Co/CoO heterojunction rich in oxygen vacancies introduced by O_(2) plasma embedded in mesoporous walls of carbon nanoboxes covered with carbon nanotubes for rechargeable zinc-air battery

Herein,Co/CoO heterojunction nanoparticles(NPs)rich in oxygen vacancies embedded in mesoporous walls of nitrogen-doped hollow carbon nanoboxes coupled with nitrogen-doped carbon nanotubes(P-Co/CoOV@NHCNB@NCNT)are well designed through zeolite-imidazole framework(ZIF-67)carbonization,chemical vapor deposition,and O_(2) plasma treatment.As a result,the threedimensional NHCNBs coupled with NCNTs and unique heterojunction with rich oxygen vacancies reduce the charge transport resistance and accelerate the catalytic reaction rate of the P-Co/CoOV@NHCNB@NCNT,and they display exceedingly good electrocatalytic performance for oxygen reduction reaction(ORR,halfwave potential[EORR,1/2=0.855 V vs.reversible hydrogen electrode])and oxygen evolution reaction(OER,overpotential(η_(OER,10)=377mV@10mA cm^(−2)),which exceeds that of the commercial Pt/C+RuO_(2) and most of the formerly reported electrocatalysts.Impressively,both the aqueous and flexible foldable all-solid-state rechargeable zinc-air batteries(ZABs)assembled with the P-Co/CoOV@NHCNB@NCNT catalyst reveal a large maximum power density and outstanding long-term cycling stability.First-principles density functional theory calculations show that the formation of heterojunctions and oxygen vacancies enhances conductivity,reduces reaction energy barriers,and accelerates reaction kinetics rates.This work opens up a new avenue for the facile construction of highly active,structurally stable,and cost-effective bifunctional catalysts for ZABs.

Ca and Sr co-doping induced oxygen vacancies in 3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts for boosting low-temperature oxidative coupling of methane

It is urgent to develop catalysts with application potential for oxidative coupling of methane(OCM)at relatively lower temperature.Herein,three-dimensional ordered macro porous(3 DOM)La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)(A_(2)B_(2)O_(7)-type)catalysts with disordered defective cubic fluorite phased structure were successfully prepared by a colloidal crystal template method.3DOM structure promotes the accessibility of the gaseous reactants(O2and CH4)to the active sites.The co-doping of Ca and Sr ions in La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts improved the formation of oxygen vacancies,thereby leading to increased density of surface-active oxygen species(O_(2)^(-))for the activation of CH4and the formation of C2products(C2H6and C2H4).3DOM La_(2-x)Sr_(x)Ce_(2-y)CayO_(7-δ)catalysts exhibit high catalytic activity for OCM at low temperature.3DOM La1.7Sr0.3Ce1.7Ca0.3O7-δcatalyst with the highest density of O_(2)^(-)species exhibited the highest catalytic activity for low-temperature OCM,i.e.,its CH4conversion,selectivity and yield of C2products at 650℃are 32.2%,66.1%and 21.3%,respectively.The mechanism was proposed that the increase in surface oxygen vacancies induced by the co-doping of Ca and Sr ions boosts the key step of C-H bond breaking and C-C bond coupling in catalyzing low-temperature OCM.It is meaningful for the development of the low-temperature and high-efficient catalysts for OCM reaction in practical application.

Tuning the crystalline and electronic structure of ZrO_(2)via oxygen vacancies and nano-structuring for polysulfides conversion in lithium-sulfur batteries

