This review compiles information on PCDD/F-and PCB-contaminated eggs from 20 years of global egg monitoring around emission sources in four continents conducted by the International Pollutants Elimination Network(IPEN...This review compiles information on PCDD/F-and PCB-contaminated eggs from 20 years of global egg monitoring around emission sources in four continents conducted by the International Pollutants Elimination Network(IPEN)and Arnika as well as a compilation of data from scientific literature.IPEN monitored 127 pooled egg samples including samples from 113 chicken flocks at potential PCDD/F-and PCB-contaminated sites around priority sources listed in the Stockholm Convention(e.g.waste incinerators,metal industries,cement plants,and open burning).99(88%)of pooled egg samples were above the EU maximum limits for PCDD/Fs(2.5 pg PCDD/F-TEQ/g fat)or the sum of PCDD/Fs and dioxinlike PCBs(5 pg PCDD/F-PCB-TEQ/g fat).Children consuming such eggs exceed the tolerable weekly intake(TWI).This demonstrates that close to 90%of these areas were not safe for the production of free-range eggs.Sixteen out of the 113 egg samples(14%)were contaminated above 50 pg TEQ/g fat and exceeded the EU maximum limit more than 10 times.From the 26 pooled egg samples around incinerators 24(92%)exceeded the limit with a mean of 43.1 pg TEQ/g fat(2.6e234 pg TEQ/g).All 21 egg samples around metal industries(4.4e112.6 pg TEQ/g fat)were above limits with mean concentration of 26.0 pg TEQ/g fat.Also all 7 egg samples measured at e-waste recycling sites were above limits(mean 308 pg TEQ/g fat).In 58(51%)pooled egg samples the PCB-TEQ was above 5 pg TEQ/g fat exceeding the EU maximum limit with dioxin-like PCBs alone.This highlights the role of commercial PCBs for global contamination with dioxin-like compounds.It was discovered that around metal industries,shredder plants,open burning sites of e-waste and dump sites,a high share of contamination was caused by dl-PCBs.This clearly shows severe PCB release from the end-of-life management of PCB-containing equipment in developing countries.Also highly contaminated eggs were found at many sites where plastic was incinerated.The highest contaminated egg sample ever measured came from an e-waste site in Ghana and had 856 pg TEQ/g fat plus 300 pg TEQ from brominated dioxins(PBDD/Fs).Other extreme PCDD/F contaminations of eggs were found at a chlor-alkali site(514 pg TEQ/g fat),Agent Orange contaminated areas in Vietnam(490,249 and 246 pg TEQ/g fat)and e-waste sites(568 and 520 pg TEQ/g fat).Where DR CALUX®bioassay revealed higher TEQ compared to measured PCDD/F-PCB-TEQ in IPEN studies,polybrominated PBDD/F were also measured and detected up to 300 pg TEQ/g fat at e-waste sites.One positive outcome from the IPEN studies is that all 10 pooled supermarket eggs in developing countries were below regulatory limit.Policy recommendations are made including:a systematic assessment of areas around PCDD/Fs and PCBs sources;measures for reduction of exposures of populations;urgent control of emission sources including PCB equipment,the open burning of plastic,and the use of plastic as fuel in boilers/incinerators in developing countries without air pollution control.Furthermore,soil limits need to be re-assessed and lowered for free-range poultry.展开更多
Article 5 of the Stockholm Convention requires that each Party shall take measures to reduce the releases from anthropogenic sources of unintentional persistent organic pollutants(UPOPs),with the goal of their continu...Article 5 of the Stockholm Convention requires that each Party shall take measures to reduce the releases from anthropogenic sources of unintentional persistent organic pollutants(UPOPs),with the goal of their continuing minimization and,where feasible,their ultimate elimination.A major source of polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)and other unintentional POPs releases,both in China and worldwide,is the metal industry in particular secondary metal industries such as copper smelting.More than 50%of the global secondary copper production is now in China and high levels of PCDD/Fs are released from these operations with the national inventory of China reporting a total of 1133.8 g toxic equivalents(TEQ)yr1.Consequently the Global Environment Facility(GEF)is supporting the project‘UPOPs Reduction through best available techniques and best environmental practices(BAT/BEP)in the secondary copper production sector’in China