Organic Light Emitting Diodes with Lithium Contained Alq3 as Electron Injection Layer

lNovel lithium doped tris 8 hydroxylquinoline aluminium(Alq3:Li) layer is deposited between emission layer and electron injection aluminium electrode as an electron injection assistant layer in different organic light emitting diodes(OLED) to lower the electron injection barrier. In these devices, Alq3 is used as emission layer, and a bilayer film of N,N bis (1 naphhyl) N,N diphenyl 1,1 biphenyle 4,4' diamine(NPB) and 4,4,4' tris(3 methyl phenylphenylamino) triphenylamine( m MTDATA) used as hole transport layer(HTL). The electroluminescent performance of devices with different thicknesses of Alq3∶Li shows that the insertion of the lithium doped Alq3 layer can reduce the turn on voltage by at least 2 volts, and the stability of devices with this lithium doped Alq3 layer is improved too. It can also change the efficiency of devices. Compared with an ultra thin lithium fluoride(LiF) layer, Alq3∶Li sheet gives similar effects but higher efficiency and can be much thicker and hence it is easier to control the deposition.

Organic light emitting diodes using magnesium doped organic acceptor as electron injection layer and silver as cathode

Organic light emitting diodes employing magnesium doped electron acceptor 3, 4, 9, 10 perylenetetracarboxylic dianhydride （Mg：PTCDA） as electron injection layer and silver as cathode were demonstrated. As compared to Mg ： Ag cathode, the combination of the Mg ： PTCDA layer and silver provided enhanced electron injection into tris （8- quinolinolato） aluminium. The device with 1 ： 2 Mg ： PTCDA and Ag showed an increase of about 12% in the maximum current efficiency, mainly due to the improved hole-electron balance, and an increase of about 28% in the maximum power efficiency, as compared to the control device using Mg ： Ag cathode. The properties of Mg ： PTCDA composites were studied as well.

Thermal Analysis of Organic Light Emitting Diodes Based on Basic Heat Transfer Theory

We investigate the thermal characteristics of standard organic light-emitting diodes （OLEDs） using a simple and clear 1D thermal model based on the basic heat transfer theory. The thermal model can accurately estimate the device temperature, which is linearly with electrical input power. The simulation results show that there is almost no temperature gradient within the OLED device working under steady state conditions. Furthermore, thermal analysis simulation results show that the surface properties （convective heat transfer coetficient and surface emissivity） of the substrate or cathode can significantly affect the temperature distribution of the OLED.

Highly Efficient and Stable Hybrid White Organic Light Emitting Diodes with Controllable Exciton Behavior by a Mixed Bipolar Interlayer

Highly efficient and stable hybrid white organic light-emitting diodes （HWOLEDs） with a mixed bipolar interlayer between fluorescent blue and phosphorescent yellow emitting layers are demonstrated. The bipolar interlayer is a mixture of p-type diphenyl （l0-phenyl-lOH-spiro [acridine-9,9＇-fluoren]-3Lyl） phosphine oxide and n-type 2＇,2- （1,3,5-benzinetriyl）-tris（1-phenyl-l-H-benzimidazole）. The electroluminance and Commission Internationale de l＇Eclairage （CIE1931） coordinates＇ characteristics can be modulated easily by adjusting the ratio of the hole- predominated material to the electron-predominated material in the interlayer. The hybrid WOLED with a p-type：n-type ratio of 1：3 shows a maximum current efficiency and power efficiency of 61.1 ed/A and 55.8 lm/W, respectively, with warm white CIE coordinates of （0.34, 0.43）. The excellent efficiency and adaptive CIE coordi- nates are attributed to the mixed interlayer with improved charge carrier balance, optimized exciton distribution, and enhanced harvesting of singlet and triplet excitons.

Improvement of electro-optic performances in white organic light emitting diodes with color stability by buffer layer and multiple dopants structure

A series of white phosphorescent OLED devices with buffer layer and multiple dopant structure is investigated in order to obtain better electro-optic performances and color stability. The color coordinate and color stability are related to the location of multiple dopants layer, and the optimized location can compensate for the change of the blue emission intensity under a high voltage and stabilize the spectrum. The electro-optic performances and color stability can be further improved by changing the composition and thickness of the buffer layer between the emitting layer and the electron transport layer.In device B2, the distance from multiple dopant layer to buffer layer is 2 nm and the thickness of buffer layer is 5 nm,the maximum luminance, current density, and power efficiency can reach 9091 cd/m^2, 364.5 mA/cm^2, and 26.74 lm/W,respectively. The variation of international commission on the illumination（CIE） coordinate of device B2 with voltage increasing from 4 V to 7 V is only（0.006, 0.004）.

