Labile organic carbon (LC) and recalcitrant organic carbon (RC) are two major fractions of soil organic carbon (SOC) and play a critical role in organic carbon turnover and sequestration. The aims of this study ...Labile organic carbon (LC) and recalcitrant organic carbon (RC) are two major fractions of soil organic carbon (SOC) and play a critical role in organic carbon turnover and sequestration. The aims of this study were to evaluate the variations of LC and RC in a semi-arid soil (Inner Mongolia, China) under plastic mulch and drip irrigation after the application of organic materials (OMs), and to explore the effects of OMs from various sources on LC and RC by probing the decomposition characteristics of OMs using in-situ nylon mesh bags burying method. The field experiment included seven treatments, i.e., chicken manure (CM), sheep manure (SM), mushroom residue (MR), maize straw (MS), fodder grass (FG), tree leaves (TL) and no OMs as a control (CK). Soil LC and RC were separated by Huygens D's method (particle size-density), and the average soil mass recovery rate and carbon recovery rate were above 95%, which indicated this method was suitable for carbon pools size analysis. The LC and RC contents significantly (P〈0.01) increased after the application of OMs. Moreover, LC and RC contents were 3.2%-8.6% and 5.0%-9.4% higher in 2016 than in 2015. The applications of CM and SM significantly increased (P〈0,01) LC content and LC/SOC ratio, whereas they were the lowest after the application of TL. However, SOC and RC contents were significantly higher (P〈0.01) after the applications of TL and MS. The correlation analysis indicated the decomposition rate of OMs was positively related with LC content and LC/SOC ratio. In addition, lignin, polyphenol, WOM (total water-soluble organic matter), WHA (water-soluble humic acid), HSL (humicdike substance) and HAL (humic acid-like) contents in initial OMs played important roles in SOC and RC. In-situ nylon mesh bags burying experiment indicated the decomposition rates of CM, SM and MS were significantly higher than those of MR, FG, and TL. Furthermore, MS could result in more lignin derivatives, WHA, and HAL polymers in shorter time during the decomposition process. In conclusion, the application of MS in the semi-arid soil under a long-term plastic mulch and drip irrigation condition could not only improve soil fertility, but also enhance soil carbon sequestration.展开更多
To make recycling utilization of organic materials produced in various agricultural systems, five kinds of organic materials were applied in a field test, including crop straw (CS), biogas residue (BR), mushroom r...To make recycling utilization of organic materials produced in various agricultural systems, five kinds of organic materials were applied in a field test, including crop straw (CS), biogas residue (BR), mushroom residue (MR), wine residue (WR), pig manure (PM), with a mineral fertilizer (CF) and a no-fertilizer (CK) treatment as a control. Our objectives were: i) to quantify the effects of organic materials on soil C and N accumulation; ii) to evaluate the effects of organic materials on soil aggregate stability, along with the total organic carbon (TOC), and N in different aggregate fractions; and iii) to assess the relationships among the organic material components, soil C and N, and C, N in aggregate fractions. The trial was conducted in Wuqiao County, Hebei Province, China. The organic materials were incorporated at an equal rate of C, and combined with a mineral fertilizer in amounts of 150 kg N ha^-1, 26 kg P ha^-1 and 124 kg K ha-1 respectively during each crop season of a wheat-maize rotation system. The inputted C quantity of each organic material treatment was equivalent to the total amount of C contained in the crop straw harvested in CS treatement in the previous season. TOC, N, water-stable aggregates, and aggregate-associated TOC and N were investigated. The results showed that organic material incorporation increased soil aggregation and stabilization. On average, the soil macroaggregate proportion increased by 14%, the microaggregate proportion increased by 3%, and mean-weight diameter (MWD) increased by 20%. TOC content followed the order of PM〉WR〉MR〉BR〉CS〉CK〉CF; N content followed the order WR〉PM〉MR〉BR〉CS〉CF〉CK. No significant correlation was found between TOC, N, and the quality of organic material. Soil silt and clay particles contained the largest part of TOC, whereas the small macroaggregate fraction was the most sensitive to organic materials. Our results indicate that PM and WR exerted better effects on soil C and N accumulation, followed by MR and BR, suggesting that organic materials from ex situ farmland could promote soil quality more as compared to straw returned in situ.展开更多
In order to investigate the adsorption mechanism of trace metals to surficial sediments (SSs), a selective extraction procedure was improved in the present work. The selective extraction procedure has been proved to...In order to investigate the adsorption mechanism of trace metals to surficial sediments (SSs), a selective extraction procedure was improved in the present work. The selective extraction procedure has been proved to selectively remove and separate Fe, Mn oxides and organic materials (OMs) in the non-residual fraction from the SSs collected in Songhua River, China. After screening different kinds of conventional extractants of Fe and Mn oxides and OMs used for separation of heavy metals in the soils and sediments, NH2OH .HCl (0.1 mol/L) + HNO3 (0.1 mol/L), (NH4)2C2O4 (0.2 mol/L) + H2C2O4 (pH 3.0), and 30% of H2O2 were respectively applied to selectively extract Mn oxides, Fe/Mn oxides and OMs. After the extraction treatments, the target components were removed with extraction efficiencies between 86.09%--3.36% for the hydroxylamine hydrochloride treatment, 80.63%- 101.09% for the oxalate solution extraction, and 94.76%-102.83% for the hydrogen peroxide digestion, respectively. The results indicate that this selective extraction technology was effective for the extraction and separation ofFe, Mn oxides and OMs in the SSs, and important for further mechanism study of trace metal adsorption onto SSs.展开更多
