Life cycle assessment of high concentration organic wastewater treatment by catalytic wet air oxidation

There have been many studies on life cycle assessment in sewage treatment,but there are scarce few studies on the treatment of industrial wastewater in combination with advanced oxidation technology,especially in catalytic wet air oxidation(CWAO).There are no cases of using actual industrialized data onto life cycle assessment.This paper uses Simapro 9.0 software to establish a life cycle assessment model for the treatment of high-concentration organic wastewater by CWAO,and comprehensively explains the impact on the environment from three aspects:the construction phase,the operation phase and the demolition phase.In addition,sensitivity analysis and uncertainty analysis were performed.The results showed that the key factors affecting the environment were marine ecotoxicity,mineral resource consumption and global warming,the operation stage had the greatest impact on the environment,which was related to high power consumption during operation and emissions from the treatment process.Sensitivity analysis showed that electricity consumption has the greatest impact on abiotic depletion and freshwater aquatic ecotoxicity,and it also proved that global warming is mainly caused by pollutant emissions during operation phase.Monte Carlo simulations found slightly higher uncertainty for abiotic depletion and toxicity-related impact categories.

Dual-functional MnS_(2)/MnO_(2) heterostructure catalyst for efficient acidic hydrogen evolution reaction and assisted degradation of organic wastewater

The design and synthesis of non-precious metal dual-functional electrocatalysts through the modulation of electronic structure are important for the development of renewable hydrogen energy.Herein,MnS_(2)/MnO_(2)-CC heterostructure dual-functional catalysts with ultrathin nanosheets were prepared by a twostep electrodeposition method for efficient acidic hydrogen evolution reaction(HER) and degradation of organic wastewater(such as methylene blue(MB)).The electronic structure of Mn atoms at the MnS_(2)/MnO_(2)-CC heterostructure interface is reconfigured under the joint action of S and O atoms.Theoretical calculations show that the Mn d-band electron distribution in MnS_(2)/MnO_(2)-CC catalyst has higher occupied states near the Fermi level compared to the MnO_(2) and MnS_(2) catalysts,which indicates that MnS_(2)/MnO_(2)-CC catalyst has better electron transfer capability and catalytic activity.The MnS_(2)/MnO_(2)-CC catalysts require overpotential of only 66 and 116 mV to reach current density of 10 and 100 mA cm^(-2)in MB/H_(2)SO_(4) media.The MnS_(2)/MnO_(2)-CC catalyst also has a low Tafel slope(26.72 mV dec^(-1)) and excellent stability(the performance does not decay after 20 h of testing).In addition,the MB removal efficiency of the MnS_(2)/MnO_(2)-CC catalyst with a better kinetic rate(0.0226) can reach 97.76%,which is much higher than that of the MnO_(x)-CC catalyst(72.10%).This strategy provides a new way to develop efficient and stable non-precious metal dual-functional electrocatalysts for HER and organic wastewater degradation.

Study on Treatment Technologies of High Concentrations of Industrial Organic Wastewater

The characteristics and harm of high concentrations of organic wastewater were introducecl firstly, and then several treatment processes and effects of high concentrations of organic wastewater were summarized, which can provide theoretical references for the choice of wastewater treatment process.

Progress of Electrocatalytic Technology in Treating Organic Chemical Wastewater

In recent years,extensive research has been conducted on the preparation of high catalytic performance electrodes and the development of electrocatalytic water treatment processes.This article introduces the basic principles of electrochemical water treatment,the preparation of electrode materials,and the research progress of electrocatalytic technology for degrading organic chemical wastewater.It analyzes the problems faced by electrocatalytic degradation of organic chemical wastewater and looks forward to the development trend of electrocatalytic technology in the field of organic chemical wastewater treatment.

