Stomach One-Point Cancer: One Case Report and Literature Review

IntroductionGastric cancer is one of the most common cancers and one of the most frequent causes of cancer deaths worldwide. Early detection and accurate preoperative staging of gastric cancer is essential for planning optimal therapy such as endoscopic mucosal resection or gastric resection and offers the best prognosis. With advanced technology in diagnostic instruments and the mass screening, early gastric cancer has been detected easier. One-point cancer of gastric is a special type of early gastric cancer. Diagnosis of one-point cancer of gastric is important for both the immediate treatment and the prognosis. There is still no consensus on the operation extent and postoperative treatment for patients with one-point cancer of gastric. Learned from previous reports, we know that existed in the superficial layer of the gastric mucosa and the superficial ulcer is one of the important characteristics of one point cancer of gastric. Herein, we report a case of one point cancer of gastric with the appearance of a deep infiltrating ulcer. To the best of our knowledge, no such type of one point cancer of gastric has been reported.

A Case Report of One-Point Gastric Cancer

Carcinoma of the stomach is the most common malignant tumor in China. Due to advanced endoscopic techniques and equipment, the detection of early gastric carcinoma （EGC） has increased worldwide. Yet gastric one-point cancer is rarely detected.

Prediction of soil–water characteristic curve for Malan loess in Loess Plateau of China

To predict the soil-water characteristic curve(i.e.SWCC)of natural and remoulded Malan loess from soil physical properties,one-point methods for determining the SWCC that are much simpler than experimental methods are proposed.The predicted SWCC is presented in the form of the BRUTSAERT equation,in which the four model parameters can be estimated from soil physical properties using the best correlations obtained in the present study along with one measured data point.The proposed one-point methods are validated using the measured SWCC data reported in the literature.The results of validation studies suggest that the proposed one-point methods can provide reasonable prediction of the SWCC for natural and remoulded Malan loess.The measured data point should be within the transition zone;the measured suction is suggested between25to100kPa for natural loess,while between100to500kPa for remoulded loess.

Novel assays for quality evaluation of XueBiJing:Quality variability of a Chinese herbal injection for sepsis management

XueBiJing is an intravenous five-herb injection used to treat sepsis in China.The study aimed to develop a liquid chromatography-tandem mass spectrometry(LC-MS/MS)-or liquid chromatography-ultraviolet(LC-UV)-based assay for quality evaluation of XueBiJing.Assay development involved identifying marker constituents to make the assay therapeutically relevant and building a reliable one-point calibrator for monitoring the various analytes in parallel.Nine marker constituents from the five herbs were selected based on XueBiJing's chemical composition,pharmacokinetics,and pharmacodynamics.A selectivity test(for“similarity of response”)was developed to identify and minimize interference by nontarget constituents.Then,an intercept test was developed to fulfill“linearity through zero”for each analyte(absolute ratio of intercept to C response,<2%).Using the newly developed assays,we analyzed samples from 33 batches of XueBiJing,manufactured over three years,and found small batch-to-batch variability in contents of the marker constituents(4.1%-14.8%),except for senkyunolide I(26.5%).

Teleconnection Patterns in the Northern Hemisphere Simulated by IAP GCM

Based on monthly mean sea level pressure and 500 hPa height data for a 20-year period simulated by IAP 2L AGCM, teleconnection patterns in the Northern Hemisphere appearing in the model are identified and compared with observations. The results show that almost all of the observed teleconnection patterns in the Northern winter can be reproduced by the model, thus these patterns exist in the atmosphere without any external anomalies. On the other hand, the simulated teleconnection patterns are more dependent on each other than the observed, i.e., they are lack of spatial orthogonality among them, therefore, it is possible that more complex patterns will appear under the action of anomalous external factors. Besides, the simulated teleconnection patterns in summer are greatly different from those in winter, in particular, its scale in summer is much less than that in winter.

TELECONNECTION BETWEEN SEA－SURFACE TEMPERATURE IN TROPICAL EASTERN PACIFIC AND OZONOSPHERE OVER NORTHERN HEMISPHERE

Seasonal interaction between sea-surface temperature (SST) in the tropical eastern Pacific and ozone layer in Northern Hemisphere, ahd the layer,s teleconnection spatial structure caused by SST effeets, for January and July, are statistically analysed. The result indicates that the areas spacially correlated between SST and ozone layer in January greatly differ from the ones in July and they show opposite tendency in the signs of correlation, so do the teleconnection pattern for the ozone lay6r due to effects of SST in different seasons. In addition, persistent' influence of SST on the ozone layer results insuperposition of seasonal SST effects on the layer and makes it characteristic of well-defined wavetrainsin responses to SST. It is concluded that SST in the tropical eastern Pacific is of great importance to thenorthern ozone layer distribution and its seasonal evolution.

The Spirit of the Age in Mathematics and Art： The Eastern and Western Perspective Painting

Both mathematics and art consistently reflect the spirit of the age in which they arise. Consequently, the mathematics in China and in Korea during the Joseon Dynasty, in contrast to the deductive western mathematics, does not function on the basis of proving something deductively. Rather, the Chinese mathematics from this period was based upon making observations about problems by combining patterns with specific examples. In this paper, this author attempts to compare the differences in mathematics between the East and the West, and also to study the different perspectives in art between the East and the West, in order to identify the relationship between civilization, culture and the spirit of the age. This will explain the reason why the Western ＇One Point Perspective＇ had spread in China and the Chosen Dynasty, yet could not be permanently established in these countries.

