Tuning PID Parameters Based on a Combination of the Expert System and the Improved Genetic Algorithms

a new strategy combining an expert system and improved genetic algorithms is presented for tuning proportional-integral-derivative （PID） parameters for petrochemical processes. This retains the advantages of genetic algorithms, namely rapid convergence and attainment of the global optimum. Utilization of an orthogonal experiment method solves the determination of the genetic factors. Combination with an expert system can make best use of the actual experience of the plant operators. Simulation results of typical process systems examples show a good control performance and robustness.

Research on Anti-Fluctuation Control of Winding Tension System Based on Feedforward Compensation

In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tension output,this paper proposed a tension fluctuation rejection strategy based on feedforward compensation.In addition to the bias harmonic curve of the unknown state,the tension fluctuation also contains the influence of bounded noise.A tension fluctuation observer(TFO)is designed to cancel the uncertain periodic signal,in which the frequency generator is used to estimate the critical parameter information.Then,the fluctuation signal is reconstructed by a third-order auxiliary filter.The estimated signal feedforward compensates for the actual tension fluctuation.Furthermore,a time-varying parameters fractional-order PID controller(TPFOPID)is realized to attenuate the bounded noise in the fluctuation.Finally,TPFOPID is enhanced by TFO and applied to control a tension control system considering multi-source disturbances.The stability of the method is analyzed by using the Lyapunov theorem.Finally,numerical simulations verify that the proposed scheme improves the tracking ability and robustness of the system in response to tension fluctuations.

Autotuning algorithm of particle swarm PID parameter based on D-Tent chaotic model

An improved particle swarm algorithm based on the D-Tent chaotic model is put forward aiming at the standard particle swarm algorithm. The convergence rate of the late of proposed algorithm is improved by revising the inertia weight of global optimal particles and the introduction of D-Tent chaotic sequence. Through the test of typical function and the autotuning test of proportionalintegral-derivative （PID） parameter, finally a simulation is made to the servo control system of a permanent magnet synchronous motor （PMSM） under double-loop control of rotating speed and current by utilizing the chaotic particle swarm algorithm. Studies show that the proposed algorithm can reduce the iterative times and improve the convergence rate under the condition that the global optimal solution can be got.

Research on temperature control module of injection molding machine based on C8051F020

The design of a measurement and control system of injection molding machine based on C8051F020 SCM is presented in this paper. Some resources are provided by C8051F020 such as ADC, DAC, inner temperature sensors and PWM functions. The application and achievement of the improved PID algorithm in constant temperature control of charging barrel for the injection molding machine are introduced in the paper. Given that the temperature of the charging barrel can be monitored in real-time and the corresponding temperature response curve can be acquired, the PID parameters can be adjusted conveniently and rapidly during the experiments of the temperature control.

Survey on nonlinear reconfigurable flight control

An overview on nonlinear reconfigurable flight control approaches that have been demonstrated in flight-test or highfidelity simulation is presented. Various approaches for reconfigurable flight control systems are considered, including nonlinear dynamic inversion, parameter identification and neural network technologies, backstepping and model predictive control approaches. The recent research work, flight tests, and potential strength and weakness of each approach are discussed objectively in order to give readers and researchers some reference. Finally, possible future directions and open problems in this area are addressed.

METHOD TO ELIMINATE THE INFLUENCE OF SERVO－MOTOR FRICTION TORQUEON ULTRA－LOW SPEED PERFORMANCE OFELEC

A nonlinear observer of friction torque is formulated for valve controlled servomotor system. The effect of the observer is studied with simulating method and its applied condition is analyzed. When the above observer is not suitable foe use, a simple PID controlling method with variable parameters is presented. The method has been proved to be effective by the experimental results.