By making use of the advantages of non-uniform rational B-spline （NURBS） curves to represent spatial curves, an instruction format with double NURBS curves suitable for 5-axis coordinated real-time interpolation is ...By making use of the advantages of non-uniform rational B-spline （NURBS） curves to represent spatial curves, an instruction format with double NURBS curves suitable for 5-axis coordinated real-time interpolation is presented to replace the current 5-axis coordinated linear interpolation method defective in low-speed, low-accuracy and enormous numerical control （NC） files in sculptured surface machining. A generation procedure of the NC files with the presented format is introduced and the method to realize the interpolation in an open computer numerical control （CNC） system is developed by ourselves. These illustrated the feasibility of the proposed method and its capability of avoiding all the shortages of 5-axis linear interpolation method.展开更多
China-made 5-axis simultaneous contouring CNC machine tool and domestically developed industrial computer-aided manufacture （CAM） technology were used for full crown fabrication and measurement of crown accuracy, wi...China-made 5-axis simultaneous contouring CNC machine tool and domestically developed industrial computer-aided manufacture （CAM） technology were used for full crown fabrication and measurement of crown accuracy, with an attempt to establish an open CAM system for dental processing and to promote the introduction of domestic dental computer-aided design （CAD）/CAM system. Commercially available scanning equipment was used to make a basic digital tooth model after preparation of crown, and CAD software that comes with the scanning device was employed to design the crown by using domestic industrial CAM software to process the crown data in order to generate a solid model for machining purpose, and then China-made 5-axis simultaneous contouring CNC machine tool was used to complete machining of the whole crown and the internal accuracy of the crown internal was measured by using 3D-MicroCT. The results showed that China-made 5-axis simultaneous contouring CNC machine tool in combination with domestic industrial CAM technology can be used for crown making and the crown was well positioned in die. The internal accuracy was successfully measured by using 3D-MicroCT. It is concluded that an open CAM system for den-tistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and domestic industrial CAM software has been established, and development of the system will promote the introduction of domestically-produced dental CAD/CAM system.展开更多
As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modul...As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modular architecture controllers （OMAC）. First, the software and hardware platform is chosen and software realization methodology for the CNC system is determined. Second, static modeling methods of an open architecture controller inclusive of object-oriented （OO） programming technology, dynamic link library （DLL） technology and system modules partition are investigated. Third, the dynamical behavioral modeling and the data flow representation of open architecture controller are discussed, which are both described in hierarchy fmite state machine （FSM） model. Fourth, a reusable software module model is established to develop software function module library. Finally, a 3-axis milling machine tool test-bed, named for HIT-CNC, is successfully designed by means of the constructed software function module library and the system configuring method. The experimental results show that, besides increasing the degree of reusability and openness, application of above-mentioned method- ology leads to significant decrease of development time as well as maintenance cost.展开更多
Aiming at the characteristics of modularity and reconfigurable in open architecture computer numerical control （CNC） system, the open architecture CNC system, Harbin Institute of Tech- nology computer numerical cont...Aiming at the characteristics of modularity and reconfigurable in open architecture computer numerical control （CNC） system, the open architecture CNC system, Harbin Institute of Tech- nology computer numerical control （HITCNC）, is researched and manufactured based on the interface standards. The system＇s external interfaces are coincident with the corresponding international standards, and the internal interfaces follow the open modular architecture controller （OMAC） agreement. In the research and manufacturing process, object-oriented technology is used to ensure the openness of the HITCNC, and static programming is applied in the CNC system according to the idea of modularization disassembly. The HITCNC also actualizes real-time and unreal-time modules adopting real-time dynamical linked library （RTDLL） and component object model （COM）. Finite state ma- chine （FSM） is adopted to do dynamically modeling of HITCNC. The complete separation between the software and the hardware is achieved in the HITCNC by applying the SoftSERCANS technique. The application of the above key techniques decreases the programming workload greatly, and uses software programs replacing hardware functions, which offers plenty technique ensures for the openness of HITCNC. Finally, based on the HITCNC, a three-dimensional milling system is established. On the system, series experiments are done to validate the expandability and interchangeability of HITCNC. The results of the experiments show that the established open architecture CNC system HITCNC is correct and feasible, and has good openness.展开更多
A new architecture based on open-architecture CNC of an integrated measuring,modeling and manufacturing system is presented. A 3-axis vertical milling structure is used to achieve the manufacturing function. And a com...A new architecture based on open-architecture CNC of an integrated measuring,modeling and manufacturing system is presented. A 3-axis vertical milling structure is used to achieve the manufacturing function. And a computer vision camera is to be set up on the holder of the milling machine to capture the images of the work-piece and a image data acquisition card is used to translate the image data to the control computer,which acts as the measuring subsystem. Through processing the image data the model of the work-piece is established which plays the role of modeling subsystem. A motion control card is inserted into an industry computer to construct an open CNC system of the type of NC embedded PC which is more sophisticated than other new technologies on open CNC. The embedded motion card burdens the real-time tasks of the system and the IPC does the other management and planning tasks. The IPC together with the motion control card command the three axes of the system to accomplish the manufacturing and measuring functions and further the modeling function.展开更多
文摘By making use of the advantages of non-uniform rational B-spline （NURBS） curves to represent spatial curves, an instruction format with double NURBS curves suitable for 5-axis coordinated real-time interpolation is presented to replace the current 5-axis coordinated linear interpolation method defective in low-speed, low-accuracy and enormous numerical control （NC） files in sculptured surface machining. A generation procedure of the NC files with the presented format is introduced and the method to realize the interpolation in an open computer numerical control （CNC） system is developed by ourselves. These illustrated the feasibility of the proposed method and its capability of avoiding all the shortages of 5-axis linear interpolation method.
