An intelligent control method based on artificial neural network for numerical flight simulation of the basic finner projectile with pitching maneuver

In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application.

A fuzzy control and neural network based rotor speed controller for maximum power point tracking in permanent magnet synchronous wind power generation system

When the wind speed changes significantly in a permanent magnet synchronous wind power generation system,the maximum power point cannot be easily determined in a timely manner.This study proposes a maximum power reference signal search method based on fuzzy control,which is an improvement to the climbing search method.A neural network-based parameter regulator is proposed to address external wind speed fluctuations,where the parameters of a proportional-integral controller is adjusted to accurately monitor the maximum power point under different wind speed conditions.Finally,the effectiveness of this method is verified via Simulink simulation.

Rotation Angle Control Strategy for Telescopic Flexible Manipulator Based on a Combination of Fuzzy Adjustment and RBF Neural Network

The length of fexible manipulators with a telescopic arm alters during movement.The dynamic parameters of telescopic fexible manipulators exhibit signifcant time-varying characteristics owing to variations in length.With an increase in the manipulators’length,the nonlinear terms caused by fexibility in the manipulators’dynamic equations cannot be ignored.The time-varying characteristics and nonlinear terms of telescopic fexible manipulators cause fuctuations in rotation angles,which afect the operation accuracy of end-efectors.In this study,a control strategy based on a combination of fuzzy adjustment and an RBF neural network is utilized to improve the control accuracy of fexible telescopic manipulators.First,the dynamic equation of the manipulators is established using the assumed mode method and Lagrange’s principle,and the infuence of nonlinear terms is analyzed.Subsequently,a combined control strategy is proposed to suppress the fuctuation of the rotation angle in telescopic fexible manipulators.The variation ranges of the feedforward PD controller parameters are determined by the pole placement strategy and length of the manipulators.Fuzzy rules are utilized to adjust the controller parameters in real-time.The RBF neural network is utilized to identify and compensate the uncertain part of the dynamic model of the fexible manipulators.The uncertain part comprises time-varying parameters and nonlinear terms.Finally,numerical simulations and prototype experiments prove the efectiveness of the combined control strategy.The results prove that the proposed control strategy has a smaller standard deviation of errors.Therefore,the combined control strategy is more suitable for telescopic fexible manipulators,which can efectively improve the control accuracy of rotation angles.

Adaptive control of parallel manipulators via fuzzy-neural network algorithm

This paper considers adaptive control of parallel manipulators combined with fuzzy-neural network algorithms （FNNA）. With this algorithm, the robustness is guaranteed by the adaptive control law and the parametric uncertainties are eliminated. FNNA is used to handle model uncertainties and external disturbances. In the proposed control scheme, we consider modifying the weight of fuzzy rules and present these rules to a MIMO system of parallel manipulators with more than three degrees-of-freedom （DoF）. The algorithm has the advantage of not requiring the inverse of the Jacobian matrix especially for the low DoF parallel manipulators. The validity of the control scheme is shown through numerical simulations of a 6-RPS parallel manipulator with three DoF.

Fuzzy Control System of Hydraulic Roll Bending Based on Genetic Neural Network

For nonlinear hydraulic roll bending control, a new fuzzy intelligent control method was proposed based on the genetic neural network. The method taking account of dynamic and static characteristics of control system has settled the problems of recognizing and controlling the unknown, uncertain and nonlinear system successfully, and has been applied to hydraulic roll bending control. The simulation results indicate that the system has good performance and strong robustness, and is better than traditional PID and neural-fuzzy control. The method is an effective tool to control roll bending force with increased dynamic response speed of control system and enhanced tracking accuracy.

A Fuzzy-Neural Network Control of Nonlinear Dynamic Systems

In this paper, an adaptive dynamic control scheme based on a fuzzy neural network is presented, that presents utilizes both feed-forward and feedback controller elements. The former of the two elements comprises a neural network with both identification and control role, and the latter is a fuzzy neural algorithm, which is introduced to provide additional control enhancement. The feedforward controller provides only coarse control, whereas the feedback controller can generate on-line conditional proposition rule automatically to improve the overall control action. These properties make the design very versatile and applicable to a range of industrial applications.

