Poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) composite hydrogel specimens were prepared with 15% PVA and 1%,2%, 3%, 4% and 5% HA by repeated freezing-thawing. The tests of static and dynamic mechanical properties wer...Poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) composite hydrogel specimens were prepared with 15% PVA and 1%,2%, 3%, 4% and 5% HA by repeated freezing-thawing. The tests of static and dynamic mechanical properties were carried out todiscuss the influence of different contents of HA and freezing-thawing cycles on the mechanical properties of PVA/HA compositehydrogel. The results of static mechanical tests showed that the PVA/HA composite hydrogel with 3% HA and ninefreezing-thawing cycles had excellent stress relaxation properties, higher relaxation ratio, lower stress equilibrium value andpresented better properties of creep and recovery. The results of dynamic mechanical test showed that the PVA/HA compositehydrogel with nine freezing-thawing cycles had higher storage modulus and loss modulus, so was the PVA/HA compositehydrogel with 3% HA.展开更多
The in vitro degradation characteristic of the poly D, L-lactic acid （ PDLIA ）/ hydroxyapatite （ HA ） compound were investigated. The compoundfibers were immersed in static phosphate buffer at 37℃ to degrade fo...The in vitro degradation characteristic of the poly D, L-lactic acid （ PDLIA ）/ hydroxyapatite （ HA ） compound were investigated. The compoundfibers were immersed in static phosphate buffer at 37℃ to degrade for 22 weeks. The changes in pH value of the buffer solution, the mechanical strength and morphological of inside and outside of composite fibers with degrurlation characteristic were observed. Results show that pH value of the buffer solution stabilized to aboat 7.0 before 12 weeks, however after 20 weeks that pH value quick declined. After 7 weeks that composite fibers of mechanical strength cannot mensuration. SEM observation revealed ttua bimodal degradation occurred in composite fibers.展开更多
To improve performance of PTFE-based damping material,composites with several fillers were prepared by compressing and sintering. The dynamic mechanical properties of the composites were investigated by means of visco...To improve performance of PTFE-based damping material,composites with several fillers were prepared by compressing and sintering. The dynamic mechanical properties of the composites were investigated by means of viscoanalyser. Temperature-dependent loss factors,storage modulus and loss modulus were obtained. And SEM was employed to study the compatibility between PTFE and fillers. The results show that,when blending PPS and PEEK at proper content,the loss factor curve appears double peaks,which can widen the high-damping temperature region of the composites. Blending graphite or alumina can increase the storage modulus obviously,but decrease the value of loss factor. And because graphite or alumina combines with matrix poorly,glide would happen at interface when bearing external load. The interface friction can dissipate vibration energy,which increases the loss modulus of the composites. Blending PPS,PEEK and graphite or alumina at right content,PTFE-based composites can meet demands as damping material in practical engineering.展开更多
In order to overcome the poor mechanical properties of HA and the low bioactivity of Ti, HA/Ti composites with various compositions were prepared by mechanical milling. The effects of milling condition and the composi...In order to overcome the poor mechanical properties of HA and the low bioactivity of Ti, HA/Ti composites with various compositions were prepared by mechanical milling. The effects of milling condition and the composition on the microstructure, the density and the hardness of the composites were studied. The results show that during the ball milling process, Ti particles are refined and the homogeneity of the HA/Ti mixtures is improved; HA will partially decompose due to the existence of Ti and high sintering temperature. The microstructure of HA/Ti composites is highly dependent on the milling condition and the composition. In the microstructure, Ti phase connects to be a continuous network, and HA/Ti mixtures disperse in the network. The longer the milling time, the finer the network will be. The density of HA/Ti composites decreases with the content of HA increasing and the milling time prolonging, because HA deteriorates the sinterability of Ti.The hardness of HA/Ti composites increases firstly with the content of HA increasing, and then drops when the content of HA exceeds 30%. Addition of HA will strengthen the HA/Ti composite but will decrease the density of the composite, which accounts for the effect of HA on the hardness of the composites.展开更多
Nonporous and porous C/PLA/nano-HA composites were fabricated by the process of solvent blending and freeze-drying technique, and the effect of porous structure on the mechanical properties of C/PLA/nano-HA composites...Nonporous and porous C/PLA/nano-HA composites were fabricated by the process of solvent blending and freeze-drying technique, and the effect of porous structure on the mechanical properties of C/PLA/nano-HA composites scaffold was investigated and analyzed. The results show that the effects of porous structure on the bending strength, modulus and curves of stress and strain were obvious. Compared with nonporous sample, the curves of stress and strain of porous sample show more rough, and alternative phenomenon of stress increase and stress relaxation appears. It is strongly suggested that the fracture model of C/PLA/nano-HA composites scaffold transforms from the local to global load due to the porous structure.展开更多
