In the heterogeneous reservoirs,CO_(2) flooding easily leads to CO_(2) gas channeling,which can seriously affect sweeping efficiency and reduce oil recovery.After thoroughly investigating the advantages and shortcomin...In the heterogeneous reservoirs,CO_(2) flooding easily leads to CO_(2) gas channeling,which can seriously affect sweeping efficiency and reduce oil recovery.After thoroughly investigating the advantages and shortcomings of various CO_(2) plugging technologies,this paper focuses on the feasibility of improving conventional water-alternating gas(WAG)through CO_(2)-responsive gel materials.Based on the different chemical reaction mechanisms between the unique chemical structure and CO_(2),changes in the material’s physical and chemical properties can respond to CO_(2).The feasibility of utilizing these property changes for CO_(2)-responsive plugging is explored.Various CO_(2)-responsive gels and gel nanoparticles have been extensively researched in different fields,such as energy,medicine,and biology.This paper surveys the molecular structures,chemical compositions,response mechanisms,and changes of these CO_(2)-responsive gels,aiming to draw insights into the carbon dioxide-enhanced oil recovery(CO_(2)-EOR)field.Finally,the key issues and future development direction of CO_(2)-responsive plugging gels were analyzed.展开更多
Undesirable gas channeling always occurs along the high-permeability layers in heterogeneous oil reservoirs during water-alternating-CO_(2)(WAG)flooding,and conventional polymer gels used for blocking the“channeling...Undesirable gas channeling always occurs along the high-permeability layers in heterogeneous oil reservoirs during water-alternating-CO_(2)(WAG)flooding,and conventional polymer gels used for blocking the“channeling”paths usually suffer from either low injectivity or poor gelation control.Herein,we for the first time developed an in-situ high-pressure CO_(2)-triggered gel system based on a smart surfactant,N-erucamidopropyl-N,N-dimethylamine(UC22AMPM),which was introduced into the aqueous slugs to control gas channeling inWAG processes.The water-like,low-viscosity UC22AMPM brine solution can be thickened by high-pressure CO_(2) owing to the formation of wormlike micelles(WLMs),as well as their growth and shear-induced structure buildup under shear flow.The thickening power can be further potentiated by the generation of denser WLMs resulting from either surfactant concentration augmentation or a certain range of heating,and can be impaired via pressurization above the critical pressure of CO_(2) because of its soaring solvent power.Core flooding tests using heterogeneous cores demonstrated that gas channeling was alleviated by plugging of high-capacity channels due to the in-situ gelation of UC22AMPM slugs upon their reaction with the pre-or post-injected CO_(2) slugs under shear flow,thereupon driving chase fluids into unrecovered low-permeability areas and producing an 8.0% higher oil recovery factor than the conventional WAG mode.This smart surfactant enabled high injectivity and satisfactory gelation control,attributable to low initial viscosity and the combined properties of one component and CO_(2)-triggered gelation,respectively.This work could provide a guide towards designing gels for reducing CO_(2) spillover and reinforcing the CO_(2) sequestration effect during CO_(2) enhanced oil recovery processes.展开更多
A mesoporous UiO-66-NH_(2) aerogel is prepared via a straightforward sol-gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-amino...A mesoporous UiO-66-NH_(2) aerogel is prepared via a straightforward sol-gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-aminoterephthalic acid. The novel UiO-66-NH_(2) aerogel also exhibits high specific surface area and mesopore-dominated structure, implying its highly potential use in CO_(2) adsorption. For ulteriorly investigating the effect of amine loading on the CO_(2) adsorption ability, a series of UiO-66-NH_(2) aerogel with different amino content is fabricated by changing the ligand/metal molar ratio. When the molar ratio is 1.45, the CO_(2) adsorption capacity reaches the optimum value of 2.13 mmol·g^(-1) at 25 ℃ and 0.1 MPa, which is 12.2% higher than that of pure UiO-66 aerogel. Additionally, UiO-66-NH_(2)-1.45 aerogel also has noticeable CO_(2) selectivity against N_(2) and CH_(4) as well as good regeneration stability. Such results imply that it has good application prospect in the field of CO_(2) adsorption, and also contains the potential to be applied in catalysis, separation and other fields.展开更多