compromising>50%of the global secondary copper production.As part of this project,information on relevant UPOPs from the metal industry have been reviewed and is presented here.This information should also be useful for other(developing)countries for controlling UPOPs releases from metal industries.This review and the information it contains provides a robust resource for policy makers,the industry and researchers to improve secondary copper production to BAT/BEP standards in relation to the reduction of PCDD/Fs and other UPOPs release.The contents include the details required to assist the understanding of the formation of chlorinated UPOPs along with their brominated and brominated-chlorinated analogues.It reviews the international sources of information on BAT/BEP,including the integrated approach considered in the European BAT Reference document,and shows how this can be used to achieve an overall reduction of pollutant releases from the industry.The current national standards of PCDD/F limits to air,water and solid residues have been compiled and are also included.Challenges which need to be addressed,such as the current international lack to consider brominated and mixed bromo-chloro PXDD/Fs which might be more environmentally significant than PCDD/Fs in some facilities e are also discussed.The study includes a brief description of the steps China has taken to change the national regulatory framework and to improve the sustainability of its secondary metal industry.The Stockholm Convention BAT/BEP guidelines recommend consideration of integrated pollution prevention and control and sustainable production as general principles which parties may incorporate when applying the BAT/BEP guidelines and guidance.This holistic approach is considered in the current project and in the improvement of the pilot facilities and will also be considered in the replication of experiences in other facilities.Using this approach ensures the implementation of the Stockholm Convention can contribute to integrated pollution prevention and control,the development of a circular economy and consequently to genuinely sustainable development thus contributing to different sustainable development goals(SDGs).It is hoped this approach will be adopted in other developing and transition economies and thus help to achieve improvements of the secondary metal industry globally.展开更多
文摘This review compiles information on PCDD/F-and PCB-contaminated eggs from 20 years of global egg monitoring around emission sources in four continents conducted by the International Pollutants Elimination Network(IPEN)and Arnika as well as a compilation of data from scientific literature.IPEN monitored 127 pooled egg samples including samples from 113 chicken flocks at potential PCDD/F-and PCB-contaminated sites around priority sources listed in the Stockholm Convention(e.g.waste incinerators,metal industries,cement plants,and open burning).99(88%)of pooled egg samples were above the EU maximum limits for PCDD/Fs(2.5 pg PCDD/F-TEQ/g fat)or the sum of PCDD/Fs and dioxinlike PCBs(5 pg PCDD/F-PCB-TEQ/g fat).Children consuming such eggs exceed the tolerable weekly intake(TWI).This demonstrates that close to 90%of these areas were not safe for the production of free-range eggs.Sixteen out of the 113 egg samples(14%)were contaminated above 50 pg TEQ/g fat and exceeded the EU maximum limit more than 10 times.From the 26 pooled egg samples around incinerators 24(92%)exceeded the limit with a mean of 43.1 pg TEQ/g fat(2.6e234 pg TEQ/g).All 21 egg samples around metal industries(4.4e112.6 pg TEQ/g fat)were above limits with mean concentration of 26.0 pg TEQ/g fat.Also all 7 egg samples measured at e-waste recycling sites were above limits(mean 308 pg TEQ/g fat).In 58(51%)pooled egg samples the PCB-TEQ was above 5 pg TEQ/g fat exceeding the EU maximum limit with dioxin-like PCBs alone.This highlights the role of commercial PCBs for global contamination with dioxin-like compounds.It was discovered that around metal industries,shredder plants,open burning sites of e-waste and dump sites,a high share of contamination was caused by dl-PCBs.This clearly shows severe PCB release from the end-of-life management of PCB-containing equipment in developing countries.Also highly contaminated eggs were found at many sites where plastic was incinerated.The highest contaminated egg sample ever measured came from an e-waste site in Ghana and had 856 pg TEQ/g fat plus 300 pg TEQ from brominated