In nonlinear optical systems,optical solitons have the transmission properties of reducing error rate,improving system security and stability,and have important research significance in future research on all optical ...In nonlinear optical systems,optical solitons have the transmission properties of reducing error rate,improving system security and stability,and have important research significance in future research on all optical communication.This paper uses the bilinear method to obtain the two-soliton solutions of the nonlinear Schrödinger equation.By analyzing the relevant physical parameters in the obtained solutions,the interaction between optical solitons is optimized.The influence of the initial conditions on the interactions of the optical solitons is analyzed in detail,the reason why the interaction of the optical solitons is sensitive to the initial condition is discussed,and the interactions of the optical solitons are effectively weakened.The relevant results are beneficial for reducing the error rate and promoting the communication quality of the system.展开更多
This article describes a novel configuration design for a re-imaging off-axis catadioptric space infrared optical system,and in order to satisfy the signal noise ratio requirements of the system,the stray light of the...This article describes a novel configuration design for a re-imaging off-axis catadioptric space infrared optical system,and in order to satisfy the signal noise ratio requirements of the system,the stray light of the system is necessary to analyze and restrain. The optical system with a focal length of 1 200 mm,an entrance pupil diameter of 600 mm,an F-number of 2,a field of view of 3°× 0. 15°,a working wave band of 8 μm-10 μm,and the image quality of the optical system almost approach to diffraction limits in all field of view.Then the mathematical models of stray light are built,and the suppressive structure is established to eliminate the effect of stray light. Finally,TraceP ro is used to analyze and simulate stray light with and without the suppressive structure,and also get the results of the PST curves. The results indicate that appropriate optical system and suppressive structure can highly reduce the stray light of the space infrared optical system.展开更多
A symmetric plasmonie structure consisting of metal-insulator metal waveguide, groove studied, which supports double Fano resonances deriving from two different mechanisms and slot cavities is One of the Fano resonanc...A symmetric plasmonie structure consisting of metal-insulator metal waveguide, groove studied, which supports double Fano resonances deriving from two different mechanisms and slot cavities is One of the Fano resonances originates from the interference between the resonances of groove and slot cavities, and the other comes from the interference between slot cavities. The spectral line shapes and the peaks of the double Fano resonances can be modulated by changing the length of the slot cavities and the height of the groove. Furthermore, the wavelength of the resonance peak has a linear relationship with the length of the slot cavities. The proposed plasmonic nanosensor possesses a sensitivity of 800nm/RIU and a figure of merit of 3150, which may have important applications in switches, sensors, and nonlinear devices.展开更多
Dialysis hypotension is one of the most prevalence symptoms of dialysis and occurs in 40%of treatment sessions.Detection and prediction of hypotension is important for the well-being of the patient and for optimizing ...Dialysis hypotension is one of the most prevalence symptoms of dialysis and occurs in 40%of treatment sessions.Detection and prediction of hypotension is important for the well-being of the patient and for optimizing treatment.The aim of this study was to construct optical system to monitor blood pressure(BP)continuously and without cuff in hemodialysis based on pulse transit time(PTT)method.To measure the BP changes,dual channel optical system were developed.In this study,individuals were classified into two groups of normal and hemodialysis.In both groups,BP and consequently PTT were earned three times in different positions.After the initial calibration,the regression equation was drawn for each subject.In normal group,each subject was placed in the supine position and BP was measured both by designed system and sphyg-momanometer cuff.During BP measurements,in addition to BP,blood pressure decline was also monitored by optical system.For hemodialysis group,the same measurement setup was adopted.In both groups,the error between cuff method and PTT was calculated.Correlation coefficients for BPcuf vs BP pTT were calculated and Bland-Altman plot was performed for the normal and hemodialysis groups.In this study 16 subjects participated.The results for normal group showed that maximum difference between cuff method and the present method was 14 mmHg and for.dialysis group was 16 mmHg.Bland-A ltman plot in normal group revealed limits of agreement from-13.98 to 13.18 mmHg.Considering hemodialysis group,limits of agreement were from-15.94 to 13.88 mmHg.The correlation coefficient was 0.74 for normal group and was 0.72 for hemodialysis group.The proposed system can monitor BP continuously and diagnose sudden hypotension.So it can be recommended as a useful method to indicate hypotension and can be used for dialysis unit.展开更多
