期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
Fabrication and characterization of curcumin-loaded silk fibroin/P(LLA-CL) nanofibrous scaffold 被引量:2
1
作者 Yuan LIAN Jian-Chao ZHAN +1 位作者 Kui-Hua ZHANG Xiu-Mei MO 《Frontiers of Materials Science》 SCIE CSCD 2014年第4期354-362,共9页
Curcumin exhibited excellent properties including antioxidant, anti- inflammatory, antiviral, antibacterial, antifungal, anticancer, and anticoagulant activities. In this study, curcumin was incorporated into silk fib... Curcumin exhibited excellent properties including antioxidant, anti- inflammatory, antiviral, antibacterial, antifungal, anticancer, and anticoagulant activities. In this study, curcumin was incorporated into silk fibroin (SF)/poly(L-lactic acid-co-e- caprolactone) (P(LLA-CL)) nanofibrous scaffolds via electrospinning, and changes brought about by raising the curcumin content were observed: SEM images showed that the average nanofibrous diameter decreased at the beginning and then increased, and the nanofibers became uniform; FTIR showed that the conformation of SF transforming from random coil form to β-sheet structure had not been induced, while SF conformation converted to β-sheet after being treated with 75% ethanol vapor; XRD results confirmed that the crystal structure of (P(LLA-CL)) had been destroyed; The mechanical test illustrated that nanofibrous scaffolds still maintained good mechanical properties. Further, curcumin-loaded nanofibrous scaffolds were evaluated for drug release, antioxidant and antimicrobial activities in vitro. The results showed that curcumin presented a sustained release behavior from nanofibrous scaffolds and maintained its free radical scavenging ability, and such scaffolds could effectively inhibit S. aureus growth (〉 95%). Thus, curcumin-loaded SF/P(LLA-CL) nanofibrous scaffolds might be potential candidates for wound dressing and tissue engineering scaffolds. 展开更多
关键词 CURCUMIN SF/p(lla-cl) nanofibrous scaffold control release
原文传递
Electrospun P(LLA-CL) Nanofibers Loaded with Vitamins E TPGS as Antibacterial Wound Dressing Materials
2
作者 李赫宇 武俊紫 +3 位作者 吕瑶 潘琪霞 吴焕岭 朱利民 《Journal of Donghua University(English Edition)》 EI CAS 2017年第1期137-141,共5页
To obtain the wound dressings which can accelerate healing effectively,vitamin E D-α-Tocopherol polyethylene glycol succinate(vitamin E TPGS),one of the common derivatives of the unstable vitamins E,was successfully ... To obtain the wound dressings which can accelerate healing effectively,vitamin E D-α-Tocopherol polyethylene glycol succinate(vitamin E TPGS),one of the common derivatives of the unstable vitamins E,was successfully incorporated into P(LLA-CL)nanofibers by electrospinning.Electron microscopy showed that the smooth cylindrical fibers were obtained,albeit with a small amount of beading visible for the vitamins-loaded fibers.The diameters of the P(LLA-CL)fibers decreased with the addition of