Recovery of Gold from Aqueous Solution Containing Au（Ⅲ） by Silicon Organic Polymer

The silicon organic polymer containing PSOT-3 （dioxothiocarbamide groups） has been synthesized and characterized, and the adsorption of Au（III） on PSOT-3 was investigated. The results showed that PSOT-3 had good adsorption capacity for Au（III）, and the adsorption of Au（III） was found to be the most effective in 0.1-0.3 mol/dm^3 hydrochloric acid solution. The adsorption is physical and the process is endothermic, and Freundlich isotherm fits the data better than the Langmuir isotherm. The adsorption can be generally described by electrostatic interaction （Coulomb＇s force） between the adsorbent and the adsorbate. The high adsorption capacity of this sorbent has significant potential for gold recovery from aqueous solutions.

Synthesis of Waterborne Polyurethane Modified by Nano-SiO_2 Silicone and Properties of the WPU Coated RDX

A series of nano silica/silicone modified waterborne polyurethane(WPU) have been synthesized from polytetramethylene glycol and isophorone diisocyanate, dihydroxymethyl propionic acid and triethylamine, ethylenediamine, trimethylolpropane, nano-SiO2 and the silane coupling agent KH550. The effect of the dosage of nano-SiO2 on the WPU-Si membrane and the coated RDX(cyclotrimethylenetrinitramine) particles have been studied in terms of their surface properties, mechanical properties, and thermal stability. The results showed that with the increase of Si content, the stability of the emulsion reduced gradually. The material with more Si content displayed an increased thermodynamic stability, an increased high temperature resistance, an increased tensile strength and a decreased elongation at break. With the increase of Si content, the surface tension of the material decreased, the bibulous rate reduced, and the contact angle increased gradually, so that the surface tension of the polyurethane and RDX are close to each other which could improve the performance of coating.

100 GHz silicon–organic hybrid modulator

Electro-optic modulation at frequencies of 100 GHz and beyond is important for photonic-electronic signal processing at the highest speeds.To date,however,only a small number of devices exist that can operate up to this frequency.In this study,we demonstrate that this frequency range can be addressed by nanophotonic,silicon-based modulators.We exploit the ultrafast Pockels effect by using the silicon–organic hybrid(SOH)platform,which combines highly nonlinear organic molecules with silicon waveguides.Until now,the bandwidth of these devices was limited by the losses of the radiofrequency(RF)signal and the RC(resistor-capacitor)time constant of the silicon structure.The RF losses are overcome by using a device as short as 500 μm,and the RC time constant is decreased by using a highly conductive electron accumulation layer and an improved gate insulator.Using this method,we demonstrate for the first time an integrated silicon modulator with a 3dB bandwidth at an operating frequency beyond 100 GHz.Our results clearly indicate that the RC time constant is not a fundamental speed limitation of SOH devices at these frequencies.Our device has a voltage–length product of only V_(π)L=11 V mm,which compares favorably with the best silicon-photonic modulators available today.Using cladding materials with stronger nonlinearities,the voltage–length product is expected to improve by more than an order of magnitude.

Silica Hybrid Containing (R)-2,2′-Binaphtho-20-crown-6 Moieties via the Sol-Gel Process

R ) 6,6′ Bis(triethoxysilylethen 2 yl) 2,2′ binaphtho 20 crown 6 (precursor, R 2) derived from ( R ) 2,2′ BINOL derivative was synthesized by Pd catalyzed Heck reaction of ( R ) 6,6′ dibromo 2,2′ binaphtho 20 crown 6 ( R 1) intermediate with vinyltriethoxysilane. The hydrolysis and polycondensation of the precursor gave rise to the corresponding xerogel. Both precursor and xerogel were analysed by NMR, FT IR, UV, CD spectra, fluorescent spectroscopy, polarimetry and elemental analysis. The precursor and xerogel can emit strong blue fluorescence and are expected to have the potential application in the separation of chiral molecules as fluorescent sensor. The precursor exhibits strong Cotton effect in its circular dichroism (CD) spectrum indicating that it is a highly rigid structure.

Conjugated Polymers as Hole Transporting Materials for Solar Cells

In principle,conjugated polymers can work as electron donors and thus as low-cost p-type organic semiconductors to transport holes in photovoltaic devices.With the booming interests in high-efficiency and low-cost solar cells to tackle global climate change and energy shortage,hole transporting materials(HTMs)based on conjugated polymers have received increasing attention in the past decade.In this perspective,recent advances in HTMs for a range of photovoltaic devices including dye-sensitized solar cells(DSSCs),perovskite solar cells(PSCs),and silicon(Si)/organic heterojunction solar cells(HSCs)are summarized and perspectives on their future development are also presented.