Stackelberg Game-Based Optimal Dispatch for PEDF Park and Power Grid Interaction under Multiple Incentive Mechanisms

The integration of photovoltaic,energy storage,direct current,and flexible load(PEDF)technologies in building power systems is an importantmeans to address the energy crisis and promote the development of green buildings.The friendly interaction between the PEDF systems and the power grid can promote the utilization of renewable energy and enhance the stability of the power grid.For this purpose,this work introduces a framework of multiple incentive mechanisms for a PEDF park,a building energy system that implements PEDF technologies.The incentive mechanisms proposed in this paper include both economic and noneconomic aspects,which is the most significant innovation of this paper.By modeling the relationship between a PEDF park and the power grid into a Stackelberg game,we demonstrate the effectiveness of these incentive measures in promoting the friendly interaction between the two entities.In this game model,the power grid determines on the prices of electricity trading and incentive subsidy,aiming to maximize its revenue while reducing the peak load of the PEDF park.On the other hand,the PEDF park make its dispatch plan according to the prices established by the grid,in order to reduce electricity consumption expense,improve electricity utility,and enhance the penetration rate of renewable energy.The results show that the proposed incentive mechanisms for the PEDF park can help to optimize energy consumption and promote sustainable energy practices.

A Distributed Photovoltaics Ordering Grid-Connected Method for Analyzing Voltage Impact in Radial Distribution Networks

In recent years,distributed photovoltaics(DPV)has ushered in a good development situation due to the advantages of pollution-free power generation,full utilization of the ground or roof of the installation site,and balancing a large number of loads nearby.However,under the background of a large-scale DPV grid-connected to the county distribution network,an effective analysis method is needed to analyze its impact on the voltage of the distribution network in the early development stage of DPV.Therefore,a DPV orderly grid-connected method based on photovoltaics grid-connected order degree(PGOD)is proposed.This method aims to orderly analyze the change of voltage in the distribution network when large-scale DPV will be connected.Firstly,based on the voltagemagnitude sensitivity(VMS)index of the photovoltaics permitted grid-connected node and the acceptance of grid-connected node(AoGCN)index of other nodes in the network,thePGODindex is constructed to determine the photovoltaics permitted grid-connected node of the current photovoltaics grid-connected state network.Secondly,a photovoltaics orderly grid-connected model with a continuous updating state is constructed to obtain an orderly DPV grid-connected order.The simulation results illustrate that the photovoltaics grid-connected order determined by this method based on PGOD can effectively analyze the voltage impact of large-scale photovoltaics grid-connected,and explore the internal factors and characteristics of the impact.

Progress of semitransparent emerging photovoltaics for building integrated applications

With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the practical application requirements of BIPVs,in addition to the evaluation indicator of power conversion efficiency(PCE),other key performance indicators such as heat-insulating ability,average visible light transmittance(AVT),color properties,and integrability are equally important.The traditional Si-based photovoltaic technology is typically limited by its opaque properties for application scenarios where transparency is required.The emerging PV technologies,such as organic and perovskite photovoltaics are promising candidates for BIPV applications,owing to their advantages such as high PCE,high AVT,and tunable properties.At present,the PCE of semitransparent perovskite solar cells(ST-PSCs)has attained 14%with AVT of 22–25%;for semitransparent organic solar cells(ST-OSCs),the PCE reached 13%with AVT of almost 40%.In this review article,we summarize recent advances in material selection,optical engineering,and device architecture design for high-performance semitransparent emerging PV devices,and discuss the application of optical modeling,as well as the challenges of commercializing these semitransparent solar cells for building-integrated applications.

Systematic Review on Ground-Based Cloud Tracking Methods for Photovoltaics Nowcasting

Renewable energies are highly dependent on local weather conditions, with photovoltaic energy being particularly affected by intermittent clouds. Anticipating the impact of cloud shadows on power plants is crucial, as clouds can cause partial shading, excessive irradiation, and operational issues. This study focuses on analyzing cloud tracking methods for short-term forecasts, aiming to mitigate such impacts. We conducted a systematic literature review, highlighting the most significant articles on cloud tracking from ground-based observations. We explore both traditional image processing techniques and advances in deep learning models. Additionally, we discuss current challenges and future research directions in this rapidly evolving field, aiming to provide a comprehensive overview of the state of the art and identify opportunities for significant advancements in the next generation of cloud tracking systems based on computer vision and deep learning.