FUZZY NEURAL NETWORK CONTROL FOR VIBRATION WAVEFORM SYSTEM OF MOLD

Combining with the characteristic of the fuzzy control and the neural networkcontrol(NNC), a new kind of the fuzzy neural network controller is proposed, and the synthesisdesign method of the control law and fast speed learning algorithm of the parameters of networks areput forward. The output of the controller is composed of two parts, part one is derived on basis ofthe principle of sliding control, the lower order model and the estimated parameters of the plantare only required, part two is derived on basis FNN, it is used to compensate the uncertainties ofthe systems. Because new type of FNN controller extracts from the advantages of the intelligentcontrol and model based sliding mode control, the numbers of adjusting parameters and the structureof FNN are simplified at large, and the practical significance and variation range are attached toeach layer of the network and its connected weights, the control performance and learning speed areincreased at large. The Tightness of the conclusions is verified by the experiment of anelectro-hydraulic position servo system of the mold of the continuous casting machinery.

Stochastic asymptotical synchronization of chaotic Markovian jumping fuzzy cellular neural networks with mixed delays and the Wiener process based on sampled-data control

We investigate the stochastic asymptotical synchronization of chaotic Markovian jumping fuzzy cellular neural networks （MJFCNNs） with discrete, unbounded distributed delays, and the Wiener process based on sampled-data control using the linear matrix inequality （LMI） approach. The Lyapunov–Krasovskii functional combined with the input delay approach as well as the free-weighting matrix approach is employed to derive several sufficient criteria in terms of LMIs to ensure that the delayed MJFCNNs with the Wiener process is stochastic asymptotical synchronous. Restrictions （e.g., time derivative is smaller than one） are removed to obtain a proposed sampled-data controller. Finally, a numerical example is provided to demonstrate the reliability of the derived results.

Strip Thickness Control of Cold Rolling Mill with Roll Eccentricity Compensation by Using Fuzzy Neural Network

In rolling mill, the accuracy and quality of the strip exit thickness are very important factors. To realize high accuracy in the strip exit thickness, the Automatic Gauge Control (AGC) system is used. Because of roll eccentricity in backup rolls, the exit thickness deviates periodically. In this paper, we design PI controller in outer loop for the strip exit thickness while PD controller is used in inner loop for the work roll actuator position. Also, in order to reduce the periodic thickness deviation, we propose roll eccentricity compensation by using Fuzzy Neural Network with online tuning. Simulink model for the overall system has been implemented using MATLAB/SIMULINK software. The simulation results show the effectiveness of the proposed control.

Fuzzy neural network control of underwater vehicles based on desired state programming

Due to the nonlinearity and uncertainty, the precise control of underwater vehicles in some intelligent operations hasn’t been solved very well yet. A novel method of control based on desired state programming was presented, which used the technique of fuzzy neural network. The structure of fuzzy neural network was constructed according to the moving characters and the back propagation algorithm was deduced. Simulation experiments were conducted on general detection remotely operated vehicle. The results show that there is a great improvement in response and precision over traditional control, and good robustness to the model’s uncertainty and external disturbance, which has theoretical and practical value.

Intelligent Flow Control Technique of ABR Service in ATM Networks Based on Fuzzy Neural Networks

ＩｎｔｅｌｉｇｅｎｔＦｌｏｗＣｏｎｔｒｏｌＴｅｃｈｎｉｑｕｅｏｆＡＢＲＳｅｒｖｉｃｅｉｎＡＴＭＮｅｔｗｏｒｋｓＢａｓｅｄｏｎＦｕｚｚｙＮｅｕｒａｌＮｅｔｗｏｒｋｓ①ＺｈａｎｇＬｉａｎｇｊｉｅＬｉＹａｎｄａＬｉＱｉｎｇｈｕａＷａｎｇＰｕ（ＤｅｐｔｏｆＡ...

Comparative Study of Conventional, Fuzzy Logic and Neural PID Speed Controllers with Torque Ripple Minimization for an Axial Magnetic Flux Switched Reluctance Motor

Three speed controllers for an axial magnetic flux switched reluctance motor with only one stator, are described and experimentally tested. As it is known, when current pulses are imposed in their windings, high ripple torque is obtained. In order to reduce this ripple, a control strategy with modified current shapes is proposed. A workbench consisting of a machine prototype and the control system based on a microcontroller was built. These controllers were: a conventional PID, a fuzzy logic PID and a neural PID type. From experimental results, the effective reduction of the torque ripple was confirmed and the performance of the controllers was compared.