An orthonormal beam family of super Lorentz-Gauss (SLG) beam model is proposed to describe the higher-order mode beams with high divergence, which are generated by a high power diode laser. Here we consider the simp...An orthonormal beam family of super Lorentz-Gauss (SLG) beam model is proposed to describe the higher-order mode beams with high divergence, which are generated by a high power diode laser. Here we consider the simplest case of the SLG beams, where there are four mutually orthogonal SLG beams, namely SLG00, SLG01, SLG10, and SLGll beams. The SLG00 beam is just the Lorentz-Gauss beam. Based on the Collins integral formula and the Hermite-Gaussian expansion of a Lorentz function, an analytical expression for the Wigner distribution function (WDF) of an SLG11 beam through a paraxial ABCD optical system is derived. The properties of the WDF of an SLG11 beam propagating in free space are demonstrated. The normalized WDFs of an SLG11 beam at the different spatial points are depicted in several observation planes. The influence of the beam parameter on the WDF of an SLGI 1 beam in free space is analyzed at different propagation distances. The second-order moments of the WDF of an SLG11 beam in free space are also examined. This research reveals the propagation properties of an SLGll beam from another perspective. The WDFs of SLG01 and SLG10 beams can be easily obtained by using the WDFs of Lorentz-Gauss beam and the SLG11 beam.展开更多
The design of optical instruments is an active subject due to improvement in lens techniques, fabrication technology, and data handling capacity. Much remains to do to expand its application to phytopathology, which w...The design of optical instruments is an active subject due to improvement in lens techniques, fabrication technology, and data handling capacity. Much remains to do to expand its application to phytopathology, which would be in particular quite useful to improve crop growth monitoring in countries like Mali. An optical multimodal system for plant samples has been developed to improve the characterization of leaf disease symptoms, provide information on their effects, and avoid their spread. Potentially inexpensive components (laser, lens, turntables camera and sample, filter, lens, camera and computer) have been selected, assembled and aligned on an optical table into a multimodal system operating in transmission, reflection, diffusion and fluorescence. The illumination and observation angles can be adjusted to optimize viewing conditions in the four modes. This scientific contribution has been an initiation into the design and implementation of an optical instrument. Initial results are shown and will now be extended in cooperation with agronomic laboratories in African countries for tests on specific plant diseases in relation with prevailing climate conditions.展开更多
Backgrounds This paper introduces a polarized catadioptric virtual reality optical system.With a focus on the issue of serious ghost image in the system,root causes are analyzed based on design principles and optical ...Backgrounds This paper introduces a polarized catadioptric virtual reality optical system.With a focus on the issue of serious ghost image in the system,root causes are analyzed based on design principles and optical structure.Methods The distribution of stray light is simulated using Lighttools,and three major ghost paths are selected using the area of the diffuse spot,S d and the energy ratio of the stray light,K as evaluation means.A method to restrain the ghost image through optimization of the structure of the optical system by controlling the focal power of the ghost image path is proposed.Results/Conclusions The results show that the S_(d) for the ghost image path increases by 40%and K decreases by 40%after optimization.Ghost image is effectively suppressed,which provides the theoretical basis and technical support for ghost suppression in a virtual reality optical system.展开更多
In order to realize a high-precision and continuous working function of a star sensor,we propose a new optical system design.Considering the difficulty of the manufacturing process,the entire optical system uses a com...In order to realize a high-precision and continuous working function of a star sensor,we propose a new optical system design.Considering the difficulty of the manufacturing process,the entire optical system uses a complicated Petzval structure.In this paper,the key design elements of the optical system applied for star sensors are presented and the most important performance parameters are given.The ground test results show that the system can maintain excellent detection performance on a near-surface atmospheric platform.This study provides an optical system design scheme for a high-precision and continuous operating star sensor,as well as the theoretical basis for future in-atmosphere and continuous star detection technology.展开更多
The formalism of generalized diffraction integral for paraxial misaligned optical systems is used to investigate the propagation of the Modified Bessel-Gaussian (MBG) beam through a misaligned thin lens. The propertie...The formalism of generalized diffraction integral for paraxial misaligned optical systems is used to investigate the propagation of the Modified Bessel-Gaussian (MBG) beam through a misaligned thin lens. The properties of the propagation of MBG beam traveling through this misaligned ABCD optical system are discussed. A special case of misaligned circular thin lens is illustrated analytically and numerically. The shape of the MBG beam at the exit of the misaligned optical system is unchanged;however the center of the beam is shifted from the propagation axis in correlated manner with the design parameters of the optical system.展开更多
The measurement and control of high temperature play very important roles in national defense,military,scientific experiments,industrial and agricultural production.Photoelectric pyrometer is one of the important radi...The measurement and control of high temperature play very important roles in national defense,military,scientific experiments,industrial and agricultural production.Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement.It has an important application in the field of high temperature measurement,and its performance directly affects the accuracy of temperature measurement.By improving the design of the detection optical system of the photoelectric pyrometer,the imaging performance of the photoelectric pyrometer can be improved effectively,and the temperature measurement accuracy can be improved.In this paper,the temperature measurement principle of photoelectric pyrometer,the wo rking principle of the detection optical system and the composition of the system are introduced.The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed.The optical pyrometer detection optical system is simulated by ZEMAX software,based on the analysis results,the Modulation Transfer Function(MTF)and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system.The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.展开更多