The adsorption of Cu(Ⅱ) from aqueous solution onto humic acid (HA) which was isolated from cattle manure (CHA), peat (PHA), and leaf litter (LHA) as a function of contact time, pH, ion strength, and initial...The adsorption of Cu(Ⅱ) from aqueous solution onto humic acid (HA) which was isolated from cattle manure (CHA), peat (PHA), and leaf litter (LHA) as a function of contact time, pH, ion strength, and initial concentration was studied using the batch method. X-ray absorption spectroscopy (XAS) was used to examine the coordination environment of the Cu(ll) adsorbed by HA at a molecular level. Moreover, the chemical compositions of the isolated HA were characterized by elemental analysis and solid-state 13C nuclear magnetic resonance spectroscopy (NMR). The kinetic data showed that the adsorption equilibrium can be achieved within 8 h. The adsorption kinetics followed the pseudo-second-order equation. The adsorption isotherms could be well fitted by the Langmuir model, and the maximum adsorption capacities of Cu(ll) on CHA, PHA, and LHA were 229.4,210.4, and 197.7 mg g-1, respectively. The adsorption of Cu(Ⅱ) on HA increased with the increase in pH from 2 to 7, and maintained a high level at pH〉7. The adsorption of Cu(Ⅱ) was also strongly influenced by the low ionic strength of 0.01 to 0.2 mol L-1 NaNO3, but was weakly influenced by high ionic strength of 0.4 to 1 mol L-1 NaNO3. The Cu(Ⅱ) adsorption on HA may be mainly attributed to ion exchange and surface complexation. XAS results revealed that the binding site and oxidation state of Cu adsorbed on HA surface did not change at the initial Cu(Ⅱ) concentrations of 15 to 40 mg L 1. For all the Cu(Ⅱ) adsorption samples, each Cu atom was surrounded by 40/N atoms at a bond distance of 1.95 A in the first coordination shell. The presence of the higher Cu coordination shells proved that Cu(Ⅱ) was adsorbed via an inner-sphere covalent bond onto the HA surface. Among the three HA samples, the adsorption capacity and affinity of CHA for Cu(Ⅱ) was the greatest, followed by that of PHA and LHA. All the three HA samples exhibited similar types of elemental and functional groups, but different contents of elemental and functional groups. CHA contained larger proportions of methoxyl C, phenolic C and carbonyl C, and smaller proportions of alkyl C and carbohydrate C than PHA and LHA. The structural differences of the three HA samples are responsible for their distinct adsorption capacity and affinity toward Cu(Ⅱ). These results are important to achieve better understanding of the behavior of Cu(Ⅱ) in soil and water bodies in the presence of organic materials.展开更多
Artificial neural network(ANN) and full factorial design assisted atrazine(AT) multiple regression adsorption model(AT-MRAM) were developed to analyze the adsorption capability of the main components in the surf...Artificial neural network(ANN) and full factorial design assisted atrazine(AT) multiple regression adsorption model(AT-MRAM) were developed to analyze the adsorption capability of the main components in the surficial sediments(SSs). Artificial neural network was used to build a model(the determination coefficient square r2 is 0.9977) to describe the process of atrazine adsorption onto SSs, and then to predict responses of the full factorial design. Based on the results of the full factorial design, the interactions of the main components in SSs on AT adsorption were investigated through the analysis of variance(ANOVA), F-test and t-test. The adsorption capability of the main components in SSs for AT was calculated via a multiple regression adsorption model(MRAM). The results show that the greatest contribution to the adsorption of AT on a molar basis was attributed to Fe/Mn(–1.993 μmol/mol). Organic materials(OMs) and Fe oxides in SSs are the important adsorption sites for AT, and the adsorption capabilities are 1.944 and 0.418 μmol/mol, respectively. The interaction among the non-residual components(Fe, Mn oxides and OMs) in SSs interferes in the adsorption of AT that shouldn’t be neglected, revealing the significant contribution of the interaction among non-residual components to controlling the behavior of AT in aquatic environments.展开更多
Knowledge of different effects of various organic materials on soil humic substance is important for both environmental safety and sustainable agriculture.A pot experiment was conducted at Jilin Agricultural Universit...Knowledge of different effects of various organic materials on soil humic substance is important for both environmental safety and sustainable agriculture.A pot experiment was conducted at Jilin Agricultural University,Jilin Province in northeast China to discover the influence of herb residue,animal excrement,woody residue,animal remnant on fulvic acid(FA) composition and structure using differential thermal analysis-thermogravimetric(DTA-TG),fourier transform infrared spectroscopy(FTIR) and elemental analysis.DTA-TG showed the range of peak temperature in the first exothermic reaction increased following the trend: CK〉herb residue〉animal excrement〉woody residue=animal remnant,and the most weight loss was observed in animal excrement.Moreover,the second exothermic reaction of CK-and animal excrement-FA was presented as double peaks,the order of weight loss in that area was animal remnant〉CK〉woody residue〉animal excrement〉herb residue.According to FTIR,herb residue displayed higher adsorption intensity at 2 950,1 420,1 240 and 1 030 cm-1,animal excrement was in reverse.At the same time,herb residue-and animal excrement-FA had an absorption peak at 1 720 cm-1,while other organic materials didn't have this peak.As elemental analysis showed,FA isolated from various treatments was significantly distinct.It was clearly shown from our results that FA composition and structure in amended soils may be affected in different ways and at various extents on dependence of the nature and origin of amendment.展开更多
Opto-thermal transient emission radiometry(OTTER) is a infrared remote sensing technique, which has been successfully used in in vivoskin moisture content and skin moisture depth profiling measurements. In present pap...Opto-thermal transient emission radiometry(OTTER) is a infrared remote sensing technique, which has been successfully used in in vivoskin moisture content and skin moisture depth profiling measurements. In present paper, we extend this moisture content measurement capability to analyze the moisture content of fruit(tomato, grape, etc.) skins, and to study the relationship between fruits ripening process and their surface moisture and moisture depth profiles.展开更多
Soil potentially hazardous metal(PHM)is continually attracting public attention worldwide,due to its highly toxic properties and potentially huge damage to human being through food chain.Phytoremediation is an effecti...Soil potentially hazardous metal(PHM)is continually attracting public attention worldwide,due to its highly toxic properties and potentially huge damage to human being through food chain.Phytoremediation is an effective and eco-friendly way in remediation technology.A pot experiment was carried out to investigate the effect of different organic materials(biogas residue(BR),mushroom residue(MR),and bamboo-shoot shell(BS))application on phytoremediation of two PHM-contaminated soils(Fuyang soil as‘heavily-polluted soil’and Wenzhou soil as‘moderately-polluted soil’,respectively)by Sedum alfrecdii Hance.The results indicated:1)for moderately-polluted soil,the 5%BR treatment had the strongest activation to Cu and Zn,for heavily-polluted soil,1%BS treatment had the highest activation effect for Cu,Zn,Pb and Cd.2)the above-ground biomass of Sedum alfredii Hance increased with the addition rate of organic materials.3)for Cd uptake of Sedum alfredii Hance in moderately-polluted soil,only 1%BS treatment had a better accumulation effect,compared to the control,for Zn element,MR treatments were weaker than the control,while other treatments were better than the control,of which 5%BR,1%BS and 5%BS accumulated more Zn element by 39.6%,32.6%and 23.8%,respectively;in heavily-polluted soil,the treatments of 5%BS,1%BR and 5%BR accumulated more Cd than the control by 12.9%,12.8%and 6.2%,respectively,the treatments with organic materials addition promoted Zn accumulation in shoots of Sedum alfredii Hance,and the best treatment was 5%BS.Therefore,an appropriate application rate of BS and BR could improve the remediation efficiency for Zn/Cd contaminated soils by Sedum alfredii Hance.展开更多