The recent emergence of tetragonal phases zirconium dioxide(ZrO_(2))with vacancies has generated significant interest as a highly efficient and stable electrocatalyst with potential applications in trapping polysulfides and facilitating rapid conversion in lithium-sulfur batteries(LSBs).However,the reduction of ZrO_(2)is challenging,even under strong reducing atmospheres at high temperatures and pressures.Consequently,the limited presence of oxygen vacancies results in insufficient active sites and reaction interfaces,thereby hindering practical implementation.Herein,we successfully introduced abundant oxygen vacancies into ZrO_(2)at the nanoscale with the help of carbon nanotubes(CNTs-OH)through hydrogen-etching at lower temperatures and pressures.The introduced oxygen vacancies on ZrO_(2-x)/CNTs-OH can effectively rearrange charge distribution,enhance sulfiphilicity and increase active sites,contributing to high ionic and electronic transfer kinetics,strong binding energy and low redox barriers between polysulfides and ZrO_(2-x).These findings have been experimentally validated and supported by theory calculations.As a result,LSBs assembled with the ZrO_(2-x)/CNTs-OH modified separators demonstrate excellent rate performance,superior cycling stability,and ultra-high sulfur utilization.Especially,at high sulfur loading of 6 mg cm^(-2),the area capacity is still up to 6.3 mA h cm^(-2).This work provides valuable insights into the structural and functional optimization of electrocatalysts for batteries.

Engineering oxygen vacancies on Tb-doped ceria supported Pt catalyst for hydrogen production through steam reforming of long-chain hydrocarbon fuels

Steam reforming of long-chain hydrocarbon fuels for hydrogen production has received great attention for thermal management of the hypersonic vehicle and fuel-cell application.In this work,Pt catalysts supported on CeO_(2)and Tb-doped CeO_(2)were prepared by a precipitation method.The physical structure and chemical properties of the as-prepared catalysts were characterized by powder X-ray diffraction,scanning electron microscopy,transmission electron microscopy,Raman spectroscopy,H_(2)temperature programmed reduction,and X-ray photoelectron spectroscopy.The results show that Tb-doped CeO_(2)supported Pt possesses abundant surface oxygen vacancies,good inhibition of ceria sintering,and strong metal-support interaction compared with CeO_(2)supported Pt.The catalytic performance of hydrogen production via steam reforming of long-chain hydrocarbon fuels(n-dodecane)was tested.Compared with 2Pt/CeO_(2),2Pt/Ce_(0.9)Tb_(0.1)O_(2),and 2Pt/Ce_(0.5)Tb_(0.5)O_(2),the 2Pt/Ce_(0.7)Tb_(0.3)O_(2)has higher activity and stability for hydrogen production,on which the conversion of n-dodecane was maintained at about 53.2%after 600 min reaction under 700℃at liquid space velocity of 9 ml·g^(-1)·h^(-1).2Pt/CeO_(2)rapidly deactivated,the conversion of n-dodecane was reduced to only 41.6%after 600 min.

Electrospun carbon nanofiber-supported V_(2)O_(3) with enriched oxygen vacancies as a free-standing high-rate anode for an all-vanadium-based full battery

Synergistic regulation of hierarchical nanostructures and defect engineering is effective in accelerating electron and ion transport for metal oxide electrodes.Herein,carbon nanofiber-supported V_(2)O_(3) with enriched oxygen vacancies(OV-V_(2)O_(3)@CNF)was fabricated using the facile electrospinning method,followed by thermal reduction.Differing from the traditional particles embedded within carbon nanofibers or irregularly distributed between carbon nanofibers,the free-standing OV-V_(2)O_(3)@CNF allows for V_(2)O_(3) nanosheets to grow vertically on one-dimensional(1D)carbon nanofibers,enabling abundant active sites,shortened ion diffusion pathway,continuous electron transport,and robust structural stability.Meanwhile,density functional theory calculations confirmed that the oxygen vacancies can promote intrinsic electron conductivity and reduce ion diffusion energy barrier.Consequently,the OV-V_(2)O_(3)@CNF anode delivers a large reversible capacity of 812 mAh g^(-1) at 0.1 A g^(-1),superior rate capability(405 mAh g^(-1) at 5 A g^(-1)),and long cycle life(378 mAh g^(-1) at 5 A g^(-1) after 1000 cycles).Moreover,an all-vanadium full battery(V2O5//OV-V_(2)O_(3)@CNF)was assembled using an OV-V_(2)O_(3)@CNF anode and a V2O5 cathode,which outputs a working voltage of 2.5 V with high energy density and power density,suggesting promising practical application.This work offers fresh perspectives on constructing hierarchical 1D nanofiber electrodes by combining defect engineering and electrospinning technology.

