COMPARISON OF HTC METHOD AND UV/PERSULPHATE METHOD TO DETERMINE COLLOIDAL ORGANIC CARBON IN SEAWATER

The application of cross flow ultrafiltration(CFF) techniques to separate colloidal organic carbon(COC) from truly dissolved organic carbon(TDOC) was investigated; COC and TDOC were determined by the high temperature combustion method(HTC) and UV/persulphate method. It was found that CFF can quantitatively separate COC from seawater. The determination results by the HTC and UV/persulphate method for COC and TDOC showed little difference, which suggested that the oxidation efficiency of the two methods are identical. Colloidal particles have no remarkable influence on the oxidation efficiency of the UV/persulphate method.

Effect of Different Irrigation Methods on Dissolved Organic Carbon and Microbial Biomass Carbon in the Greenhouse Soil

The objective of this study was to investigate the contents and distribution of dissolved organic carbon （DOC） and microbial biomass carbon （MBC） at 0-100 cm soil depth under three irrigation treatments, viz., subsurface, drip and furrow irrigation in the greenhouse soil. The soil samples were collected at different depths （0-100 cm）, and the contents of soil total organic carbon （TOC）, DOC and MBC were analysed. The experiment was conducted for 10 yr, during which period the application of fertilizers and crop management practices were kept identical. The results showed that the contents of TOC, DOC and MBC were significantly affected by different irrigation regimes, decreased with the increase of soil depth. TOC at 0-10 and 80-100 cm soil depths followed the order of furrow irrigation 〉 subsurface irrigation 〉 drip irrigation, whereas at the depth of 10-80 cm followed the order of subsurface irrigation 〉 furrow irrigation 〉 drip irrigation. DOC and MBC contents at 0-100 cm soil depths followed the order of furrow irrigation 〉 drip irrigation 〉 subsurface irrigation, and drip irrigation 〉 furrow irrigation 〉 subsurface irrigation, respectively. The ratios of DOC and MBC to TOC accounted for 4.98-12.87% and 1.48-2.82%, respectively, which were the highest in the drip irrigation treatment, followed were in the furrow irrigation treatment, and the lowest in subsurface irrigation treatment. There were significant positive correlations among the contents of DOC, MBC and TOC in all irrigation treatments. The furrow irrigation facilitated the accumulation of TOC and DOC, while drip irrigation increased the MBC. The content of TOC and the ratios of DOC to TOC were the lowest in subsurface irrigation treatment.

Modified Method for Estimating Organic Carbon Density in Discontinuous Karst Soil Using Ground-Penetrating Radar and Geostatistics

The conventional method which assumes the soil distribution is continuous was unsuitable for estimating soil organic carbon density(SOCD) in Karst areas because of its discontinuous soil distribution. The accurate estimation of SOCD in Karst areas is essential for carbon sequestration assessment in China. In this study, a modified method,which considers the vertical proportion of soil area in the profile when calculating the SOCD, was developed to estimate the SOCD in a typical Karst peak-cluster depression area in southwest China. In the modified method, ground-penetrating radar(GPR) technology was used to detect the distribution and thickness of soil. The accuracy of the method was confirmed through comparison with the data obtained using a validation method, in which the soil thickness was measured by excavation. In comparison with the conventional method and average-soil-depth method,the SOCD estimated using the GPR method showed the minimum relative error with respect to that obtained using the validation method. At a regional scale, the average SOCDs at depths of 0-20 cm and 0-100 cm, which were interpolated by ordinary kriging,were 1.49(ranging from 0.03-5.65) and 2.26(0.09-11.60) kgm-2based on GPR method in our study area(covering 393.6 hm2), respectively. Therefore, the modified method can be applied on the accurate estimation of SOCD in discontinuous soil areas such as Karst regions.

Effects of Tillage Methods on Soil Organic Carbon and Total Nitrogen Content in the Loess Plateau

In order to determine whether long-term no-tillage operation in the loess plateau threatens soil fertility and crop yield,a suitable high-yield and efficient tillage technology system was established.In the Changwu loess plateau agri-Gecological experiment station of the Northwest A&F University of Changwu County,Shaanxi Province,the no-tillage experimental field for three consecutive years was selected.In September 2015,no-tillage,tillage,and rotary tillage were carried out before winter wheat was sowed.After the harvest of winter wheat in2016,soil organic carbon,total nitrogen and wheat yield in 0-30 cm soil layers under different tillage methods were analyzed.The results showed that the soil organic carbon and total nitrogen contents in the 0-30 cm soil layer decreased along the profile under the three tillage methods.In this study,the soil organic carbon and total nitrogen content in the 0-10 cm soil layer under different tillage methods were no-tillage>rotary tillage>tillage,the actual yield of winter yield in one hectare was tillage>rotary tillage>no-tillage,and there was significant difference in the actual yield of winter wheat only between the no-tillage and tillage.