Heavy metal pollution and remediation of soils have drawn much attention. More and more scholars tend to remediate soil heavy metals without affecting the normal agricultural production. By analyzing the mechanism of ...Heavy metal pollution and remediation of soils have drawn much attention. More and more scholars tend to remediate soil heavy metals without affecting the normal agricultural production. By analyzing the mechanism of action of organic materials to remediate Pb pollution in soil,the effect of different organic materials on the passivation of available Pb in soil was summarized,and the prospect was proposed for the future application of organic materials,in order to provide reference for the remediation of Pb and other heavy metals by organic materials.展开更多
Porous organic molecular materials(POMMs)are an emergent class of molecular-based materials characterized by the formation of extended porous frameworks,mainly held by non-covalent interactions.POMMs represent a varie...Porous organic molecular materials(POMMs)are an emergent class of molecular-based materials characterized by the formation of extended porous frameworks,mainly held by non-covalent interactions.POMMs represent a variety of chemical families,such as hydrogen-bonded organic frameworks,porous organic salts,porous organic cages,C-H···πmicroporous crystals,supramolecular organic frameworks,π-organic frameworks,halogen-bonded organic framework,and intrinsically porous molecular materials.In some porous materials such as zeolites and metal organic frameworks,the integration of multiscale has been adopted to build materials with multifunctionality and optimized properties.Therefore,considering the significant role of hierarchy in porous materials and the growing importance of POMMs in the realm of synthetic porous materials,we consider it appropriate to dedicate for the first time a critical review covering both topics.Herein,we will provide a summary of literature examples showcasing hierarchical POMMs,with a focus on their main synthetic approaches,applications,and the advantages brought forth by introducing hierarchy.展开更多
Organic contaminants have posed a direct and substantial risk to human wellness and the environment.In recent years,piezo-electric catalysis has evolved as a novel and effective method for decomposing these contaminan...Organic contaminants have posed a direct and substantial risk to human wellness and the environment.In recent years,piezo-electric catalysis has evolved as a novel and effective method for decomposing these contaminants.Although piezoelectric materials offer a wide range of options,most related studies thus far have focused on inorganic materials and have paid little attention to organic materi-als.Organic materials have advantages,such as being lightweight,inexpensive,and easy to process,over inorganic materials.Therefore,this paper provides a comprehensive review of the progress made in the research on piezoelectric catalysis using organic materials,high-lighting their catalytic efficiency in addressing various pollutants.In addition,the applications of organic materials in piezoelectric cata-lysis for water decomposition to produce hydrogen,disinfect bacteria,treat tumors,and reduce carbon dioxide are presented.Finally,fu-ture developmental trends regarding the piezoelectric catalytic potential of organic materials are explored.展开更多
The purpose of this paper is to present the results of investigations on quasi-one-dimensional organic crystals of tetrathiotetracene-tetracyanoquinodi- methane (TTT(TCNQ)<sub>2</sub>) from the prospective...The purpose of this paper is to present the results of investigations on quasi-one-dimensional organic crystals of tetrathiotetracene-tetracyanoquinodi- methane (TTT(TCNQ)<sub>2</sub>) from the prospective of thermoelectric applications. The calculations were performed after analytical expressions, obtained in the frame of a physical model, more detailed than the model presented earlier by authors. The main Hamiltonian of the model includes the electronic and phonon part, electron-phonon interactions and the impurity scattering term. In order to estimate the electric charge transport between the molecular chains, the physical model was upgraded to the so-called three-dimen- sional (3D) physical model. Numeric computations were performed to determine the electrical conductivity, Seebeck coefficient, thermal conductivity, thermoelectric power factor and thermoelectric figure-of-merit as a function on charge carrier concentrations, temperatures and impurity concentrations. A detailed analysis of charge-lattice interaction, consisting of the exploration of the Peierls structural transition in TCNQ molecular chains of TTT(TCNQ)<sub>2</sub> was performed. As result, the critical transition temperature was determined. The dispersion of renormalized phonons was examined in detail.展开更多
Rechargeable magnesium-ion batteries(MIBs) are favorable substitutes for conventional lithium-ion batteries(LIBs) because of abundant magnesium reserves, a high theoretical energy density, and great inherent safety. O...Rechargeable magnesium-ion batteries(MIBs) are favorable substitutes for conventional lithium-ion batteries(LIBs) because of abundant magnesium reserves, a high theoretical energy density, and great inherent safety. Organic electrode materials with excellent structural tunability,unique coordination reaction mechanisms, and environmental friendliness offer great potential to promote the electrochemical performance of MIBs. However, research on organic magnesium battery cathode materials is still preliminary with many significant challenges to be resolved including low electrical conductivity and unwanted but severe dissolution in useful electrolytes. Herein, we provide a detailed overview of reported organic cathode materials for MIBs. We begin with basic properties such as charge storage mechanisms(e.g., n-, p-, and bipolartype), moving to recent advances in various types of organic cathodes including carbonyl-, nitrogen-, and sulfur-based materials. To shed light on the diverse strategies targeting high-performance Mg-organic batteries, elaborate summaries of various approaches are presented.Generally, these strategies include molecular design, polymerization, mixing with carbon, nanosizing and electrolyte/separator optimization.This review provides insights on exploring high-performance organic cathodes in rechargeable MIBs.展开更多