Increased Oxygen Vacancies in CuO-ZnO Snowflake-like Composites Drive the Hydrogenation of CO_(2) to Methanol

Cu/ZnO is widely used in the hydrogenation of carbon dioxide (CO_(2)) to methanol (CH_(3)OH) to improve the lowconversion rate and selectivity generally observed. In this work, a series of In, Zr, Co, and Ni-doped CuO-ZnO catalysts wassynthesized via a hydrothermal method. By introducing a second metal element, the activity and dispersion of the activesites can be adjusted and the synergy between the metal and the carrier can be enhanced, forming an abundance of oxygenvacancies. Oxygen vacancies not only adsorb CO_(2) but also activate the intermediates in methanol synthesis, playing a keyrole in the entire reaction. Co3O4-CuO-ZnO had the best catalytic performance (a CO_(2) conversion rate of 9.17%;a CH_(3)OHselectivity of 92.77%). This study describes a typical strategy for multi-component doping to construct a catalyst with anabundance of oxygen vacancies, allowing more effective catalysis to synthesize CH_(3)OH from CO_(2).

Introducing oxygen vacancies in TiO_(2) lattice through trivalent iron to enhance the photocatalytic removal of indoor NO

The synthesis of oxygen vacancies(OVs)-modified TiO_(2)under mild conditions is attractive.In this work,OVs were easily introduced in TiO_(2)lattice during the hydrothermal doping process of trivalent iron ions.Theoretical calculations based on a novel charge-compensation structure model were employed with experimental methods to reveal the intrinsic photocatalytic mechanism of Fe-doped TiO_(2)(Fe-TiO_(2)).The OVs formation energy in Fe-TiO_(2)(1.12 eV)was only 23.6%of that in TiO_(2)(4.74 eV),explaining why Fe^(3+)doping could introduce OVs in the TiO_(2)lattice.The calculation results also indicated that impurity states introduced by Fe^(3+)and OVs enhanced the light absorption activity of TiO_(2).Additionally,charge carrier transport was investigated through the carrier lifetime and relative mass.The carrier lifetime of Fe-TiO_(2)(4.00,4.10,and 3.34 ns for 1at%,2at%,and 3at%doping contents,respectively)was longer than that of undoped TiO_(2)(3.22 ns),indicating that Fe^(3+) and OVs could promote charge carrier separation,which can be attributed to the larger relative effective mass of electrons and holes.Herein,Fe-TiO_(2)has higher photocatalytic indoor NO removal activity compared with other photocatalysts because it has strong light absorption activity and high carrier separation efficiency.

Optimized CeO_(2) Nanowires with Rich Surface Oxygen Vacancies Enable Fast Li-Ion Conduction in Composite Polymer Electrolytes

Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)transference number of these electrolytes significantly increase the internal resistance and overpotential of the battery.Here,we introduce Gd-doped CeO_(2) nanowires with large surface area and rich surface oxygen vacancies to the polymer electrolyte to increase the interaction between Gd-doped CeO_(2) nanowires and polymer electrolytes,which promotes the Li-salt dissociation and increases the concentration of mobile Li ions in the composite polymer electrolytes.The optimized composite polymer electrolyte has a high Li-ion conductivity of 5×10^(-4)4 S cm^(-1) at 30℃ and a large Li+transference number of 0.47.Moreover,the composite polymer electrolytes have excellent compatibility with the metallic lithium anode and high-voltage LiNi_(0.8)Mn _(0.1)Co_(0.1)O_(2)(NMC)cathode,providing the stable cycling of all-solid-state batteries at high current densities.

