P-wave velocity structure beneath reservoirs and surrounding areas in the lower Jinsha River

The lower reaches of the Jinsha River are rich in hydropower resources because of the high mountains,deep valleys,and swift currents in this area.This region also features complex tectonic structures and frequent earthquakes.After the impoundment of the reservoirs,seismic activity increased significantly.Therefore,it is necessary to study the P-wave velocity structure and earthquake locations in the lower reaches of the Jinsha River and surrounds,thus providing seismological support for subsequent earthquake prevention and disaster reduction work in reservoir areas.In this study,we selected the data of 7.670 seismic events recorded by the seismic networks in Sichuan.Yunnan,and Chongqing and the temporary seismic arrays deployed nearby.We then applied the double-difference tomography method to this data,to obtain the P-wave velocity structure and earthquake locations in the lower reaches of the Jinsha River and surrounds.The results showed that the Jinsha River basin has a complex lateral P-wave velocity structure.Seismic events are mainly distributed in the transition zones between high-and low-velocity anomalies,and seismic events are particularly intense in the Xiluodu and Baihetan reservoir areas.Vertical cross-sections through the Xiangjiaba and Xiluodu reservoir areas revealed an apparent high-velocity anomaly at approximately 6 km depth:this high-velocity anomaly plays a role in stress accumulation,with few earthquakes distributed inside the high-velocity body.After the impoundment of the Baihetan reservoir,the number of earthquakes in the reservoir area increased significantly.The seismic events in the reservoir area north of 27°N were related to the enhanced activity of nearby faults after impoundment:the earthquakes in the reservoir area south of 27°N were probably induced by additional loads(or regional stress changes),and the multiple microseismic events may have been caused by rock rupture near the main faults under high pore pressure.

Three-dimensional crustal P-wave velocity structure in the Yangbi and Eryuan earthquake regions, Yunnan, China

A magnitude 5.5 earthquakes occurred in Eryuan County,Dali Bai Autonomous Prefecture,Yunnan Province,China,on March 3.And a magnitude 5.0 earthquake occurred in the same place on April 17,2013,i.e.,45 days later.Then,on May 21,2021,multiple earthquakes,one with magnitude 6.4 and several at 5.0 or above,occurred in Yangbi County,Dali Bai Autonomous Prefecture,Yunnan Province,China.All of these occurred in the Weixi-QiaohouWeishan fault zone.In this study,1,874 seismic events in Yangbi and Eryuan counties were identified by automatic micro-seismic identification technology and the first arrivals were picked up manually.Following this,a total of 11,968 direct P-wave absolute arrivals and 73,987 high-quality Pwave relative arrivals were collected for joint inversion via the double difference tomography method.This was done to obtain the regional three-dimensional fine crustal P-wave velocity structure.The results show that the travel time residuals before and after inversion decreased from the initial–0.1–0.1 s to–0.06–0.06 s.The upper crust in the study area,which exhibited a low-velocity anomaly,corresponded to the basin region;this indicated that the low-velocity anomaly in the shallow part of the study area was affected by the basin.Results also showed some correlation between the distribution of the earthquakes and velocity structure,as there was a lowvelocity body Lv1 with a wide distribution at depths ranging from 15–20 km in the Yangbi and Eryuan earthquake regions.In addition,earthquakes occurred predominantly in the highlow velocity abnormal transition zone.The low-velocity body in the middle and lower crust may be prone to concentrating upper crustal stress,thus leading to the occurrence of earthquakes.

Three-dimensional P-wave Velocity Structure Modelling of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt: Crustal Architecture and Metallogenic Implications