Novel Field Emission Organic Light Emitting Diodes with Dynode

This work presents novel field emission organic light emitting diodes(FEOLEDs) with dynode,in which an organic EL light-emitting layer is used instead of an inorganic phosphor thin film in the field emission display(FED).The proposed FEOLEDs introduce field emission electrons into organic light emitting diodes(OLEDs),which exhibit a higher luminous efficiency than conventional OLED.The field emission electrons emitted from the carbon nanotubes(CNTs) cathode and to be amplified by impact the dynode in vacuum.These field emission electrons are injected into the multi-layer organic materials of OLED to increase the electron density.Additionally,the proposed FEOLED increase the luminance of OLED from 10 820 cd/m2 to 24 782 cd/m2 by raising the current density of OLED from an external electron source.The role of FEOLED is to add the quantity of electrons-holes pairs in OLED,which increase the exciton and further increase the luminous efficiency of OLED.Under the same operating current density,the FEOLED exhibits a higher luminous efficiency than that of OLED.

High efficient and high color rendering index white organic light-emitting diodes

We have fabricated high-efficient white organic light-emitting diodes （WOLEDs） using two types of electron transport materials with different electron mobility. The effect of the electron mobility on the device performance is discussed. In addition, to generate the desired white emission and high color rendering index, we perform the structure design of OLED, in which the functions of co-host of blue and green dopants on chromatic-stability are investigated. Experimental results find that the maximum color rendering index reaches as high as 91 at the voltage of 8 V.

Pure blue and white light electroluminescence in a multilayer organic light-emitting diode using a new blue emitter

We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.

High color rendering index white organic light-emitting diode using levofloxacin as blue emitter

Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.

Increased performance of an organic light-emitting diode by employing a zinc phthalocyanine based composite hole transport layer

We demonstrate that the electroluminescent performances of organic light-emitting diodes are significantly improved by employing a zinc phthalocyanine （ZnPc）-based composite hole transport layer （c-HTL）. The optimum ris-（8-hydroxyquinoline）aluminum （Alq3）-based organic light-emitting diode with a c-HTL exhibits a lower turn-on voltage of 2.8 V, a higher maximum current efficiency of 3.40 cd/A and a higher maximum power efficiency of 1.91 lm/W, which are superior to those of the conventional device （turn-on voltage of 3.8 V, maximum current efficiency of 2.60 cd/A, and maximum power efficiency of 1.21 lm/W）. We systematically studied the effects of different kinds of N’-diphenyl-N,N’-bis（1-naphthyl）（1,1’-biphenyl）-4,4’diamine （NPB）：ZnPc c-HTL. Meanwhile, we also investigate their mechanisms different from that in the case of using ZnPc as buffer layer. The specific analysis is based on the absorption spectra of the hole transporting material and current density–voltage characteristics of the corresponding hole-only devices.

Position dependence of extraction ef f iciency in organic light-emitting diodes with photonic crystal structure

We demonstrate by finite-difference time-domain simulations that a one-dimensional （1D） photonic crys- tal （PC） structure between glass substrate and indium tin oxide layer can improve the light extraction efficiency of organic light-emitting diodes. The extraction efficiency depends on the emitters＇ positions varying laterally in a unit cell of PC. The highest efficiency is obtained when the emitters are under higher refractive index strips. Efficiency decreases when the emitters shift to lower refractive index strips. Simulations for both transverse magnetic and transverse electric modes indicate that when emitters are close to the middle of the higher refractive index strips, the guided wave transmits with less divergence and inhibited reflection because of the guiding effect of higher refractive index strips. A modified method that considers the position effects is proposed to calculate the extraction efficiency more precisely.