Organic electrode materials(OEMs),withmerits of structural diversity,molecular-level controllability,resource abundance,and environmental friendliness,have become a promising electrode candidate for low-carbon renewab...Organic electrode materials(OEMs),withmerits of structural diversity,molecular-level controllability,resource abundance,and environmental friendliness,have become a promising electrode candidate for low-carbon renewable batteries.Safer,environmentally benign,and sustainable aqueous rechargeable batteries are particularly appealing for large-scale energy storage applications.This review aims to provide an insightful discussion of OEMs in nonmetallic charge carrier-based batteries,especially for the application in aqueous rechargeable systems.The emerging application of OEMs in versatile aqueous batteries will be analyzed emphatically,including aqueous proton batteries,aqueous ammonium-ion batteries,and air self-charging batteries.We expect that this review can serve as a guide for the future development of OEMs in nonmetallic charge carrier-based batteries and provide inspiration for unmet challenges.展开更多
Design and preparation of organic materials having the ability to automatically restore their mechanical and physical properties are of great importance because of the extensive application ranging from aerospace comp...Design and preparation of organic materials having the ability to automatically restore their mechanical and physical properties are of great importance because of the extensive application ranging from aerospace components to microcircuitry, where the accessibility is highly limited and the reparability of materials is lower. The self-healing behavior is actually a dy- namic property of material, resembling what is possessed by nature living systems. Therefore, fabrication of most self-healing materials is actually inspired by nature. This tutorial review focuses on the basic chemical mechanisms that have been suc- cessfully adopted in designing self-healing organic materials. It specially covers recent development in the design of materials with durable, easy repairable or self-healing superhydrophobic surfaces and coatings.展开更多
A 180-day incubation experiment was con- ducted to investigate the effect of different organic materials on the chemical properties of coastal soil with high salinity and relatively low pH. Four organic materials (th...A 180-day incubation experiment was con- ducted to investigate the effect of different organic materials on the chemical properties of coastal soil with high salinity and relatively low pH. Four organic materials (three kinds of plant residues: straw, composted straw, and fresh reed; and one kind of poultry manure: chicken manure) were applied at a ratio of 15 g·kg^-1 to samples of costal saline soil from the Yellow River Delta of China. The results showed that the soil pH and exchangeable sodium percentage (ESP) decreased, whereas soil cation exchangeable capacity (CEC) and macronutrient concen- trations increased, regardless of the type of organic material used. All treatments showed a remarkable increase in soil soluble organic carbon (SOC) during the 180-day incubation. The peak values of SOC in descend- ing order were chicken manure, reed, composted straw, straw, and control soil. At the end of incubation, the highest level of SOC occurred in the straw-amended soil, followed by composted straw, reed, and chicken manure- amended soils. Soil respiration rate and available nitrogen were significantly influenced by the type of material used. Although reed-amended soil had a relatively high SOC and respiration rate, the ESP was reduced the least. Consider- ing the possible risk of heavy metals caused by chicken manure, it is proposed that straw and composted straw are the more efficient materials to use for reclaiming costal saline soil and improving the availability of macronu- trients.展开更多
Redox flow batteries (RFBs) have great potentials in the future applications of both large scale energy storage and powering the electrical vehicle. Critical challenges including low volumetric energy density. high ...Redox flow batteries (RFBs) have great potentials in the future applications of both large scale energy storage and powering the electrical vehicle. Critical challenges including low volumetric energy density. high cost and maintenance greatly impede the wide application of conventional RFBs based on inorganic materials. Redox-active organic molecules have shown promising prospect in the application of RFBs, benefited from their low cost, vast abundance, and high tunability of both potential and solubility. In this review, we discuss the advantages of redo~ active organic materials over their inorganic compart and the recent progress of organic based aqueous and non-aqueous RFBs. Design considerations in active materi- als, choice of electrolytes and membrane selection in both aqueous and non-aqueous RFBs are discussed. Finally. we discuss remaining critical challenges and suggest future directions for improving organic based RFBs.展开更多
With the increasing demand for large-scale battery systems in electric vehicles(EVs) and smart renewable energy grids, organic materials including small molecules and polymers utilized as electrodes in rechargeable ...With the increasing demand for large-scale battery systems in electric vehicles(EVs) and smart renewable energy grids, organic materials including small molecules and polymers utilized as electrodes in rechargeable batteries have received increasing attraction. In recent years, two-dimensional(2D) organic materials possessing planar layered architecture exhibit optional chemical modification, high specific surface area as well as unique electrical/magnetic properties, which have been emerging as the promising functional materials for wide applications in optoelectronics, catalysis, sensing, etc. Integrating with high-density redox-active sites and hierarchical porous structure, significant achievements in 2D organic materials as cathode materials for alkali-metal-ion batteries have been witnessed. In this review, the recent progress in synthetic approaches, structure analyses, electrochemical characterizations of 2D organic materials as well as their application in alkali-metal-ion batteries containing lithium ion battery(LIB), lithium sulfur battery(LSB), lithium air battery(LAB) and sodium ion battery(SIB) are summarized systematically,and their current challenges including cycling stability and electron conductivity for cathode materials in battery fields are also discussed.展开更多
The development of new battery materials with fast charging/discharging capabilities is necessary to meet the growing demands of modern technologies.While counter ion transport in inorganic materials(generally by de/i...The development of new battery materials with fast charging/discharging capabilities is necessary to meet the growing demands of modern technologies.While counter ion transport in inorganic materials(generally by de/intercalation)currently limits charge/discharge rates in lithium-ion batteries,the weak intermolecular forces in organic materials result in flexible,spacious structures that offer improved ion transport capabilities.Herein,we present the principles which enable fast rate capabilities in organic electrode materials,accompanied by specific literature examples illustrating exceptional rate performances.We discuss approaches to material design which support electron and/or ion transport and the limitations associated with each approach.This review aims to highlight the unique characteristics of organic materials as high-power density electrodes and inspire continued work in the field.展开更多