Application of PID Controller Based on BP Neural Network in Export Steam’s Temperature Control System

By combining the Back-Propagation(BP)neural network with conventional proportional Integral Derivative(PID)controller,a new temperature control strategy of the export steam in supercritical electric power plant is put forward.This scheme can effectively overcome the large time delay,inertia of the export steam and the influence of object in varying operational parameters.Thus excellent control quality is obtained.The present paper describes the development and application of neural network based controller to control the temperature of the boiler’s export steam.Through simulation in various situations,it validates that the control quality of this control system is apparently superior to the conventional PID control system.

Fault-Tolerant Control of Nonlinear Systems Based on Fuzzy Neural Networks

Due to its great potential value in theory and application,fault-tolerant control strategies of nonlinear systems,especially combining with intelligent control methods,have been a focus in the academe.A fault-tolerant control method based on fuzzy neural networks was presented for nonlinear systems in this paper.The fault parameters were designed to detect the fault,adaptive updating method was introduced to estimate and track fault,and fuzzy neural networks were used to adjust the fault parameters and construct automated fault diagnosis.And the fault compensation control force,which was given by fault estimation,was used to realize adaptive fault-tolerant control.This framework leaded to a simple structure,an accurate detection,and a high robustness.The simulation results in induction motor show that it is still able to work well with high dynamic performance and control precision under the condition of motor parameters' variation fault and load torque disturbance.

Application of Neural network PID Controller in Constant Temper-ature and Constant Liquid-level System

Guided by the principle of neural network, an intelligent PID controller based on neural network is devised and applied to control of constant temperature and constant liquidlevel system. The experiment results show that this controller has high accuracy and strong robustness and good characters.

Application of neural networks and fuzzy control to the welding robot

Intelligent control is applied in welding robot. The neural network was used for detecting the deviation of the torch from the center of the gap. The robot tracing the welding line with the fuzzy controller. The proposed method was successfully used to seam tracking in V groove weld configuration .

Self-learning fuzzy neural network control for backside width of weld pool in pulsed GTAW with wire filler

The weld pool shape control by intelligent strategy was studied. In order to improve the ability of self-learning and self-adaptation of the ordinary fuzzy control, a self-learning fuzzy neural network controller (FNNC) for backside width of weld pool in pulsed gas tungsten arc welding (GTAW) with wire filler was designed. In FNNC, the fuzzy system was expressed by an equivalence neural network, the membership functions and inference rulers were decided through the learning of the neural network. Then, the FNNC control arithmetic was analyzed, simulating experiment was done, and the validating experiments on varied heat sink workpiece and varied gap workpiece were implemented. The maximum error between the real value and the given one was 0.39mm, the mean error was 0.014mm, and the root-mean-square was 0.14mm. The real backside width was maintained around the given value. The results show that the self-learning fuzzy neural network control strategy can achieve a perfect control effect under different set values and conditions, and is suitable for the welding process with the varied structure and coefficients of control model.

Fuzzy neural networks for control of penetration depthduring GTAW

An intelligent system including both a neural network(NN) and a self adjusting fuzzy controller(FC) for modeling and control of the penetration depth during gas tungsten arc welding(GTAW) process is presented in this paper. The discussion is mainly focused on two parts. One is the modeling of the penetration depth with NN. A visual sensor CCD is used to obtain the image of the molten pool. A neural network model is established to estimate the penetration depth from the welding current, pool width and seam gap. It is demonstrated that the proposed neural network can produce highly complex nonlinear multi variable model of the GTAW process that offer the accurate prediction of welding penetration depth. Another is the control for the penetration depth with FC.A self adjusting fuzzy controller is proposed,which used for controlling the penetration depth.The control parameters are adjusted on line automatically according to the controlling errors of penetration and the errors can be decreased sharply. The effectiveness of the proposed intelligent methods is demonstrated by the real experiments and the improved performance results are obtained.

Research on the controller of an arc welding process based on a PID neural network

A controller based on a PID neural network （PIDNN） is proposed for an arc welding power source whose output characteristic in responding to a given value is quickly and intelligently controlled in the welding process. The new method syncretizes the PID control strategy and neural network to control the welding process intelligently, so it has the merit of PID control rules and the trait of better information disposal ability of the neural network. The results of simulation show that the controller has the properties of quick response, low overshoot, quick convergence and good stable accuracy, which meet the requirements for control of the welding process.