Phase separation-hydrogen etching-derived Cu-decorated Cu-Mn bimetallic oxides with oxygen vacancies boosting superior sodium-ion storage kinetics

Understanding the crystal phase evolution of bimetallic oxide anodes is the main concern to profoundly reveal the conversion reaction kinetics and sodium-ion storage mechanisms.Herein,an integrated selfsupporting anode of the Cu-decorated Cu-Mn bimetallic oxides with oxygen vacancies(Ov-BMO-Cu)are in-situ generated by phase separation and hydrogen etching using nanoporous Cu-Mn alloy as selfsacrificial templates.On this basis,we have elucidated the relationship between the phase evolution,oxygen vacancies and sodium-ion storage mechanisms,further demonstrating the evolution of oxygen vacancies and the inhibition effect of manganese oxides as an“anchor”on grain aggregation of copper oxides.The kinetic analyses confirm that the expanded lattice space and increased oxygen vacancies of cycled Ov-BMO-Cu synergistically guarantee effective sodium-ion diffusion and storage mechanisms.Therefore,the Ov-BMO-Cu electrode exhibits higher reversible capacities of 4.04 mA h cm^(-2)at 0.2 mA cm^(-2)after 100 cycles and 2.20 m A h cm^(-2)at 1.0 mA cm^(-2)after 500 cycles.Besides,the presodiated Ov-BMO-Cu anode delivers a considerable reversible capacity of 0.79 m A h cm^(-2)at 1.0 mA cm^(-2)after 60 cycles in full cells with Na_(3)V_(2)(PO_(4))_(3)cathode,confirming its outstanding practicality.Thus,this work is expected to provide enlightenment for designing high-capacity bimetallic oxide anodes.

Adjusting oxygen vacancies in perovskite LaCoO_(3)by electrochemical activation to enhance the hydrogen evolution reaction activity in alkaline condition

Developing highly-active,earth-abundant non-precious-metal catalysts for hydrogen evolution reaction(HER)in alkaline solution would be beneficial to sustainable energy storage.Perovskite oxides are generally regarded as low-active HER catalysts,due to their inapposite hydrogen adsorption and water dissociation.Here,we report a detailed study on perovskite LaCoO_(3)epitaxial thin films as a model catalyst to significantly enhance the HER performance via an electrochemical activation process.As a result,the overpotential for the activation films to achieve a current density of 0.36 m A/cm^(2)is 238 m V,reduced by more than 200 m V in comparison with that of original samples.Structural characterization revealed the activation process dramatically increases the concentration of oxygen vacancies(Vo)on the surface of LaCoO_(3).We established the relationship between the electronic structure induced by Vo and the enhanced HER activity.Further theoretical calculations revealed that the Vo optimizes the hydrogen adsorption and dissociation of water on the surface of LaCoO_(3)thin films,thus improving the HER catalytic activity.This work may promote a deepened understanding of perovskite oxides for HER mechanism by Vo adjusting and a new avenue for designing highly active electrochemical catalysts in alkaline solution.

Tensile stress enhanced dynamic oxygen vacancies on interlayer stretched Bi_(2)O_(2)CO_(3) as pivotal knobs to promote sustainable selective CO_(2) photoreduction

Surface oxygen vacancies(OVs) with abundant localized electrons on bismuth-oxygen based photocatalysts are proved to have the ability to capture and activate CO_(2).However,the surface OVs are easily filled with oxygen-containing species and destroyed,losing their effects as active sites and hindering the subsequent CO_(2)photoreduction.For realistic and sustainable CO_(2)photoreduction,constructing sustainable and stable surface OVs as active sites on photocatalysts is essential.This work shows the synthesis of interlayer stretched Bi_(2)O_(2)CO_(3) ultrathin nanosheets with tensile stress,which are beneficial to continuously generating light-induced dynamic OVs.With sufficient active sites,excellent,stable,and selective photoreduction of CO_(2)to CO under simulated solar light is achieved.The light-induced OVs can reduce the energy barrier of rate-determining step,resulting in the 100% product selectivity.The results presented herein demonstrate the effect of dynamic OVs induced by interlayer tensile strain on catalysts for the enhanced selective CO_(2)photoreduction process.