vitamins.The incorporation of the vitamin E TPGS in the electrospun fibers was confirmed by Fourier transform infrared spectroscopy(FTIR).Moreover,X-ray diffraction(XRD)indicated that vitamin E TPGS existed in the amorphous physical form after electrospinning.Fibers containing vitamin E TPGS showed a sustained release profile over more than 100 h in vitro.Antibacterial tests demonstrated that fibers loaded with vitamin E TPGS were effective in inhibiting the growth of E.coli and S.aureus.MTT assay showed that the fibers could promote the proliferation of L929 fibroblasts.These results above demonstrate the potential of P(LLA-CL)/vitamins E TPGS(P/E)as advanced wound dressing materials. 展开更多
关键词 vitamin E TpG S p(lla-cl) electrospinning wound dressings
下载PDF
Fabrication of Multi-layered Composite Scaffolds by Bi-directional Electrospinning Method 被引量:2
3
作者 WU Tong HUANG Chen +2 位作者 CHEN Jian-feng LIU Wei MO Xiu-mei 《Journal of Donghua University(English Edition)》 EI CAS 2014年第5期625-629,共5页
A multi-layered composite scaffolds consisting of poly ( L- ne) ( P (LLA-CL) ), collagen (COL) and chitosan (CS) were fabricated by a bi-directional electrospinnlng method. Synthetic P (LLA-CL) was used as... A multi-layered composite scaffolds consisting of poly ( L- ne) ( P (LLA-CL) ), collagen (COL) and chitosan (CS) were fabricated by a bi-directional electrospinnlng method. Synthetic P (LLA-CL) was used as the middle layer to enhance the strength, while natural COL/CS blending (9: 1, v/v) was used as the bioactive surfaces (inner and outer layers ) to improve the biocompatibility. Each three transitional layers were set between inner/outer layer and middle layer for delamination resistance. Scanning electron microscopy (SEM) was used to observe the fiber morphology. The Fourier transform infrared attenuated total reflectance spectroscopy (FTIR-ATR) spectra, X- ray diffraction (XRD) and thermogravimetry (TG) tests were used to analyze the physical properties of the scaffolds. The results showed that the modified clectrospinning method bad no negative effect on the components, crystal structure and thermostability of the scaffolds, but could effectively combine the mechanical property of synthetic material and biocompatibility of natural materials. Such method could be applied to the fabrication of composite scaffolds for vascular, skin. and nerve tissue engineering. 展开更多
关键词 ELECTROSpINNING poly ( L.lactide-co-ε-caprolactone )( p(lla-cl) ) COLLAGEN CHITOSAN composite NANOFIBERS
下载PDF
聚左乳酸己内酯-胶原蛋白静电纺人工血管的降解研究 被引量:1
4
作者 汪涛 陈剑锋 +7 位作者 赵珺 吴桐 莫秀梅 梅家才 张健 邵明哲 潘烨 吴海生 《中国生物医学工程学报》 CAS CSCD 北大核心 2014年第6期746-752,共7页
