High-Q silica microdisk optical resonators with large wedge angles on a silicon chip

We experimentally demonstrate high optical quality factor silica microdisk resonators on a silicon chip with large wedge angles by reactive ion etching. For 2-μm-thick microresonators, we have achieved wedge angles of 59°, 63°,70°, and 79° with optical quality factors of 2.4 × 10~7, 8.1 × 10~6, 5.9 × 10~6, and 7.4 × 10~6, respectively, from ～80 μm diameter microresonators in the 1550 nm wavelength band. Also, for 1-μm-thick microresonators, we have obtained an optical quality factor of 7.3 × 10~6 with a wedge angle of 74°.

Tunable optical filter using second-order micro-ring resonator

In this paper, we design and fabricate a silicon integrated optical filter consisting of two cascaded micro-ring resonators and two straight waveguides. Two micro-heaters are fabricated on the top of two micro-rings respectively, which are employed to modulate the micro-rings to perform the function of a tunable optical filter by the thermo–optic effect. The static response test indicates that the extinction ratio and 3-d B bandwidth are 29.01 d B and 0.21 nm respectively, the dynamic response test indicates that the 10%–90% rise and 90%–10% fall time of the filter are 16 μs and 12 μs, respectively,which can meet the requirements of optical communication and information processing. Finally, the power consumption of the device is also characterized, and the total power consumption is about 9.43 m W/nm, which has been improved efficiently.

Classic analogue of Autler–Townes-splitting transparency using a single magneto-optical ring resonator

We show that an optical transparency can be obtained by using only one single magneto-optical ring resonator. This effect is based on the splitting of counterclockwise and clockwise modes in the ring resonator. Within a proposed resonator-waveguide configuration the superposition between the two degeneracy broken modes produces a transparency window,which can be closed, open, and modified by tuning the applied magnetic field. This phenomenon is an analogue of Autler–Townes splitting, and the magnetic field is equivalent to the strong external pump field. We provide a theoretic analysis on the induced transparency, and numerically demonstrate the effect using full-wave simulation. Feasible implication of this effect and its potential applications are also discussed.

Compact Optical Add-Drop De-Multiplexers with Cascaded Micro-Ring Resonators on SOI

A four-channel integrated optical wavelength de-multiplexer is experimentally illustrated on a silicon-on-insulator （SO1） substrate. With the aid of cascaded micro-ring resonators, the whole performance of the wavelength de- multiplexer is improved, such as 3 dB bandwidth and channel crosstalk. Based on the transform matrix theory, a four-channel wavelength de-multiplexer with average channel spacing 4.5±0.5 nm （3 dB bandwidth - 2 ± 0.5 nm） is demonstrated at telecommunication bands. For each channel, the extinction at the adjacent channel is below -39dB and the out-of-band rejection ratio is up to 40dB. The channel dropping loss is below 5dB in the five FSR spectral response periods （near 100 nm）.

Dynamic Free-Spectral-Range Measurement for Fiber Resonator Based on Digital-Heterodyne Optical Phase-Locked Loop

We propose a novel scheme, based on digital-heterodyne optical phase-locked loop with whole-fiber circuit, to dynamically measure the free-spectral-range of a fiber resonator. The optical phase-locked loop is established with a differential frequency-modulation module consists of a pair of acousto-optic modulators. The resonance-tracking loop is derived with the Pound-Drever-Hall technique for locking the heterodyne frequency of the OPLL on the frequency difference between adjacent resonance modes. A stable locking accuracy of about 7 × 10?9 and a dynamic locking accuracy of about 5 × 10?8 are achieved with the FSR of 8.155 MHz, indicating a bias stability of the resonator fiber optic gyro of about 0.1?/h with 10 Hz bandwidth. In addition, the thermal drift coefficient of the FSR is measured as 0.1 Hz/?C. This shows remarkable potential for realizing advanced optical measurement systems, such as the resonant fiber optic gyro, and so on.

Smith-Purcell free electron laser based on the semi-elliptical resonator

A novel Smith-Purcell （S-P） free electron laser composed of an electron gun, a semi-elliptical resonator, a metallic reflecting grating and a collector, is presented for the first time. This paper studies the characteristics of this device by theoretical analysis and particle-in-cell simulation method. Results indicate that tunable coherent S-P radiation with a high output peak power at millimeter wavelengths can be generated by adjusting the length of the grating period, or adjusting the voltage of the electron beam. The present scheme has the following advantages： the semi-elliptical resonator can reflect all radiation with the emission angle {？ and random azimuthal angles, back onto the electron beam with same-phase and causes the electrons to be modulated, so the output power and efficiency are improved.

An Open-Loop Test of a Resonator Fiber Optic Gyro

The resonator fiber optic gyro （R-FOG） ,which utilizes a resonance frequency change due to the Sagnac effect,is a promising candidate for the next generation inertial rotation sensor. In this study, an open-loop R-FOG is set up using phase modulation spectroscopy. First,the demodulation curve is obtained using a lock-in amplifier. From the demodulation signal,a gyro dynamic range of ± 4.2rad/s is obtained. Then,using different phase modulation frequencies,the open-loop gyro output signal is measured when the gyro is rotated clockwise or counterclockwise. The bias drift as a function of time is also measured. The fluctuation of the output over 5s is about 0.02rad/s. The drift can be reduced by taking countermeasures against system noise.