Recent advances in persulfate-based advanced oxidation processes for organic wastewater treatment

In recent years,with the emergence of new pollutants,the effective treatment of wastewater has become very important.Persulfate-based advanced oxidation processes have been successfully applied to the treatment of wastewater,such as wastewater containing antibiotics,pharmaceuticals and personal care products,dyes,endocrine-disrupting chemicals,chlorinated organic pollutants,and phenolics,for the degradation of refractory organic contaminants.This paper summarizes the production of sulfate radicals,which can be generated by the activation of persulfate via conventional and emerging approaches.The existing problems of persulfate-based advanced oxidation processes were analyzed in detail,including residual sulfates,coexisting factors(coexisting inorganic anions and natural organic matter),and energy consumption.This paper proposes corresponding possible solutions to the problems mentioned above,and this paper could provide a reference for the application of persulfate-based advanced oxidation processes in actual wastewater treatment.

LPWCO method for the treatment of high concentrated organic wastewater

Based on wet air oxidation (WAO) and Fenton reagent, this paper raised a new low pressure wet catalytic oxidation (LPWCO) which requires low pressure for the treatment of highly concentrated and refractory organic wastewater. Compared with general wet air oxidation, the pressure of the treatment(0 1—0 6MPa) is only one of tens to percentage of latter (3 5—10MPa). In addition, its temperature is no more than 180℃. Compared with Fenton reagent, while H 2O 2/COD(weight ratio) is less than 1 2, the removal of COD in the treatment is over twenty percents more than Fenton's even the value of COD is more than 14000mg/L. In this paper, the effect factor of COD removal and the mechanism of this treatment were studied. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H 2SO 4 Fenton reagent system under the condition of applied pressure and heating (0 1—0 6MPa, 104—165℃) was verified. The best condition of this disposal are as follows: H 2O 2/COD (weight ratio)=0 2—1 0, Fe 2+ 0 6×10 -3 mol, H 2SO 4 0 5mol, COD>1×10 4mg/L, the operating pressure is 0 1—0 6MPa and temperature is 104—165℃. This method suits to dispose the high concentrated refractory wastewater, especially to the wastewater containing H 2SO 4 produced in the manufacture of pesticide, dyestuff and petrochemical works.

Application of Microbial Fuel Cells in Wastewater Treatment

Traditional wastewater treatment is an industry with high energy consumption. Under the dual pressures of environmental pollution and energy shortage,microbial fuel cells（ MFCs） have been paid more attention to due to their unique advantages of high efficiency,high cleanliness,and environmental protection,and have become a research hotspot in the current environmental field. In this study,advances in the application of MFCs in wastewater treatment were summarized,and main problems were analyzed.

Degradation of kanamycin from production wastewater with high-concentration organic matrices by hydrothermal treatment

It is known that many kinds of fermentative antibiotics can be removed by temperatureenhanced hydrolysis from production wastewater based on their easy-to-hydrolyze characteristics.However,a few aminoglycosides are hard to hydrolyze below 100℃ because of their stability expressed by high molecular energy gap(E).Herein,removal of hard-to-hydrolyze kanamycin residue from production wastewater by hydrothermal treatment at subcritical temperatures was investigated.The results showed the reaction temperature had a significant impact on kanamycin degradation.The degradation half-life(t1/2)was shortened by 87.17-fold when the hydrothermal treatment temperature was increased from 100℃ to 180℃.The t1/2 of kanamycin in the N2 process was extended by 1.08-1.34-fold compared to that of the corresponding air process at reaction temperatures of 140-180℃,indicating that the reactions during hydrothermal treatment process mainly include oxidation and hydrolysis.However,the contribution of hydrolysis was calculated as 75%-98%,which showed hydrolysis played a major role during the process,providing possibilities for the removal of kanamycin from production wastewaters with high-concentration organic matrices.Five transformation products with lower antibacterial activity than kanamycin were identified using UPLC-QTOF-MS analysis.More importantly,hydrothermal treatment could remove 97.9%of antibacterial activity(kanamycin EQ,1,109 mg/L)from actual production wastewater with CODCr around 100,000 mg/L.Furthermore,the methane production yield in anaerobic inhibition tests could be increased about 2.3 times by adopting the hydrothermal pretreatment.Therefore,it is concluded that hydrothermal treatment as a pretreatment technology is an efficient method for removing high-concentration hard-to-hydrolyze antibiotic residues from wastewater with high-concentration organic matrices.