基金supported by a grant from the PLA Program for Clinical High-tech Projects for Military Hospitals (No. 2010GXJS053)
文摘China-made 5-axis simultaneous contouring CNC machine tool and domestically developed industrial computer-aided manufacture （CAM） technology were used for full crown fabrication and measurement of crown accuracy, with an attempt to establish an open CAM system for dental processing and to promote the introduction of domestic dental computer-aided design （CAD）/CAM system. Commercially available scanning equipment was used to make a basic digital tooth model after preparation of crown, and CAD software that comes with the scanning device was employed to design the crown by using domestic industrial CAM software to process the crown data in order to generate a solid model for machining purpose, and then China-made 5-axis simultaneous contouring CNC machine tool was used to complete machining of the whole crown and the internal accuracy of the crown internal was measured by using 3D-MicroCT. The results showed that China-made 5-axis simultaneous contouring CNC machine tool in combination with domestic industrial CAM technology can be used for crown making and the crown was well positioned in die. The internal accuracy was successfully measured by using 3D-MicroCT. It is concluded that an open CAM system for den-tistry on the basis of China-made 5-axis simultaneous contouring CNC machine tool and domestic industrial CAM software has been established, and development of the system will promote the introduction of domestically-produced dental CAD/CAM system.
基金Key Development Program of ScienceTechnology of Heilongjiang Province, China (GB05A501)
文摘As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modular architecture controllers （OMAC）. First, the software and hardware platform is chosen and software realization methodology for the CNC system is determined. Second, static modeling methods of an open architecture controller inclusive of object-oriented （OO） programming technology, dynamic link library （DLL） technology and system modules partition are investigated. Third, the dynamical behavioral modeling and the data flow representation of open architecture controller are discussed, which are both described in hierarchy fmite state machine （FSM） model. Fourth, a reusable software module model is established to develop software function module library. Finally, a 3-axis milling machine tool test-bed, named for HIT-CNC, is successfully designed by means of the constructed software function module library and the system configuring method. The experimental results show that, besides increasing the degree of reusability and openness, application of above-mentioned method- ology leads to significant decrease of development time as well as maintenance cost.
基金This project is supported by Provincial Science & Technology Projoct of Heilongjiang, China (No. GB05A501).
文摘Aiming at the characteristics of modularity and reconfigurable in open architecture computer numerical control （CNC） system, the open architecture CNC system, Harbin Institute of Tech- nology computer numerical control （HITCNC）, is researched and manufactured based on the interface standards. The system＇s external interfaces are coincident with the corresponding international standards, and the internal interfaces follow the open modular architecture controller （OMAC） agreement. In the research and manufacturing process, object-oriented technology is used to ensure the openness of the HITCNC, and static programming is applied in the CNC system according to the idea of modularization disassembly. The HITCNC also actualizes real-time and unreal-time modules adopting real-time dynamical linked library （RTDLL） and component object model （COM）. Finite state ma- chine （FSM） is adopted to do dynamically modeling of HITCNC. The complete separation between the software and the hardware is achieved in the HITCNC by applying the SoftSERCANS technique. The application of the above key techniques decreases the programming workload greatly, and uses software programs replacing hardware functions, which offers plenty technique ensures for the openness of HITCNC. Finally, based on the HITCNC, a three-dimensional milling system is established. On the system, series experiments are done to validate the expandability and interchangeability of HITCNC. The results of the experiments show that the established open architecture CNC system HITCNC is correct and feasible, and has good openness.
文摘A new architecture based on open-architecture CNC of an integrated measuring,modeling and manufacturing system is presented. A 3-axis vertical milling structure is used to achieve the manufacturing function. And a computer vision camera is to be set up on the holder of the milling machine to capture the images of the work-piece and a image data acquisition card is used to translate the image data to the control computer,which acts as the measuring subsystem. Through processing the image data the model of the work-piece is established which plays the role of modeling subsystem. A motion control card is inserted into an industry computer to construct an open CNC system of the type of NC embedded PC which is more sophisticated than other new technologies on open CNC. The embedded motion card burdens the real-time tasks of the system and the IPC does the other management and planning tasks. The IPC together with the motion control card command the three axes of the system to accomplish the manufacturing and measuring functions and further the modeling function.
