The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hyd...The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.展开更多
An indium tin oxide(ITO)electrode coated with monolayer TiO2/[Ru(phen)2(dC18bpy)] 2+ (phen=1,10-phenanthroline, dC18bpy=4,4′-dioctadecyl-2,2′-bipyridyl)hybrid film(denoted as ITO/TiO2-Ru)has been prepared using the ...An indium tin oxide(ITO)electrode coated with monolayer TiO2/[Ru(phen)2(dC18bpy)] 2+ (phen=1,10-phenanthroline, dC18bpy=4,4′-dioctadecyl-2,2′-bipyridyl)hybrid film(denoted as ITO/TiO2-Ru)has been prepared using the modified Langmuir-Blodgett(LB)method,and the electrocatalytic oxidation of mononucleotide of guanosine 5′-monophosphate(GMP)on an ITO/TiO2-Ru electrode after Pd-photodeposition(denoted as ITO/TiO2-Ru/Pd)has been studied.Atomic force microscopy reveals that the single-layered hybrid film of TiO2 nanosheets/[Ru(phen)2(dC18bpy)] 2+is closely packed at a surface pressure of 25 mN m 1and has a thickness of(3.20±0.5)nm.X-ray photoelectron spectra show the formation of Pd nanoparticles on the surface of hybrid film with radii of 20–200 nm by the reduction of[Pd(NH3)4] 2+ under light irradiation.When it is applied to oxidize GMP,a larger catalytic oxidative current is achieved on the ITO/TiO2-Ru/Pd electrode at the external potential above 700 mV(vs.Ag|AgCl|KCl)in comparison with the naked ITO electrode and ITO/TiO2-Ru electrode.Such a result indicates that the Pd nanoparticles are able to hamper the combination of electron hole pairs and reduce the counterwork of insulating long alkyl chains of amphiphilic Ru(II)complexes,and thus develops the electron transfer efficiency and produces the enhanced redox current.展开更多
The homogeneous electrocatalytic oxidation of hydrazine（HZ） has been studied by indigocarmine（IND） as a mediator at the surface of TiO_2 nanoparticles modified carbon paste electrode（TNMCPE）.Cyclic voltammetry w...The homogeneous electrocatalytic oxidation of hydrazine（HZ） has been studied by indigocarmine（IND） as a mediator at the surface of TiO_2 nanoparticles modified carbon paste electrode（TNMCPE）.Cyclic voltammetry was used to study the electrochemical behavior of IND at different scan rates.The voltammetric response of the modified electrode was linear against the concentration of HZ in the ranges of 3.0×l0^（-8）-7.0×10~6 mol/L with differential pulse voltammetry method.The detection limit（3σ） was determined as 27.3 nmol/L.To evaluate the applicability of the proposed method to real samples,the modified CPE was applied to the determination of HZ in water samples.展开更多
Nano-Al2O3 particles modified Ag Cu Ni filler was adopted to braze the SiO2 ceramic and TC4.The effects of filler size as well as the brazing temperature on the interfacial microstructure and mechanical property of th...Nano-Al2O3 particles modified Ag Cu Ni filler was adopted to braze the SiO2 ceramic and TC4.The effects of filler size as well as the brazing temperature on the interfacial microstructure and mechanical property of the joints were investigated.Nanoscale filler reduced the phases dimension and promoted the homogeneous distribution of microstructure,obtaining a higher joint strength when compared to microscale filler.The increase of brazing temperature made the accelerating dissolution and diffusion of Ti,which promoted the increase of thickness of Ti4O7+TiSi2 layer adjacent to SiO2 ceramic and diffusion layer zone nearby TC4 alloy.The hypoeutectic structure was produced in the brazing seam due to the high Ti content.The maximum shear strength of^40 MPa was obtained at 950°C for 10 min.展开更多
The preparation of a glassy carbon electrode modified by CeO2 nanoparticles was described, which was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. In pH 6.0 buffer, the CeO2 nanoparti...The preparation of a glassy carbon electrode modified by CeO2 nanoparticles was described, which was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. In pH 6.0 buffer, the CeO2 nanoparticle modified electrode （CeO2 NP/GC） gave an excellent electrocatalytic activity for the oxidation of uric acid （UA）. The catalytic current of UA versus its concentration had a good linear relation in the range of 2.0 × 10^-7-5.0 × 10^- 4 mol/L, with the correlation coefficient of 0.9986 and detection limit of 1.0 ×10^-7 mol/L. The modified electrode can be used for the determination of UA in urine, which can tolerate the interference of ascorbic acid up to 1000-fold. The method was simple, quick and sensitive.展开更多
文摘The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.