To establish a theoretical basis for providing a better design method of multielement optical systems, we have developed a third-order geometric theory of a plane-symmetric multielement optical system that consists of...To establish a theoretical basis for providing a better design method of multielement optical systems, we have developed a third-order geometric theory of a plane-symmetric multielement optical system that consists of a planar light source, an arbitrary number of ellipsoidal gratings, and an image plane. Analytic formulas of spot diagrams are derived for the system by analytically following a ray-tracing formalism. With these formulas, coma, spherical aberration, and resultant aberration are discussed. To make the theory practical, we determine the aberration coefficients numerically, rather than analytically, with the aid of ray tracing that takes into account the angular distribution of rays originating from a given light source. A merit function is defined so as to represent closely the variance of the spots formed when an infinite number of rays are traced and to take into account the dimensions of the source and the last optical element. The theory is also applicable to mirror-grating or mirror systems.展开更多
This paper analyses the dynamic residual aberrations of a conformal optical system and introduces adaptive optics (AO) correction technology to this system. The image sharpening AO system is chosen as the correction...This paper analyses the dynamic residual aberrations of a conformal optical system and introduces adaptive optics (AO) correction technology to this system. The image sharpening AO system is chosen as the correction scheme.Communication between MATLAB and Code V is established via ActiveX technique in computer simulation.The SPGD algorithm is operated at seven zoom positions to calculate the optimized surface shape of the deformable mirror.After comparison of performance of the corrected system with the baseline system,AO technology is proved to be a good way of correcting the dynamic residual aberration in conformal optical design.展开更多
The ion thruster is an engine with high specific impulse for satellites and spacecrafts,which uses electric energy to boost the spacecraft.The ion optical system,also known as gate assemblies which consist of accelera...The ion thruster is an engine with high specific impulse for satellites and spacecrafts,which uses electric energy to boost the spacecraft.The ion optical system,also known as gate assemblies which consist of acceleration and screen grids,is the key component of the ion thruster.In this paper,the static mechanical properties of the C/C composite grids are evaluated based on the structural design.Representative volume element (RVE) is adopted to simplify the braded composite structure as a continuum material.The dynamical behavior of the 100 mm ion thruster optics in the launch environment (1000g shock-load) is numerically modeled and simulated with the half-sine pulse method.The impact response of the C/C and molybdenum gate assemblies on the stress distribution and deformation is investigated.The simulated results indicate that the magnitudes of the normal displacement of the composite grids subject to the uniformly distributed load are on the same level as molybdenum grids although the normal stiffness of the composite grids is much smaller.When subject to impact loading,the stress distribution in the C/C composite grids is similar to molybdenum grids while the stress magnitude is much smaller.This finding shows that the C/C gate assemblies outperform molybdenum grids and meet the requirement of long lifetime service in space travel.展开更多
In this paper, an exact analytical propagation formula of Finite Olver-Gaussian Beams (FOGBs) passing through a paraxial ABCD optical system is developed and some numerical examples are performed. The propagation prop...In this paper, an exact analytical propagation formula of Finite Olver-Gaussian Beams (FOGBs) passing through a paraxial ABCD optical system is developed and some numerical examples are performed. The propagation properties of the FOGBs through general optical systems characterized by given ABCD matrix are studied on the basis of the generalized Huygens-Fresnel diffraction integral, which permits to show the behavior of this laser beams family and its properties de-pending of the laser parameters. This research is of interest to prove some investigations done in the past by other researchers.展开更多
A conformal optical system refers to the one whose first optical surface conforms to both aerodynamic and imaging requirements. Appropriate correction is required because a conformal dome induces significant aberratio...A conformal optical system refers to the one whose first optical surface conforms to both aerodynamic and imaging requirements. Appropriate correction is required because a conformal dome induces significant aberrations. This paper intends to explain that an effective solution to the easy-fabrication conic surface corrector compensates aberrations induced by a coaxial aspheric dome. A conformal optical system with an ellipsoid MgF2 conformal dome, which has a fineness ratio of 2.0, is designed as an example. The field of regard angle is -4-30 degrees with a +2 degree instantaneous field of view. The system's ultimate value of modulation transfer function is close to the diffraction limit, which indicates that the performance of the conic conformal optical system with a fixed conic corrector meets the imaging requirements.展开更多