Highly Efficient Hybrid White Tandem Organic Light-Emitting Diodes with MoO3 Layer

Electroluminescence （EL） characteristics have been studied for a hybrid tandem white organic light emitting diode （OLED） with a blue emitting fluorescent EL1 unit based on BCzVBi and a yellow emitting phosphorescent EL2 unit based on （fbi）2Ir（acac）, where a MoO3 layer is inserted between EL1 and EL2 units as charge generation layer （CGL）. Maximum current and power efficiencies of 68.1 cd/A and 29.2 lm/W were obtained, respectively, while the current and power efficiencies at luminance of 1000 cd/m2 were 68.0 cd/A and 24.6 lm/W. The yellow emission appears from about 4.5 V firstly, while the blue emission starts to appear from about 5.4 V. It was found that charge generation from CGL of MoO3/NPB bilayer occurred at high voltages of above 5.4 V but not at low voltages below 5.2 V.

Thin-film encapsulation for top-emitting organic light-emitting diode with inverted structure

We theoretically study the light outcoupling efficiency of top-emitting organic light-emitting diode（OLED） with inverted structure and thin-film encapsulation.Thin-film optics is used to optimize the layer thickness to obtain high transmittance.Dipole mode is used to analyze the light outcoupling efficiency of the top-emitting OLED.Through this process,we can optimize the thin-film thickness with high transmittance and optimize the outcoupling efficiency of OLED.Compared with previous research,the current design method is a novel process.

New Opportunities for Lanthanide Luminescence

Trivalent lanthanide ions display fascinating optical properties. The discovery of the corresponding elements and their first industrial uses were intimately linked to their optical properties. This relationship has been kept alive until today when many high-technology applications of lanthanide-containing materials such as energy-saving lighting devices, displays, optical fibers and amplifiers, lasers, responsive luminescent stains for biomedical analyses and in cellulo sensing and imaging, heavily rely on the brilliant and pure-color emission of lanthanide ions. In this review we first outlined the basics of lanthanide luminescence with emphasis on f-f transitions, the sensitization mechanisms, and the assessment of the luminescence efficiency of lanthanide-containing emissive molecular edifices. Emphasis was then put on two fast developing aspects of lanthanide luminescence： materials for telecommunications and light emitting diodes, and biomedical imaging and sensing. Recent advances in NIR-emitting materials for plastic amplifiers and waveguides were described, together with the main solutions brought by researchers to minimize non-radiative deactivation of excited states. The demonstration in 1999 that erbium tris（8-hydroxyquinolinate） displayed a bright green emission suitable for organic light emitting diodes （OLEDs） was followed by realizing that in OLEDs, 25% of the excitation energy leads to singlet states and 75% to triplet states. Since lanthanide ions are good triplet quenchers, they now also play a key role in the development of these lighting devices. Luminescence analyses of biological molecules are among the most sensitive analytical techniques known. The long lifetime of the lanthanide excited states allows time-resolved spectroscopy to be used, suppressing the sample autofluorescence and reaching very low detection limits. Not only visible lanthanide sensors are now ubiquitously provided in medical diagnosis and in cell imaging, but the feasibility of using NIR emission of ions such as YbⅢ is now being tested because of deeper penetration in biological tissues.

Optimization of top polymer gratings to improve GaN LEDs light transmission

We present a grating model of two-dimensional （2D） rigorous coupled wave analysis （RCWA） to study top diffraction gratings on light-emitting diodes （LEDs）. We compare the integrated-transmission of the non-grating, rectangular-grating, and triangular-grating cases for the same grating period of 6 μm, and show that the triangular grating has the best performance. For the triangular grating with 6-μm period, the LED achieves the highest light transmission at 6-μm grating bottom width and 2.9-μm grating depth. Compared with the non-grating case, the optimized light transmission improvement is about 74.6%. The simulation agrees with the experimental data of the thin polymer grating encapsulated flip-chip （FC） GaN-based LEDs for the light extraction improvement.

Light extraction of GaN LEDs with 2-D photonic crystal structure

Ultraviolet photo-lithography is employed to introduce two-dimensional （2D） photonic crystal （PC） structure on the top surface of GaN-based light emitting diode （LED）. PC patterns are transferred to 460-rimthick transparent indium tin oxide （ITO） electrode by inductively coupled plasma （ICP） etching. Light intensity of PC-LED can be enhanced by 38% comparing with the one without PC structure. Rigorous coupled wave analysis method is performed to calculate the light transmission spectrum of PC slab. Simulation results indicate that total internal reflect angle which modulated by PC structure has been increased by 7°, which means that the light extraction efficiency is enhanced outstandingly.