Enhancement of vertical phase separation in sequentially deposited organic photovoltaics through the independent processing of additives

Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.

Polymer Fiber Rigid Network with High Glass Transition Temperature Reinforces Stability of Organic Photovoltaics

Organic photovoltaics(OPVs)need to overcome limitations such as insufficient thermal stability to be commercialized.The reported approaches to improve stability either rely on the development of new materials or on tailoring the donor/acceptor morphology,however,exhibiting limited applicability.Therefore,it is timely to develop an easy method to enhance thermal stability without having to develop new donor/acceptor materials or donor–acceptor compatibilizers,or by introducing another third component.Herein,a unique approach is presented,based on constructing a polymer fiber rigid network with a high glass transition temperature(T_(g))to impede the movement of acceptor and donor molecules,to immobilize the active layer morphology,and thereby to improve thermal stability.A high-T_(g) one-dimensional aramid nanofiber(ANF)is utilized for network construction.Inverted OPVs with ANF network yield superior thermal stability compared to the ANF-free counterpart.The ANF network-incorporated active layer demonstrates significantly more stable morphology than the ANF-free counterpart,thereby leaving fundamental processes such as charge separation,transport,and collection,determining the device efficiency,largely unaltered.This strategy is also successfully applied to other photovoltaic systems.The strategy of incorporating a polymer fiber rigid network with high T_(g) offers a distinct perspective addressing the challenge of thermal instability with simplicity and universality.

Forestvoltaics,Floatovoltaics and Building Applied Photovoltaics(BAPV)Potential for a University Campus

The United Nations’Sustainable Development Goals(SDGs)highlight the importance of affordable and clean energy sources.Solar energy is a perfect example,being both renewable and abundant.Its popularity shows no signs of slowing down,with solar photovoltaic(PV)panels being the primary technology for converting sunlight into electricity.Advancements are continuously being made to ensure cost-effectiveness,high-performing cells,extended lifespans,and minimal maintenance requirements.This study focuses on identifying suitable locations for implementing solar PVsystems at theUniversityMalaysia PahangAl SultanAbdullah(UMPSA),Pekan campus including buildings,water bodies,and forest areas.A combined technical and economic analysis is conducted using Helioscope for simulations and the Photovoltaic Geographic Information System(PVGIS)for economic considerations.Helioscope simulation examine case studies for PV installations in forested areas,lakes,and buildings.This approach provides comprehensive estimations of solar photovoltaic potential,annual cost savings,electricity costs,and greenhouse gas emission reductions.Based on land coverage percentages,Floatovoltaics have a large solar PV capacity of 32.3 Megawatts(MW);forest-based photovoltaics(Forestvoltaics)achieve maximum yearly savings of RM 37,268,550;and Building Applied Photovoltaics(BAPV)have the lowest CO2 emissions and net carbon dioxide reduction compared to other plant sizes.It also clarifies the purpose of using both software tools to achieve a comprehensive understanding of both technical and economic aspects.

Semitransparent organic photovoltaics enabled by transparent p-type inorganic semiconductor and near-infrared acceptor

Semitransparent organic photovoltaics(STOPVs)have gained wide attention owing to their promising applications in building-integrated photovoltaics,agrivoltaics,and floating photovoltaics.Organic semiconductors with high charge carrier mobility usually have planar and conjugated structures,thereby showing strong absorption in visible region.In this work,a new concept of incorporating transparent inorganic semiconductors is proposed for high-performance STOPVs.Copper(I)thiocyanate(CuSCN)is a visible-transparent inorganic semiconductor with an ionization potential of 5.45 eV and high hole mobility.The transparency of CuSCN benefits high average visible transmittance(AVT)of STOPVs.The energy levels of CuSCN as donor match those of near-infrared small molecule acceptor BTP-eC9,and the formed heterojunction exhibits an ability of exciton dissociation.High mobility of CuSCN contributes to a more favorable charge transport channel and suppresses charge recombination.The control STOPVs based on PM6/BTP-eC9 exhibit an AVT of 19.0%with a power conversion efficiency(PCE)of 12.7%.Partial replacement of PM6 with CuSCN leads to a 63%increase in transmittance,resulting in a higher AVT of 30.9%and a comparable PCE of 10.8%.