基金supported by the National Natural Science Foundation of China(21073133,20843007,20471043)Zhejiang Provincial Natural Science Foundation of China(Y5100283,Y4090248,Y4080177)Wenzhou University Foundation(2007L019)
文摘An indium tin oxide(ITO)electrode coated with monolayer TiO2/[Ru(phen)2(dC18bpy)] 2+ (phen=1,10-phenanthroline, dC18bpy=4,4′-dioctadecyl-2,2′-bipyridyl)hybrid film(denoted as ITO/TiO2-Ru)has been prepared using the modified Langmuir-Blodgett(LB)method,and the electrocatalytic oxidation of mononucleotide of guanosine 5′-monophosphate(GMP)on an ITO/TiO2-Ru electrode after Pd-photodeposition(denoted as ITO/TiO2-Ru/Pd)has been studied.Atomic force microscopy reveals that the single-layered hybrid film of TiO2 nanosheets/[Ru(phen)2(dC18bpy)] 2+is closely packed at a surface pressure of 25 mN m 1and has a thickness of(3.20±0.5)nm.X-ray photoelectron spectra show the formation of Pd nanoparticles on the surface of hybrid film with radii of 20–200 nm by the reduction of[Pd(NH3)4] 2+ under light irradiation.When it is applied to oxidize GMP,a larger catalytic oxidative current is achieved on the ITO/TiO2-Ru/Pd electrode at the external potential above 700 mV(vs.Ag|AgCl|KCl)in comparison with the naked ITO electrode and ITO/TiO2-Ru electrode.Such a result indicates that the Pd nanoparticles are able to hamper the combination of electron hole pairs and reduce the counterwork of insulating long alkyl chains of amphiphilic Ru(II)complexes,and thus develops the electron transfer efficiency and produces the enhanced redox current.
文摘The homogeneous electrocatalytic oxidation of hydrazine（HZ） has been studied by indigocarmine（IND） as a mediator at the surface of TiO_2 nanoparticles modified carbon paste electrode（TNMCPE）.Cyclic voltammetry was used to study the electrochemical behavior of IND at different scan rates.The voltammetric response of the modified electrode was linear against the concentration of HZ in the ranges of 3.0×l0^（-8）-7.0×10~6 mol/L with differential pulse voltammetry method.The detection limit（3σ） was determined as 27.3 nmol/L.To evaluate the applicability of the proposed method to real samples,the modified CPE was applied to the determination of HZ in water samples.
基金supported by National Natural Science Foundation of China(Grant Nos.51505105,51875130 and 51775138)the Key Research&Development Program of Shandong Province(No.2017GGX40103).
文摘Nano-Al2O3 particles modified Ag Cu Ni filler was adopted to braze the SiO2 ceramic and TC4.The effects of filler size as well as the brazing temperature on the interfacial microstructure and mechanical property of the joints were investigated.Nanoscale filler reduced the phases dimension and promoted the homogeneous distribution of microstructure,obtaining a higher joint strength when compared to microscale filler.The increase of brazing temperature made the accelerating dissolution and diffusion of Ti,which promoted the increase of thickness of Ti4O7+TiSi2 layer adjacent to SiO2 ceramic and diffusion layer zone nearby TC4 alloy.The hypoeutectic structure was produced in the brazing seam due to the high Ti content.The maximum shear strength of^40 MPa was obtained at 950°C for 10 min.
基金Project supported by the National Natural Science Foundation of China （No. 20675001）, Anhui Provincial Natural Science Foundation （No. 050460301） and the Science Foundation of Education 0ffice of Anhui Province （Nos. 2006kj145B and 2006kj119B）.
文摘The preparation of a glassy carbon electrode modified by CeO2 nanoparticles was described, which was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. In pH 6.0 buffer, the CeO2 nanoparticle modified electrode （CeO2 NP/GC） gave an excellent electrocatalytic activity for the oxidation of uric acid （UA）. The catalytic current of UA versus its concentration had a good linear relation in the range of 2.0 × 10^-7-5.0 × 10^- 4 mol/L, with the correlation coefficient of 0.9986 and detection limit of 1.0 ×10^-7 mol/L. The modified electrode can be used for the determination of UA in urine, which can tolerate the interference of ascorbic acid up to 1000-fold. The method was simple, quick and sensitive.
