Diagenesis-Mineralization and Ore Prospecting of the Yangla Copper Deposit, Yunnan Province, Southwest China

The large-scale Yangla copper deposit, located in the central part of the Sanjiang Tethys polymetallic belt, is structurally controlled by the Jinsha River Fault and Yangla Fault. This deposit consists of seven ore blocks, including the Beiwu, Nilv, Jiangbian, Linong, Lunong, Tongjige and Jiaren. The Cu metal prospective reserves of the Yangla deposit are above 1 million tons. There are widely distributed Indosinian granodiorite and also many gabbro-diabase dikes and few quartz porphyries exposed in the Yangla ore district. The ore-hosting rocks are diopsode-garnet skarn, sericitie sandy slate and metamorphic quartz sandstone of the first member of the Devonian Linong Formation. Ore bodies occur as layered, stratoid, lenticular and veined shapes, and are strictly controlled by rocks, strata and structures.

Discovery of ferromanganese crust boundary and its genetic and ore prospecting significance

Evidences for the existence of ferromanganese crust boundary were found for the first time during the survey of the “DA YANG YI HAO” Vessel 2003. Some typical characteristics of the boundary are summarized and the significances of the finding of the boundary are included in the genesis discussion. Ore prospecting and assessment of the crust resources are described in this paper. The morphologic and extending characteristics of the crust boundary led to the recognition of two types of crust boundary： interpenetration crust boundary and closed crust boundary. According to the distribution and types of the crust, however, the boundaries are classified into three types： the boundary between ferromanganese crust and detrital sediment, the boundary between tabular crust and seamount nodules, and the boundary between tabular crust and rudaceous crust. This study revealed that the boundary between tabular crust and nodules was not formed under different regional environments but formed under different nucleation potential barriers between different initial growth （nucleation and germination） processes and between solid rocks and loose sediments. The rudaceous crusts are controlled spatially by fracture zones and the crusts＇ boundaries are controlled by the seamount structure and landform. The discovery of the crust boundaries reveals the crust＇s ‘negative growth’ phenomena （especially for some seamount nodules）. The boundary investigation can be helpful in identifying the existence of tabular crust covered by detrital sediments and in calculating the area covered by the crust. The resource calculation error and the resource quality as well as resource exploration degree can be assessed through the survey of crust boundary.

Analysis on Prospecting Potential of Tungsten Polymetallic Ore in Haergeng of Gonghe County, Qinghai Province

The discovery of Gonghe County Haergeng tungsten polymetallic deposit is one of the most important tungsten deposits discovered in Qinghai Province in recent years.It has important theoretical and practicalsignificance.1 Regional geological background The research area lies in the northwest edge of

Classification,Minerogenic Models and Prospecting of Realgar/Orpiment Deposits in China

China's realgar/orpiment deposits may be classified into three types, the stratabound, hot-water sedimentary and hydrothermal, according to their mineralizing processes, geological occurrences, tectonic and geochemical features. The three types may be further distinguished into seven subtypes, namely, the Xiaguan, Shuiluo, Jiepaiyu, Songpan, Shixia, Wangzhuang and Ninghshan ones. On this basis three minerogenic models are established, and based on studies of their geochemistry and minerogenic mechanisms the prerequisites for prospecting for these types of deposits are given in the paper.

Joint Application of Geostatistics and Multifractals for Decision-Making System of Ore Prospection in a Mineral Deposit

The strategy of ore prospection is made on the basis of raw exploratory data which are the products of coupled geological processes and random natural reformation. This decision-making system is extraordinary risky and needs to be supported by various statistical sciences. In this paper, geostatistics and multifractals are jointly employed to delineate the complexity of mineralization and to provide important guidelines for future ore prospecting. The geostatistical analysis indicates the mineralization in granite domain is more homogenous than that in wallrocks, and the exploratory spacing in these two lithological units should be different when taking into consideration the range of variogram. The multifractal analysis shows the spatial variation of mineralization homogeneity. The mineralization in the southwest of this region is much more heterogeneous than that in the granite. The schemes of borehole design are specified based on the combination of abovementioned analytical results. The joint application of geostatistics and multifractal proposed in this study can excavate the exploratory data and output mathematic models in an intuitive and quantitative way, assisting in decision-making and risk avoidance of mining industry.

