are in good agreement.We also predict the radiative power loss and corresponding impurity concentration requirement for achieving divertor detachment via different impurity seeding under high heating power conditions in EAST and CFETR phase II by using the 1D model.Based on the predictions,the optimized parameter space for divertor detachment operation on EAST and CFETR is also determined.Such a simple but reliable 1D model can provide a reasonable parameter input for a detailed and accurate analysis by 2D or three-dimensional(3D)modeling tools through rapid parameter scanning.

A study on the numerical prediction method for the vertical thermal structure in the Bohai Sea and the Huanghai Sea-I.One-dimensional numerical prediction model

In this paper, on the basis of the heat conduction equation without consideration of the advection and turbulence effects, one-dimensional model for describing surface sea temperature ( T1), bottom sea temperature ( Tt ) and the thickness of the upper homogeneous layer ( h ) is developed in terms of the dimensionless temperature θT and depth η and self-simulation function θT - f(η) of vertical temperature profile by means of historical temperature data.The results of trial prediction with our one-dimensional model on T, Th, h , the thickness and gradient of thermocline are satisfactory to some extent.

Reconstructing the upper ocean thermal profiles using one-dimensional numerical model

The observation data for 5 d at a station in the South China Sea is presented. After brief anMysis of the wind speed, air temperature from the ship-borne meteorological instruments and temperature and salinity profiles from the CTD （conductivity, temperature, depth recorder） data, the authors find that the CTD casts are too sparse for us to understand the diurnal evolution of the thermal structure in the upper ocean. A one-dimensional （1D） numericM code based on Mellor-Yamada turbulence closure model is used to reconstruct the upper ocean thermal structure, utilizing the atmospheric forcing data from ship-borne weather station. The simulation results show good agreement with the observational data; the significance of breaking waves is also briefly discussed. The evolution of turbulence kinetic energy （TKE） and the contribution from shear production and buoy- ancy production are discussed respectively. Finally, several possible factors which might influence the numerical results are briefly analyzed.

A Dugdale-Barenblatt model for elliptical orifice problem with asymmetric cracks in one-dimensional orthorhombic quasicrystals

By means of Muskhelishvili’s method and the technique of generalized conformal mapping,the physical plane problems are transformed into regular mathematical problems in quasicrystals(QCs).The analytical solution to an elliptical orifice problem with asymmetric cracks in one-dimensional(1D)orthorhombic QCs is obtained.By using the Dugdale-Barenblatt model,the plastic simulation at the crack tip of the elliptical orifice with asymmetric cracks in 1D orthorhombic QCs is performed.Finally,the size of the atomic cohesive force zone is determined precisely,and the size of the atomic cohesive force zone around the crack tip of an elliptical orifice with a single crack or two symmetric cracks is obtained.

Research on the Application of the Radiative Transfer Model Based on Deep Neural Network in One-dimensional Variational Algorithm

As a typical physical retrieval algorithm for retrieving atmospheric parameters,one-dimensional variational(1 DVAR)algorithm is widely used in various climate and meteorological communities and enjoys an important position in the field of microwave remote sensing.Among algorithm parameters affecting the performance of the 1 DVAR algorithm,the accuracy of the microwave radiative transfer model for calculating the simulated brightness temperature is the fundamental constraint on the retrieval accuracies of the 1 DVAR algorithm for retrieving atmospheric parameters.In this study,a deep neural network(DNN)is used to describe the nonlinear relationship between atmospheric parameters and satellite-based microwave radiometer observations,and a DNN-based radiative transfer model is developed and applied to the 1 DVAR algorithm to carry out retrieval experiments of the atmospheric temperature and humidity profiles.The retrieval results of the temperature and humidity profiles from the Microwave Humidity and Temperature Sounder(MWHTS)onboard the Feng-Yun-3(FY-3)satellite show that the DNN-based radiative transfer model can obtain higher accuracy for simulating MWHTS observations than that of the operational radiative transfer model RTTOV,and also enables the 1 DVAR algorithm to obtain higher retrieval accuracies of the temperature and humidity profiles.In this study,the DNN-based radiative transfer model applied to the 1 DVAR algorithm can fundamentally improve the retrieval accuracies of atmospheric parameters,which may provide important reference for various applied studies in atmospheric sciences.

Simulation of the Influence of Ion-Produced NO_X and HO_X Radicals on the Antarctic Ozone Depletion with a One-Dimensional Model

A one -dimensional time-dependent photochemical model is used to simulate the influence of ion-produced NOx and HOx radicals on the Antarctic ozone depletion in polar night and polar spring at a latitude of 73 degrees south.Vertical transport and nitrogen-oxygen (NOx). hydrogen-oxygen (HOx) production by ionic reactions have been introduced into the model.NOx and HOx produced by precipitating ions are transported into the lower stratosphere by vertical motion and have some effects in the development of the Antarctic ozone depletion.From winter through spring the calculated ozone column decreases to 269.4 DU. However, this value is significantly higher than the total ozone observed at several Antarctic ozone stations.