探讨聚左旋乳酸己内酯-胶原蛋白构建的可降解人工血管材料的降解规律以及生物相容性.聚左旋乳酸己内酯-胶原蛋白混合溶液通过静电纺丝技术制成静电纺人工血管材料作为实验组(n=40),市售聚四氟乙烯人工血管材料作为对照组(n=40),分... 探讨聚左旋乳酸己内酯-胶原蛋白构建的可降解人工血管材料的降解规律以及生物相容性.聚左旋乳酸己内酯-胶原蛋白混合溶液通过静电纺丝技术制成静电纺人工血管材料作为实验组(n=40),市售聚四氟乙烯人工血管材料作为对照组(n=40),分别植入兔背部脊柱两侧肌肉,于术后10、30、90、180 d取材,行形态学、组织学观察;并在400倍光学显微镜视野下进行中性粒细胞、巨噬细胞和淋巴细胞的分类计数.结果镜下聚左旋乳酸己内酯胶原蛋白组材料周围组织炎症反应轻,术后90 d材料碎裂,纤维组织长入材料网孔间隙内,逐步取代材料部位,形成囊状纤维膜;术后180 d材料基本降解殆尽,植入区域组织重塑后形态接近正常组织.聚四氟乙烯组材料周围组织炎症反应轻,术后180 d仍基本保持原有结构,材料周围有薄层纤维组织膜包绕.细胞计数结果提示植入后不同时期两组材料引起的细胞反应类型和反应趋势相同;仅术后10 d时实验组中性粒细胞数量较对照组增多(224.4±37.2 vs 192.2±18.1个/0.25 mm2,P <0.05),其余两组各期各类细胞均无明显差异(P>0.05).实验材料降解时间为3~6月,具有生物相容性好、降解规律适宜的良好生物学性能,有作为血管替代物的潜在可能性. 展开更多
关键词 聚左旋乳酸己内酯-胶原蛋白 降解 生物相容性
下载PDF
Fabrication and Characterization of Dual-layer Multichannel Nerve Guidance Conduit
5
作者 孙彬彬 吴桐 +4 位作者 王娟 布托阿齐 袁柳 李丹丹 莫秀梅 《Journal of Donghua University(English Edition)》 EI CAS 2017年第1期167-170,共4页
Nowadays, muifichannel nerve guidance conduit (NGC) was designed by mimicking the architecture of nerve fascicles, and it was used to reduce dispersion of regenerating axons within the NGC lumen. In this paper, gela... Nowadays, muifichannel nerve guidance conduit (NGC) was designed by mimicking the architecture of nerve fascicles, and it was used to reduce dispersion of regenerating axons within the NGC lumen. In this paper, gelatin was used to prepare multichannel inner layer of NGC by freeze-drying, and poly ( L-lactic add-co-ε- caprolactone) (P(LLA-CL)) was used to fabricate nanofiber outer layer of NGC by electrospinning. The morphology of dual-layer mtlltichannel NGC was observed by scanning electron microscopy (SEM). In vitro degradation experiment of the NGC demonstrated that the inner layer of NGC had the faster degradation rate than the outer layer of NGC. tell viability assay indicated that Schwann cells (SCs) showed better proliferation on dual-layer multichannel NGC than hollow NGC, because the multichannel structure introduced contact guidance for direct cell migration. Therefore, it was suggested that the dual-layer multichannel NGC had the potential for nerve lissue regeneration. 展开更多
关键词 poly(L-lactic acid-co-ε-caprolactone) p(lla-cl) GELATIN electrospinniag MULTICHANNEL nerve tissue engineering
下载PDF
导电型静电纺纳米纤维的制备及其表征 被引量:1
6
作者 宋炜 张建光 莫秀梅 《东华大学学报(自然科学版)》 CAS CSCD 北大核心 2014年第6期723-727,共5页
以六氟异丙醇(HFIP)为溶剂,乳酸己内酯共聚物(P(LLA-CL))掺杂聚苯胺(PANi)和樟脑磺酸(CPSA)作材料,采用静电纺技术制备导电型纳米纤维膜,并对其纤维的物理学特征进行表征.通过控制导电材料的添加量,探究纳米纤维直径和电导率的变化.研... 以六氟异丙醇(HFIP)为溶剂,乳酸己内酯共聚物(P(LLA-CL))掺杂聚苯胺(PANi)和樟脑磺酸(CPSA)作材料,采用静电纺技术制备导电型纳米纤维膜,并对其纤维的物理学特征进行表征.通过控制导电材料的添加量,探究纳米纤维直径和电导率的变化.研究表明:P(LLA-CL)纳米纤维分布均匀表面光滑,添加聚苯胺的纳米纤维直径变粗,电导率增大. 展开更多
关键词 静电纺 纳米纤维 乳酸己内酯共聚物p(lla-cl) 聚苯胺 导电材料
下载PDF
L-丙交酯与ε-己内酯共聚物的制备与表征
7
作者 张巍 李红媛 +2 位作者 杨立群 金瑛 易东旭 《高分子通报》 CAS CSCD 北大核心 2018年第10期37-41,共5页
以低毒辛酸亚锡为催化剂,L-丙交酯与ε-己内酯为原料,聚四氟乙烯管为模具,采用一步法开环聚合成型三种无规共聚物P(LLA-CL)棒。利用核磁共振氢谱、红外光谱、差示扫描量热仪和热重分析仪对共聚物棒进行性能分析,利用扫描电镜观察... 以低毒辛酸亚锡为催化剂,L-丙交酯与ε-己内酯为原料,聚四氟乙烯管为模具,采用一步法开环聚合成型三种无规共聚物P(LLA-CL)棒。利用核磁共振氢谱、红外光谱、差示扫描量热仪和热重分析仪对共聚物棒进行性能分析,利用扫描电镜观察共聚物棒脆断断面的微观形态。结果表明:合成的聚合物为无规共聚物,共聚比例接近投料比;改变ε-己内酯的含量可改变共聚物的结晶形态,也可调节共聚物力学性能。此结果为共聚物P(LLA-CL)在医疗器械方面的应用具有一定价值。 展开更多
关键词 L-丙交酯 Ε-己内酯 p(lla-cl) 输卵管栓塞 性能 微观形态
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部