Pitfalls of acid leaching method for determining organic and inorganic carbon contents in marine sediments

Organic and inorganic carbon contents of marine sediments are important to reconstruct marine productivity,global carbon cycle, and climate change. A proper method to separate and determine organic and inorganic carbons is thus of great necessity. Although the best method is still disputable, the acid leaching method is widely used in many laboratories because of its ease-of-use and high accuracy. The results of the elemental analysis of sediment trap samples reveal that organic and inorganic carbon contents cannot be obtained using the acid leaching method, causing an infinitely amplified error when the carbon content of the decarbonated sample is 12%±1% according to a mathematical derivation. Acid fumigation and gasometric methods are used for comparison, which indicates that other methods can avoid this problem in organic carbon analysis. For the first time, this study uncovers the pitfalls of the acid leaching method, which limits the implication in practical laboratory measurement, and recommends alternative solutions of organic/inorganic carbon determination in marine sediments.

Estimating Hansen solubility parameters of organic pigments by group contribution methods

The Hansen solubility parameters(HSP)are frequently used for solvent selection and characterization of polymers,and are directly related to the suspension behavior of pigments in solvent mixtures.The performance of currently available group contribution(GC)methods for HSP were evaluated and found to be insufficient for computer-aided product design(CAPD)of paints and coatings.A revised and,for this purpose,improved GC method is presented for estimating HSP of organic compounds,intended for organic pigments.Due to the significant limitations of GC methods,an uncertainty analysis and parameter confidence intervals are provided in order to better quantify the estimation accuracy of the proposed approach.Compared to other applicable GC methods,the prediction error is reduced significantly with average absolute errors of 0.45 MPa^(1/2),1.35 MPa^(1/2),and 1.09 MPa^(1/2) for the partial dispersion(δD),polar(δP)and hydrogen-bonding(δH)solubility parameters respectively for a database of 1106 compounds.The performance for organic pigments is comparable to the overall method performance,with higher average errors forδD and lower average errors forδP andδH.

Treated results study on organic substance and ammonia from coke plant wastewater by SBR method in different operating mode and aeration time conditions

In this paper, a research was made on the treatment of distillation ammonia wastewater from Tai'an Coke-Plant by SBR(sequencing batch reactors). The feasibility and cost effectiveness was tested. Performance of SBR process treating organic substance and ammonia was presented for different operating pattern and aeration time. The mechanism of the simultaneous nitrification and denitrification from coke plant were analysed on SBR process.

Evaluation of working fluids for organic Rankine cycles using group-contribution methods and second-law-based models

The group-contribution (GC) methods suffer from a limitation concerning to the prediction of process-related indexes, e.g., thermal efficiency. Recently developed analytical models for thermal efficiency of organic Rankine cycles (ORCs) provide a possibility of overcoming the limitation of the GC methods because these models formulate thermal efficiency as functions of key thermal properties. Using these analytical relations together with GC methods, more than 60 organic fluids are screened for medium-low temperature ORCs. The results indicate that the GC methods can estimate thermal properties with acceptable accuracy (mean relative errors are 4.45%-11.50%);the precision, however, is low because the relative errors can vary from less than 0.1% to 45.0%. By contrast, the GC-based estimation of thermal efficiency has better accuracy and precision. The relative errors in thermal efficiency have an arithmetic mean of about 2.9% and fall within the range of 0-24.0%. These findings suggest that the analytical equations provide not only a direct way of estimating thermal efficiency but an accurate and precise approach to evaluating working fluids and guiding computer-aided molecular design of new fluids for ORCs using GC methods.

Virtual Organization Information Systems and its Reengineering for Agile Manufacturing

It is now possible to organize globally while worki ng locally: Information technologies like e-mail, the Internet, and video confere ncing to the desktop permit tight coordination of geographically dispersed worke rs across time zones and cultures. Companies are not limited to physical locatio ns for providing products and services. Networked information systems are allowi ng companies to coordinate their geographically distributed capabilities as virt ual organizations. In order for organizations to succeed, they must be able to r espond with agility in a geographically dispersed environment. The core for a vi rtual organization to increase the utilization rate of resources to the maxi mum and to make full use of the transient market opportunities lies in how to br ing the potential of information technology into play. Based on the philosophy o f agile manufacturing, this paper analyses the basic concepts and connotation of Virtual Organization Information systems(VOIS). VOIS is an information system composed of some independent information subsystems that are autonomous, collab orative and belong to umpty organizations respectively. VOIS support the operati on of virtual organization, and automate the information flow across organizatio nal boundaries. Such systems have capabilities as rapid construction, quick oper ation, and agile reengineering and swift adaptability. Differences between VOIS and traditional enterprise information systems are analyzed. On the basis of ana lyzing the structure of VOIS, an abstract hierarchical structure of VOIS is prop osed using object-oriented method. Reengineering ideology and methods of VOIS a re also explored in light of the three layers structure.