In this study,we compiled and analyzed 69310 P-wave travel-time data from 6639 earthquake events.These events(M≥2.0)occurred from 1980 s to June 2019 and were recorded at 319 seismic stations(Chinese Earthquake Networks Center)in the study area.We adopted the double-difference seismic tomographic method(tomo DD)to invert the 3-D P-wave velocity structure and constrain the crust-upper mantle architecture of the Middle and Lower Reaches of the Yangtze River Metallogenic Belt(MLYB).A 1-D initial model extracted from wide-angle seismic profiles was used in the seismic tomography,which greatly reduced the inversion residual.Our results indicate that reliable velocity structure of th e uppermost mantle can be obtained when Pn is involved in the tomography.Our results show that:(1)the pattern of the uppermost mantle velocity structure corresponds well with the geological partitioning:a nearly E-W-trending low-velocity zone is present beneath the Dabie Orogen,in contrast to the mainly NE-trending low-velocity anomalies beneath the Jiangnan Orogen.They suggest the presence of thickened lower crust beneath the orogens in the study area.In contrast,the Yangtze and Cathaysia blocks are characterized by relatively high-velocity anomalies;(2)both the ultra-high-pressure(UHP)metamorphic rocks in the Dabie Orogen and the low-pressure metamorphic rocks in the Zhangbaling dome are characterized by high-velocity anomalies.The upper crust in the Dabie Orogen is characterized by a low-velocity belt,sandwiched between two high velocity zones in a horizontal direction,with discontinuous low-velocity layers in the middle crust.The keel of the Dabie Orogen is mainly preserved beneath its northern section.We infer that the lower crustal delamination may have mainly occurred in the southern Dabie Orogen,which caused the mantle upwelling responsible for the formation of the granitic magmas emplaced in the middle crust as the low-velocity layers observed there.Continuous deep-level compression likely squeezed the granitic magma upward to intrude the upper crustal UHP metamorphic rocks,forming the'sandwich'velocity structure there;(3)high-velocity updoming is widespread in the crust-mantle transition zone beneath the MLYB.From the Anqing-Guichi ore field northeastward to the Luzong,Tongling,Ningwu and Ningzhen orefields,high-velocity anomalies in the crust-mantle transition zone increase rapidly in size and are widely distributed.The updoming also exists in the crust-mantle transition zone beneath the Jiurui and Edongnan orefields,but the high-velocity anomalies are mainly stellate distributed.The updoming high-velocity zone beneath the MLYB generally extends from the crust-mantle transition zone to the middle crust,different from the velocity structure in the upper crust.The upper crust beneath the Early Cretaceous extension-related Luzong and Ningwu volcanic basins is characterized by high velocity zones,in contrast to the low velocity anomalies beneath the Late Jurassic to Early Cretaceous compression-related Tongling ore field.The MLYB may have undergone a compressive-to-extensional transition during the Yanshanian(Jurassic-Cretaceous)period,during which extensive magmatism occurred.The near mantle-crustal boundary updoming was likely caused by asthenospheric underplating at the base of the lower crust.The magmas may have ascended through major crustal faults,undergoing AFC(assimilation and fractional crystallization)processes,became emplaced in the fault-bounded basins or Paleozoic sequences,eventually forming the many Cu-Fe polymetallic deposits there.

2-D P-wave velocity structure in the mideast segment of Zhangjiakou-Bohai tectonic zone: Anxin-Xianghe-Kuancheng DSS profile

In order to get the 3-D fine velocity structure in the Capital-circle area of China, 6 explosions, ranging from 1800 to 2500 kg, were conducted and recorded by an array of 240 seismographs. A reflection/refraction survey was carried out along the profile extending from Anxin county, Hebei Province northeastward to Yanshan Mountains, crossing the Zhangjiakou-Bohai tectonic zone. The 2-D velocity structure of P wave was imaging along the profile. The results show that abnormality exists in the deep structure of the Zhangjiakou-Bohai tectonic zone: The base- ment is significantly depressed, the interfaces and Moho are uplifted, and a strong velocity gradient layer is existed above the Moho that may be dislocated by deep fault. The crust of Huabei basin is thin and low velocity body ex- ists in the crust. The Yanshan Mountains′ crust is thick, the layers in the crust are quite clear and the velocity in the layer is homogeneous. Huabei basin differs from Yanshan Mountains in structure.

Three-dimensional P-wave velocity structure of the crust beneath Hainan Island and its adjacent regions,China

Using over 3 500 first P arrival times recorded by nine digital seismic stations from Hainan Digital Seismic Net-work during 1999～2005,a 3-D P-wave velocity model of the crust under Hainan Island and adjacent regions has been determined. The results show that the pattern of velocity anomalies in the shallower upper crust is somewhat associated with the surface geological tectonics in the region. A relative low-velocity anomaly appears north of the Wangwu-Wenjiao fault zone and a relative high-velocity anomaly appears south of the Wangwu-Wenjiao fault zone,corresponding to the depressed areas in north Hainan Island,where many volcanoes are frequently active and geothermal values are relatively higher,and the uplifted and stable regions in central and south of the Hainan Is-land. In the middle and lower crust velocities are relatively lower in east Hainan than those in west Hainan,possi-bly suggesting the existence of the upwelling of hot materials from the mantle in east Hainan. The pattern of veloc-ity anomalies also indicates that NW faults,i.e.,the Puqian-Qinglan fault,may be shallower,while the E-W Wangwu-Wenjiao fault may be deeper,which perhaps extends down to Moho depth or deeper.

