Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful...Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.展开更多
The solvent of P350 was applied to extract and separate the oxalic acid from the mother-liquor originated from the precipitation of cobalt by oxalic acid,and its extraction mechanism was deduced.Some factors,including...The solvent of P350 was applied to extract and separate the oxalic acid from the mother-liquor originated from the precipitation of cobalt by oxalic acid,and its extraction mechanism was deduced.Some factors,including the concentration of P350, the concentration of hydrochloric acid and the concentration of oxalic acid were investigated to determine the best distribution coefficient of the oxalic acid.In the case of phase ratio(O/A)at 2.0,the extraction of the oxalic acid was more than 95%and its concentration in the extraction raffinate was lower than 0.004 0 mol/L after six-stage counter-current extraction.While the phase ratio(O/A)of the stripping was at 1.0,the recovery of oxalic acid attained more than 95%after ten-stage counter-current stripping.展开更多
Solvent extraction experiments were conducted from acidic solutions containing germanium（IV） and other metal ions, such as Ga3＋, Fe3＋, Zn2＋ and Fe2＋ in hydrometallurgical process of zinc. The purpose of this wor...Solvent extraction experiments were conducted from acidic solutions containing germanium（IV） and other metal ions, such as Ga3＋, Fe3＋, Zn2＋ and Fe2＋ in hydrometallurgical process of zinc. The purpose of this work was to enhance the efficiency of the extraction and stripping processes and the selectivity of germanium and other metals, while making the method as simple as possible. Germanium was recovered from sulfuric acid, using di-（2-ethylhexyl） phosphoric acid （P2O4） as an extractant, tributyl phosphate （TBP） as modifier diluted in sulfonate kerosene and stripped by NaOH aqueous solution. Extraction studies were carried out under different acid concentrations and solvent concentrations, and optimized conditions were determined. The numbers of stages required for extraction and stripping of metal ions were determined from the McCabe-Thiele plot. The results show that the extracting and stripping efficiencies are 94.3% and 100%, respectively, through two-stage extraction and two-stage strip. Moreover, the synergistic effect of TBP on the system P2O4/kerosense/Ge4＋ is revealed with respect to the extraction of germanium.展开更多
A stripping method for the determination of hypoxanthine in the presence of copper at the submicromolar concentration levels is described. The method is based on controlled adsorptive accumulation of hypoxanthine-copp...A stripping method for the determination of hypoxanthine in the presence of copper at the submicromolar concentration levels is described. The method is based on controlled adsorptive accumulation of hypoxanthine-copper at the thin-film mercury electrode followed by a fast linear scan voltammetric measurement of the surface species. Optimum experimental conditions were found to be the use of 1.0 × 10﹣3 mol·L﹣1 NaOH solution as electrolyte supporting, an accumulation potential of ﹣0.50 V and a linear scan rate of 200 mV·s﹣1. The response of hypoxanthine-copper is linear over the concentration ranges of 10 - 60 ppb. For an accumulation time of 30 minutes, the detection limit was found to be 250 ppt (1.8 × 10﹣9 mol·L﹣1). Adequate conditions for measuring the hypoxanthine in the presence of metal ions, xanthine, uric acid and other nitrogenated bases were also investigated. The utility of the method is demonstrated by the presence of hypoxanthine associated in ATP or ssDNA.展开更多
基金Project(51090385) supported by the National Natural Science Foundation of ChinaProject(2001IB001) supported by Yunnan Provincial Science and Technology Fund, China
文摘Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.
文摘The solvent of P350 was applied to extract and separate the oxalic acid from the mother-liquor originated from the precipitation of cobalt by oxalic acid,and its extraction mechanism was deduced.Some factors,including the concentration of P350, the concentration of hydrochloric acid and the concentration of oxalic acid were investigated to determine the best distribution coefficient of the oxalic acid.In the case of phase ratio(O/A)at 2.0,the extraction of the oxalic acid was more than 95%and its concentration in the extraction raffinate was lower than 0.004 0 mol/L after six-stage counter-current extraction.While the phase ratio(O/A)of the stripping was at 1.0,the recovery of oxalic acid attained more than 95%after ten-stage counter-current stripping.
基金Project(50774094)supported by the National Natural Science Foundation of China
文摘Solvent extraction experiments were conducted from acidic solutions containing germanium（IV） and other metal ions, such as Ga3＋, Fe3＋, Zn2＋ and Fe2＋ in hydrometallurgical process of zinc. The purpose of this work was to enhance the efficiency of the extraction and stripping processes and the selectivity of germanium and other metals, while making the method as simple as possible. Germanium was recovered from sulfuric acid, using di-（2-ethylhexyl） phosphoric acid （P2O4） as an extractant, tributyl phosphate （TBP） as modifier diluted in sulfonate kerosene and stripped by NaOH aqueous solution. Extraction studies were carried out under different acid concentrations and solvent concentrations, and optimized conditions were determined. The numbers of stages required for extraction and stripping of metal ions were determined from the McCabe-Thiele plot. The results show that the extracting and stripping efficiencies are 94.3% and 100%, respectively, through two-stage extraction and two-stage strip. Moreover, the synergistic effect of TBP on the system P2O4/kerosense/Ge4＋ is revealed with respect to the extraction of germanium.
文摘A stripping method for the determination of hypoxanthine in the presence of copper at the submicromolar concentration levels is described. The method is based on controlled adsorptive accumulation of hypoxanthine-copper at the thin-film mercury electrode followed by a fast linear scan voltammetric measurement of the surface species. Optimum experimental conditions were found to be the use of 1.0 × 10﹣3 mol·L﹣1 NaOH solution as electrolyte supporting, an accumulation potential of ﹣0.50 V and a linear scan rate of 200 mV·s﹣1. The response of hypoxanthine-copper is linear over the concentration ranges of 10 - 60 ppb. For an accumulation time of 30 minutes, the detection limit was found to be 250 ppt (1.8 × 10﹣9 mol·L﹣1). Adequate conditions for measuring the hypoxanthine in the presence of metal ions, xanthine, uric acid and other nitrogenated bases were also investigated. The utility of the method is demonstrated by the presence of hypoxanthine associated in ATP or ssDNA.