The fundamental measurement of space gravitational wave detection is to monitor the relative motion between pairs of freely falling test masses using heterodyne laser interferometry to a precision of 10 pm. The masses...The fundamental measurement of space gravitational wave detection is to monitor the relative motion between pairs of freely falling test masses using heterodyne laser interferometry to a precision of 10 pm. The masses under test are millions of kilometers apart. The inter-spacecraft laser interferometry telescope deliver laser efficiently from one spacecraft to another. It is an important component of the gravitational wave detection observatory. It needs to meet the requirements of large compression ratio, high image quality and extraordinary stray light suppression ability. Based on the primary aberration theory, the method of the large compression ratio off-axis four-mirror optical system design is explored. After optimization, the system has an entrance pupil of 200 mm, compression ratio of 40 times, scientific field of view (FOV) of ±8 μrad. To facilitate suppressing the stray light and delivering the laser beam to the back-end scientific interferometers, the intermediate images and the real exit pupils are spatially available. Over the full FOV, the maximum root mean square (RMS) wavefront error is less than 0.007λ, PV value is less than 0.03λ (λ = 1064 nm). The image quality is approached to the diffraction-limit. The TTL noise caused by the wavefront error of the telescope is analyzed. The TTL noise in the image space of 300 μrad range is less than 1 × 10-10 m whose slope is lower than 0.6 μm/rad, which is under the noise budget of the laser interferometer space antenna (LISA), satisfying the requirements of space gravitational wave detection.展开更多
A tilt-correction adaptive optical system installed on the 430 mm Solar Telescope of Nanjing University has been put in operation. It consists of a tip-tilt mirror, a correlation tracker and an imaging CCD camera. An ...A tilt-correction adaptive optical system installed on the 430 mm Solar Telescope of Nanjing University has been put in operation. It consists of a tip-tilt mirror, a correlation tracker and an imaging CCD camera. An absolute difference algorithm is used for detecting image motion in the correlation tracker. The sampling frequency of the system is 419 Hz. We give a description of the system's configuration, an analysis of its performance and a report of our observational results. A residual jitter of 0.14 arcsec has been achieved. The error rejection bandwidth of the system can be adjusted in the range 5-28 Hz according to the beacon size and the strength of atmospheric turbulence.展开更多
Based on the Collins diffraction formula and by means of the expansion of a hard aperture function into a finite sum of complex Gaussian functions, two analytical approaches of the Finite Olver beams (FOBs) passing th...Based on the Collins diffraction formula and by means of the expansion of a hard aperture function into a finite sum of complex Gaussian functions, two analytical approaches of the Finite Olver beams (FOBs) passing through a paraxial ABCD optical system with a circular annular aperture or a rectangular one are developed in this paper. The propagation properties of the FOBs through an unapertured ABCD optical system or through this last with a circular (or rectangular) aperture or a circular (or rectangular) black screen are deduced, from the main results, as particular cases. Also, the characteristics of Finite ordinary Airy beam passing through the all considered optical systems are derived here that correspond to zeroth-order of the FOBs. According to the predicted formulas, computer simulation examples are given to deepen the understanding of the characteristics of the FOBs passing through some optical systems of annular aperture basis.展开更多
In this paper a simple scheme for optical implementation of human-face recognition with only an incoherent optical correlator is presented. The system uses complementary-encoding hit-or-miss transform method to improv...In this paper a simple scheme for optical implementation of human-face recognition with only an incoherent optical correlator is presented. The system uses complementary-encoding hit-or-miss transform method to improve the performance of the standard correlator. According to this method, a compact optical system for human-face optical recognition is bult up. In the face library 200 photographs are stored and the recognition speed of the system is 10 frames per second. The accuracy of recognition is more than 90 percent. The system has good fault-tolerance ability for the pictures with rotation distortion, Gauss noise disturbance or information losing.展开更多
Non-Hermitian systems have observed numerous novel phenomena and might lead to various applications.Unlike standard quantum physics,the conservation of energy guaranteed by the closed system is broken in the non-Hermi...Non-Hermitian systems have observed numerous novel phenomena and might lead to various applications.Unlike standard quantum physics,the conservation of energy guaranteed by the closed system is broken in the non-Hermitian system,and the energy can be exchanged between the system and the environment.Here we present a scheme for simulating the dissipative phase transition with an open quantum optical system.The competition between the coherent interaction and dissipation leads to the second-order phase transition.Furthermore,the quantum correlation in terms of squeezing is studied around the critical point.Our work may provide a new route to explore the non-Hermitian quantum physics with feasible techniques in experiments.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.11875005).