Preparation and Characterization of Nanotitanium Dioxide Coating Film Doped with Fe^(3+) Ions on Porous Ceramic

The nanotitanium dioxide （TiO2） photocatalytic and porous ceramic filtering technique is one of the advanced methods to effectively treat organic wastewater. The TiO2 sol doped with Fe^3＋ ions was prepared by sol-gel processing. The influences of the process conditions of coating nanophotocatalytic material- Fe^3＋-TiO2 film on the surface of porous ceramic filter by dipping-lift method on the performance of porous ceramic filter were studied. The porous ceramic filters have two functions at the same time, filtration and photocatalytic degradation. The results of this study showed that the pH and viscosity of the sol, amount of Fe^3＋ ions doped as well as the coating times greatly affect the quality of coating film, the performance parameters and the photocatalytic activity of the porous ceramic filter. When the pH of the sol is 3-4, the viscosity is about 6 mPa.S, the amount of doped Fe^3＋ ions is about 2.0 g/L, the porous ceramic filter has been shown to have the best filtering performance and photocatalytic activity. In this condition, the porosity of porous ceramic is about 42.5%, the pore diameter is 8-10μm. The degradation of methyl-orange is 74.76% under lighting for 120 rain.

Exploring the cooperation effect of DBD byproducts and Ag/TiO_2 catalyst for water treatment in an APPJ system

In this paper,the collective effects of combining heterogeneous Ag/TiO2 nanocomposite catalyst with the byproducts（primarily the irradiation and the O3 species） of an atmospheric pressure plasma jet（APPJ） system on the degradation of methyl orange（MO） were explored.The heterostructured Ag/TiO2 nanocomposite was achieved via decorating the Ag quantum dots（QDs） on the commercially available TiO_2catalyst（P25） through a hydrothermal method.The x-ray diffraction analysis of the nanocomposite catalyst showed the diffraction peaks at 44.3°,64.4°,and 77.5°,corresponding to the Ag planes of（200）,（220） and（311）,respectively.The high resolution transmission electron microscope characterization of the nanocomposite catalyst indicated that the Ag QDs with an average diameter of 5 nm were homogeneously distributed on the P25 surface.The experimental results on the MO photodegradation showed that the APPJ irradiation had a marginal effect on the cleavage of the MO molecules.When the Ag/TiO2 nanocomposite catalyst was used,the photodegradation rate of MO increased about 5 times.When both the APPJ byproducts and the Ag/TiO2 nanocomposite catalyst were used,however,over 90% of the MO in the tested solution was cleaved within 15 min,and the energy efficiency was about 0.6 g/k W h.Moreover,an optimal Ag dosage value was determined（6 wt%）.The catalytic results indicated that combining the DBD plasma byproducts with heterogeneous nanocomposite catalysts may be an effect protocol for decreasing the application cost of the DBD system and mitigating the environment pollution by organic dyes in the textile industry.

Selective elimination of chromophoric and fluorescent dissolved organic matter in a full-scale municipal wastewater treatment plant

Effluent organic matter（Ef OM） from municipal wastewater treatment plants potentially has a detrimental effect on both aquatic organisms and humans.This study evaluated the removal and transformation of chromophoric dissolved organic matter（CDOM） and fluorescent dissolved organic matter（FDOM） in a full-scale wastewater treatment plant under different seasons.The results showed that bio-treatment was found to be more efficient in removing bulk DOM（in term of dissolved organic carbon,DOC） than CDOM and FDOM,which was contrary to the disinfection process.CDOM and FDOM were selectively removed at various stages during the treatment.Typically,the low molecular weight fractions of CDOM and protein-like FDOM were more efficiently removed during bio-treatment process,whereas the humic-like FDOM exhibited comparable decreases in both bio-treatment and disinfection processes.Overall,the performance of the WWTP was weak in terms of CDOM and FDOM removal,resulting in enrichment of CDOM and FDOM in effluent.Moreover,the total removal of the bulk DOM（P 〈 0.05） and the protein-like FDOM（P 〈 0.05） displayed a significant seasonal variation,with higher removal efficiencies in summer,whereas removal of CDOM and the humic-like FDOM showed little differences between summer and winter.In all,the results provide useful information for understanding the fate and transformation of DOM,illustrating that sub-fractions of DOM could be selectively removed depending on treatment processes and seasonality.