Three-Dimensional P-Wave Velocity Structure of the Crust of North China

Since the Xingtai （邢台） earthquake in 1966, China Earthquake Administration has carried out a survey campaign along more than thirty deep seismic sounding （DSS） profiles altogether about twenty thousand kilometers long in North China to study the velocity structure of the crust and the upper mantle in this region, and has obtained a great number of research findings. However, these researches have not provided a 3D velocity structure model of the crust of North China and cannot provide seismic evidence for the study of the deep tectonic characteristics of the crust of the whole region. Hence, based on the information from the published data of the DSS profiles, we have chosen 14 profiles to obtain a 3D velocity structure model of North China using the vectorization function of the GIS software （Arc/Info） and the Kriging data gridding method. With this velocity structure model, we have drawn the following conclusions： （1） The P-wave velocity of the uppermost crust of North China changes dramatically, exhibiting a complicated velocity structure in plane view. It can be divided into three velocity zones mainly trending towards north-west. In the research area, the lowest-velocity zones lie in the Haihe （海河） plain and Bohai （渤海） Bay. Although the geological structure of the sedimentary overburden in the study area is somewhat inherited by the upper crust, there are still several differences between them. （2） Generally, the P-wave velocity of the crust increases with depth in the study area, but there still exists local velocity reversion. In the east, low-velocity anomalies of the Haihe plain gradually disappear with increasing depth, and the Shanxi （山西） graben in the west is mainly characterized by relatively low velocity anomalies. Bounded by the Taihang （太行） Mountains, the eastern and western parts differ in structural trend of stratum above the crystalline basement. The structural trend of the Huanghuaihai （黄淮海） block in the east is mainly north-east, while that of the Shanxi block and the eastern edge of the Ordos block is mainly north-west. （3） According to the morphological features of Moho, the crust of the study area can be divided into six blocks. In the Shanxi block, Moho apppears like a nearly south-north trending depression belt with a large crustal thickness. In the southern edge of the Inner Mongolia block and the south of the Yanshan （燕山） block,the Moho exhibits a feature of fold belt, trending nearly towards east-west. In the eastern edge of the Ordos block, the structure of Moho is relatively complex, presenting a pattern of fold trending nearly towards north-west with alternating convexes and concaves. Beneath the Huanghuaihai block, the middle and northern parts of the North China rift zone, the Moho is the shallowest in the entire region, with alternating uplifts and depressions in its shape. For the anteclise zone in the west of Shandong （山东） Province, the Moho is discontinuous for the fault depression extending in the north-west direction along Zaozhuang （枣庄） -Qufu （曲阜）.

Imaging 3-D crustal P-wave velocity structure of western Yunnan with bulletin data

Western Yunnan is a region with intensive tectonic activity and serious earthquake risk. It is of significant importance to study three dimensional crustal structure of this region to understand the tectonic setting and disaster mechanism. Densification and digitalization of seismic networks in this region provides an opportunity to study the velocity structure with bulletin data. In this study, we collect P-wave data of 10 403 regional earthquakes recorded by 79 seismic stations from January 2008 to December 2010. In addition to first arrivals data （Pg with epieentral distance less than 200 km and Pn）, the Pg （or P） data with epicentral distance more than 200 km are also considered as later direct arrivals in the tomographic inversion. We also compare the quantity and the quality of the seismic data before 2010 and after 2010. The test results show that adding the follow-up Pg phase can effectively improve the inversion ability of crustal imaging, and quantity and the data quality are significantly improved since 2010. The tomographie results show that： （1） The Honghe fault zone, which is the major fault systems in this region, may cut through the entire crust, and the velocity contrasts between two sides at lower crust beneath the Honghe fault are estimated at higher than 10%, while the velocity difference below Nujiang fault zone extends only in the upper crust; （2） Most of the earthquakes in the region occurred at the interface of high-velocity media and low-velocity media, i.e., the areas with high velocity gradient, which has been validated in other areas.