Plasma-induced Mo-doped Co_(3)O_(4)with enriched oxygen vacancies for electrocatalytic oxygen evolution in water splitting

Heteroatomic substitution and vacancy engineering of spinel oxides can theoretically optimize the oxygen evolution reaction(OER)through charge redistribution and d-band center modification but still remain a great challenge in both the preparation and catalytic mechanism.Herein,we proposed a novel and efficient Ar-plasma(P)-assisted strategy to construct heteroatom Mo-substituted and oxygen vacancies enriched hierarchical spinel Co_(3)O_(4)porous nanoneedle arrays in situ grown on carbon cloth(denoted P-Mo-Co_(3)O_(4)@CC)to improve the OER performance.Ar-plasma technology can efficiently generate vacancy sites at the surface of hydroxide,which induces the anchoring of Mo anion salts through electrostatic interaction,finally facilitating the substitution of Mo atoms and the formation of oxygen vacancies on the Co_(3)O_(4)surface.The P-Mo-Co_(3)O_(4)@CC affords a low overpotential of only 276 mV at 10 mA cm^(−2)for the OER,which is 58 mV superior to that of Mo-free Co_(3)O_(4)@CC and surpasses commercial RuO_(2)catalyst.The robust stability and satisfactory selectivity(nearly 100%Faradic efficiency)of P-Mo-Co_(3)O_(4)@CC for the OER are also demonstrated.Theoreti-cal studies demonstrate that Mo with variable valance states can efficiently regulates the atomic ratio of Co^(3+)/Co^(2+)and increases the number of oxygen vacancies,thereby inducing charge redistribution and tuning the d-band center of Co_(3)O_(4),which improve the adsorption energy of oxygen intermediates(e.g.,*OOH)on P-Mo-Co_(3)O_(4)@CC during OER.Furthermore,the two-electrode OER//HER electrolyzer equipped with P-Mo-Co_(3)O_(4)@CC as anode displays a low operation potential of 1.54 V to deliver a current density of 10 mA cm^(−2),and also exhibits good reversibility and anticurrent fluctuation ability under simulated real energy supply conditions,demonstrating the great potential of P-Mo-Co_(3)O_(4)@CC in water electrolysis.

Effectively Modulating Oxygen Vacancies in Flower‑Likeδ‑MnO_(2)Nanostructures for Large Capacity and High‑Rate Zinc‑Ion Storage

In recent years,manganese-based oxides as an advanced class of cathode materials for zinc-ion batteries(ZIBs)have attracted a great deal of attentions from numerous researchers.However,their slow reaction kinetics,limited active sites and poor electrical conductivity inevitably give rise to the severe performance degradation.To solve these problems,herein,we introduce abundant oxygen vacancies into the flower-likeδ-MnO_(2)nanostructure and effectively modulate the vacancy defects to reach the optimal level(δ-MnO_(2)-x-2.0).The smart design intrinsically tunes the electronic structure,guarantees ion chemisorption-desorption equilibrium and increases the electroactive sites,which not only effectively accelerates charge transfer rate during reaction processes,but also endows more redox reactions,as verified by first-principle calculations.These merits can help the fabricatedδ-MnO_(2)-x-2.0 cathode to present a large specific capacity of 551.8 mAh g^(-1) at 0.5 A g^(-1),high-rate capability of 262.2 mAh g^(-1) at 10 A g^(-1) and an excellent cycle lifespan(83%of capacity retention after 1500 cycles),which is far superior to those of the other metal compound cathodes.In addition,the charge/discharge mechanism of theδ-MnO_(2)-x-2.0 cathode has also been elaborated through ex situ techniques.This work opens up a new pathway for constructing the next-generation high-performance ZIBs cathode materials.

Effect of Na^(+)and Sr^(2+)Substitution on the Formation of the Oxygen Vacancies in Y_(3)Al_(2)Ga_(3)O_(12):Ce^(3+)Phosphor

The low-valence cations Na^(+)and Sr^(2+)were selected as the co-dopants to increase the vacancies concentration in the Y_(2.982)Ce_(0.018)Al_(2)Ga_(3)O_(12)phosphor.The successful incorporation of Na^(+)and Sr^(2+)was confirmed by the X-Ray Difiraction(XRD)results.All the samples show 5d-4f green persistent luminescence of Ce^(3+)after 450 nm excitation.The decay curves demonstrate that the persistent luminescence is efiectively enhanced with Na+and Sr2+doping.The thermoluminescence glow curves also show not only does the trap concentration increase,but also the distribution of trap depths is broadened.In addition,the air-and H_(2)/Ar-annealing treatments were conducted on every as-made sample.The experimental results prove that the increased traps after the Na^(+)/Sr^(2+)doping are mainly attributed to the oxygen vacancies,and the traps have a continuous and broad distribution of trap depths.We hope this work could give new inspiration for designing a high-performance persistent phosphor.