Efficient Monolithic Perovskite/Silicon Tandem Photovoltaics

Tunable bandgaps make halide perovskites promising candidates for developing tandem solar cells(TSCs),a strategy to break the radiative limit of 33.7%for single-junction solar cells.Combining perovskites with market-dominant crystalline silicon(c-Si)is particularly attractive;simple estimates based on the bandgap matching indicate that the efficiency limit in such tandem device is as high as 46%.However,state-of-the-art perovskite/c-Si TSCs only achieve an efficiency of~32.5%,implying significant challenges and also rich opportunities.In this review,we start with the operating mechanism and efficiency limit of TSCs,followed by systematical discussions on wide-bandgap perovskite front cells,interface selective contacts,and electrical interconnection layer,as well as photon management for highly efficient perovskite/c-Si TSCs.We highlight the challenges in this field and provide our understanding of future research directions toward highly efficient and stable large-scale wide-bandgap perovskite front cells for the commercialization of perovskite/c-Si TSCs.

Modulating perovskite crystallization and band alignment using coplanar molecules for high-performance indoor photovoltaics

The proper bandgap and exceptional photostability enable CsPbI_(3) as a potential candidate for indoor photovoltaics(IPVs),but indoor power conversion efficiency(PCE) is impeded by serious nonradiative recombination stemming from challenges in incomplete DMAPbI_(3) conversion and lattice structure distortion.Here,the coplanar symmetric structu re of hexyl sulfide(HS) is employed to functionalize the CsPbI_(3) layer for fabricating highly efficient IPVs.The hydrogen bond between HS and DMAI promotes the conversion of DMAPbI_(3) to CsPbI_(3),while the copianar symmetric structure enhances crystalline order.Simultaneously,surface sulfidation during HS-induced growth results in the in situ formation of PbS,spontaneously creating a CsPbI_(3) N-P homojunction to enhance band alignment and carrier mobility.As a result,the CsPbI_(3)&HS devices achieve an impressive indoor PCE of 39.90%(P_(in):334.6 μW cm^(-2),P_(out):133.5 μW cm^(-2)) under LED@2968 K,1062 lux,and maintain over 90% initial PCE for 800 h at ^(3)0% air ambient humidity.

Evaluation of Multi-Temporal-Spatial Scale Adjustment Capability and Cluster Optimization Operation Method for Distribution Networks with Distributed Photovoltaics

Themassive integration of high-proportioned distributed photovoltaics into distribution networks poses significant challenges to the flexible regulation capabilities of distribution stations.To accurately assess the flexible regulation capabilities of distribution stations,amulti-temporal and spatial scale regulation capability assessment technique is proposed for distribution station areas with distributed photovoltaics,considering different geographical locations,coverage areas,and response capabilities.Firstly,the multi-temporal scale regulation characteristics and response capabilities of different regulation resources in distribution station areas are analyzed,and a resource regulation capability model is established to quantify the adjustable range of different regulation resources.On this basis,considering the limitations of line transmission capacity,a regulation capability assessment index for distribution stations is proposed to evaluate their regulation capabilities.Secondly,considering different geographical locations and coverage areas,a comprehensive performance index based on electrical distance modularity and active power balance is established,and a cluster division method based on genetic algorithms is proposed to fully leverage the coordination and complementarity among nodes and improve the active power matching degree within clusters.Simultaneously,an economic optimization model with the objective of minimizing the economic cost of the distribution station is established,comprehensively considering the safety constraints of the distribution network and the regulation constraints of resources.This model can provide scientific guidance for the economic dispatch of the distribution station area.Finally,case studies demonstrate that the proposed assessment and optimization methods effectively evaluate the regulation capabilities of distribution stations,facilitate the consumption of distributed photovoltaics,and enhance the economic efficiency of the distribution station area.