A three-dimensional finite element analysis was conducted to evaluate the feasibility of predicting the flexural properties of hydroxyapatite-reinforced poly-L-lactide acid （HA/PLLA） biocomposite using three differe...A three-dimensional finite element analysis was conducted to evaluate the feasibility of predicting the flexural properties of hydroxyapatite-reinforced poly-L-lactide acid （HA/PLLA） biocomposite using three different schemes. The scheme 1, originated from a beam analysis, was used to determine the flexural modulus analytically while the scheme 2 and 3 were designed to have different loading and boundary conditions using a finite element cell modeling approach. An empirical approach using Chow＇s formula and experimental data were used for comparison with the predicted results. In order to reduce the computational time and save the storage space involved in determining the effect of varying particle volume fractions on the flexural properties of HA/PLLA, a superelement technique was applied. The results using the scheme 3 and the Chow＇s formula were found to be in reasonable agreement with experimental results over the range of particle volume fraction. In addition to the Chow＇s formula, local stress distribution and the failure processes in HA/PLLA were simulated using the finite element technique.展开更多
Nano-hydroxyapatite reinforced poly（vinyl alcohol） gel（nano-HA/PVA gel） composites has been proposed as a promising biomaterial,especially used as an articular cartilage repair biomaterial.In this paper,nano-HA/PV...Nano-hydroxyapatite reinforced poly（vinyl alcohol） gel（nano-HA/PVA gel） composites has been proposed as a promising biomaterial,especially used as an articular cartilage repair biomaterial.In this paper,nano-HA/PVA gel composite was prepared by in situ synthesis method and incorporation with freeze-thaw cycle process.The microstructure and morphology were investigated by X-ray diffraction,TEM,SEM and FTIR.The results showed that the size of HA particles synthesized in PVA solution was on the nanometer scale.Both the size and crystallinity of HA particles synthesized in PVA solution decreased compared with that of HA synthesized in distilled water.The nano-HA particles were distributed in PVA matrix uniformly due to the effect of PVA solution as a dispersant while low content of HA particles in the composites.On the contrary,with high content of nano-HA particles in the composites,the particles tended to aggregate.The result of FT-IR analysis indicated that the chemical bond between nano-HA particles and PVA matrix existed.The conformation and degree of tacticity of PVA molecule changed because of the addition of HA particles.Furthermore,the interfacial strength of the composites was improved due to the interaction between nano-HA particle and PVA matrix and this was beneficial to improving the mechanical properties of the composites.展开更多
基金supported by National Natural Science Foundation of China(Grant No.50875252)Program for New Century Excellent TaIents in University (Grant No.NCET-06-0479)Natural Science Foundation of Jiangsu Proyince (Grant No.BK2008005)
文摘Poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) composite hydrogel specimens were prepared with 15% PVA and 1%,2%, 3%, 4% and 5% HA by repeated freezing-thawing. The tests of static and dynamic mechanical properties were carried out todiscuss the influence of different contents of HA and freezing-thawing cycles on the mechanical properties of PVA/HA compositehydrogel. The results of static mechanical tests showed that the PVA/HA composite hydrogel with 3% HA and ninefreezing-thawing cycles had excellent stress relaxation properties, higher relaxation ratio, lower stress equilibrium value andpresented better properties of creep and recovery. The results of dynamic mechanical test showed that the PVA/HA compositehydrogel with nine freezing-thawing cycles had higher storage modulus and loss modulus, so was the PVA/HA compositehydrogel with 3% HA.
文摘The in vitro degradation characteristic of the poly D, L-lactic acid （ PDLIA ）/ hydroxyapatite （ HA ） compound were investigated. The compoundfibers were immersed in static phosphate buffer at 37℃ to degrade for 22 weeks. The changes in pH value of the buffer solution, the mechanical strength and morphological of inside and outside of composite fibers with degrurlation characteristic were observed. Results show that pH value of the buffer solution stabilized to aboat 7.0 before 12 weeks, however after 20 weeks that pH value quick declined. After 7 weeks that composite fibers of mechanical strength cannot mensuration. SEM observation revealed ttua bimodal degradation occurred in composite fibers.
基金the National Natural Science Foundation of China (Grant No. 50575054)the Science and Technology Tackle Key Problem Plan Foun-dation of Harbin, China (Grant No. 2004AA2CG126).
