In order to reduce powder temperature to lower than 100℃ in warm compaction by changing polymer lubricant design, powder flowability, warm compacting behavior, lubricating mode as well as ultimate tensile strength af...In order to reduce powder temperature to lower than 100℃ in warm compaction by changing polymer lubricant design, powder flowability, warm compacting behavior, lubricating mode as well as ultimate tensile strength after sinter-hardening and tempering were investigated systematically. By means of low temperature warm pressing and sintered hardening technique, samples with the sintered densities of 7.407.45g/cm3 and the strengths of 950 1390MPa are achieved as the early compacting pressure is 686735MPa.展开更多
The Na-deficient P3-type layered oxide cathode material usually experience complex in-plane Na^(+)/vacancy ordering rearrangement and undesirable P3-O3 phase transitions in the high-voltage region,leading to inferior ...The Na-deficient P3-type layered oxide cathode material usually experience complex in-plane Na^(+)/vacancy ordering rearrangement and undesirable P3-O3 phase transitions in the high-voltage region,leading to inferior cycling performance.Additionally,they exhibit unsatisfactory stability when exposed to water for extended periods.To address these challenges,we propose a Cu/Ti co-doped P3-type cathode material(Na_(0.67)Ni_(0.3)Cu_(0.03)Mn_(0.6)Ti_(0.07)O_(2)),which effectively mitigates Na^(+)/vacancy ordering and suppresses P3-O3 phase transitions at high voltages.As a result,the as-prepared sample exhibited outstanding cyclic performance,with 81.9%retention after 500 cycles within 2.5–4.15 V,and 75.7%retention after300 cycles within 2.5–4.25 V.Meanwhile,it demonstrates enhanced Na^(+)transport kinetics during desodiation/sodiation and reduced growth of charge transfer impedance(R_(ct))after various cycles.Furthermore,the sample showed superb stability against water,exhibiting no discernible degradation in structure,morphology,or electrochemical performance.This co-doping strategy provides new insights for innovative and prospective cathode materials.展开更多
文摘In order to reduce powder temperature to lower than 100℃ in warm compaction by changing polymer lubricant design, powder flowability, warm compacting behavior, lubricating mode as well as ultimate tensile strength after sinter-hardening and tempering were investigated systematically. By means of low temperature warm pressing and sintered hardening technique, samples with the sintered densities of 7.407.45g/cm3 and the strengths of 950 1390MPa are achieved as the early compacting pressure is 686735MPa.
基金supported by the National Natural Science Foundation of China(Nos.22179077,51774251,21908142)Shanghai Science and Technology Commission’s“2020 Science and Technology In-novation Action Plan”(No.20511104003)Natural Science Foundation in Shanghai(No.21ZR1424200)。
文摘The Na-deficient P3-type layered oxide cathode material usually experience complex in-plane Na^(+)/vacancy ordering rearrangement and undesirable P3-O3 phase transitions in the high-voltage region,leading to inferior cycling performance.Additionally,they exhibit unsatisfactory stability when exposed to water for extended periods.To address these challenges,we propose a Cu/Ti co-doped P3-type cathode material(Na_(0.67)Ni_(0.3)Cu_(0.03)Mn_(0.6)Ti_(0.07)O_(2)),which effectively mitigates Na^(+)/vacancy ordering and suppresses P3-O3 phase transitions at high voltages.As a result,the as-prepared sample exhibited outstanding cyclic performance,with 81.9%retention after 500 cycles within 2.5–4.15 V,and 75.7%retention after300 cycles within 2.5–4.25 V.Meanwhile,it demonstrates enhanced Na^(+)transport kinetics during desodiation/sodiation and reduced growth of charge transfer impedance(R_(ct))after various cycles.Furthermore,the sample showed superb stability against water,exhibiting no discernible degradation in structure,morphology,or electrochemical performance.This co-doping strategy provides new insights for innovative and prospective cathode materials.