Effect of Calcination Temperature on Surface Oxygen Vacancies and Catalytic Performance Towards CO Oxidation of Co3O4 Nanoparticles Supported on SiO2

Co3O4/SiO2 catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char- acterized with X-ray diffraction （XRD）, laser Raman spectroscopy, X-ray photoelectron spectroscopy （XPS）, temperature-programmed reduction （TPR） and X-ray absorption fine structure （XAFS） spectroscopy. Both XRD and Raman spectroscopy only detect the existence of Co3O4 crystallites in all catalysts. However, XPS results indicate that excess Co2＋ ions are present on the surface of Co3O4 in Co3O4（200）/Si02 as compared with bulk Co3O4. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co3O4 in Co3O4（200）/SiO2, and XAFS results demonstrate that Co3O4 in Co3O4（200）/SIO2 contains excess Co2＋. Increasing calcination temperature results in oxidation of excess Co2＋ and the decrease of the concentration of surface oxygen vacancies, consequently the for- mation of stoichiometric Co3O4 on supported catalysts. Among all Co3O4/SiO2 catalysts, Co3O4（200）/SiO2 exhibits the best catalytic performance towards CO oxidation, demonstrating that excess Co2＋ and surface oxygen vacancies can enhance the catalytic activity of Co3O4 towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silicasupported Co3O4 catalysts and highlight the important role of surface oxygen vacancies on Co3O4.

Porous LaFeO3 nanofiber with oxygen vacancies as an efficient electrocatalyst for N2 conversion to NH3 under ambient conditions

Electrocatalytic N2 reduction to NH3 under ambient conditions is an eco-friendly and sustainable alternative to the traditional Haber-Bosch process. However, inhibited by the high activation barrier of N2, this process needs efficient electrocatalysts to adsorb and activate the N2, enabling the N2 reduction reaction(NRR). Herein, we report that porous LaFeO3 nanofiber with oxygen vacancies acts as an efficient NRR electrocatalyst with abundant active sites to enhance the adsorption and activation of N2. When tested in 0.1 M HCl, such electrocatalyst achieves a high Faradaic efficiency of 8.77% and a large NH3 yield rate of 18.59 μg h–1 mgcat–1.at-0.55 V versus reversible hydrogen electrode. This catalyst also shows high long-term electrochemical stability and excellent selectivity for NH3 formation. Density functional theory calculations reveal that, by introducing oxygen vacancy on LaFeO3, the subsurface metallic ions are exposed with newly localized electronic states near the Fermi level, which facilitates the adsorption and activation of N2 molecules as well as the subsequent hydrogenation reactions.

Enhanced photocatalytic NO removal and toxic NO2 production inhibition over ZIF‐8‐derived ZnO nanoparticles with controllable amount of oxygen vacancies

The controlled introduction of oxygen vacancies(OVs)in photocatalysts has been demonstrated to be an efficient approach for improving the separation of photogenerated charge carriers,and thus,for enhancing the photocatalytic performance of photocatalysts.In this study,a two‐step calcination method where ZIF‐8 was used as the precursor was explored for the synthesis of ZIF‐8‐derived ZnO nanoparticles with gradient distribution of OVs.Electron paramagnetic resonance measurements indicated that the concentration of OVs in the samples depended on the temperature treatment process.Ultraviolet–visible spectra supported that the two‐step calcined samples presented excellent light‐harvesting ability in the ultraviolet‐to‐visible light range.Moreover,it was determined that the two‐step calcined samples presented superior photocatalytic performance for the removal of NO,and inhibited the generation of NO2.These properties could be attributed to the contribution of the OVs present in the two‐step calcined samples to their photocatalytic performance.The electrons confined by the OVs could be transferred to O2 to generate superoxide radicals,which could oxidize NO to the final product,nitrate.In particular,the NO removal efficiency of Z 350‐400(which was a sample first calcined at 350℃ for 2 h,then at 400℃ for 1 h)was 1.5 and 4.6 times higher than that of Z 400(which was one‐step directly calcined at 400℃)and commercial ZnO,respectively.These findings suggested that OV‐containing metal oxides that derived from metal‐organic framework materials hold great promise as highly efficient photocatalysts for the removal of NO.