Nanoparticles have been widely used in polymer gel systems in recent years to improve gelation performance under high-temperature reservoir conditions. However, different types of nanoparticles have different effects ...Nanoparticles have been widely used in polymer gel systems in recent years to improve gelation performance under high-temperature reservoir conditions. However, different types of nanoparticles have different effects on their gelation performance, which has been little researched. In this study, the high-temperature gelation performance, chemical structure, and microstructure of polymer gels prepared from two nanomaterials (i.e., nano-SiO_(2) and nano-TiO_(2)) were measured. The conventional HPAM/PEI polymer gel system was employed as the control sample. Results showed that the addition of nano-TiO_(2) could significantly enhance the gel strength of HPAM/PEI gel at 80 ℃. The gel strength of the enhanced HPAM/PEI gel with 0.1 wt% nano-TiO_(2) could reach grade I. The system also had excellent high-temperature stability at 150 ℃. The enhanced HPAM/PEI gel with 0.02 wt% nano-TiO_(2) reached the maximum gel strength at 150 ℃ with a storage modulus (G′) of 15 Pa, which can meet the need for efficient plugging. However, the nano-SiO_(2) enhanced HPAM/PEI polymer gel system showed weaker gel strength than that with nano-TiO_(2) at both 80 and 150 ℃ with G′ lower than 5 Pa. Microstructures showed that the nano-TiO_(2) enhanced HPAM/PEI gel had denser three-dimensional (3D) mesh structures, which makes the nano-TiO_(2) enhanced HPAM/PEI gel more firmly bound to water. The FT-IR results also confirmed that the chemical structure of the nano-TiO_(2) enhanced HPAM/PEI gel was more thermally stable than nano-SiO_(2) since there was a large amount of –OH groups on the structure surface. Therefore, nano-TiO_(2) was more suitable as the reinforcing material for HPAM/PEI gels for high-temperature petroleum reservoir conformance improvement.展开更多
基金Supported by the Open Fund Project of Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering(YQZC202105)Yangtze University Student Innovation Program(Yz2022018).
文摘In the heterogeneous reservoirs,CO_(2) flooding easily leads to CO_(2) gas channeling,which can seriously affect sweeping efficiency and reduce oil recovery.After thoroughly investigating the advantages and shortcomings of various CO_(2) plugging technologies,this paper focuses on the feasibility of improving conventional water-alternating gas(WAG)through CO_(2)-responsive gel materials.Based on the different chemical reaction mechanisms between the unique chemical structure and CO_(2),changes in the material’s physical and chemical properties can respond to CO_(2).The feasibility of utilizing these property changes for CO_(2)-responsive plugging is explored.Various CO_(2)-responsive gels and gel nanoparticles have been extensively researched in different fields,such as energy,medicine,and biology.This paper surveys the molecular structures,chemical compositions,response mechanisms,and changes of these CO_(2)-responsive gels,aiming to draw insights into the carbon dioxide-enhanced oil recovery(CO_(2)-EOR)field.Finally,the key issues and future development direction of CO_(2)-responsive plugging gels were analyzed.
基金Financial support from the Natural Science Foundation of Sichuan Province(2022NSFSC0030)National Natural Science Foundation of China(U1762218)is gratefully acknowledged.
文摘Undesirable gas channeling always occurs along the high-permeability layers in heterogeneous oil reservoirs during water-alternating-CO_(2)(WAG)flooding,and conventional polymer gels used for blocking the“channeling”paths usually suffer from either low injectivity or poor gelation control.Herein,we for the first time developed an in-situ high-pressure CO_(2)-triggered gel system based on a smart surfactant,N-erucamidopropyl-N,N-dimethylamine(UC22AMPM),which was introduced into the aqueous slugs to control gas channeling inWAG processes.The water-like,low-viscosity UC22AMPM brine solution can be thickened by high-pressure CO_(2) owing to the formation of wormlike micelles(WLMs),as well as their growth and shear-induced structure buildup under shear flow.The thickening power can be further potentiated by the generation of denser WLMs resulting from either surfactant concentration augmentation or a certain range of heating,and can be impaired via pressurization above the critical pressure of CO_(2) because of its soaring solvent power.Core flooding tests using heterogeneous cores demonstrated that gas channeling was alleviated by plugging of high-capacity channels due to the in-situ gelation of UC22AMPM slugs upon their reaction with the pre-or post-injected CO_(2) slugs under shear flow,thereupon driving chase fluids into unrecovered low-permeability areas and producing an 8.0% higher oil recovery factor than the conventional WAG mode.This smart surfactant enabled high injectivity and satisfactory gelation control,attributable to low initial viscosity and the combined properties of one component and CO_(2)-triggered gelation,respectively.This work could provide a guide towards designing gels for reducing CO_(2) spillover and reinforcing the CO_(2) sequestration effect during CO_(2) enhanced oil recovery processes.