Room-temperature phosphorescence(RTP) materials have attracted great attention due to their involvement of excited triplet states and comparatively long decay lifetimes.In this short review,recent progress on enhanc...Room-temperature phosphorescence(RTP) materials have attracted great attention due to their involvement of excited triplet states and comparatively long decay lifetimes.In this short review,recent progress on enhancement of RTP from purely organic materials is summarized.According to the mechanism of phosphorescence emission,two principles are discussed to construct efficient RTP materials:one is promoting intersystem crossing(ISC) efficiency by using aromatic carbonyl,heavyatom,or/and heterocycle/heteroatom containing compounds;the other is suppressing intramolecular motion and intermolecular collision which can quench excited triplet states,including embedding phosphors into polymers and packing them tightly in crystals.With aforementioned strategies,RTP from purely organic materials was achieved both in fluid and rigid media.展开更多
基金supported by the National Key R&D Program of China (2017YFD0201801)the Research Foundation of the Science & Technology Agency of Jilin Province, China (20150203004NY)
文摘Labile organic carbon (LC) and recalcitrant organic carbon (RC) are two major fractions of soil organic carbon (SOC) and play a critical role in organic carbon turnover and sequestration. The aims of this study were to evaluate the variations of LC and RC in a semi-arid soil (Inner Mongolia, China) under plastic mulch and drip irrigation after the application of organic materials (OMs), and to explore the effects of OMs from various sources on LC and RC by probing the decomposition characteristics of OMs using in-situ nylon mesh bags burying method. The field experiment included seven treatments, i.e., chicken manure (CM), sheep manure (SM), mushroom residue (MR), maize straw (MS), fodder grass (FG), tree leaves (TL) and no OMs as a control (CK). Soil LC and RC were separated by Huygens D's method (particle size-density), and the average soil mass recovery rate and carbon recovery rate were above 95%, which indicated this method was suitable for carbon pools size analysis. The LC and RC contents significantly (P〈0.01) increased after the application of OMs. Moreover, LC and RC contents were 3.2%-8.6% and 5.0%-9.4% higher in 2016 than in 2015. The applications of CM and SM significantly increased (P〈0,01) LC content and LC/SOC ratio, whereas they were the lowest after the application of TL. However, SOC and RC contents were significantly higher (P〈0.01) after the applications of TL and MS. The correlation analysis indicated the decomposition rate of OMs was positively related with LC content and LC/SOC ratio. In addition, lignin, polyphenol, WOM (total water-soluble organic matter), WHA (water-soluble humic acid), HSL (humicdike substance) and HAL (humic acid-like) contents in initial OMs played important roles in SOC and RC. In-situ nylon mesh bags burying experiment indicated the decomposition rates of CM, SM and MS were significantly higher than those of MR, FG, and TL. Furthermore, MS could result in more lignin derivatives, WHA, and HAL polymers in shorter time during the decomposition process. In conclusion, the application of MS in the semi-arid soil under a long-term plastic mulch and drip irrigation condition could not only improve soil fertility, but also enhance soil carbon sequestration.
基金supported by the National Key Technologies R&D Program of China during the 12th Five-Year Plan period (2011BAD16B15 and 2012BAD14B03)
文摘To make recycling utilization of organic materials produced in various agricultural systems, five kinds of organic materials were applied in a field test, including crop straw (CS), biogas residue (BR), mushroom residue (MR), wine residue (WR), pig manure (PM), with a mineral fertilizer (CF) and a no-fertilizer (CK) treatment as a control. Our objectives were: i) to quantify the effects of organic materials on soil C and N accumulation; ii) to evaluate the effects of organic materials on soil aggregate stability, along with the total organic carbon (TOC), and N in different aggregate fractions; and iii) to assess the relationships among the organic material components, soil C and N, and C, N in aggregate fractions. The trial was conducted in Wuqiao County, Hebei Province, China. The organic materials were incorporated at an equal rate of C, and combined with a mineral fertilizer in amounts of 150 kg N ha^-1, 26 kg P ha^-1 and 124 kg K ha-1 respectively during each crop season of a wheat-maize rotation system. The inputted C quantity of each organic material treatment was equivalent to the total amount of C contained in the crop straw harvested in CS treatement in the previous season. TOC, N, water-stable aggregates, and aggregate-associated TOC and N were investigated. The results showed that organic material incorporation increased soil aggregation and stabilization. On average, the soil macroaggregate proportion increased by 14%, the microaggregate proportion increased by 3%, and mean-weight diameter (MWD) increased by 20%. TOC content followed the order of PM〉WR〉MR〉BR〉CS〉CK〉CF; N content followed the order WR〉PM〉MR〉BR〉CS〉CF〉CK. No significant correlation was found between TOC, N, and the quality of organic material. Soil silt and clay particles contained the largest part of TOC, whereas the small macroaggregate fraction was the most sensitive to organic materials. Our results indicate that PM and WR exerted better effects on soil C and N accumulation, followed by MR and BR, suggesting that organic materials from ex situ farmland could promote soil quality more as compared to straw returned in situ.
基金The National Basic Research Program (973) of China (No. 2004CB3418501)
文摘In order to investigate the adsorption mechanism of trace metals to surficial sediments (SSs), a selective extraction procedure was improved in the present work. The selective extraction procedure has been proved to selectively remove and separate Fe, Mn oxides and organic materials (OMs) in the non-residual fraction from the SSs collected in Songhua River, China. After screening different kinds of conventional extractants of Fe and Mn oxides and OMs used for separation of heavy metals in the soils and sediments, NH2OH .HCl (0.1 mol/L) + HNO3 (0.1 mol/L), (NH4)2C2O4 (0.2 mol/L) + H2C2O4 (pH 3.0), and 30% of H2O2 were respectively applied to selectively extract Mn oxides, Fe/Mn oxides and OMs. After the extraction treatments, the target components were removed with extraction efficiencies between 86.09%--3.36% for the hydroxylamine hydrochloride treatment, 80.63%- 101.09% for the oxalate solution extraction, and 94.76%-102.83% for the hydrogen peroxide digestion, respectively. The results indicate that this selective extraction technology was effective for the extraction and separation ofFe, Mn oxides and OMs in the SSs, and important for further mechanism study of trace metal adsorption onto SSs.