3D P-wave Velocity Structure and Active Tectonics in the Xinfengjiang Area of Guangdong

In this paper,we determined an earthquake sequence location in the Xingfengjiang area from June,2007 to July,2014 and the 3 D P-wave velocity structure by a simultaneous inversion method. On that basis,we studied the occurrence features of active tectonics and the earthquake source mechanism. The results show that the reservoir fracture system has a tendency to increase with gradual depth from southeast to northwest,consistent with gravitational field research results. There are 4 high velocity zones( HVZ) under the depth of the 7 km-12 km crust between the Xinfengjiang Reservoir dam and Xichang District,Dongyuan. The max velocity of the biggest HVZ which is under Xichang is 6. 3 km/s. Under the reservoir dam there is a strong tectonic deformation zone,as the center exit Renzishi fault( F_2),Nanshan-Aotou faults( F_4),Heyuan fault( F_1) and Shijiao-Xingang-Baitian fault( F_5),7 earthquakes with M_L≥ 5. 0( including M 6. 1 in March,1962) occurred at the high gradient zone of the HVZ Ⅲ and HVZ Ⅳ edge which has been under the reservoir dam since 1960, with relativity energy releasing more thoroughly. Moderate seismic activity occurred at the HVZ Ⅰ edge which has been under Xichang since 2012,and is a danger zone for M5. 0 earthquakes in the future.

P-wave velocity structure in the crust and the uppermost mantle of Chao Lake region of the Tan-Lu Fault inferred from teleseismic arrival time tomography

Chao Lake is a Geoheritage site on the active Tan-Lu Fault between the Yangtze craton,the North China craton,and the Dabie orogenic belt in the southeast.This segment of the fault is not well constrained at depth partly due to the overprinting of the fault zone by intrusive materials and its relatively low seismic activity and sparse seismic station coverage.This study took advantage of a dense seismic array deployed around Chao Lake to delineate the P-wave velocity variations in the crust and uppermost mantle using teleseismic earthquake arrival time tomography.The station-pair double-difference with waveform crosscorrelation technique was employed.We used a multiscale resolution 3-D initial model derived from the combination of highresolution 3-D v S models within the region of interest to account for the lateral heterogeneity in the upper crust.The results revealed that the velocity of the upper crust is segmented with structures trending in the direction of the strike of the fault.Sedimentary basins are delineated on both sides of the fault with slow velocities,while the fault zone is characterized by high velocity in the crust and uppermost mantle.The high-velocity structure in the fault zone shows characteristics of magma intrusion that may be connected to the Mesozoic magmatism in and around the Middle and Lower Yangtze River Metallogenic Belt(MLYMB),implying that the Tan-Lu fault might have formed a channel for magma intrusion.Magmatic material in Chao Lake is likely connected to the partial melting,assimilation,storage,and homogenization of the uppermost mantle and the lower crustal rocks.The intrusions,however,seem to have suffered severe regional extension along the Tan-Lu fault driven by the eastward Paleo-Pacific plate subduction,thereby losing its deep trail due to extensional erosion.

Earthquake relocation and 3-dimensional crustal structure of P-wave velocity in central-western China

A simultaneous inversion of earthquake relocation and three-dimensional crustal structure of P-wave velocity in central-western China (21癗~36癗, 98癊~112癊) were performed in this paper. The crustal P-wave velocity model and earthquake relocation for this region are obtained using Pg and Sg phase readings of 9 988 earthquakes from 1992 to 1999 recorded at 193 seismic stations within central-western China by SPHYPIT90 and SPHREL3D90 programs. A lateral inhomogeneous structure of P-wave velocity in this region was obtained. Ob-vious contrast of P-wave velocities was revealed on both sides of active fault zones. Relocated epicenters of 6 459 events show clear lineation along active faults, which indicated a close correlation between seismicity and the active faults in this region. Focal depths of 82% relocated events ranged from 0 to 20 km, which is in good agreement with that from double-difference earthquake location algorithm.

Earthquake relocation and 3-dimensional crustal structure of P-wave velocity in cen-tral-western China

采用中国中西部地区(2l°～36°N，98°～112°E)193个地震台在1992～1999年间记录到的9988次地震的Pg和Sg震相走时的读数资料，用Roecker的SPHYPIT90程序，反演了该地区三维地壳P波速度结构，并用SPHREL3D90程序进行了地震的重新定位．反演结果揭示了中国中西部地区地震P波速度结构明显的横向不均匀性，这些不同深度上波速的横向变化多以该地区的活动断裂为分界线．可以看出活动断裂两侧存在明显的速度反差．通过重新定位，得到了6459次地震的震源参数，这些精确定位的地震震中明显沿该区活动断裂呈现条带状分布，其范围和尺度清晰地表示了这一地区地震活动与活动断裂的紧密关系．其中，82％重新精确定位的事件的震源深度在20km以内．这一结果与笔者用双差地震定位法得到的重新定位的震源深度分布相一致．