文摘In nonlinear optical systems,optical solitons have the transmission properties of reducing error rate,improving system security and stability,and have important research significance in future research on all optical communication.This paper uses the bilinear method to obtain the two-soliton solutions of the nonlinear Schrödinger equation.By analyzing the relevant physical parameters in the obtained solutions,the interaction between optical solitons is optimized.The influence of the initial conditions on the interactions of the optical solitons is analyzed in detail,the reason why the interaction of the optical solitons is sensitive to the initial condition is discussed,and the interactions of the optical solitons are effectively weakened.The relevant results are beneficial for reducing the error rate and promoting the communication quality of the system.
基金Sponsored by the National High Technology Research and Development Program of China(Grant No.863-2-5-1-13B)
文摘This article describes a novel configuration design for a re-imaging off-axis catadioptric space infrared optical system,and in order to satisfy the signal noise ratio requirements of the system,the stray light of the system is necessary to analyze and restrain. The optical system with a focal length of 1 200 mm,an entrance pupil diameter of 600 mm,an F-number of 2,a field of view of 3°× 0. 15°,a working wave band of 8 μm-10 μm,and the image quality of the optical system almost approach to diffraction limits in all field of view.Then the mathematical models of stray light are built,and the suppressive structure is established to eliminate the effect of stray light. Finally,TraceP ro is used to analyze and simulate stray light with and without the suppressive structure,and also get the results of the PST curves. The results indicate that appropriate optical system and suppressive structure can highly reduce the stray light of the space infrared optical system.
基金Supported by the Ministry of Science and Technology of China under Grant No 2016YFA0301300the National Natural Science Foundation of China under Grant Nos 11374041 and 11574035the State Key Laboratory of Information Photonics and Optical Communications
文摘A symmetric plasmonie structure consisting of metal-insulator metal waveguide, groove studied, which supports double Fano resonances deriving from two different mechanisms and slot cavities is One of the Fano resonances originates from the interference between the resonances of groove and slot cavities, and the other comes from the interference between slot cavities. The spectral line shapes and the peaks of the double Fano resonances can be modulated by changing the length of the slot cavities and the height of the groove. Furthermore, the wavelength of the resonance peak has a linear relationship with the length of the slot cavities. The proposed plasmonic nanosensor possesses a sensitivity of 800nm/RIU and a figure of merit of 3150, which may have important applications in switches, sensors, and nonlinear devices.
文摘Dialysis hypotension is one of the most prevalence symptoms of dialysis and occurs in 40%of treatment sessions.Detection and prediction of hypotension is important for the well-being of the patient and for optimizing treatment.The aim of this study was to construct optical system to monitor blood pressure(BP)continuously and without cuff in hemodialysis based on pulse transit time(PTT)method.To measure the BP changes,dual channel optical system were developed.In this study,individuals were classified into two groups of normal and hemodialysis.In both groups,BP and consequently PTT were earned three times in different positions.After the initial calibration,the regression equation was drawn for each subject.In normal group,each subject was placed in the supine position and BP was measured both by designed system and sphyg-momanometer cuff.During BP measurements,in addition to BP,blood pressure decline was also monitored by optical system.For hemodialysis group,the same measurement setup was adopted.In both groups,the error between cuff method and PTT was calculated.Correlation coefficients for BPcuf vs BP pTT were calculated and Bland-Altman plot was performed for the normal and hemodialysis groups.In this study 16 subjects participated.The results for normal group showed that maximum difference between cuff method and the present method was 14 mmHg and for.dialysis group was 16 mmHg.Bland-A ltman plot in normal group revealed limits of agreement from-13.98 to 13.18 mmHg.Considering hemodialysis group,limits of agreement were from-15.94 to 13.88 mmHg.The correlation coefficient was 0.74 for normal group and was 0.72 for hemodialysis group.The proposed system can monitor BP continuously and diagnose sudden hypotension.So it can be recommended as a useful method to indicate hypotension and can be used for dialysis unit.