小梁切除术联合雷珠单抗治疗NVG疗效及对IL-6、VEGF、PEDF水平的影响

目的 分析小梁切除术联合雷珠单抗治疗新生血管性青光眼(NVG)的疗效及对白介素-6(IL-6)、血管内皮生长因子(VEGF)、色素上皮衍生因子(PEDF)水平的影响。方法 选择2013年12月至2020年12月安康市中医医院诊疗的NVG患者125例(125眼)作为本次研究对象,根据不同治疗方案分成联合治疗组(进行小梁切除术联合雷珠单抗治疗,n=66)、对照组(进行小梁切除术治疗,n=59),对比两组新生血管情况、视力、眼压、IL-6、VEGF、PEDF水平、疗效。结果 治疗后,联合治疗组BCVA高于对照组,眼压低于对照组,差异有统计学意义(P<0.05);治疗后,两组PEDF水平均升高,IL-6、VEGF水平均降低,其中联合治疗组IL-6、VEGF、PEDF水平变化更显著,差异有统计学意义(P<0.05);联合治疗组治疗总有效率(93.94%)明显高于对照组(81.36%),差异有统计学意义(P<0.05);联合组并发症发生率(16.67%)明显低于对照组(32.20%),差异有统计学意义(P<0.05)。结论 小梁切除术联合雷珠单抗治疗对NVG有明显的疗效,更有利于改善患者IL-6、VEGF、PEDF水平,安全性更高。

2型糖尿病合并白内障患者晶状体上皮细胞中PEDF和VEGF的表达及意义

目的:观察糖尿病合并年龄相关性白内障患者晶状体上皮细胞(LECs)中色素上皮衍生因子(PEDF)、血管内皮细胞生长因子(VEGF)的表达水平,探讨糖尿病合并年龄相关性白内障的发病机制。方法:回顾性研究。收集2020-08/2021-04在蚌埠医学院第一附属医院眼科就诊的年龄相关性白内障和2型糖尿病合并年龄相关性白内障患者各30例。所有患者白内障超声乳化术中收取术眼晶状体中央区5.5~6.0mm直径的前囊膜标本,采用蛋白免疫印迹法(Western-blot)检测LECs中PEDF、VEGF蛋白表达水平。实时荧光定量PCR(qRT-PCR)方法检测PEDF、VEGF mRNA的相对表达量。结果:两组患者LECs中均存在PEDF、VEGF的表达,2型糖尿病合并年龄相关性白内障组患者VEGF mRNA相对表达量为1.364±0.062,高于年龄相关性白内障组的1.000±0.0(P<0.01),PEDF mRNA的相对表达量为0.398±0.053,明显低于年龄相关性白内障组的1.000±0.0(P<0.001)。2型糖尿病合并年龄相关性白内障组患者LECs中VEGF和PEDF蛋白表达量为2.053±0.026、0.579±0.045,年龄相关性白内障组为1.680±0.064、1.058±0.007(均P<0.01)。结论:2型糖尿病合并年龄相关性白内障患者LECs中PEDF和VEGF表达水平发生变化,可能与糖尿病患者白内障的发生和发展有关。

PDTC对1型糖尿病肾病小鼠VEGF、PEDF表达的影响

目的:通过建立小鼠T1DN模型,观察对照组、T1DN组及PDTC组的实验结果,研究吡咯烷二硫氨基甲酸酯(PDTC)对血管内皮生长因子(VEGF),色素上皮衍生因子(PEDF)二者表达的影响,探讨PDTC在糖尿病早期使用对糖尿病肾病(DN)的发展影响。方法:36只SPF级雄性BALB/c小鼠,适应性喂养后随机分为对照组,T1DN组及PDTC组,每组12只,将STZ用柠檬酸缓冲液配制为20mg/mL的STZ注射液,以0.1mL/10g对T1DN组、PDTC组小鼠进行一次性腹腔注射制作1型糖尿病模型,对照组给予盐水注射,成膜后(空腹血糖≥16.7mmol/L,C肽≤0.8ng/mL),PDTC组腹腔注射PDTC 60mg/kg隔日一次,持续2周,另外两组同体积生理盐水腹腔注射。T1DN组、PDTC组连续4周出现尿微量白蛋白,C肽≤0.8ng/mL,考虑1型糖尿病肾病成膜。小鼠记录体质量后麻醉,拔眼球采血分离血清检测BUN,Cr、HbA1c,FINS,随后处死并观察肾脏,胰腺病理改变,免疫组化检测VEGF、PEDF表达水平。结果:T1DN组、PDTC组小鼠BUN,Cr、FINS及β细胞功能指数降低,HbAlc增高(P<0.05);与T1DN组相比,PDTC组小鼠BUN,Cr、FINS及β细胞功能指数升高,HbAlc降低(P<0.05)。T1DN组小鼠肾组织中VEGF的表达增高,PEDF的表达降低;PDTC组小鼠肾组织中VEGF的表达降低,PEDF的表达增高。光镜下T1DN组胰腺萎缩,胰岛数量明显减少,伴胰岛萎缩,体积变小,肾小管上皮细胞肿胀,胞浆疏松淡染,肾小管上皮细胞核肿大,肾小球毛细血管丛清晰,PDTC组病理改变轻于T1DN组。结论:PDTC在糖尿病肾病小鼠中下调VEGF、上调PEDF的表达,对1型糖尿病肾病有保护作用。