Velocity structure in the South Yellow Sea basin based on first-arrival tomography of wide-angle seismic data and its geological implications

The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail,leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments.In this study,we present seismic tomography data from ocean bottom seismographs that describe the NEE-trending velocity distributions of the basin.The results indicate that strong velocity variations occur at shallow crustal levels.Horizontal velocity bodies show good correlation with surface geological features,and multi-layer features exist in the vertical velocity framework(depth:0–10 km).The analyses of the velocity model,gravity data,magnetic data,multichannel seismic profiles,and drilling data showed that high-velocity anomalies(>6.5 km/s)of small(thickness:1–2 km)and large(thickness:>5 km)scales were caused by igneous complexes in the multi-layer structure,which were active during the Palaeogene.Possible locations of good Mesozoic and Palaeozoic marine strata are limited to the Central Uplift and the western part of the Northern Depression along the wide-angle ocean bottom seismograph array.Following the Indosinian movement,a strong compression existed in the Northern Depression during the extensional phase that caused the formation of folds in the middle of the survey line.This study is useful for reconstructing the regional tectonic evolution and delineating the distribution of the marine residual basin in the South Yellow Sea basin.

Design and Structure Optimization of Plenum Chamber with Airfoil Baffle to Improve Its Outlet Velocity Uniformity in Heat Setting Machines

The plenum chamber of a heat setting machine is a key structure for distributing hot air to different air channels.Its outlet velocity uniformity directly determines the heating uniformity of textiles,significantly affecting the heat setting performance.In a traditional heat setting machine,the outlet airflow maldistribution of the plenum chamber still exists.In this study,a novel plenum chamber with an airfoil baffle was established to improve the uniformity of the velocity distribution at the outlet in a heat setting machine.The structural influence of the plenum chamber on the velocity distribution was investigated using a computational fluid dynamics program.It was found that a chamber with a smaller outlet partition thickness had a better outlet velocity uniformity.The structural optimization of the plenum chamber was conducted using the particle swarm optimization algorithm.The outlet partition thickness,the transverse distance and the longitudinal distance of the optimized plenum chamber were 20,686.2 and 274.6 mm,respectively.Experiments were carried out.The experimental and simulated results showed that the optimized plenum chamber with an airfoil baffle could improve the outlet velocity uniformity.The air outlet velocity uniformity index of the optimized plenum chamber with an airfoil baffle was 4.75%higher than that of the plenum chamber without an airfoil baffle and 5.98%higher than that of the conventional chamber with a square baffle in a commercial heat setting machine.

3D S-wave velocity structure of the Ningdu basin in Jiangxi province inferred from ambient noise tomography with dense array

The Ningdu basin,located in southern Jiangxi province of southwest China,is one of the Mesozoic basin groups which has exploration prospects for geothermal energy.A study on the detailed velocity structure of the Ningdu basin can provide important information for geothermal resource exploration.In this study,we deployed a dense seismic array in the Ningdu basin to investigate the 3D velocity structure and discuss implications for geothermal exploration and geological evolution.Based on the dense seismic array including 35 short-period(5 s-100 Hz)seismometers with an average interstation distance of~5 km,Rayleigh surface wave dispersion curves were extracted from the continuous ambient noise data for surface wave tomographic inversion.Group velocity tomography was conducted and the 3D S-wave velocity structure was inverted by the neighborhood algorithm.The results revealed obvious low-velocity anomalies in the center of the basin,consistent with the low-velocity Cretaceous sedimentary rocks.The basement and basin-controlling fault can also be depicted by the S-wave velocity anomalies.The obvious seismic interface is about 2 km depth in the basin center and decreases to 700 m depth near the basin boundary,suggesting spatial thickness variations of the Cretaceous sediment.The fault features of the S-wave velocity profile coincide with the geological cognition of the western boundary basincontrolling fault,which may provide possible upwelling channels for geothermal fluid.This study suggests that seismic tomography with a dense array is an effective method and can play an important role in the detailed investigations of sedimentary basins.