Low noise,continuous-wave single-frequency 1.5-μm laser generated by a singly resonant optical parametric oscillator

We report a low noise continuous-wave （CW） single-frequency 1.5-μm laser source obtained by a singly resonant optical parametric oscillator （SRO） based on periodically poled lithium niobate （PPLN）. The SRO was pumped by a CW single-frequency Nd：YVO4 laser at 1.06μm. The 1.02 W of CW single-frequency signal laser at 1.5 μm was obtained at pump power of 6 W. At the output power of around 0.75 W, the power stability was better than ±l.5% and no mode-hopping was observed in 30 min and frequency stability was better than 8.5 MHz in 1 min. The signal wavelength could be tuned from 1.57 to 1.59 μm by varying the PPLN temperature. The 1.5-μm laser exhibits low noise characteristics, the intensity noise of the laser reaches the shot noise limit （SNL） at an analysis frequency of 4 MHz and the phase noise is less than 1 dB above the SNL at analysis frequencies above 10 MHz.

High-Efficiency Mid-Infrared Picosecond MgO:PPLN Single Resonant Optical Parametric Oscillator

We demonstrate a high-emciency mid-infrared picosecond optical parametric oscillator （OPO） based on MgO doped periodically poled lithium niobate （MgO：PPLN） with a laser diode array （LDA） pumped Innoslab amplifier as the pumping source. Under a 16 W synchronously pumping power, 4.5 W of idler light at 2896nm is obtained. A tuning range of idler light from 2688nm to 3016nm is achieved, within which the highest optical-optical conversion ettlciency from pump power to OPO output is 35.1%. Moreover, a signal light of -500mW from 1644 to 1700nm with a repetition rate of 233.8 MHz is generated.

Refractive Plasmonic Sensor Based on Fano Resonances in an Optical System

A symmetric plasmonie structure consisting of metal-insulator metal waveguide, groove studied, which supports double Fano resonances deriving from two different mechanisms and slot cavities is One of the Fano resonances originates from the interference between the resonances of groove and slot cavities, and the other comes from the interference between slot cavities. The spectral line shapes and the peaks of the double Fano resonances can be modulated by changing the length of the slot cavities and the height of the groove. Furthermore, the wavelength of the resonance peak has a linear relationship with the length of the slot cavities. The proposed plasmonic nanosensor possesses a sensitivity of 800nm/RIU and a figure of merit of 3150, which may have important applications in switches, sensors, and nonlinear devices.

Improvement on the magneto-optical Kerr effect of cobalt film with a quadrilayer structure

The magneto-optical Kerr effect of the HfO2/Co/HfO2/A1 multilayer structure is investigated in this work, and an ob- vious cavity enhancement of the Kerr response for the HfO2 semiconductor is found both theoretically and experimentally. Surprisingly, a maximum value of about -3 of the polar Kerr rotation for s-polarized incident light is observed in our experiment. We propose that this improvement on the Kerr effect can be attributed to the multiple reflection and optical interference in the cavity, which can also be proved by simulation using the finite element method.

Experimental Study on Double Resonance Optical Pumping Spectroscopy in a Ladder-Type System of ^(87)Rb Atoms

Double resonance optical pumping spectroscopy has an outstanding advantage of high signal-to-noise ratio, thus having potential applications in precision measurement. With the counter propagated 780nm and 776nm laser beams acting on a rubidium vapor cell, the high resolution spectrum of 5S1/2 - 5P3/2 - 5D5/2 ladder-type transition of ST Rb atoms is obtained by monitoring the population of the 5S1/2 ground state. The dependence of the spectroscopy lineshape on the probe and coupling fields are comprehensively studied in theory and experiment. This research is helpful for measurement of fundamental physical constants by high resolution spectroscopy.

VIBRATION MEASUREMENT OF DOUBLE-ENDED TUNING FORKS RESONATOR

To enhance the coherence and reliability of the double-ended tuning fork （DETF） resonator, a measurement system of resonator vibration is presented to check its dynamic characteristics. Laser Doppler techniques are utilized and the relation between DETF vibration velocity and output current of photodetector is obtained. Resonator vibration equation is also analyzed and its driving power only depends on the direct current bias voltage and the amplitude of alternative voltage. Furthermore, a special resonator driving control circuit based on measurement is designed. The amplitude and frequency of circuit is controlled by a computer so that highly stable and strong driving signal can be output. Experiments on driving and measuring double-ended tuning fork have been done, The frequency of driving signal is 8 kHz and the peak-to-peak value of driving voltage is 140 V. Experimental results indicate resonator can be drived stably by driving control circuit and dynamic characteristics of DETF may be measured in real time.