马勃油膏对白兔慢性皮肤溃疡创面愈合及血管新生相关因子VEGF、PEDF的影响

目的探讨马勃油膏对白兔慢性皮肤溃疡创面愈合情况及血管新生相关因子血管内皮生长因子(VEGF)、色素上皮源性因子(PEDF)的影响。方法24只新西兰大白兔随机分为空白对照组、模型组、阳性对照组及马勃油膏组,每组6只,以金黄色葡萄球菌制备慢性皮肤溃疡创面模型,造模后第2天起,马勃油膏组和阳性对照组白兔分别给予马勃油膏、重组牛碱性成纤维细胞生长因子凝胶治疗干预,空白对照组、模型组仅给予生理盐水清洁创面,每日1次,连续14 d。干预期间观察白兔的创面情况;在第3、7、14天时测定溃疡创面愈合率;免疫组化法、Western blot及RT-PCR检测溃疡创面组织中VEGF、PEDF表达及mRNA水平;ELISA法检测溃疡创面组织中白细胞介素-6(IL-6)、肿瘤坏死因子-α(TNF-α)水平。结果马勃油膏组白兔的溃疡创面渗出较少,红肿消退较快,用药后创面颜色加深,愈合、结痂的速度较快。马勃油膏组在第3、7、14天时溃疡创面的愈合率均显著高于模型组(P<0.05),且创面愈合率随时间呈现为增高趋势。干预14 d后,免疫组化、Western-blot及RT-PCR结果可见,马勃油膏组白兔溃疡创面组织中的VEGF表达及mRNA水平均较模型组明显减少(P<0.05),PEDF表达及mRNA水平均较模型组明显增高(P<0.05)。ELISA结果可见,马勃油膏组白兔溃疡创面组织中的IL-6、TNF-α水平均较模型组明显降低(P<0.05)。以上各指标马勃油膏组和阳性对照组之间比较,差异均未见统计学意义(P>0.05)。结论马勃油膏能够明显促进白兔慢性皮肤溃疡创面的愈合,该治疗作用可能是通过促进溃疡创面血管新生、抑制炎症反应实现的,与阳性对照药重组牛碱性成纤维细胞生长因子凝胶的治疗效用相当。

Ionic Liquid Engineering in Perovskite Photovoltaics

Over the past decade,perovskite photovoltaics have approached other currently available technologies and proven to be the most prospective type of solar cells.Although the many-sided research in this very active field has generated consistent results with regard to their undisputed consistently increasing power conversion efficiency,it also produced several rather contradictory opinions.Among other important details,debate surrounding their proneness to surface degradation and poor mechanical robustness,as well as the environmental footprint of this materials class,remains a moot point.The application of ionic liquids appears as one of the potential remedies to some of these challenges due to their high conductivity,the opportunities for chemical"tuning"of the structure,and relatively lower environmental footprint.This article provides an overview,classification,and applications of ionic liquids in perovskite solar cells.We summarize the use and role of ionic liquids as versatile additives,solvents,and modifiers in perovskite precursor solution,in charge transport layer,and in interfacial and stability engineering.Finally,challenges and the future prospects for the design and/or selection of ionic liquids with a specific profile that meets the requirements for next-generation highly efficient and stable perovskite solar cells are proposed.

Solar Photovoltaics Development in Nigeria: Drivers, Barriers, and Policies

Energy access is vital to a nation’s economic growth and its populace’s social well-being. Still, there is a lack of adequate energy in Nigeria, negatively affecting the country’s socio-economic development. Due to the inadequate energy supply, some manufacturing companies shut their operations, and most Nigerians now use backup generators (BUGs) with their attendant health hazards, environmental pollution, and global warming. The need for energy access and a sustainable energy supply through renewable energy (RE) resources necessitates adopting solar photovoltaics (PV) in Nigeria. Studies on Nigeria’s energy accessibility and sustainability are generally on RE development and a few on solar PV applications. This research covers the need for an in-depth analysis of the growth of solar PV in Nigeria, and the research question is: What factors promote or limit the adoption of solar photovoltaics in Nigeria? A method of Systematic Literature Review (SLR) and Thematic Analysis (TA) is employed for the analysis. The research findings are divided into drivers, barriers, and policies. Some identified factors promoting the adoption of solar PV are energy poverty and the urgency to improve electricity supply, the ease of its operation and maintenance, and the Nigerian government’s commitment to clean electricity supply with policy initiatives and increased awareness of solar PV applications. Conversely, some noticed factors mitigating the growth of solar PV are poor tariff systems, dual subsidies of electricity and petroleum, and lack of finance and economic incentives.