Synthesis and properties of binaphthyl chiral thermally activated delayed fluorescence molecules using thioxanthone as acceptor

The currently reported axial chiral molecules based on the 3,3'-substitution of the binaphthyl skeleton are limited by intrinsic fluorescence properties,resulting in generally low device efficiencies(EQE<5%)of related organic light emitting diodes(OLEDs).Herein,we designed and synthesized four pair of chiral binaphthyl enantiomers(R/S-1-R/S-4)adopting acceptor-donor-donor-acceptor(ADDA)structure by introducing different thioxanthone modification groups on the 3,3'-position of 2,2'-dimethoxy-1,1'-binaphthalene.Among them,emitter R/S-2 and R/S-4 obtained by enhancing intramolecular charge transfer exhibited TADF characteristics due to relatively small Est of 0.12eV and 0.17eV,and relatively moderate SOC matrix elements of 0.28 cm^(-1)and 0.10 cm^(-1)between the 1CT and 3LE states.The CD spectra of these enantiomers in diluted solutions showed perfect mirror images and reasonable gabs for small organic molecules(10^(-4)-10^(-3)).And the external quantum eficiencies(EQE)of 10.9%and 8.32%for device A and B based on emitter S-2 and S-4 were highest compared with currently reported axial chiral molecules based on the 3,3'-position substitution of binaphthyl skeleton,providing simple molecular design strategies to construct efficient CP-OLED device.

Reliable high temperature, high humidity flexible thin film encapsulation using Al2O3/MgO nanolaminates for flexible OLEDs

Since most organic materials are very sensitive to moisture and oxygen, organic light emitting diodes (OLEDs) require an encapsulation layer to protect the active layer from these gases. Since light, flexible and portable OLEDs are being employed in more diverse climates and environmental conditions, the OLED encapsulation layer must retain robust mechanical properties and stability in high temperature/high humidity conditions. Al2O3 films have demonstrated excellent barrier performance, but they readily hydrolyze when exposed to prolonged harsh environments. In this study, we fabricated a thin film encapsulation (TFE) film that was resistant to hydrolysis, using Al2O3/MgO (AM) nanolaminates. MgO has superior resistance to harsh environments, and the aluminate phase generated by the chemical reaction of Al2O3 and MgO provided excellent barrier performance, even after storage in harsh conditions. A multi-barrier fabricated using the AM nanolaminate showed excellent barrier performance, close to the level required by OLEDs. It did not significantly deteriorate even after a bending test of 1,000 iterations at 0.63% strain. After 1,000 cycle of bending, the electrical properties of the passivated OLEDs were not significantly degraded at shelf-lifetime test where the fabricated device was stored for 50 days in a harsh environment of 60℃, 90% relative humidity. The multi-barrier shows the best performance compared to previous studies on flexible encapsulation that can be used in harsh environments.

Tailoring Excited State Properties and Energy Levels Arrangement via Subtle Structural Design on D-π-A Materials

The donor-n-conjugated-acceptor （D-n-A） structure is an important design for the luminescent materials be- cause of its diversity in the selections of donor, n-bridge and acceptor groups. Herein, we demonstrate two examples of D-^-A structures capable to finely modulate the excited state properties and arrangement of energy levels, TPA-AN-BP and CZP-AN-BP, which possess the same acceptor and n-bridge but different donor. The investigation of their photophysical properties and DFT calculation revealed that the D-n-A structure with proper donor, n-bridge and acceptor can result in separation of frontier molecular orbitals on the corresponding donor and acceptor with an obvious overlap on the n-bridge, resulting in a hybridized local and charge-transfer （HLCT） excited state with high photoluminescent （PL） efficiencies. Meanwhile, their singlet and triplet states are arranged on corresponding moie- ties with large energy gap between T2 and T1, and a small energy gap between S1 and T2, which favor the reverse intersystem crossing （RISC） from high-lying triplet levels to singlet levels. As a result, the sky-blue emission non-doped OLED based on the TPA-AN-BP reached maximum external quantum efficiency （EQE） of 4.39% and a high exciton utilization efficiency （EUE） of 77%. This study demonstrates a new strategy to construct highly effi- cient OLED materials.