We report a simple hole-blocking material （biphenyl-3,3＇-diyl）bis（diphenylphosphine oxide） （BiPh-m-BiDPO） based on our recent advance. The bis（phosphine oxide） compound shows HOMO/LUMO levels of ∽-6.71/- 2.5...We report a simple hole-blocking material （biphenyl-3,3＇-diyl）bis（diphenylphosphine oxide） （BiPh-m-BiDPO） based on our recent advance. The bis（phosphine oxide） compound shows HOMO/LUMO levels of ∽-6.71/- 2.51 eV. Its phosphorescent spectrum in a solid film features two major emission bands peaking at 2.69 and 2.4eV, corresponding to 0-0 and 01 vibronic transitions, respectively. The measurement of the electron-only devices reveals that BiPh-m-BiDPO possesses electron mobility of 2.28 × 10^-9-3.22× 10^-8cm2 V-1s-1 at E = 2- 5 × 10^5 V/cm. The characterization of the sky blue fluorescent and red phosphorescent pin organic light-emitting diodes （OLEDs） utilizing BiPh-m-BiDPO as the hole blocker shows that its shallow LUMO level as well as the low electron mobility affects significantly the power efficiency and hence operational stability, relative to the luminous efficiency, especially at high luminance. In combination with our recent results, the present study provides an indepth insight on the molecular structure-property correlation in the organic phosphinyl-containing hole-blocking materials.展开更多
Recently, perylene diimide （PDI） derivatives were attractive as the electron-deficient acceptor materials in non-fullerene organic solar cells since Tang first used a single PDI compound as the n-type semiconductor ...Recently, perylene diimide （PDI） derivatives were attractive as the electron-deficient acceptor materials in non-fullerene organic solar cells since Tang first used a single PDI compound as the n-type semiconductor to fabricate photovoltaic devices in 1986, which achieved a power conversion efficiency of 1%. Beside the monomeric PDIs, the linear and three dimensional （3D） PDl-based small molecular acceptors have also made great achievements with the power conversion efficiencies over 9.0% in single- junction polymer solar cells, and over 10.0% in tandem solar cells. The excellent device performance can be realized by forming suitable twisted structure, developing suitable donor materials and optimizing device technologies. In this review, we summarize the recent development of PDl-based small molecular non-fullerene acceptors in non-fullerene organic solar cells, including molecular design strategies and structure-property relationships.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No U1301243the National Key Research and Development Program of China under Grant No 2016YFB0400701
文摘We report a simple hole-blocking material （biphenyl-3,3＇-diyl）bis（diphenylphosphine oxide） （BiPh-m-BiDPO） based on our recent advance. The bis（phosphine oxide） compound shows HOMO/LUMO levels of ∽-6.71/- 2.51 eV. Its phosphorescent spectrum in a solid film features two major emission bands peaking at 2.69 and 2.4eV, corresponding to 0-0 and 01 vibronic transitions, respectively. The measurement of the electron-only devices reveals that BiPh-m-BiDPO possesses electron mobility of 2.28 × 10^-9-3.22× 10^-8cm2 V-1s-1 at E = 2- 5 × 10^5 V/cm. The characterization of the sky blue fluorescent and red phosphorescent pin organic light-emitting diodes （OLEDs） utilizing BiPh-m-BiDPO as the hole blocker shows that its shallow LUMO level as well as the low electron mobility affects significantly the power efficiency and hence operational stability, relative to the luminous efficiency, especially at high luminance. In combination with our recent results, the present study provides an indepth insight on the molecular structure-property correlation in the organic phosphinyl-containing hole-blocking materials.
基金supported by the National Science Foundation of China (NSFC, Nos. 51573107, 91633301 and 21432005)the Foundation of State Key Laboratory of Polymer Materials Engineering (No. sklpme 2017-2-04)
文摘Recently, perylene diimide （PDI） derivatives were attractive as the electron-deficient acceptor materials in non-fullerene organic solar cells since Tang first used a single PDI compound as the n-type semiconductor to fabricate photovoltaic devices in 1986, which achieved a power conversion efficiency of 1%. Beside the monomeric PDIs, the linear and three dimensional （3D） PDl-based small molecular acceptors have also made great achievements with the power conversion efficiencies over 9.0% in single- junction polymer solar cells, and over 10.0% in tandem solar cells. The excellent device performance can be realized by forming suitable twisted structure, developing suitable donor materials and optimizing device technologies. In this review, we summarize the recent development of PDl-based small molecular non-fullerene acceptors in non-fullerene organic solar cells, including molecular design strategies and structure-property relationships.