Investigation on heat-transfer-coefficient between aluminum alloy and organic/inorganic sand mold based on inverse method

A kind of cylinder sand mold was designed to investigate the heat-transfer-coefficients（HTCs） between aluminum alloy and organic/inorganic binder bonded sand mold during the solidification processes. Temperature during the solidification process was recorded and input into the simulation software. The inverse model of MAGMA was used to calculate the HTC based on the actual temperature. Results show that the temperature of the inorganic sand mold increased faster than the organic sand mold; while the temperature of the casting part with the inorganic sand mold decreased faster. The optimal HTCs between Al and the organic/inorganic sand mold are confirmed to be 300 to 700 and 1000 to 1800 W·m-2·K-1, respectively, along with the change of solid-liquid phase line. The simulated temperature curves show the same trend as the measured ones. The maximum deviation between the two temperature curves are 17.32 °C and 18.77 °C for castings by inorganic and organic sand molds.

Synthesis strategies of covalent organic frameworks: An overview from nonconventional heating methods and reaction media

Covalent organic frameworks(COFs), as an emerging class of porous crystalline materials constructed by covalent links between the building monomers, have gained tremendous attention. Over the past 15 years, COFs have made rapid progress and substantial development in the chemistry and materials fields. However, the synthesis of COFs has been dominated by solvothermal methods for a long time and it usually involves high temperature, high pressure and toxic organic solvents, which created many challenges for environmental considerations. Recently,the exploration of new approaches for facile fabrication of COFs has aroused extensive interest. Hence, in this review, we comprehensively describe the synthetic strategies of COFs from the aspects of nonconventional heating methods and reaction media. In addition, the advantages,limitations and properties of the preparation methods are compared. Finally, we outline the main challenges and development prospects of the synthesis of COFs in the future and propose some possible solutions.

Preparation of PLA and PLGA nanoparticles by binary organic solvent diffusion method

The nanoparticles of polylactide (PLA) and poly(lactide-co-glycolide) (PLGA) were prepared by the bi-nary organic solvent diffusion method. The yield, particle size and size distribution of these nanoparticles wereevaluated. The yield of nanoparticles prepared by this method is over 90%, and the average size of the nanoparticlesis between 130-180 nm. In order to clarify the effect of the organic solvent used in the system on nanoparticle yieldand size, the cloud points of PLA and PLGA were examined by cloud point titration. The results indicate that theyields of nanoparticles increase with the increase of ethanol in the acetone solution and attain the maximum at thecloud point of ethanol, while the size of nanoparticles decreases with the increase of ethanol in the acetone solutionand attains the minimum at the cloud point of ethanol. The optimal composition ratio of binary organic solvents coin-cides to that near the cloud point and the optimal condition of binary organic solvents can be predicted.

Surgical organ displacement: what is the best “materials and methods” for proton radiotherapy?

In the mid 1940s, Robert Wilson （1） hypothesized that a highly localized deposition of energy from a proton beam could be used to increase the radiation dose to tumors while minimizing radiation to adjacent normal tissues. The depth- dose distribution of a proton beam differs significantly from that of a photon beam. Protons show increasing energy deposition with penetration distance, reaching a maximum- named the Bragg peak-near the end of the range of the proton beam. In front of the Bragg peak, the dose level is modest compared to photon beams; beyond the Bragg peak, the dose decreases to nearly zero. By choosing the appropriate proton beam energy, the depth of the Bragg peak can be adjusted to match the depth and extent of the target volume. Therefore, excellent conformality can be achieved, in contrast to conventional or intensity-modulated radiotherapy （IMRT）.

Microplastics in Marine Environment: Occurrence, Distribution, and Extraction Methods in Marine Organisms