Blue phosphorene/MoSi2N4 van der Waals type-Ⅱ heterostructure:Highly efficient bifunctional materials for photocatalytics and photovoltaics

Converting solar energy into electric power or hydrogen fuel is a promising means to obtain renewable green energy.Here, we design a two-dimensional blue phosphorene(BlueP)/MoSi2N4van der Waals heterostructure(vdWH) and investigate its potential application in photocatalysis and photovoltaics using first-principles calculations. We find that the BlueP/MoSi2N4vdWH possesses type-Ⅱ band structure with a large build-in electric field, thus endowing it with a potential ability to separate photogenerated electron–hole pairs. The calculated band-edge positions show that the heterostructure is a very promising water-splitting photocatalyst. Its solar-to-hydrogen efficiency(ηSTH) can reach up to 15.8%, which is quite promising for commercial applications. Furthermore, the BlueP/MoSi2N4vdWH shows remarkably light absorption capacity and distinguished maximum power conversion efficiency(ηPCE) up to 10.61%. Remarkably, its ηPCEcan be further enhanced by the external strain: the ηPCEof 21.20% can be obtained under a 4% tensile strain. Finally, we determine that adjusting the number of the BlueP sublayer is another effective method to modulate the band gaps and band alignments of the heterostructures. These theoretical findings indicate that BlueP/MoSi2N4vd WH is a promising candidate for photocatalyst and photovoltaic device.

Energy Loss Analysis of Distributed Rooftop Photovoltaics in Industrial Parks

The analysis of the loss of distributed photovoltaic power generation systems involves the interests of energy users,energy-saving service companies,and power grid companies,so it has always been the focus of the industry and society in some manner or another.However,the related analysis for an actual case that considers different cooperative corporations’benefits is lacking in the presently available literature.This paper takes the distributed rooftop photovoltaic power generation project in an industrial park as the object,studies the analysis and calculation methods of line loss and transformer loss,analyzes the change of transformer loss under different temperatures and different load rates,and compares the data and trend of electricity consumption and power generation in industrial parks before and after the photovoltaic operation.This paper explores and practices the analysis method of the operating loss of distributed photovoltaic power generation and provides an essential reference for the benefit analysis and investment cost estimation of distributed photovoltaic power generation systems in industrial parks.The analyzed results reveal that the change loss is stable after the photovoltaic is connected,and there is no additional transformer loss.And before and after the photovoltaic system installation,there was no significant change in the total monthly data difference between the total meter and the sub-meter.

柔性光伏系统颤振性能的节段模型试验研究

柔性光伏支架的频率低、质量轻,极易在风荷载作用下发生大幅振动。以某实际柔性光伏项目为工程背景,借鉴桥梁抗风的研究经验,对该柔性光伏支架的颤振性能进行研究。首先,考虑严格的相似比关系,设计并制作了弹性悬挂节段模型系统,并对其动力特性进行了测试;然后,进行不同光伏组件倾角(-39°~+39°)下的弹性悬挂节段模型测振风洞试验,研究光伏组件风致响应随风速的变化规律,得到各倾角下柔性光伏节段模型的颤振临界风速值,探讨2种气动措施对提高柔性光伏支架颤振稳定性的效果。结果表明:在0°~39°的正倾角工况下,柔性光伏支架的颤振临界风速随光伏组件倾角的增大,呈现先减小后增大的趋势,最小颤振临界风速出现在12°~21°光伏组件倾角范围内,折算成实际风速为9.6m/s;在-39°~0°的负倾角工况下,颤振临界风速随光伏组件倾角的增大,也呈现先减小后增大的趋势,最小颤振临界风速出现在-21°~-12°光伏组件倾角范围内,折算成实际风速为10.1m/s;设置中央稳定板的气动措施难以有效提高柔性光伏支架的颤振临界风速。