Fine three-dimensional P-wave velocity structure beneath the capital region and deep environment for the nucleation of strong earthquakes

A detailed 3-D P-wave velocity model of the crust and uppermost mantle under the capital region is de- termined with a spatial resolution of 25 km in the horizontal direction and 4—17 km in depth. We used 48750 precise P-wave arrival time data from 2973 events of local crustal earthquakes, controlled seismic explosions and quarry blasts. These events were recorded by 123 seismic stations. The data are analyzed by using a 3-D seismic tomography method. Our tomographic model provides new information on the geological structure and complex seismotectonics of this re- gion. Different patterns of velocity structures show up in the North China Basin, the Taihangshan and the Yanshan Mountainous areas. The velocity images of the upper crust reflect well the surface geological, topographic and lithologi- cal features. In the North China Basin, the depression and uplift areas are imaged as slow and fast velocity belts, re- spectively, which are oriented in NE-SW direction. The trend of velocity anomalies is the same as that of major structure and tectonics. Paleozoic strata and Pre-Cambrian basement rocks outcrop widely in the Taihangshan and Yanshan uplift areas, which exhibit strong and broad high-velocity anoma- lies in our tomographic images, while the Quaternary inter- mountain basins show up as small low-velocity anomalies. Most of large earthquakes, such as the 1976 Tangshan earthquake (M 7.8) and the 1679 Sanhe earthquake (M 8.0), generally occurred in high-velocity areas in the upper to middle crust. However, in the lower crust to the uppermost mantle under the source zones of the large earthquakes, low-velocity and high-conductivity anomalies exist, which are considered to be associated with fluids, just like the 1995 Kobe earthquake (M 7.2) and the 2001 Indian Bhuj earth- quake (M 7.8). The fluids in the lower crust may cause the weakening of the seismogenic layer in the upper and middle crust and thus contribute to the initiation of the large crustal earthquakes.

The P-wave velocity structure of the lithosphere of the North China Craton——Results from the Wendeng-Alxa Left Banner deep seismic sounding profile

For the first time on the Chinese mainland, long-range wide-angle seismic reflection/refraction profiling technology has been applied to seismic wave phases from different depths and with different attributes within the various blocks of the North China Craton to characterize the structure of the crust and upper mantle lithosphere. By comparative analysis of the seismic wave phase characteristics in each block across a 1500-km-long east-west profile, we have identified conventional Pg, Pci, PmP and Pn phases in the crust, made a clear contrast between PL1 and PL2 waves belonging to two groups of lithospheric-scale phases, and produced a model of crust-mantle velocity structures and tectonic characteristics after one- and two-dimensional calculations and processing. The results show that the thickness of the crust and lithosphere gradually deepens from east to west along the profile. However, at the reflection/refraction interface, seismic waves in each group show obvious localized changes in each block. Also, the depth to the crystalline basement changes greatly, from as much as 7.8 km in the North China fault basin to only about 2 km beneath the Jiaodong Peninsula and Taihang-Lüliang area. The Moho morphology as a whole ranges from shallow in the east to deep in the west, with the deepest point in the Ordos Block at 47 km; in contrast, the North China Plain Block is uplifting. The L1 interface of the lithosphere is observed only to the west of Taihang Mountains, at a relatively slowly changing depth of about 80 km. The L2 interface varies from 75 to 160 km and shows a sharp deepening to the west of Taihang Mountains, forming a mutation belt.

Crustal P-wave velocity structure of the Longmenshan region and its tectonic implications for the 2008 Wenchuan earthquake

