In this paper, we proposed a novel method of joint phase noise estimate (JPNE) for PDM-M-QAM (M = 4, 16, 32, 64, …) transmission systems, and established the theoretical model to illustrate the operation mechanism. T...In this paper, we proposed a novel method of joint phase noise estimate (JPNE) for PDM-M-QAM (M = 4, 16, 32, 64, …) transmission systems, and established the theoretical model to illustrate the operation mechanism. The simulation of laser phase noise and fiber nonlinearity compensation based on the proposed JPNE method had also been demonstrated. For 112 Gb/s PDM-4QAM transmission system, the simulation results had showed that the optimum launch power increased from -4 dBm to at least 0 dBm compared with the condition of no phase noise compensation in reach of all simulation distances.展开更多
An excellent separation of xylene isomers is reported using 2, 6-O-di-pentyl-3-O-acetyl-beta-CD as capillary stationary phase. The optimum conditions for the separation are also discussed.
A micromechanics analysis on the possibility of designing a two-phase pseudoelastic composite is made for the case where ductile transformable shape mem- ory alloy plastic particles are imbedded coherently in an elast...A micromechanics analysis on the possibility of designing a two-phase pseudoelastic composite is made for the case where ductile transformable shape mem- ory alloy plastic particles are imbedded coherently in an elastic matrix. It is demon- strated that a pseudoelastic stress-strain loop in a macroscopic loading-unloading cy- cle can be obtained by microscopically stress induced forward and reverse martensitic transformations in the SMA particles. The relation between the macroscopic stress- strain response and the material parameters of the constituents of this composite is quantified through the micromechanics calculations, which reveals that the best duc- tility and thus the greatest energy absorption capacity of this novel microstructure can be obtained by the optimum material design.展开更多
研究表深孔上下差动出流,水股分层分散射流在水垫塘的流动特征和各水股射流之间的干扰碰撞特性。选用非定常不可压缩流动的N-S方程和RNGk-ε紊流模型,采用VOF(Volume of Fluid)法结合溪洛渡双曲拱坝水垫塘对不同间距的多层二元射流进入...研究表深孔上下差动出流,水股分层分散射流在水垫塘的流动特征和各水股射流之间的干扰碰撞特性。选用非定常不可压缩流动的N-S方程和RNGk-ε紊流模型,采用VOF(Volume of Fluid)法结合溪洛渡双曲拱坝水垫塘对不同间距的多层二元射流进入水垫塘后的水流结构进行了数值模拟。通过对时间的迭代,计算和分析了水股间距对水垫塘恒定流场特性的影响,按多股射流入射水垫塘后的流动特征分为四类。给出了水股间距对水垫塘底板的冲击压力的影响规律以及与流场、速度场的关系,发现射流对水垫塘底板的冲击压力特点和速度场的分布特点相对应。研究认为:对于坝身泄洪为分层出流时,在射流入水间距能保证充分发挥上游水股产生的动水垫效应的前提下,应尽量选择较小的射流入水间距,从而减小下游水股对床底的冲击压力。本研究可为水垫塘的优化设计、防护和坝身孔口的合理布局提供参考依据。展开更多
文摘In this paper, we proposed a novel method of joint phase noise estimate (JPNE) for PDM-M-QAM (M = 4, 16, 32, 64, …) transmission systems, and established the theoretical model to illustrate the operation mechanism. The simulation of laser phase noise and fiber nonlinearity compensation based on the proposed JPNE method had also been demonstrated. For 112 Gb/s PDM-4QAM transmission system, the simulation results had showed that the optimum launch power increased from -4 dBm to at least 0 dBm compared with the condition of no phase noise compensation in reach of all simulation distances.
文摘An excellent separation of xylene isomers is reported using 2, 6-O-di-pentyl-3-O-acetyl-beta-CD as capillary stationary phase. The optimum conditions for the separation are also discussed.
文摘A micromechanics analysis on the possibility of designing a two-phase pseudoelastic composite is made for the case where ductile transformable shape mem- ory alloy plastic particles are imbedded coherently in an elastic matrix. It is demon- strated that a pseudoelastic stress-strain loop in a macroscopic loading-unloading cy- cle can be obtained by microscopically stress induced forward and reverse martensitic transformations in the SMA particles. The relation between the macroscopic stress- strain response and the material parameters of the constituents of this composite is quantified through the micromechanics calculations, which reveals that the best duc- tility and thus the greatest energy absorption capacity of this novel microstructure can be obtained by the optimum material design.
文摘研究表深孔上下差动出流,水股分层分散射流在水垫塘的流动特征和各水股射流之间的干扰碰撞特性。选用非定常不可压缩流动的N-S方程和RNGk-ε紊流模型,采用VOF(Volume of Fluid)法结合溪洛渡双曲拱坝水垫塘对不同间距的多层二元射流进入水垫塘后的水流结构进行了数值模拟。通过对时间的迭代,计算和分析了水股间距对水垫塘恒定流场特性的影响,按多股射流入射水垫塘后的流动特征分为四类。给出了水股间距对水垫塘底板的冲击压力的影响规律以及与流场、速度场的关系,发现射流对水垫塘底板的冲击压力特点和速度场的分布特点相对应。研究认为:对于坝身泄洪为分层出流时,在射流入水间距能保证充分发挥上游水股产生的动水垫效应的前提下,应尽量选择较小的射流入水间距,从而减小下游水股对床底的冲击压力。本研究可为水垫塘的优化设计、防护和坝身孔口的合理布局提供参考依据。