Third-Order Nonlinear Optical Response near the Plasmon Resonance Band of Cu2-xSe Nanocrystals

The third-order nonlinear optical properties of water-soluble Cu Se nanocrystals are studied in the near infrared range of 700-980 nm using a femtosecond pulsed laser by the Z-scan technique. It is observed that the nonlinear optical response of Cu Se nanocrystals is sensitively dependent on the excitation wavelength and exhibits the enhanced nonlinearity compared with other selenides such as ZnSe and CdSe. The W-shaped Z-scan trace, a mixture of the reversed saturated absorption and saturated absorption, is observed near the plasmon resonance band of Cu Se nanocrystals, which is attributed to the state-filling of free carriers generated by copper vacancies (self-doping effect) of Cu Se nanocrystals as well as the hot carrier thermal effect upon intense femtosecond laser excitation. The large nonlinear optical response and tunable plasmonic band make Cu Se nanocrystals promising materials for applications in ultra-fast all-optical switching devices as well as nonlinear nanosensors.

Optical pumping nuclear magnetic resonance system rotating in a plane parallel to the quantization axis

A model of an optical pumping nuclear magnetic resonance system rotating in a plane parallel to the quantization axis is presented. Different coordinate frames for nuclear spin polarization vector are introduced, and theoretical calculation is conducted to analyze this model. We demonstrate that when the optical pumping nuclear magnetic resonance system rotates in a plane parallel to the quantization axis, it will maintain a steady state with respect to the quantization axis which is independent of rotational speed and direction.

Vector magnetometry in zero bias magnetic field using nitrogen-vacancy ensembles

The application of the vector magnetometry based on nitrogen-vacancy(NV)ensembles has been widely investigatedin multiple areas.It has the superiority of high sensitivity and high stability in ambient conditions with microscale spatialresolution.However,a bias magnetic field is necessary to fully separate the resonance lines of optically detected magneticresonance(ODMR)spectrum of NV ensembles.This brings disturbances in samples being detected and limits the rangeof application.Here,we demonstrate a method of vector magnetometry in zero bias magnetic field using NV ensembles.By utilizing the anisotropy property of fluorescence excited from NV centers,we analyzed the ODMR spectrum of NVensembles under various polarized angles of excitation laser in zero bias magnetic field with a quantitative numerical modeland reconstructed the magnetic field vector.The minimum magnetic field modulus that can be resolved accurately is downto~0.64 G theoretically depending on the ODMR spectral line width(1.8 MHz),and~2 G experimentally due to noisesin fluorescence signals and errors in calibration.By using 13C purified and low nitrogen concentration diamond combinedwith improving calibration of unknown parameters,the ODMR spectral line width can be further decreased below 0.5 MHz,corresponding to~0.18 G minimum resolvable magnetic field modulus.

3D-Simulations of Transverse Optical Modes of the Free Electron Laser Resonator with Hole Output Coupling

The transverse construction of optical modes in the wiggler is calculated and the numerical simulations of the free-electron laser hole-coupled resonator are carried out.These 3D-simulations include optical amplitude distributions,modes evolvement of optical field and the influence of hole-radius on the distributing of modes.The nu-merical simulations confirm that the fraction of the even-order modes increase in the start-up stage and then decreases in the exponential gain stage.Moreover,it is found that the fundamental mode is dominant in the saturate stage.Based on this observa-tion,we estimate the optical output coupling by using the the fundamental mode.It is found that the numerical results and the first-order estimate are in good agreement for a range of the hole size.

Widely tunable optical parametric oscillator in periodically poled congruently grown lithium tantalite whispering gallery mode resonators

We demonstrate a tunable optical parametric oscillator in a periodically poled congruently grown lithium tantalite whispering gallery mode resonator. The resonator is mechanically polished to millimeter size, and the quality factor is approximately 107 at 1064 nm. Our experiments show that this kind of resonator is capable of reaching a very low threshold and having a wide tuning range. Combined with its narrow resonant linewidth,it is potentially used as a compact, widely tunable, and narrow-linewidth infrared to mid-infrared laser source.

All-optical NRZ-to-AMI conversion using linear filtering effect of silicon microring resonator

We experimentally demonstrate 10-Gb/s format conversion from non-return-to-zero （NRZ） to alternatemark-inversion （AMI） using the linear filtering effect of silicon microring resonator. Our discussion and analysis in simulation further show that a 10-Gb/s AMI signal with good quality can be obtained by a resonator with a notch depth larger than 25 dB when the 3-dB bandwidth is 0.4 nm.

Rectangular optical filter based on high-order silicon microring resonators

The rectangular optical filter is one of the most important optical switching components in the dense wavelength divi- sion multiplexing （DWDM） fiber-optic communication system and the intelligent optical network. The integrated high- order silicon microring resonator （MRR） is one of the best candidates to achieve rectangular filtering spectrum re- sponse. In general, the spectrum response rectangular degree of the single MRR is very low, so it cannot be used in the DWDM system. Using the high-order MRRs, the bandwidth of flat-top pass band, the out-of-band rejection degree and the roll-off coefficient of the edge will be improved obviously. In this paper, a rectangular optical filter based on high- order MRRs with uniform couplers is presented and demonstrated. Using 15 coupled race-track MRRs with 10 pm in radius, the 3 dB flat-top pass band of 2 nm, the out-of-band rejection ratio of 30 dB and the rising and falling edges of 48 dB/nm can be realized successfully.