文摘To improve performance of PTFE-based damping material,composites with several fillers were prepared by compressing and sintering. The dynamic mechanical properties of the composites were investigated by means of viscoanalyser. Temperature-dependent loss factors,storage modulus and loss modulus were obtained. And SEM was employed to study the compatibility between PTFE and fillers. The results show that,when blending PPS and PEEK at proper content,the loss factor curve appears double peaks,which can widen the high-damping temperature region of the composites. Blending graphite or alumina can increase the storage modulus obviously,but decrease the value of loss factor. And because graphite or alumina combines with matrix poorly,glide would happen at interface when bearing external load. The interface friction can dissipate vibration energy,which increases the loss modulus of the composites. Blending PPS,PEEK and graphite or alumina at right content,PTFE-based composites can meet demands as damping material in practical engineering.
文摘In order to overcome the poor mechanical properties of HA and the low bioactivity of Ti, HA/Ti composites with various compositions were prepared by mechanical milling. The effects of milling condition and the composition on the microstructure, the density and the hardness of the composites were studied. The results show that during the ball milling process, Ti particles are refined and the homogeneity of the HA/Ti mixtures is improved; HA will partially decompose due to the existence of Ti and high sintering temperature. The microstructure of HA/Ti composites is highly dependent on the milling condition and the composition. In the microstructure, Ti phase connects to be a continuous network, and HA/Ti mixtures disperse in the network. The longer the milling time, the finer the network will be. The density of HA/Ti composites decreases with the content of HA increasing and the milling time prolonging, because HA deteriorates the sinterability of Ti.The hardness of HA/Ti composites increases firstly with the content of HA increasing, and then drops when the content of HA exceeds 30%. Addition of HA will strengthen the HA/Ti composite but will decrease the density of the composite, which accounts for the effect of HA on the hardness of the composites.
基金Project(30870609) supported by the National Natural Science Foundation of ChinaProjects(KJ081205 KJ091213) supported by the Natural Science Foundation of Chongqing Education Committee, China
文摘Nonporous and porous C/PLA/nano-HA composites were fabricated by the process of solvent blending and freeze-drying technique, and the effect of porous structure on the mechanical properties of C/PLA/nano-HA composites scaffold was investigated and analyzed. The results show that the effects of porous structure on the bending strength, modulus and curves of stress and strain were obvious. Compared with nonporous sample, the curves of stress and strain of porous sample show more rough, and alternative phenomenon of stress increase and stress relaxation appears. It is strongly suggested that the fracture model of C/PLA/nano-HA composites scaffold transforms from the local to global load due to the porous structure.
基金Project supported by the Research Committee of the Hong Kong Polytechnic University (No.G-YX34).
文摘A three-dimensional finite element analysis was conducted to evaluate the feasibility of predicting the flexural properties of hydroxyapatite-reinforced poly-L-lactide acid （HA/PLLA） biocomposite using three different schemes. The scheme 1, originated from a beam analysis, was used to determine the flexural modulus analytically while the scheme 2 and 3 were designed to have different loading and boundary conditions using a finite element cell modeling approach. An empirical approach using Chow＇s formula and experimental data were used for comparison with the predicted results. In order to reduce the computational time and save the storage space involved in determining the effect of varying particle volume fractions on the flexural properties of HA/PLLA, a superelement technique was applied. The results using the scheme 3 and the Chow＇s formula were found to be in reasonable agreement with experimental results over the range of particle volume fraction. In addition to the Chow＇s formula, local stress distribution and the failure processes in HA/PLLA were simulated using the finite element technique.
基金Funded by the Natural Science Research of Key Projects of Anhui Provincial Universities (No. KJ2010A099)
文摘Nano-hydroxyapatite reinforced poly（vinyl alcohol） gel（nano-HA/PVA gel） composites has been proposed as a promising biomaterial,especially used as an articular cartilage repair biomaterial.In this paper,nano-HA/PVA gel composite was prepared by in situ synthesis method and incorporation with freeze-thaw cycle process.The microstructure and morphology were investigated by X-ray diffraction,TEM,SEM and FTIR.The results showed that the size of HA particles synthesized in PVA solution was on the nanometer scale.Both the size and crystallinity of HA particles synthesized in PVA solution decreased compared with that of HA synthesized in distilled water.The nano-HA particles were distributed in PVA matrix uniformly due to the effect of PVA solution as a dispersant while low content of HA particles in the composites.On the contrary,with high content of nano-HA particles in the composites,the particles tended to aggregate.The result of FT-IR analysis indicated that the chemical bond between nano-HA particles and PVA matrix existed.The conformation and degree of tacticity of PVA molecule changed because of the addition of HA particles.Furthermore,the interfacial strength of the composites was improved due to the interaction between nano-HA particle and PVA matrix and this was beneficial to improving the mechanical properties of the composites.