The P-wave velocity structure of the crust in the Longmenshan region has been imaged by seismic travel time tomography us ing local and regional first P-wave arrivals recorded from 2000 to 2008. The tomographic model provides a way to analyze the deep tectonics of the Longmenshan fault belt and the tectonic implications for the 2008 Ms8.0 Wenchuan earthquake. The P-wave velocity images indicate that the initial rupture site and focal depth of the Wenchuan earthquake, together with the di rection of rupture propagation, closely relate to the crustal structure of the Longmenshan region. The Pengguan massif to the west of the Longmenshan fault belt is characterized by high velocity anomalies, suggesting that the crust has a strong strain strength that can accumulate large stresses over a long period. The Ms8.0 Wenchuan earthquake is located at the southwestern end of the Pengguan massif and the western edge of the Sichuan Basin. The collision between the Pengguan massif and the Sichuan Basin becomes the primary reason for the occurrence of the Ms8.0 Wenchuan earthquake. To the north of Wenchuan, the occurrence and propagation of rupture benefit from low velocity anomalies along the Longmenshan fault belt; whereas to the south of Wenchuan, the brittle rupture can occur with more difficulty in relatively weak crust with low velocities. This may be one of the reasons for the absence of aftershocks to the south of Wenchuan, and the rupture induced by the Ms8.0 Wenchuan earthquake propagating from the north to the south along the Longmenshan fault belt. The deep geodynamics of the Ms8.0 Wenchuan earthquake may occur due to the discrepancy of crustal structures on the two sides of the Longmenshan fault belt. Ductile deformation and crustal flow can easily occur in the weak middle-lower crust beneath the Songpan-Garze orogenic belt. The eastward movement of the Tibetan Plateau is obstructed by the rigid lithosphere of the Sichuan Basin, and then the thick ening of the middle-lower crust and vertical deformation occur in the crust of the Longmenshan fault belt. In addition, the down-warping of the Moho and the basement thrusting onto the range front induced crustal deformation and strain accumula tion, which provided the potential energy to trigger the occurrence of the Ms8.0 Wenchuan earthquake.

Crustal P-wave velocity structure in Lower Yangtze region: Reinterpretation of Fuliji-Fengxian deep seismic sounding profile

The finite-difference inversion method and RayInvr technique had been employed to inter- pret the wide-angle seismic reflection/refraction data of the Fuliji-Fengxian deep seismic sounding (DSS) profile in Lower Yangtze region, hence the velocity structure was acquired and conclusions were sum- marized as follows: (1) The velocity model along this profile can be divided into three large layers vertically (upper, middle and lower crusts) and six blocks laterally, and this velocity distribution agrees with the feature of stable platform. (2) The depth of Moho discontinuity is 30―36 km. The thickness of the upper crust is 10.5―13.0 km, where the lateral velocity varies strongly, and the velocity increases to 6.2 km/s?1 at bottom. Besides, the velocity distribu- tions in the bottom layer of middle crust and lower crust have an apparent inhomogeneity. The velocity in upper layer of middle crust, lower layer of middle crust, lower crust and uppermost mantle is 5.9―6.2, 6.3―6.4, 6.6―7.0 and 8.06―8.29 km/s?1, respec- tively. (3) On two sides of the Tanlu fault belt (TFB), the mid-crustal velocity structure is quite different, nevertheless no apparent discrimination in velocity distribution and boundary topography exhibits in lower crust, hence it is inferred that the Jiashan segment of TFB had probably cut through whole crust in the Mesozoic, and the fault behaviour in lower crust had disappeared due to the low viscosity produced by the orogenic extension or crustal bal- ance, while the fault features in the rigid middle-uppercrust have been preserved up to the present. (4) The moderate earthquakes with Ms > 5.0 nearby Zhen- jiang are related to the deep faults extending into the lower crust, and the earthquakes were probably induced by the energy been transferred from man- tle lithosphere to upper-mid crust along the deep faults, and aggregated at some preferable tectonic positions.

Joint Inversion of the 3D P Wave Velocity Structure of the Crust and Upper Mantle under the Southeastern Margin of the Tibetan Plateau Using Regional Earthquake and Teleseismic Data