Research achievements of the Qinghai-Tibet Plateau based on 60 years of aeromagnetic surveys

The Qinghai-Tibet Plateau(also referred to as the Plateau)has long received much attention from the community of geoscience due to its unique geographical location and rich mineral resources.This paper reviews the aeromagnetic surveys in the Plateau in the past 60 years and summarizes relevant research achievements,which mainly include the followings.(1)The boundaries between the Plateau and its surrounding regions have been clarified.In detail,its western boundary is restricted by West Kunlun-Altyn Tagh arc-shaped magnetic anomaly zone forming due to the arc-shaped connection of the Altyn Tagh and Kangxiwa faults and its eastern boundary consists of the boundaries among different magnetic fields along the Longnan(Wudu)-Kangding Fault.Meanwhile,the fault on the northern margin of the Northern Qilian Mountains serves as its northern boundary.(2)The Plateau is mainly composed of four orogens that were stitched together,namely East Kunlun-Qilian,Hoh-Xil-Songpan,Chamdo-Southwestern Sanjiang(Nujiang,Lancang,and Jinsha rivers in southeastern China),and Gangdese-Himalaya orogens.(3)The basement of the Plateau is dominated by weakly magnetic Proterozoic metamorphic rocks and lacks strongly magnetic Archean crystalline basement of stable continents such as the Tarim and Sichuan blocks.Therefore,it exhibits the characteristics of unstable orogenic basement.(4)The Yarlung-Zangbo suture zone forming due to continent-continent collisions since the Cenozoic shows double aeromagnetic anomaly zones.Therefore,it can be inferred that the Yarlung-Zangbo suture zone formed from the Indian Plate subducting towards and colliding with the Eurasian Plate twice.(5)A huge negative aeromagnetic anomaly in nearly SN trending has been discovered in the middle part of the Plateau,indicating a giant deep thermal-tectonic zone.(6)A dual-layer magnetic structure has been revealed in the Plateau.It consists of shallow magnetic anomaly zones in nearly EW and NW trending and deep magnetic anomaly zones in nearly SN trending.They overlap vertically and cross horizontally,showing the flyover-type geological structure of the Plateau.(7)A group of NW-trending faults occur in eastern Tibet,which is intersected rather than connected by the nearly EW trending that develop in middle-west Tibet.(8)As for the central uplift zone that occurs through the Qiangtang Basin,its metamorphic basement tends to gradually descend from west to east,showing the form of steps.The Qiangtang Basin is divided into the northern and southern part by the central uplift zone in it.The basement in the Qiangtang Basin is deep in the north and west and shallow in the south and west.The basement in the northern Qiangtang Basin is deep and relatively stable and thus is more favorable for the generation and preservation of oil and gas.Up to now,19 favorable tectonic regions of oil and gas have been determined in the Qiangtang Basin.(9)A total of 21 prospecting areas of mineral resources have been delineated and thousands of ore-bearing(or mineralization)anomalies have been discovered.Additionally,the formation and uplift mechanism of the Plateau are briefly discussed in this paper.

Geochronology,Petrology and Geochemistry of Xingdi No.3 Mafic-Ultramafic Intrusions in the Northeastern Tarim Craton,NW China

The Xingdi mafic-ultramafic intrusions occur in the northeastern margin of the Tarim craton. The Xingdi No. 3 intrusion is the smallest of four intrusions, with an exposed area of 1.7 km2, and the zircon U-Pb age of the intrusion is 752±4 Ma. The intrusion consists of gabbros, pyroxenites and peridotites, and exhibits a crystallization sequence of the main rock-forming minerals as olivine, orthopyroxene, clinopyroxene and plagioclase. Mineralization occurred at or near the boundaries of the intrusion between pyroxenites and peridotites, and appears as a layered or lenticular shape about 500 m long and 4–15 m wide. The primary sulfides have a relatively simple mineralogy dominated by pyrrhotite-pentlandite-chalcopyrite assemblages, which occur as droplet, star-like and graphic texture and locally sideronitic structures. Geochronological and geochemistry investigations suggest that the Xingdi mafic-ultramafic intrusions and coeval volcanic rock in the Kuluktag area of the Tarim craton formed in an intracontinental breakup environment. Based on the composition of the dominant rockforming minerals and covariant relationships of other oxides versus Mg O, the parental magma of the Xingdi No.3 intrusion belongs to high-Mg tholeiitic basaltic magmas with Mg O of 10.78 wt%. The Xingdi No.3 intrusive rocks are characterized by light REE enrichment relative to heavy REE, negative Nb-Ta anomalies, low 143Nd/144Nd ratios（from 0.511183 to 0.511793） and high initial 87Sr/86Sr ratios（from 0.7051 to 0.7113）. The magma was derived from the enriched-lithospheric mantle and was contaminated during emplacement. According to rock assemblages, mineralization, olivine characteristics, geochemical characteristics and mass balance, there are better copper-nickel ore prospects in the Xingdi No.3 intrusion than in the other three intrusions in the area.