基金supported by the National Natural Science Foundation of China (21603125)Science-Education-Industry Integration Innovation Pilot Project of Qilu University of Technology (2020KJC-GH13)+2 种基金International Cooperation Project of Shandong Academy of Sciences (2019GHPY09)Natural Science Foundation of Shandong Province (ZR2019BEM025)Young doctor Cooperation Foundation of Qilu University of Technology (Shandong Academy of Sciences) (2019BSHZ0016)。
文摘A mesoporous UiO-66-NH_(2) aerogel is prepared via a straightforward sol-gel method without using any binders or mechanical pressures, in which the amine groups are directly introduced into the matrix by using 2-aminoterephthalic acid. The novel UiO-66-NH_(2) aerogel also exhibits high specific surface area and mesopore-dominated structure, implying its highly potential use in CO_(2) adsorption. For ulteriorly investigating the effect of amine loading on the CO_(2) adsorption ability, a series of UiO-66-NH_(2) aerogel with different amino content is fabricated by changing the ligand/metal molar ratio. When the molar ratio is 1.45, the CO_(2) adsorption capacity reaches the optimum value of 2.13 mmol·g^(-1) at 25 ℃ and 0.1 MPa, which is 12.2% higher than that of pure UiO-66 aerogel. Additionally, UiO-66-NH_(2)-1.45 aerogel also has noticeable CO_(2) selectivity against N_(2) and CH_(4) as well as good regeneration stability. Such results imply that it has good application prospect in the field of CO_(2) adsorption, and also contains the potential to be applied in catalysis, separation and other fields.
基金supported by the Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2022D01A250)the CNPC Strategic Cooperation Science and Technology Project(ZLZX2020-01-04-04).
文摘Nanoparticles have been widely used in polymer gel systems in recent years to improve gelation performance under high-temperature reservoir conditions. However, different types of nanoparticles have different effects on their gelation performance, which has been little researched. In this study, the high-temperature gelation performance, chemical structure, and microstructure of polymer gels prepared from two nanomaterials (i.e., nano-SiO_(2) and nano-TiO_(2)) were measured. The conventional HPAM/PEI polymer gel system was employed as the control sample. Results showed that the addition of nano-TiO_(2) could significantly enhance the gel strength of HPAM/PEI gel at 80 ℃. The gel strength of the enhanced HPAM/PEI gel with 0.1 wt% nano-TiO_(2) could reach grade I. The system also had excellent high-temperature stability at 150 ℃. The enhanced HPAM/PEI gel with 0.02 wt% nano-TiO_(2) reached the maximum gel strength at 150 ℃ with a storage modulus (G′) of 15 Pa, which can meet the need for efficient plugging. However, the nano-SiO_(2) enhanced HPAM/PEI polymer gel system showed weaker gel strength than that with nano-TiO_(2) at both 80 and 150 ℃ with G′ lower than 5 Pa. Microstructures showed that the nano-TiO_(2) enhanced HPAM/PEI gel had denser three-dimensional (3D) mesh structures, which makes the nano-TiO_(2) enhanced HPAM/PEI gel more firmly bound to water. The FT-IR results also confirmed that the chemical structure of the nano-TiO_(2) enhanced HPAM/PEI gel was more thermally stable than nano-SiO_(2) since there was a large amount of –OH groups on the structure surface. Therefore, nano-TiO_(2) was more suitable as the reinforcing material for HPAM/PEI gels for high-temperature petroleum reservoir conformance improvement.