基金supported by the Key Technologies R&D Program of China (2013BAD07B02 and 2013BAC09B01)the Special Fund for Agro-Scientific Research in the Public Interest of China (201103003)+1 种基金the Postdoctoral Project of Jilin Province, China (01912)the Doctoral Initiative Foundation of Jilin Agricultural University, China (201216)
文摘The adsorption of Cu(Ⅱ) from aqueous solution onto humic acid (HA) which was isolated from cattle manure (CHA), peat (PHA), and leaf litter (LHA) as a function of contact time, pH, ion strength, and initial concentration was studied using the batch method. X-ray absorption spectroscopy (XAS) was used to examine the coordination environment of the Cu(ll) adsorbed by HA at a molecular level. Moreover, the chemical compositions of the isolated HA were characterized by elemental analysis and solid-state 13C nuclear magnetic resonance spectroscopy (NMR). The kinetic data showed that the adsorption equilibrium can be achieved within 8 h. The adsorption kinetics followed the pseudo-second-order equation. The adsorption isotherms could be well fitted by the Langmuir model, and the maximum adsorption capacities of Cu(ll) on CHA, PHA, and LHA were 229.4,210.4, and 197.7 mg g-1, respectively. The adsorption of Cu(Ⅱ) on HA increased with the increase in pH from 2 to 7, and maintained a high level at pH〉7. The adsorption of Cu(Ⅱ) was also strongly influenced by the low ionic strength of 0.01 to 0.2 mol L-1 NaNO3, but was weakly influenced by high ionic strength of 0.4 to 1 mol L-1 NaNO3. The Cu(Ⅱ) adsorption on HA may be mainly attributed to ion exchange and surface complexation. XAS results revealed that the binding site and oxidation state of Cu adsorbed on HA surface did not change at the initial Cu(Ⅱ) concentrations of 15 to 40 mg L 1. For all the Cu(Ⅱ) adsorption samples, each Cu atom was surrounded by 40/N atoms at a bond distance of 1.95 A in the first coordination shell. The presence of the higher Cu coordination shells proved that Cu(Ⅱ) was adsorbed via an inner-sphere covalent bond onto the HA surface. Among the three HA samples, the adsorption capacity and affinity of CHA for Cu(Ⅱ) was the greatest, followed by that of PHA and LHA. All the three HA samples exhibited similar types of elemental and functional groups, but different contents of elemental and functional groups. CHA contained larger proportions of methoxyl C, phenolic C and carbonyl C, and smaller proportions of alkyl C and carbohydrate C than PHA and LHA. The structural differences of the three HA samples are responsible for their distinct adsorption capacity and affinity toward Cu(Ⅱ). These results are important to achieve better understanding of the behavior of Cu(Ⅱ) in soil and water bodies in the presence of organic materials.
基金Supported by the National Natural Science Foundation of China(No.50879025)
文摘Artificial neural network(ANN) and full factorial design assisted atrazine(AT) multiple regression adsorption model(AT-MRAM) were developed to analyze the adsorption capability of the main components in the surficial sediments(SSs). Artificial neural network was used to build a model(the determination coefficient square r2 is 0.9977) to describe the process of atrazine adsorption onto SSs, and then to predict responses of the full factorial design. Based on the results of the full factorial design, the interactions of the main components in SSs on AT adsorption were investigated through the analysis of variance(ANOVA), F-test and t-test. The adsorption capability of the main components in SSs for AT was calculated via a multiple regression adsorption model(MRAM). The results show that the greatest contribution to the adsorption of AT on a molar basis was attributed to Fe/Mn(–1.993 μmol/mol). Organic materials(OMs) and Fe oxides in SSs are the important adsorption sites for AT, and the adsorption capabilities are 1.944 and 0.418 μmol/mol, respectively. The interaction among the non-residual components(Fe, Mn oxides and OMs) in SSs interferes in the adsorption of AT that shouldn’t be neglected, revealing the significant contribution of the interaction among non-residual components to controlling the behavior of AT in aquatic environments.
基金funded by the National Key Technology R&D Program of China (2012BAD14B05, 2013BAC09B01)the Major Achievement Transfer Project of Jilin Province, China (20130309005NY)
文摘Knowledge of different effects of various organic materials on soil humic substance is important for both environmental safety and sustainable agriculture.A pot experiment was conducted at Jilin Agricultural University,Jilin Province in northeast China to discover the influence of herb residue,animal excrement,woody residue,animal remnant on fulvic acid(FA) composition and structure using differential thermal analysis-thermogravimetric(DTA-TG),fourier transform infrared spectroscopy(FTIR) and elemental analysis.DTA-TG showed the range of peak temperature in the first exothermic reaction increased following the trend: CK〉herb residue〉animal excrement〉woody residue=animal remnant,and the most weight loss was observed in animal excrement.Moreover,the second exothermic reaction of CK-and animal excrement-FA was presented as double peaks,the order of weight loss in that area was animal remnant〉CK〉woody residue〉animal excrement〉herb residue.According to FTIR,herb residue displayed higher adsorption intensity at 2 950,1 420,1 240 and 1 030 cm-1,animal excrement was in reverse.At the same time,herb residue-and animal excrement-FA had an absorption peak at 1 720 cm-1,while other organic materials didn't have this peak.As elemental analysis showed,FA isolated from various treatments was significantly distinct.It was clearly shown from our results that FA composition and structure in amended soils may be affected in different ways and at various extents on dependence of the nature and origin of amendment.
文摘Opto-thermal transient emission radiometry(OTTER) is a infrared remote sensing technique, which has been successfully used in in vivoskin moisture content and skin moisture depth profiling measurements. In present paper, we extend this moisture content measurement capability to analyze the moisture content of fruit(tomato, grape, etc.) skins, and to study the relationship between fruits ripening process and their surface moisture and moisture depth profiles.
基金the National College Students’Innovation and Entrepreneurship Training Program(202110341014).
文摘Soil potentially hazardous metal(PHM)is continually attracting public attention worldwide,due to its highly toxic properties and potentially huge damage to human being through food chain.Phytoremediation is an effective and eco-friendly way in remediation technology.A pot experiment was carried out to investigate the effect of different organic materials(biogas residue(BR),mushroom residue(MR),and bamboo-shoot shell(BS))application on phytoremediation of two PHM-contaminated soils(Fuyang soil as‘heavily-polluted soil’and Wenzhou soil as‘moderately-polluted soil’,respectively)by Sedum alfrecdii Hance.The results indicated:1)for moderately-polluted soil,the 5%BR treatment had the strongest activation to Cu and Zn,for heavily-polluted soil,1%BS treatment had the highest activation effect for Cu,Zn,Pb and Cd.2)the above-ground biomass of Sedum alfredii Hance increased with the addition rate of organic materials.3)for Cd uptake of Sedum alfredii Hance in moderately-polluted soil,only 1%BS treatment had a better accumulation effect,compared to the control,for Zn element,MR treatments were weaker than the control,while other treatments were better than the control,of which 5%BR,1%BS and 5%BS accumulated more Zn element by 39.6%,32.6%and 23.8%,respectively;in heavily-polluted soil,the treatments of 5%BS,1%BR and 5%BR accumulated more Cd than the control by 12.9%,12.8%and 6.2%,respectively,the treatments with organic materials addition promoted Zn accumulation in shoots of Sedum alfredii Hance,and the best treatment was 5%BS.Therefore,an appropriate application rate of BS and BR could improve the remediation efficiency for Zn/Cd contaminated soils by Sedum alfredii Hance.