The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai-Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background of strong earthquakes in China's Mainland and to predict future strong earthquake risk zones. Studies of the structural environment and physical characteristics of the deep structure in this area are helpful to explore deep dynamic effects and deformation field characteristics, to strengthen our understanding of the roles of anisotropy and tectonic deformation and to study the deep tectonic background of the seismic origin of the block＇s interior. In this paper, the three-dimensional （3D） P-wave velocity structure of the crust and upper mantle under the southeastern margin of the Qinghai-Tibet Plateau is obtained via observational data from 224 permanent seismic stations in the regional digital seismic network of Yunnan and Sichuan Provinces and from 356 mobile China seismic arrays in the southern section of the north-south seismic belt using a joint inversion method of the regional earthquake and teleseismic data. The results indicate that the spatial distribution of the P-wave velocity anomalies in the shallow upper crust is closely related to the surface geological structure, terrain and lithology. Baoxing and Kangding, with their basic volcanic rocks and volcanic clastic rocks, present obvious high-velocity anomalies. The Chengdu Basin shows low-velocity anomalies associated with the Quaternary sediments. The Xichang Mesozoic Basin and the Butuo Basin are characterised by low- velocity anomalies related to very thick sedimentary layers. The upper and middle crust beneath the Chuan-Dian and Songpan-Ganzi Blocks has apparent lateral heterogeneities, including low-velocity zones of different sizes. There is a large range of low-velocity layers in the Songpan-Ganzi Block and the sub-block northwest of Sichuan Province, showing that the middle and lower crust is relatively weak. The Sichuan Basin, which is located in the western margin of the Yangtze platform, shows high-velocity characteristics. The results also reveal that there are continuous low-velocity layer distributions in the middle and lower crust of the Daliangshan Block and that the distribution direction of the low-velocity anomaly is nearly SN, which is consistent with the trend of the Daliangshan fault. The existence of the low-velocity layer in the crust also provides a deep source for the deep dynamic deformation and seismic activity of the Daliangshan Block and its boundary faults. The results of the 3D P-wave velocity structure show that an anomalous distribution of high-density, strong-magnetic and high-wave velocity exists inside the crust in the Panxi region. This is likely related to late Paleozoic mantle plume activity that led to a large number of mafic and ultra-mafic intrusions into the crust. In the crustal doming process, the massive intrusion of mantle-derived material enhanced the mechanical strength of the crustal medium. The P-wave velocity structure also revealed that the upper mantle contains a low-velocity layer at a depth of 80-120 km in the Panxi region. The existence of deep faults in the Panxi region, which provide conditions for transporting mantle thermal material into the crust, is the deep tectonic background for the area＇s strong earthquake activity.

Crustal P-wave velocity structure in the northeastern margin of the Qinghai-Tibetan Plateau and insights into crustal deformation

The transitional area between the northeastern margin of the Qinghai-Tibetan Plateau, Ordos Block and Alxa Block,also being the northern segment of the North-South Seismic Belt, is characterized by considerably high seismicity level and high risk of strong earthquakes. In view of the special tectonic environment and deep tectonic setting in this area, this study used two seismic wide-angle reflection/refraction cross profiles for double constraining, so as to more reliably obtain the fine-scale velocity structure characteristics in both the shallow and deep crust of individual blocks and their boundaries in the study area,and further discuss the seismogenic environment in seismic zones with strong historical earthquakes. In this paper, the P-wave data from the two profiles are processed and interpreted, and two-dimensional crustal velocity structure models along the two profiles are constructed by travel time forward modeling. The results show that there are great differences in velocity structure,shape of intra-crustal interfaces and crustal thickness among different blocks sampled by the two seismic profiles. The crustal thickness along the Lanzhou-Huianbu-Yulin seismic sounding profile(L1) increases from ~43 km in the western margin of Ordos Block to ~56 km in the Qilian Block to the west. In the Ordos Block, the velocity contours vary gently, and the average velocity of the crust is about 6.30 km s-1; On the other hand, the velocity structures in the crust of the Qilian Block and the arclike tectonic zone vary dramatically, and the average crustal velocities in these areas are about 0.10 km s-1 lower than that of the Ordos Block. In addition, discontinuous low-velocity bodies(LVZ1 and LVZ2) are identified in the crust of the Qilian Block and the arc-like tectonic zone, the velocity of which is 0.10–0.20 km s-1 lower than that of the surroundings. The average crustal thickness of the Ordos Block is consistently estimated to be around 43 km along both Profile L2(Tongchuan-Huianbu-Alashan left banner seismic sounding profile) and Profile L1. In contrast to the gently varying intra-crustal interfaces and velocity contours in the Ordos Block along Profile L1, which is a typical structure characteristic of stable cratons, the crustal structure in the Ordos Block along Profile L2 exhibits rather complex variations. This indicates the presence of significant structural differences in the crust within the Ordos Block. The crustal structure of the Helan Mountain Qilian Block and the Yinchuan Basin is featured by "uplift and depression" undulations, showing the characteristics of localized compressional deformation.Moreover, there are low-velocity zones with alternative high and low velocities in the middle and lower crust beneath the Helan Mountain, where the velocity is about 0.15–0.25 km s-1 lower than that of the surrounding areas. The crustal thickness of the Alxa Block is about 49 km, and the velocity contours in the upper and middle-lower crust of the block vary significantly. The complex crustal velocity structure images along the two seismic sounding profiles L1 and L2 reveal considerable structural differences among different tectonic blocks, their coupling relationships and velocity structural features in the seismic zones where strong historical earthquakes occurred. The imaging result of this study provides fine-scale crustal structure information for further understanding the seismogenic environment and mechanism in the study area.