基金Project supported by the National Natural Science Foundation of China (Grant No.10974179)the Natural Science Foundation of Zhejiang Province,China(Grant No.Y1090073)
文摘An orthonormal beam family of super Lorentz-Gauss (SLG) beam model is proposed to describe the higher-order mode beams with high divergence, which are generated by a high power diode laser. Here we consider the simplest case of the SLG beams, where there are four mutually orthogonal SLG beams, namely SLG00, SLG01, SLG10, and SLGll beams. The SLG00 beam is just the Lorentz-Gauss beam. Based on the Collins integral formula and the Hermite-Gaussian expansion of a Lorentz function, an analytical expression for the Wigner distribution function (WDF) of an SLG11 beam through a paraxial ABCD optical system is derived. The properties of the WDF of an SLG11 beam propagating in free space are demonstrated. The normalized WDFs of an SLG11 beam at the different spatial points are depicted in several observation planes. The influence of the beam parameter on the WDF of an SLGI 1 beam in free space is analyzed at different propagation distances. The second-order moments of the WDF of an SLG11 beam in free space are also examined. This research reveals the propagation properties of an SLGll beam from another perspective. The WDFs of SLG01 and SLG10 beams can be easily obtained by using the WDFs of Lorentz-Gauss beam and the SLG11 beam.
文摘The design of optical instruments is an active subject due to improvement in lens techniques, fabrication technology, and data handling capacity. Much remains to do to expand its application to phytopathology, which would be in particular quite useful to improve crop growth monitoring in countries like Mali. An optical multimodal system for plant samples has been developed to improve the characterization of leaf disease symptoms, provide information on their effects, and avoid their spread. Potentially inexpensive components (laser, lens, turntables camera and sample, filter, lens, camera and computer) have been selected, assembled and aligned on an optical table into a multimodal system operating in transmission, reflection, diffusion and fluorescence. The illumination and observation angles can be adjusted to optimize viewing conditions in the four modes. This scientific contribution has been an initiation into the design and implementation of an optical instrument. Initial results are shown and will now be extended in cooperation with agronomic laboratories in African countries for tests on specific plant diseases in relation with prevailing climate conditions.
文摘Backgrounds This paper introduces a polarized catadioptric virtual reality optical system.With a focus on the issue of serious ghost image in the system,root causes are analyzed based on design principles and optical structure.Methods The distribution of stray light is simulated using Lighttools,and three major ghost paths are selected using the area of the diffuse spot,S d and the energy ratio of the stray light,K as evaluation means.A method to restrain the ghost image through optimization of the structure of the optical system by controlling the focal power of the ghost image path is proposed.Results/Conclusions The results show that the S_(d) for the ghost image path increases by 40%and K decreases by 40%after optimization.Ghost image is effectively suppressed,which provides the theoretical basis and technical support for ghost suppression in a virtual reality optical system.
文摘In order to realize a high-precision and continuous working function of a star sensor,we propose a new optical system design.Considering the difficulty of the manufacturing process,the entire optical system uses a complicated Petzval structure.In this paper,the key design elements of the optical system applied for star sensors are presented and the most important performance parameters are given.The ground test results show that the system can maintain excellent detection performance on a near-surface atmospheric platform.This study provides an optical system design scheme for a high-precision and continuous operating star sensor,as well as the theoretical basis for future in-atmosphere and continuous star detection technology.
文摘The formalism of generalized diffraction integral for paraxial misaligned optical systems is used to investigate the propagation of the Modified Bessel-Gaussian (MBG) beam through a misaligned thin lens. The properties of the propagation of MBG beam traveling through this misaligned ABCD optical system are discussed. A special case of misaligned circular thin lens is illustrated analytically and numerically. The shape of the MBG beam at the exit of the misaligned optical system is unchanged;however the center of the beam is shifted from the propagation axis in correlated manner with the design parameters of the optical system.