Robotic compliant assembly for complex-shaped composite aircraft frame based on Gaussian process considering uncertainties

Robots are finding increasing application in aircraft composite structure assembly due to their flexibility and the growing demand of aircraft manufacturers for high production rates.The contact force of the composite frame in a robotic assembly of the aircraft composite fuselage panel can hardly be controlled due to the multi-surface variable contact stiffness caused by compliance and complex shape with multiple mating surfaces.The paper proposes a robotic assembly system for the aircraft composite fuselage frame with a compliant contact force control strategy using the Gaussian process surrogate model.First,a robotic assembly system is introduced,and the global coordinate system transformation model is built.Then,a compliant force control architecture is designed to generate the desired output force.Subsequently,a Gaussian process surrogate model with uncertainties is utilized to model the complicated relationship between the robot’s output force and the normal contact force acting on the mating surface of the composite frame.Furthermore,an optimal contact force control strategy is implemented to improve the contact quality.Finally,an experiment demonstrates that the proposed methodology can ensure that the contact force on each surface is within the limit of the engineering specification and uniformly distributed,improving the quality compared to the traditional assembly process.

Study on frictional behavior of SiC_(f)/SiC composite clad tube clamping condition under nuclear irradiation

Silicon carbide fiber reinforced silicon carbide matrix(SiC_(f)/SiC)composite is the key cladding material of nuclear fuel,which determines the safety and reliability of nuclear fuel storage and transportation.The replacement of its storage and transportation scenario needs to be completed by the manipulator,but the application of SiC_(f)/SiC wear,fracture,and nuclear leakage in the snatching process of brittle-flexible-rigid contact in the irradiation environment has been seriously restricted due to unclear understanding of the damage mechanism.Therefore,the effects of irradiation dose and clamping load on the friction characteristics of the contact interface between SiC_(f)/SiC clad tube are studied in this paper,and the effects of irradiation parameters and clamping force on the static friction coefficient of the contact interface between the clad tube and flexible nitrile are obtained.Based on the Greenwood-Williamson tribological model,a numerical model of the shape and structure of the contact micro-convex at the micro-scale of the clamping interface is constructed by introducing the multi-surface integral,and finally verified by experiments.The research results show that there is a unique“Irradiation suppression zone”under the clamping condition of SiC_(f)/SiC cladding tube under the nuclear irradiation environment,and the growth of static friction coefficient slows down until stagnates after irradiation reaches a certain extent(600 kGy),and there will be a decline when the irradiation dose continues to increase,among which the clamping force of 15.2 N within the irradiation interval of 1,000 kGy can meet the safety of nuclear environment operation.The results of this paper can provide an important theoretical basis and application guidance for the safe operation of SiC_(f)/SiC cladding tubes in the storage and transportation clamping process.

One-point extension and recollement

This paper is devoted to studying the recollement of the categories of finitely generated modules over finite dimensional algebras. We prove that for algebras A, B and C, if A-mod admits a recollement relative to B-mod and C-mod, then A[R]-mod admits a recollement relative to B[S]-mod and C-mod, where A[R]and B[S]are the one-point extensions of A by R and of B by S.

Privacy Preserving Distributed Bandit Residual Feedback Online Optimization Over Time-Varying Unbalanced Graphs

This paper considers the distributed online optimization(DOO) problem over time-varying unbalanced networks, where gradient information is explicitly unknown. To address this issue, a privacy-preserving distributed online one-point residual feedback(OPRF) optimization algorithm is proposed. This algorithm updates decision variables by leveraging one-point residual feedback to estimate the true gradient information. It can achieve the same performance as the two-point feedback scheme while only requiring a single function value query per iteration. Additionally, it effectively eliminates the effect of time-varying unbalanced graphs by dynamically constructing row stochastic matrices. Furthermore, compared to other distributed optimization algorithms that only consider explicitly unknown cost functions, this paper also addresses the issue of privacy information leakage of nodes. Theoretical analysis demonstrate that the method attains sublinear regret while protecting the privacy information of agents. Finally, numerical experiments on distributed collaborative localization problem and federated learning confirm the effectiveness of the algorithm.

SEPARATING TILTING MODULES

Let A be a basic, connected and finite-dimensional algebra over an algebraically closed field k. A tilting module A^T is called separating if the torsion theory (F(A^T), G(A^T)) induced by A^T is splitting in A-mod, i. e. any indecomposable module A^M belongs either to F(A^T) or to G(A^T). In this note we prove the following main result by using the representation theory of representation-infinite hereditary algebra.

An element decomposition method with variance strain stabilization

An element decomposition method with variance strain stabilization(EDM-VSS) is proposed. In the present EDM-VSS, the quadrilateral element is first divided into four sub-triangular cells, and the local strains in sub-triangular cells are obtained using linear interpolation function. For each quadrilateral element, the strain of the whole quadrilateral is the weighted average value of the local strains, which means only one integration point is adopted to construct the stiffness matrix. The stabilization item of the stiffness matrix is constructed by variance of the local strains, which can eliminate the instability of the one-point integration formulation and largely increase the accuracy of the element. Compared with conventional full integration quadrilateral element, the EDM-VSS achieves more accurate results and expends much lower computational cost. More importantly, as no mapping or coordinate transformation is involved in the present EDM-VSS, the restriction on the conventional quadrilateral elements can be removed and problem domain can be discretized in more flexible ways. To verify the accuracy and stability of the present formulation, a number of numerical examples are studied to demonstrate the efficiency of the present EDM-VSS.

Representation theory of Dynkin quivers. Three contributions

The representations of the Dynkin quivers and the corresponding Euclidean quivers are treated in many books. These notes provide three building blocks for dealing with representations of Dynkin （and Euclidean） quivers. They should be helpful as part of a direct approach to study representations of quivers, and they shed some new light on properties of Dynkin and Euclidean quivers.