Algal uptake of dissolved organic nitrogen in wastewater treatment plants

The algal uptake of dissolved organic nitrogen （DON） in the anaerobic-anoxic-oxic （A20） process was investigated in this study. Anaerobic, aerobic and effluent DON samples from two wastewater treatment plants （WWTPs） were separated into hydrophilic and hydrophobic fractions using a DAX-8 resin coupled with an anion exchange resin and a nanofiltration （NF） pretreatment Hydrophilic DON accounted for 66.66%-88.74% of the entire DON for the two plants evaluated. After a 1S-day incubation, 16.95%-91.75% DON was bioavailable for algal growth, and untreated samples exhibited higher DON bioavailability, with 52.83% DON average uptake rates, compared with the hydrophilic and hydrophobic fractions （45.53% and 44.40%, respectively） because the pretreatment caused the inorganic salt to be resistant to algae. Anaerobic untreated samples, hydrophilic fractions and hydrophobic fractions showed higher DON reduction rates and higher biomass accumulation compared with the other DON fractions due to the decomposition of resistant organics by anaerobic and anoxic bacteria. DON in aerobic and effluent samples of plant A was more bioavailable than that of plant B with usages of 27.49%-55.26% DON. DON bioavailability in the anaerobic-anoxic-oxic process decreased in the following order： anaerobic 〉 effluent 〉 aerobic. The DON contents were reduced after anaerobic treatment in the two plants. The EEM-PARAFAC model identified three DON components, including two humic acid-like substances and one protein-like substance in plant A and two protein-like substances and one humic acid-like substance in plant B.

Bioavailability of wastewater derived dissolved organic nitrogen to green microalgae Selenastrum capricornutum,Chlamydomonas reinhardtii,and Chlorella vulgaris with/without presence of bacteria

Effluent dissolved organic nitrogen（DON） is problematic in nutrient sensitive surface waters and needs to be reduced to meet demanding total dissolved nitrogen discharge limits.Bioavailable DON（ABDON） is a portion of DON utilized by algae or algae ＋ bacteria,while biodegradable DON（BDON） is a portion of DON decomposable by bacteria.ABDON and BDON in a two-stage trickling filter（TF） wastewater treatment plant was evaluated using three different microalgal species,Selenastrum capricornutum,Chlamydomonas reinhardtii and Chlorella vulgaris and mixed cultured bacteria.Results showed that up to80% of DON was bioavailable to algae or algae ＋ bacteria inoculum while up to 60% of DON was biodegradable in all the samples.Results showed that C.reinhardtii and C.vulgaris can be used as a test species the same as S.capricornutum since there were no significant differences among these three algae species based on their ability to remove nitrogen species.

Effect of different molecular weight organic components on the increase of microbial growth potential of secondary effluent by ozonation

Ozonation has been widely applied in advanced wastewater treatment. In this study, the effect of ozonation on assimilable organic carbon （AOC） levels in secondary effluents was investigated, and AOC variation of different molecular weight （MW） organic components was analyzed. Although the removal efflciencies were 47%-76% and 94%-100% for UV2s4 and color at ozone dosage of 10 mg/L, dissolved organic carbon （DOC） in secondary effluents was hardly removed by ozonation. The AOC levels increased by 70%-780% at an ozone dosage range of 1-10 mg/L. AOC increased significantly in the instantaneous ozone demand phase, and the increase in AOC was correlated to the decrease in UV254 during ozonation. The results of MW distribution showed that, ozonation led to the transformation of larger molecules into smaller ones, but the increase in low MW （〈1 kDa） fraction did not contribute much to AOC production. The change of high MW （〉100 kDa and 10-100 kDa） fractions itself during ozonation was the main reason for the increase of AOC levels. Furthermore, the oxidation of organic matters with high MWs （〉 100 kDa and 10-100 kDa） resulted in more AOC production than those with low MWs （1-10 kDa and 〈1 kDa）. The results indicated that removing large molecules in secondary effluents could limit the increase of AOC during ozonation.