基金Jilin Province Science and Technology Development Plan Project(20190701024GH)。
文摘The measurement and control of high temperature play very important roles in national defense,military,scientific experiments,industrial and agricultural production.Photoelectric pyrometer is one of the important radiation thermometers for non-contact temperature measurement.It has an important application in the field of high temperature measurement,and its performance directly affects the accuracy of temperature measurement.By improving the design of the detection optical system of the photoelectric pyrometer,the imaging performance of the photoelectric pyrometer can be improved effectively,and the temperature measurement accuracy can be improved.In this paper,the temperature measurement principle of photoelectric pyrometer,the wo rking principle of the detection optical system and the composition of the system are introduced.The optical components that affect the imaging of the optical system of the photoelectric pyrometer are analyzed.The optical pyrometer detection optical system is simulated by ZEMAX software,based on the analysis results,the Modulation Transfer Function(MTF)and the spot Diagram are used as the main evaluation criteria to optimize the design of the objective lens of the photoelectric pyrometer detection optical system.The imaging performance of the photoelectric pyrometer detection optical system and the accuracy of temperature measurement of the photoelectric pyrometer are improved by optimization design of the detection optical system.
文摘To establish a theoretical basis for providing a better design method of multielement optical systems, we have developed a third-order geometric theory of a plane-symmetric multielement optical system that consists of a planar light source, an arbitrary number of ellipsoidal gratings, and an image plane. Analytic formulas of spot diagrams are derived for the system by analytically following a ray-tracing formalism. With these formulas, coma, spherical aberration, and resultant aberration are discussed. To make the theory practical, we determine the aberration coefficients numerically, rather than analytically, with the aid of ray tracing that takes into account the angular distribution of rays originating from a given light source. A merit function is defined so as to represent closely the variance of the spots formed when an infinite number of rays are traced and to take into account the dimensions of the source and the last optical element. The theory is also applicable to mirror-grating or mirror systems.
基金Project supported by the National High Technology Research and Development Program of China (Grant No 2006AA012339)
文摘This paper analyses the dynamic residual aberrations of a conformal optical system and introduces adaptive optics (AO) correction technology to this system. The image sharpening AO system is chosen as the correction scheme.Communication between MATLAB and Code V is established via ActiveX technique in computer simulation.The SPGD algorithm is operated at seven zoom positions to calculate the optimized surface shape of the deformable mirror.After comparison of performance of the corrected system with the baseline system,AO technology is proved to be a good way of correcting the dynamic residual aberration in conformal optical design.
基金Project supported by the National Key R&D Program of China(No.2018YFF01014200)the National Natural Science Foundation of China(Nos.11727804,11672347,and 51732008)
文摘The ion thruster is an engine with high specific impulse for satellites and spacecrafts,which uses electric energy to boost the spacecraft.The ion optical system,also known as gate assemblies which consist of acceleration and screen grids,is the key component of the ion thruster.In this paper,the static mechanical properties of the C/C composite grids are evaluated based on the structural design.Representative volume element (RVE) is adopted to simplify the braded composite structure as a continuum material.The dynamical behavior of the 100 mm ion thruster optics in the launch environment (1000g shock-load) is numerically modeled and simulated with the half-sine pulse method.The impact response of the C/C and molybdenum gate assemblies on the stress distribution and deformation is investigated.The simulated results indicate that the magnitudes of the normal displacement of the composite grids subject to the uniformly distributed load are on the same level as molybdenum grids although the normal stiffness of the composite grids is much smaller.When subject to impact loading,the stress distribution in the C/C composite grids is similar to molybdenum grids while the stress magnitude is much smaller.This finding shows that the C/C gate assemblies outperform molybdenum grids and meet the requirement of long lifetime service in space travel.
文摘In this paper, an exact analytical propagation formula of Finite Olver-Gaussian Beams (FOGBs) passing through a paraxial ABCD optical system is developed and some numerical examples are performed. The propagation properties of the FOGBs through general optical systems characterized by given ABCD matrix are studied on the basis of the generalized Huygens-Fresnel diffraction integral, which permits to show the behavior of this laser beams family and its properties de-pending of the laser parameters. This research is of interest to prove some investigations done in the past by other researchers.
基金Project supported by the Aeronautical Science Foundation of China (Grant No.20060112102)
文摘A conformal optical system refers to the one whose first optical surface conforms to both aerodynamic and imaging requirements. Appropriate correction is required because a conformal dome induces significant aberrations. This paper intends to explain that an effective solution to the easy-fabrication conic surface corrector compensates aberrations induced by a coaxial aspheric dome. A conformal optical system with an ellipsoid MgF2 conformal dome, which has a fineness ratio of 2.0, is designed as an example. The field of regard angle is -4-30 degrees with a +2 degree instantaneous field of view. The system's ultimate value of modulation transfer function is close to the diffraction limit, which indicates that the performance of the conic conformal optical system with a fixed conic corrector meets the imaging requirements.