Entanglement in the Quantum Phase Transition of the Half-Integer Spin One-Dimensional Heisenberg Model

We use the Bethe’s ansatz method to study the entanglement of spinons in the quantum phase transition of half integer spin one-dimensional magnetic chains known as quantum wires. We calculate the entanglement in the limit of the number of particles . We obtain an abrupt change in the entanglement next the quantum phase transition point of the anisotropy parameter ?from the gapped phase ?to gapless phase .

Atmosphere-Ocean Coupling Schemes in a One-Dimensional Climate Model

In this paper, the coupling schemes of atmosphere-ocean climate models are discussed with one-dimensional advection equations. The convergence and stability for synchronous and asynchronous schemes are demonstrated and compared.Conclusions inferred from the analysis are given below. The synchronous scheme as well as the asynchronous-implicit scheme in this model are stable for arbitrary integrating time intervals. The asynchronous explicit scheme is unstable under certain conditions, which depend upon advection velocities and heat exchange parameters in the atmosphere and oceans. With both synchronous and asynchronous stable schemes the discrete solutions converge to their unique exact ones. Advections in the atmosphere and ocean accelerate the rate of convergence of the asynchronous-implicit scheme. It is suggusted that the asynchronous-implicit coupling scheme is a stable and efficient method for most climatic simulations.

A SOLVABLE ONE-DIMENSIONAL ALLOCATION DECISION MODEL OF RENEWABLE RESOURCES

In the paper, the determinate atlecation decision model and the probabilistic allocation decision model of a kind of renewable resource are separatly studied by means of dynamic programming, and the optimal allocation policy is given under some special conditions.

Evolution of Bond-Order-Wave Phase in One-Dimensional Mott Insulators

In this paper, by using the level spectroscopy method and bosonization theory, we discuss the evolution of the bond-order-wave （BOW） phase in a one-dimensional half-filled extended Hubbard model wlth the on-site Coulomb repulsion U as well as the inter-site Coulomb repulsion V and antiferromagnetic exchange J. After clarifying the generic phase diagrams in three limiting cases with one of the parameters being fixed at zero individually, we find that the BOW phase in the U-V phase diagram is initially enlarged as J increases from zero but is eventually suppressed as J increases further in the strong-coupling regime. A three-dimensional phase diagram is suggested where the BOW phase exists in an extended region separated from the spin-density-wave and charge-density-wave phases.

One-dimensional horizontal infiltration experiment for determining permeability coefficient of loamy sand

A knowledge of soil permeability is essential to evaluate hydrologic characteristics of soil, such as water storage and water movement, and soil permeability coefficient is an important parameter that reflects soil permeability. In order to confirm the acceptability of the one-dimensional horizontal infiltration method（one-D method） for simultaneously determining both the saturated and unsaturated permeability coefficients of loamy sand, we first measured the cumulative infiltration and the wetting front distance under various infiltration heads through a series of one-dimensional horizontal infiltration experiments, and then analyzed the relationships of the cumulative horizontal infiltration with the wetting front distance and the square root of infiltration time. We finally compared the permeability results from Gardner model based on the one-D method with the results from other two commonly-used methods（i.e., constant head method and van Genuchten model） to evaluate the acceptability and applicability of the one-D method. The results showed that there was a robust linear relationship between the cumulative horizontal infiltration and the wetting front distance, suggesting that it is more appropriate to take the soil moisture content after infiltration in the entire wetted zone as the average soil moisture content than as the saturated soil moisture content. The results also showed that there was a robust linear relationship between the cumulative horizontal infiltration and the square root of infiltration time, suggesting that the Philip infiltration formula can better reflect the characteristics of cumulative horizontal infiltration under different infiltration heads. The following two facts indicate that it is feasible to use the one-D method for simultaneously determining the saturated and unsaturated permeability coefficients of loamy sand. First, the saturated permeability coefficient（prescribed in the Gardner model） of loamy sand obtained from the one-D method well agreed with the value obtained from the constant head method. Second, the relationship of unsaturated permeability coefficient with soil water suction for loamy sand calculated using Gardner model based on the one-D method was nearly identical with the same relationship calculated using van Genuchten model.

Temperature and current sensitivity extraction of optical superconducting transition-edge sensors based on a two-fluid model

Optical superconducting transition-edge sensor(TES)has been widely used in quantum information,biological imaging,and fluorescence microscopy owing to its high quantum efficiency,low dark count,and photon number resolving capability.The temperature sensitivity(α_(I))and current sensitivity(β_(I))are important parameters for optical TESs,which are generally extracted from the complex impedance.Here we present a method to extractα_(I)andβ_(I)based on a two-fluid model and compare the calculated current-voltage curves,pulse response,and theoretical energy resolution with the measured ones.This method shows qualitative agreement that is suitable for further optimization of optical TESs.