dioxins(PBDD/Fs).Other extreme PCDD/F contaminations of eggs were found at a chlor-alkali site(514 pg TEQ/g fat),Agent Orange contaminated areas in Vietnam(490,249 and 246 pg TEQ/g fat)and e-waste sites(568 and 520 pg TEQ/g fat).Where DR CALUX®bioassay revealed higher TEQ compared to measured PCDD/F-PCB-TEQ in IPEN studies,polybrominated PBDD/F were also measured and detected up to 300 pg TEQ/g fat at e-waste sites.One positive outcome from the IPEN studies is that all 10 pooled supermarket eggs in developing countries were below regulatory limit.Policy recommendations are made including:a systematic assessment of areas around PCDD/Fs and PCBs sources;measures for reduction of exposures of populations;urgent control of emission sources including PCB equipment,the open burning of plastic,and the use of plastic as fuel in boilers/incinerators in developing countries without air pollution control.Furthermore,soil limits need to be re-assessed and lowered for free-range poultry.
基金the National Key Research and Development Project of China(2019YFC1805600)the Global Environment Facility(Project 5383)the contributions are highly appreciated.
文摘Article 5 of the Stockholm Convention requires that each Party shall take measures to reduce the releases from anthropogenic sources of unintentional persistent organic pollutants(UPOPs),with the goal of their continuing minimization and,where feasible,their ultimate elimination.A major source of polychlorinated dibenzo-p-dioxins and dibenzofurans(PCDD/Fs)and other unintentional POPs releases,both in China and worldwide,is the metal industry in particular secondary metal industries such as copper smelting.More than 50%of the global secondary copper production is now in China and high levels of PCDD/Fs are released from these operations with the national inventory of China reporting a total of 1133.8 g toxic equivalents(TEQ)yr1.Consequently the Global Environment Facility(GEF)is supporting the project‘UPOPs Reduction through best available techniques and best environmental practices(BAT/BEP)in the secondary copper production sector’in China compromising>50%of the global secondary copper production.As part of this project,information on relevant UPOPs from the metal industry have been reviewed and is presented here.This information should also be useful for other(developing)countries for controlling UPOPs releases from metal industries.This review and the information it contains provides a robust resource for policy makers,the industry and researchers to improve secondary copper production to BAT/BEP standards in relation to the reduction of PCDD/Fs and other UPOPs release.The contents include the details required to assist the understanding of the formation of chlorinated UPOPs along with their brominated and brominated-chlorinated analogues.It reviews the international sources of information on BAT/BEP,including the integrated approach considered in the European BAT Reference document,and shows how this can be used to achieve an overall reduction of pollutant releases from the industry.The current national standards of PCDD/F limits to air,water and solid residues have been compiled and are also included.Challenges which need to be addressed,such as the current international lack to consider brominated and mixed bromo-chloro PXDD/Fs which might be more environmentally significant than PCDD/Fs in some facilities e are also discussed.The study includes a brief description of the steps China has taken to change the national regulatory framework and to improve the sustainability of its secondary metal industry.The Stockholm Convention BAT/BEP guidelines recommend consideration of integrated pollution prevention and control and sustainable production as general principles which parties may incorporate when applying the BAT/BEP guidelines and guidance.This holistic approach is considered in the current project and in the improvement of the pilot facilities and will also be considered in the replication of experiences in other facilities.Using this approach ensures the implementation of the Stockholm Convention can contribute to integrated pollution prevention and control,the development of a circular economy and consequently to genuinely sustainable development thus contributing to different sustainable development goals(SDGs).It is hoped this approach will be adopted in other developing and transition economies and thus help to achieve improvements of the secondary metal industry globally.