The pervasive presence of microplastics in marine environments has raised significant concerns. This review addresses the pressing issue of microplastic pollution in marine ecosystems and its potential implications for both the environment and human health. It outlines the current state of microplastic occurrence, distribution, and extraction methods within marine organisms. Microplastics have emerged as a significant environmental concern due to their harmful effects on ecosystems and their potential human health risks. These particles infiltrate marine environments through runoff and atmospheric deposition, ultimately contaminating beaches and posing threats to marine life. Despite the gravity of this issue, there has been limited research on the presence and distribution of microplastics in marine organisms. This review aims to bridge this knowledge gap by comprehensively examining the occurrence, distribution, and various extraction methods used to detect microplastics in marine organisms. It emphasizes the urgent need for targeted measures to manage microplastic pollution, highlights the significant role of human activities in contributing to this problem, and underscores the importance of reducing human-induced pollution to safeguard marine ecosystems. While this paper contributes to the understanding of microplastic pollution in marine environments and underscores the critical importance of taking action to protect marine organisms and preserve our oceans for future generations, it also emphasizes that, in effectively tackling the microplastic problem, a well-coordinated approach is essential, involving research initiatives, policy adjustments, public involvement, and innovative technologies. Crucially, prompt and resolute responses must exist to counteract the escalating peril posed by microplastics to the oceans and the global environment.

The Preliminary Study on the Performance Appraisement about the Logistics Network Organization

How the performance in the course of implementing the logistics network organization is, and how the benefit level is produced, are undoubtedly focuses that cooperative parties pay close attention to, and the key to the network organization, too. The research on the performance appraisement about the network organization is not only very necessary, but also very important. This paper describes the characteristics of the performance appraisement about the logistics network organization, and sets up the evaluation index through analyzing the principle of constituting the logistics network organization＇s performance index system.

Induction of Internal Capacitance Effect in Performance Measurement of OPV （Organic Photovoltaic） Device by RTOSM （Real-Time One-Sweep Method）

The advantages of OPV （organic photovoltaic） are low cost, little pollution and flexible. But challenge for OPV manufacture still is lacking of accurately performance measurement due to capacitance issue. Firstly, characterization of OPV requires considering the slowly temporal response due to capacitance effect, and the relative I-V （current-voltage） curves are strongly dependent on the voltage sweep direction, even for the sweep time only in few seconds or less. Secondly, the IPCE （incident photon-to-electron conversion efficiency） also shows the slowly temporal response due to capacitance effect and is dependent on the wavelength of the incident light. Furthermore, the related features for measuring I-V curves are more sensitive with temperature due to non-linear characteristics issue, but current IPCE spectra of OPV are similar to that happened in conventional crystalline Si or amorphous silicon devices. In this work, we developed a RTOSM （real-time one-sweep method） applied both in I-V and IPCE to analysis different electronic transport materials, and result showed this new approach proposed a good way to slow down testing time and having better accuracy for OPV measurement by eliminating acceptance effect instantly.

Organic Melt Crystallization as a Method for Synthesis of Supramolecular Complexes

The most simple method for solventless synthesis of supramolecular complex of CMCR·2BPY·BZP, [CMCR = C-methylcalix[4]resorcinarene, BPY = 4,4'-bipyridine, BZP = benzophenone], is proposed. Although CMCR by itself is high melting point compound (above 300°C), CMCR was found to be dissolved in melt mixture of BPY and BZPeven below 120°C. In the mixture of the three components, the reaction occurs to form CMCR·2BPY·BZP supramolecular complex.

Advanced Technologies for Volatile Organic Compound (VOC) Emission Treatment: An Overview

This paper presents a comprehensive overview of various advanced technologies employed in the treatment of volatile organic compounds(VOCs),which are crucial pollutants in industrial emissions.The study explores different methods,including direct combustion,thermal combustion,catalytic combustion,low-temperature plasma purification,photocatalytic purification,membrane separation,and adsorption methods.Each technology is critically analyzed for its operational principles,efficiency,and applicability under different conditions.Special attention is given to adsorption concentration and catalytic combustion parallel method,highlighting its efficiency in treating low-concentration,high-volume VOC emissions.The paper also delves into the advantages and limitations of each method,providing insights into their effectiveness in various industrial scenarios.The study aims to offer a detailed guide for selecting appropriate VOC treatment technologies,contributing to enhanced environmental protection and sustainable industrial practices.

融合相似预报方法在陇东南短期强降水预报中的应用

基于逐步过滤相似法和自组织映射(SOM)神经网络方法,提出了一种融合相似预报方法。利用ECMWF模式预报产品、ERA5再分析资料和地面气象台站观测数据,使用该方法对2021-2022年陇东南地区开展了时效为72 h的强降水预报试验,并对预报效果进行了检验。结果表明:(1)融合相似预报方法的TS评分处于4.5%~9.1%之间,与ECMWF模式预报结果相比表现出一定的优势。随着预报时效的增长,强降水预报的TS评分呈现减小的趋势,其在08:00(北京时,下同)起报的TS评分相对较高。(2)相比于单独使用逐步过滤相似预报,融合相似预报方法的准确性有所提升,并能在一定程度上降低空报率。其中08:00起报和20:00起报的TS评分提高了1.31%和0.63%,而FAR同时下降了2.39%和1.25%。