High-order targeted essentially non-oscillatory scheme for two-fluid plasma model

The weakly ionized plasma flows in aerospace are commonly simulated by the single-fluid model,which cannot describe certain nonequilibrium phenomena by finite collisions of particles,decreasing the fidelity of the solution.Based on an alternative formulation of the targeted essentially non-oscillatory(TENO)scheme,a novel high-order numerical scheme is proposed to simulate the two-fluid plasmas problems.The numerical flux is constructed by the TENO interpolation of the solution and its derivatives,instead of being reconstructed from the physical flux.The present scheme is used to solve the two sets of Euler equations coupled with Maxwell's equations.The numerical methods are verified by several classical plasma problems.The results show that compared with the original TENO scheme,the present scheme can suppress the non-physical oscillations and reduce the numerical dissipation.

Anomalous energy diffusion and heat conduction in one-dimensional system

We propose a new concept, the centre of energy, to study energy diffusion and heat conduction in a one-dimensional hard-point model. For the diatom model, we find an anomalous energy diffusion as （x2） - tβ with β = 1.33, which is independent of initial condition and mass rate. The present model can be viewed as the model composed by independent quasi-particles, the centre of energy. In this way, heat current can be calculated. Based on the theory of dynamic billiard, the divergent exponent of heat conductivity is estimated to be α = 0.33, which is confirmed by a simple numerical calculation.

Anisotropic Plane Symmetric Two-Fluid Cosmological Model with Time-Varying G and A

We investigate a two-fluid anisotropic plane symmetric cosmological model with variable gravitational constant G（t） and cosmological term A（t）. In the two-fluid model, one fluid is chosen to be that of the radiation field modeling the cosmic microwave background and the other one a perfect fluid modeling the material content of the universe. Exact solutions of the field equations are obtained by using a special form for the average scale factor which corresponds to a specific time-varying deceleration parameter. The model obtained presents a cosmological scenario which describes an early acceleration and late-time deceleration. The gravitation constant increases with the cosmic time whereas the cosmological term decreases and asymptotically tends to zero. The physical and kinematical behaviors of the associated fluid parameters are discussed.

Theoretical Research on Scattering Resonance States of Reaction I＋HI（v=O）→IH（v＇=0）＋I： Partial Potential Energy Surface and One-dimensional Quantum Reactive Scattering Calculation

Based on the vibrational potential curves coupled with the minimum energy reaction path, the partial potential energy surface of the reaction I＋HI→IH＋I was constructed at the QCISD（T）//MP4SDQ level with pseudo potential method. And the formation mechanism of the scattering resonance states of this reaction was well interpreted with the partial potential energy surface. The scattering resonance states of this reaction should belong to Feshbach resonance because of the coupling of the vibrational mode and the translational mode. With the one-dimensional square potential well model, the resonance width and lifetime of the I＋HI（v=0）→IH（v＇=0）＋I state-to-state reaction were calculated, which preferably explained the high-resolved threshold photodetachment spectroscopy of the IHI- anion performed by Neumark et al..

Numerical Simulation of Countercurrent Flow in a PWR Hot Leg by Using Two-Fluid Model

In order to evaluate CCFL （countercurrent flow limitation） characteristics in a PWR （pressurized water reactor） hot leg under reflux condensation, numerical simulations have been conducted using a 2F （two-fluid） model and a VOF （volume of fluid） method implemented in the CFD （computational fluid dynamics） software, FLUENT6.3.26. The 2F model gave good agreement with CCFL data in low pressure conditions but did not give good results for high pressure steam-water conditions. In the previous study, the computational grid and schemes were improved in the VOF method to improve calculations in circular tubes, and the calculated CCFL characteristics agreed well with the UPTF （Upper Plenum Test Facility） data at 1.5 MPa. In this study, therefore, using the 2F model and the computational grid previously improved for the VOF calculations, numerical simulations were conducted for steam-water flows at 1.5 MPa under PWR full-scale conditions. In the range of medium gas volumetric fluxes, the calculated CCFL characteristics agreed well with the values calculated by the VOF method and the UPTF data at 1.5 MPa. This indicated that the reference set of the interfacial drag correlations employed in this study could be applied not only to low pressures but also to high pressures.

Mathematical models and expert system for grate-kiln process of iron ore oxide pellet production.Part Ⅱ:Rotary kiln process control

Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.

REVIEW ON MATHEMATICAL ANALYSIS OF SOME TWO-PHASE FLOW MODELS

The two-phase flow models are commonly used in industrial applications, such as nuclear, power, chemical-process, oil-and-gas, cryogenics, bio-medical, micro-technology and so on. This is a survey paper on the study of compressible nonconservative two-fluid model, drift-flux model and viscous liquid-gas two-phase flow model. We give the research developments of these three two-phase flow models, respectively. In the last part, we give some open problems about the above models.

Physically based modeling and animation of tornado

Realistic modeling and rendering of dynamic tornado scene is recognized as a challenging task for researchers of computer graphics. In this paper a new physically based method for simulating and animating tornado scene is presented. We first propose a Two-Fluid model based on the physical theory of tornado, then we simulate the flow of tornado and its interaction with surrounding objects such as debris, etc. Taking the scattering and absorption of light by the participating media into account, the illumination effects of the tornado scene can be generated realistically. With the support of graphics hardware, various kinds of dynamic tornado scenes can be rendered at interactive rates.