基金Supported by the Key Technology Research and Development Program of Guizhou Province(Qiankehe Support[2017]2580)the Major Project of Science and Technology Fund of Guizhou Province(Qiankehe JZ[2014]No.2012)
文摘Heavy metal pollution and remediation of soils have drawn much attention. More and more scholars tend to remediate soil heavy metals without affecting the normal agricultural production. By analyzing the mechanism of action of organic materials to remediate Pb pollution in soil,the effect of different organic materials on the passivation of available Pb in soil was summarized,and the prospect was proposed for the future application of organic materials,in order to provide reference for the remediation of Pb and other heavy metals by organic materials.
基金the MICINN (Spain)(Projects PID2019-104778GB-I00, PID2020-115100GB-I00Excellence Unit “Maria de Maeztu” CEX2019-000919-M)+5 种基金the Royal Society of Chemistryfunded by Generalitat Valenciana(PROMETEU/2021/054 and SEJI/2020/034)the “Ramón y Cajal” program (RYC2019-027940-I)the Royal Society (RGSR1221390)Royal Society of Chemistry (R21-5119312833) for the funding.
文摘Porous organic molecular materials(POMMs)are an emergent class of molecular-based materials characterized by the formation of extended porous frameworks,mainly held by non-covalent interactions.POMMs represent a variety of chemical families,such as hydrogen-bonded organic frameworks,porous organic salts,porous organic cages,C-H···πmicroporous crystals,supramolecular organic frameworks,π-organic frameworks,halogen-bonded organic framework,and intrinsically porous molecular materials.In some porous materials such as zeolites and metal organic frameworks,the integration of multiscale has been adopted to build materials with multifunctionality and optimized properties.Therefore,considering the significant role of hierarchy in porous materials and the growing importance of POMMs in the realm of synthetic porous materials,we consider it appropriate to dedicate for the first time a critical review covering both topics.Herein,we will provide a summary of literature examples showcasing hierarchical POMMs,with a focus on their main synthetic approaches,applications,and the advantages brought forth by introducing hierarchy.
基金the National Natural Science Foundation of China(No.22179108)the Key Research and Development Projects of Shaanxi Province,China(No.2020GXLH-Z-032)+2 种基金the Doctoral Re-search Start-up Fund project of Xi’an Polytechnic University(No.107020589)the Shaanxi Provincial High-Level Talents Introduction Project(Youth Talent Fund)the Performance subsidy fund for Key Laboratory of Dielectric and Electrolyte Functional Material Hebei Province,China(No.22567627H).
文摘Organic contaminants have posed a direct and substantial risk to human wellness and the environment.In recent years,piezo-electric catalysis has evolved as a novel and effective method for decomposing these contaminants.Although piezoelectric materials offer a wide range of options,most related studies thus far have focused on inorganic materials and have paid little attention to organic materi-als.Organic materials have advantages,such as being lightweight,inexpensive,and easy to process,over inorganic materials.Therefore,this paper provides a comprehensive review of the progress made in the research on piezoelectric catalysis using organic materials,high-lighting their catalytic efficiency in addressing various pollutants.In addition,the applications of organic materials in piezoelectric cata-lysis for water decomposition to produce hydrogen,disinfect bacteria,treat tumors,and reduce carbon dioxide are presented.Finally,fu-ture developmental trends regarding the piezoelectric catalytic potential of organic materials are explored.
文摘The purpose of this paper is to present the results of investigations on quasi-one-dimensional organic crystals of tetrathiotetracene-tetracyanoquinodi- methane (TTT(TCNQ)<sub>2</sub>) from the prospective of thermoelectric applications. The calculations were performed after analytical expressions, obtained in the frame of a physical model, more detailed than the model presented earlier by authors. The main Hamiltonian of the model includes the electronic and phonon part, electron-phonon interactions and the impurity scattering term. In order to estimate the electric charge transport between the molecular chains, the physical model was upgraded to the so-called three-dimen- sional (3D) physical model. Numeric computations were performed to determine the electrical conductivity, Seebeck coefficient, thermal conductivity, thermoelectric power factor and thermoelectric figure-of-merit as a function on charge carrier concentrations, temperatures and impurity concentrations. A detailed analysis of charge-lattice interaction, consisting of the exploration of the Peierls structural transition in TCNQ molecular chains of TTT(TCNQ)<sub>2</sub> was performed. As result, the critical transition temperature was determined. The dispersion of renormalized phonons was examined in detail.
基金the support from the National Key Research & Development Program (2022YFB3803700) of ChinaNational Natural Science Foundation (No.52171186)the support from the Center of Hydrogen Science,Shanghai Jiao Tong University。
文摘Rechargeable magnesium-ion batteries(MIBs) are favorable substitutes for conventional lithium-ion batteries(LIBs) because of abundant magnesium reserves, a high theoretical energy density, and great inherent safety. Organic electrode materials with excellent structural tunability,unique coordination reaction mechanisms, and environmental friendliness offer great potential to promote the electrochemical performance of MIBs. However, research on organic magnesium battery cathode materials is still preliminary with many significant challenges to be resolved including low electrical conductivity and unwanted but severe dissolution in useful electrolytes. Herein, we provide a detailed overview of reported organic cathode materials for MIBs. We begin with basic properties such as charge storage mechanisms(e.g., n-, p-, and bipolartype), moving to recent advances in various types of organic cathodes including carbonyl-, nitrogen-, and sulfur-based materials. To shed light on the diverse strategies targeting high-performance Mg-organic batteries, elaborate summaries of various approaches are presented.Generally, these strategies include molecular design, polymerization, mixing with carbon, nanosizing and electrolyte/separator optimization.This review provides insights on exploring high-performance organic cathodes in rechargeable MIBs.
基金All authors would like to acknowledge the support from the National Natural Science Foundation of China(NSFC no.51872128)the Ministry of Science and Technology of China(grant nos.G2021014005L and G2022014098L)+1 种基金the Natural Science Foundation of Jiangsu Province(grant no.BK20210744)the Young Talent Support Fund from Jiangsu University(grant no.5501310023).