Wastewater treatment plants and release:The vase of Odin for emerging bacterial contaminants,resistance and determinant of environmental wellness

Municipal wastewater consists of a downstream collection of flushed sewage(without solid waste),other household runoffs,industrial runoffs,hospital runoffs and agricultural runoffs through an underground pipe before treatment.A runoff collection system called the wastewater treatment plant(WWTPs)treats such wastewater before release into environment following specific regulatory standards.This years-long practice has been improved upon by adding end-to-end pipe technologies with a view to enhancing the quality of effluent released.However,effluents released into the environment from design/application of WWTPs appear to contain emerging contaminants of both biotic and abiotic nature.The observation of chemical contaminants,antibiotic resistant bacteria(ARB),antibiotic resistant genes(ARGs)and diverse pathogenic bacteria genera in wastewater works release further affirm the abundance of such emerging contaminants.As a result,the government and water regulatory organizations in various part of the world are considering the removal of water reuse act from recycling policy/process.Current global debate is focused on questions about sustenance of any improved additional treatment level;effect of energy consumption by added treatment stage and its impact on the environmental wellness as contaminants borne wastewater is consistently released.Technological advancement/research suggests implementation of newer innovative infrastructural systems(NIIS)such as Mobbing Bed Biofilm Rector(MBBR),for wastewater effluent management which involve addition of newer wastewater treatment stages.This review addressed current pitfalls including wastewater microbiota of high epidemiological/public health relevance and affirms the need for such improvement which requires modification of ongoing institutional framework with a view to encourage implementation of NIIS for an improved effluent release.Exploiting the advances of microbial biofilming and the potentials of microbial biofueling as discussed in various section promises a future of robust environmental system,stable operational standard,release of quality effluent and sustainable management of wastewater works.Application of the aforementioned would enhance qualityWWTPs release and in-defacto reduces spread of ARB/ARGs as well as impacts both the environment wellness and public health.

Application of high OLR-fed aerobic granules for the treatment of low-strength wastewater: Performance, granule morphology and microbial community

Aerobic granules, pre-cultivated at the organic loading rate （OLR） of 3.0 kg COD/（m3 ·day）, were used to treat low-strength wastewater in two sequencing batch reactors at low OLRs of 1.2 and 0.6 kg COD/（m3 ·day）, respectively. Reactor performance, evolution of granule morphology, structure and microbial community at low OLRs under long-term operation （130 days） were investigated. Results showed that low OLRs did not cause significant damage to granule structure as a dominant granule morphology with size over 540 μm was maintained throughout the operation. Aerobic granules at sizes of about 750 μm were finally obtained at the low OLRs. The granule reactors operated at low OLRs demonstrated effective COD and ammonia removals （above 90%）, smaller granule sizes and less biomass. The contents of extracellular polymeric substances in the granules were decreased while the ratios of exopolysaccharide/exoprotein were increased （above 1.0）. The granules cultivated at the low OLRs showed a smoother surface and more compact structure than the seeded granules. A significant shift in microbial community was observed but the microbial diversity remained relatively stable. Confocal Laser Scanning Microscopy observation showed that the live cells were spread throughout the whole granule, while the dead cells were mainly concentrated in the outer layer of the granule, and the proteins, polysaccharides and lipids were mainly located in the central regime of the granule. In conclusion, granules cultivated at high OLRs show potential for treating low-strength organic wastewater steadily under long-term operation.

Positively charged microporous ceramic membrane for the removal of Titan Yellow through electrostatic adsorption

To develop a depth filter based on the electrostatic adsorption principle, positively charged microporous ceramic membrane was prepared from a diatomaceous earth ceramic membrane.The internal surface of the highly porous ceramic membrane was coated with uniformly distributed electropositive nano-Y2O3 coating. The dye removal performance was evaluated through pressurized filtration tests using Titan Yellow aqueous solution. It showed that positively charged microporous ceramic membrane exhibited a flow rate of 421 L/（m^2·hr） under the trans-membrane pressure of 0.03 bar. Moreover it could effectively remove Titan Yellow with feed concentration of 10 mg/L between pH 3 to 8. The removal rate increased with the enhancement of the surface charge properties with a maximum rejection of 99.6%. This study provides a new and feasible method of removing organic dyes in wastewater. It is convinced that there will be a broad market for the application of charged ceramic membrane in the field of dye removal or recovery from industry wastewater.