文摘The fundamental measurement of space gravitational wave detection is to monitor the relative motion between pairs of freely falling test masses using heterodyne laser interferometry to a precision of 10 pm. The masses under test are millions of kilometers apart. The inter-spacecraft laser interferometry telescope deliver laser efficiently from one spacecraft to another. It is an important component of the gravitational wave detection observatory. It needs to meet the requirements of large compression ratio, high image quality and extraordinary stray light suppression ability. Based on the primary aberration theory, the method of the large compression ratio off-axis four-mirror optical system design is explored. After optimization, the system has an entrance pupil of 200 mm, compression ratio of 40 times, scientific field of view (FOV) of ±8 μrad. To facilitate suppressing the stray light and delivering the laser beam to the back-end scientific interferometers, the intermediate images and the real exit pupils are spatially available. Over the full FOV, the maximum root mean square (RMS) wavefront error is less than 0.007λ, PV value is less than 0.03λ (λ = 1064 nm). The image quality is approached to the diffraction-limit. The TTL noise caused by the wavefront error of the telescope is analyzed. The TTL noise in the image space of 300 μrad range is less than 1 × 10-10 m whose slope is lower than 0.6 μm/rad, which is under the noise budget of the laser interferometer space antenna (LISA), satisfying the requirements of space gravitational wave detection.
基金Supported by the National Natural Science Foundation of China
文摘A tilt-correction adaptive optical system installed on the 430 mm Solar Telescope of Nanjing University has been put in operation. It consists of a tip-tilt mirror, a correlation tracker and an imaging CCD camera. An absolute difference algorithm is used for detecting image motion in the correlation tracker. The sampling frequency of the system is 419 Hz. We give a description of the system's configuration, an analysis of its performance and a report of our observational results. A residual jitter of 0.14 arcsec has been achieved. The error rejection bandwidth of the system can be adjusted in the range 5-28 Hz according to the beacon size and the strength of atmospheric turbulence.
文摘Based on the Collins diffraction formula and by means of the expansion of a hard aperture function into a finite sum of complex Gaussian functions, two analytical approaches of the Finite Olver beams (FOBs) passing through a paraxial ABCD optical system with a circular annular aperture or a rectangular one are developed in this paper. The propagation properties of the FOBs through an unapertured ABCD optical system or through this last with a circular (or rectangular) aperture or a circular (or rectangular) black screen are deduced, from the main results, as particular cases. Also, the characteristics of Finite ordinary Airy beam passing through the all considered optical systems are derived here that correspond to zeroth-order of the FOBs. According to the predicted formulas, computer simulation examples are given to deepen the understanding of the characteristics of the FOBs passing through some optical systems of annular aperture basis.
基金Supported by the High Technology Research and Development Programme of ChinaCao Guangbiao High Technology Foundation
文摘In this paper a simple scheme for optical implementation of human-face recognition with only an incoherent optical correlator is presented. The system uses complementary-encoding hit-or-miss transform method to improve the performance of the standard correlator. According to this method, a compact optical system for human-face optical recognition is bult up. In the face library 200 photographs are stored and the recognition speed of the system is 10 frames per second. The accuracy of recognition is more than 90 percent. The system has good fault-tolerance ability for the pictures with rotation distortion, Gauss noise disturbance or information losing.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61925503, 11874038, and 11654002)the Key Project of the National Key R&D Program of China (Grant Nos. 2016YFA0301402 and 2020YFA0309400)+2 种基金the Program for the Innovative Talents of Higher Education Institutions of Shanxithe Program for Sanjin Scholars of Shanxi Provincethe Fund for Shanxi “1331 Project” Key Subjects Construction
文摘Non-Hermitian systems have observed numerous novel phenomena and might lead to various applications.Unlike standard quantum physics,the conservation of energy guaranteed by the closed system is broken in the non-Hermitian system,and the energy can be exchanged between the system and the environment.Here we present a scheme for simulating the dissipative phase transition with an open quantum optical system.The competition between the coherent interaction and dissipation leads to the second-order phase transition.Furthermore,the quantum correlation in terms of squeezing is studied around the critical point.Our work may provide a new route to explore the non-Hermitian quantum physics with feasible techniques in experiments.