Zn‐doping mediated formation of oxygen vacancies in SnO2 with unique electronic structure for efficient and stable photocatalytic toluene degradation

To optimize the electronic structure of photocatalyst,a facile one‐step approach is developed for the simultaneous realization of Zn‐doping and surface oxygen vacancies(SOVs)formation on SnO_(2).The Zn‐doped SnO_(2)with abundant SOVs exhibits efficient and stable performance for photocatalytic degradation of toluene under both low and high relative humidity.Experimental and theoretical calculations results show that the synergistic effects of Zn‐doping and SOVs on SnO_(2)can considerably boost the charge transfer and separation efficiency.Utilizing the in situ DRIFTS and theoretical calculations methods,it is revealed that the benzene ring of toluene is opened at benzoic acid on the SnO_(2)surface and selectively at benzaldehyde on the Zn‐doped SnO_(2)surface.This implies that Zn‐doped SnO_(2)photocatalysts shorten the pathway of toluene degradation,and toxic intermediates can be significantly inhibited.This work could provide a promising and sustainable route for safe and efficient removal of aromatic VOCs with photocatalytic technology.

Oxygen vacancies engineering by coordinating oxygen-buffering CeO_(2) with CoO_(x) nanorods as efficient bifunctional oxygen electrode electrocatalyst

CeO_(2)decorated CoOx rod-like hybrid,supported onto holey reduced graphene(CoOx/CeO_(2)/RGO)composite,was fabricated via a surfactant-assisted route.Its corresponding electrocatalytic performance towards oxygen reduction/evolution reactions(ORR and OER)was systematically investigated in alkaline electrolyte.Structural,morphological and compositional studies revealed changes in electronic and surface properties when CeO_(2)was introduced as an oxygen buffer material.The oxygen vacancies effectively enhanced the electrocatalytic activity,while the synergistic effect of co-catalyst CeO_(2),CoOx activecenters,and defective graphene with many voids facilitate the charge/mass transfer,making CoOx/CeO_(2)/RGO an efficient and stable bifunctional electrocatalyst for OER/ORR with△E=0.76 V(△E=E10mAcm.-2OER-E_(1/2).ORR).This parameter is 70 mV and 270 mV lower than CoOx/RGO and the benchmark Pt/C,respectively.In addition,the OER/ORR bifunctionality of CoOx/CeO_(2)/RGO composite outperforms that of Pt/C catalyst in a H2-O_(2)micro fuel cell platform.

Improving visible-light-driven photocatalytic NO oxidation over BiOBr nanoplates through tunable oxygen vacancies

In this work,a series of BiOBr nanoplates with oxygen vacancies(OVs)were synthesized by a solvothermal method using a water/ethylene glycol solution.The number of OVs and facets of BiOBr were tuned by changing the water/ethylene glycol ratio.Although the role of OVs in photocatalysis has been investigated,the underlying mechanisms of charge transfer and reactant activation remain unknown.To unravel the effect of OVs on the reactant activation and photocatalytic NO oxidation process,in situ diffuse reflectance infrared Fourier transform spectroscopy,so‐called DRIFTS,and theoretical calculations were performed and their results combined.The photocatalytic efficiency of the as‐prepared BiOBr was significantly increased by increasing the amount of OVs.The oxygen vacancies had several effects on the photocatalysts,including the introduction of intermediate energy levels that enhanced light absorption,promoted electron transfer,acted as active sites for catalytic reaction and the activation of oxygen molecules,and facilitated the conversion of the intermediate products to the final product,thus increasing the overall visible light photocatalysis efficiency.The present work provides new insights into the understanding of the role of OVs in photocatalysts and the mechanism of photocatalytic NO oxidation.