文摘Organic electrode materials(OEMs),withmerits of structural diversity,molecular-level controllability,resource abundance,and environmental friendliness,have become a promising electrode candidate for low-carbon renewable batteries.Safer,environmentally benign,and sustainable aqueous rechargeable batteries are particularly appealing for large-scale energy storage applications.This review aims to provide an insightful discussion of OEMs in nonmetallic charge carrier-based batteries,especially for the application in aqueous rechargeable systems.The emerging application of OEMs in versatile aqueous batteries will be analyzed emphatically,including aqueous proton batteries,aqueous ammonium-ion batteries,and air self-charging batteries.We expect that this review can serve as a guide for the future development of OEMs in nonmetallic charge carrier-based batteries and provide inspiration for unmet challenges.
基金This research project was financially supported by the National Natural Science Foundation of China (51403220, 51203173, 21434009).
文摘Design and preparation of organic materials having the ability to automatically restore their mechanical and physical properties are of great importance because of the extensive application ranging from aerospace components to microcircuitry, where the accessibility is highly limited and the reparability of materials is lower. The self-healing behavior is actually a dy- namic property of material, resembling what is possessed by nature living systems. Therefore, fabrication of most self-healing materials is actually inspired by nature. This tutorial review focuses on the basic chemical mechanisms that have been suc- cessfully adopted in designing self-healing organic materials. It specially covers recent development in the design of materials with durable, easy repairable or self-healing superhydrophobic surfaces and coatings.
文摘A 180-day incubation experiment was con- ducted to investigate the effect of different organic materials on the chemical properties of coastal soil with high salinity and relatively low pH. Four organic materials (three kinds of plant residues: straw, composted straw, and fresh reed; and one kind of poultry manure: chicken manure) were applied at a ratio of 15 g·kg^-1 to samples of costal saline soil from the Yellow River Delta of China. The results showed that the soil pH and exchangeable sodium percentage (ESP) decreased, whereas soil cation exchangeable capacity (CEC) and macronutrient concen- trations increased, regardless of the type of organic material used. All treatments showed a remarkable increase in soil soluble organic carbon (SOC) during the 180-day incubation. The peak values of SOC in descend- ing order were chicken manure, reed, composted straw, straw, and control soil. At the end of incubation, the highest level of SOC occurred in the straw-amended soil, followed by composted straw, reed, and chicken manure- amended soils. Soil respiration rate and available nitrogen were significantly influenced by the type of material used. Although reed-amended soil had a relatively high SOC and respiration rate, the ESP was reduced the least. Consider- ing the possible risk of heavy metals caused by chicken manure, it is proposed that straw and composted straw are the more efficient materials to use for reclaiming costal saline soil and improving the availability of macronu- trients.
基金supported by a grant from the Research Grants Council (RGC) of the Hong Kong Special Administrative Region (HKSAR), China, under Theme-based Research Scheme through Project No. T23-60I/17-R
文摘Redox flow batteries (RFBs) have great potentials in the future applications of both large scale energy storage and powering the electrical vehicle. Critical challenges including low volumetric energy density. high cost and maintenance greatly impede the wide application of conventional RFBs based on inorganic materials. Redox-active organic molecules have shown promising prospect in the application of RFBs, benefited from their low cost, vast abundance, and high tunability of both potential and solubility. In this review, we discuss the advantages of redo~ active organic materials over their inorganic compart and the recent progress of organic based aqueous and non-aqueous RFBs. Design considerations in active materi- als, choice of electrolytes and membrane selection in both aqueous and non-aqueous RFBs are discussed. Finally. we discuss remaining critical challenges and suggest future directions for improving organic based RFBs.
基金the financial support from the 973 Programs of China(2013CBA01602)NSFC for Excellent Youth Scholars(51722304)+4 种基金NSFC(21720102002,21574080 and 61306018)Shanghai Committee of Science and Technology(15JC1490500,16JC1400703)and Open Project Program of the State Key Laboratory of Supramolecular Structure and Materials(sklssm201732,Jilin University)State Key Laboratory of Inorganic Synthesis and Preparative Chemistry(2016-08,Jilin University)State Key Laboratory for Mechanical Behavior of Materials(20161803,Xi’an Jiaotong University)
文摘With the increasing demand for large-scale battery systems in electric vehicles(EVs) and smart renewable energy grids, organic materials including small molecules and polymers utilized as electrodes in rechargeable batteries have received increasing attraction. In recent years, two-dimensional(2D) organic materials possessing planar layered architecture exhibit optional chemical modification, high specific surface area as well as unique electrical/magnetic properties, which have been emerging as the promising functional materials for wide applications in optoelectronics, catalysis, sensing, etc. Integrating with high-density redox-active sites and hierarchical porous structure, significant achievements in 2D organic materials as cathode materials for alkali-metal-ion batteries have been witnessed. In this review, the recent progress in synthetic approaches, structure analyses, electrochemical characterizations of 2D organic materials as well as their application in alkali-metal-ion batteries containing lithium ion battery(LIB), lithium sulfur battery(LSB), lithium air battery(LAB) and sodium ion battery(SIB) are summarized systematically,and their current challenges including cycling stability and electron conductivity for cathode materials in battery fields are also discussed.
文摘The development of new battery materials with fast charging/discharging capabilities is necessary to meet the growing demands of modern technologies.While counter ion transport in inorganic materials(generally by de/intercalation)currently limits charge/discharge rates in lithium-ion batteries,the weak intermolecular forces in organic materials result in flexible,spacious structures that offer improved ion transport capabilities.Herein,we present the principles which enable fast rate capabilities in organic electrode materials,accompanied by specific literature examples illustrating exceptional rate performances.We discuss approaches to material design which support electron and/or ion transport and the limitations associated with each approach.This review aims to highlight the unique characteristics of organic materials as high-power density electrodes and inspire continued work in the field.
基金the financial support from The National Basic Research Program of China(No.2014CB643802)Ministry of Science and Technology(No.2016YFB0401001)the State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals
文摘Room-temperature phosphorescence(RTP) materials have attracted great attention due to their involvement of excited triplet states and comparatively long decay lifetimes.In this short review,recent progress on enhancement of RTP from purely organic materials is summarized.According to the mechanism of phosphorescence emission,two principles are discussed to construct efficient RTP materials:one is promoting intersystem crossing(ISC) efficiency by using aromatic carbonyl,heavyatom,or/and heterocycle/heteroatom containing compounds;the other is suppressing intramolecular motion and intermolecular collision which can quench excited triplet states,including embedding phosphors into polymers and packing them tightly in crystals.With aforementioned strategies,RTP from purely organic materials was achieved both in fluid and rigid media.