Level control in flotation columns is an important factor that influences the recovery and the grade of concentrate from the column. A flotation column is a nonlinear, multi-variable problem with changeable parameters...Level control in flotation columns is an important factor that influences the recovery and the grade of concentrate from the column. A flotation column is a nonlinear, multi-variable problem with changeable parameters that traditional methods have difficulty controlling. We have applied fuzzy control methods to the flotation column and tested the performance of the design by Matlab/Simulink simulation. The simulations show that level control in the flotation column becomes smoother and more rapid with the fuzzy controller. Compared to PID control methods the overshoot in valve position, the adjustment time, and the robustness of the controller are all improved. This indicates that it is suitable to model fuzzy controllers in applications for the study of automatic control of flotation column.展开更多
Hot-box is a device used widely in the world for studying thermodynamic properties of architecture material and types of walls. It can run both static and dynamic experiments, and its demand for controlling is high. B...Hot-box is a device used widely in the world for studying thermodynamic properties of architecture material and types of walls. It can run both static and dynamic experiments, and its demand for controlling is high. Because it adopts traditional PI control presently, and is mainly used for static experiments, its dynamic response is bad. Therefore, this paper applies adaptive fuzzy control, which follows dynamic movement quite well to the hotbox device. At the same time, considering the characteristic that the stable state quality is high within little error of traditional PI control, it combines the adaptive fuzzy control with quantity factor and proportion factor serf-adjusting online and PI control to be a new double mode control using different control models at different conditions. The results of hotbox controlling experiments indicate that this control system is better than PI control or single fuzzy control both at response and precision.展开更多
This paper presents the automatic guidance system of an agricultural tractor and the side shift control of the attached row crop cultivator using electro-hydraulic actuators. In order to simulate the dynamic behaviour...This paper presents the automatic guidance system of an agricultural tractor and the side shift control of the attached row crop cultivator using electro-hydraulic actuators. In order to simulate the dynamic behaviour of the tractor along with the attached cultivator, the modified bicycle model was adopted. Steering angle sensor, fibre optic gyroscope （FOG） and RTK-DGPS technologies are assumed for measurements of the steering angle, yaw rate and the lateral position of the tractor, respectively. The kinematics model was used for the implement. In this study four cascade controllers were designed and simulated for tractor guidance which consists ofPD, PD, P and PID controllers. Other PI and PID controllers also had been designed for implement side shifting purpose. Then, these two systems were combined and the performance of the whole system was evaluated through the simulation results. According to the results tractor reaches the desired path after less than 10 seconds. Simulations showed that the maximum deviation of the tractor from the desired path was about 5 cm within this period. And the cultivator blades would follow the predetermined path with steady state error of about 5 cm too.展开更多
The quality of the micro-mechanical machining outcome depends significantly on the tracking performance of the miniaturized linear motor drive precision stage. The tracking behavior of a direct drive design is prone t...The quality of the micro-mechanical machining outcome depends significantly on the tracking performance of the miniaturized linear motor drive precision stage. The tracking behavior of a direct drive design is prone to uncertainties such as model parameter variations and disturbances. Robust optimal tracking controller design for this kind of precision stages with mass and damping ratio uncertainties was researched. The mass and damping ratio uncertainties were modeled as the structured parametric uncertainty model. An identification method for obtaining the parametric uncertainties was developed by using unbiased least square technique. The instantaneous frequency bandwidth of the external disturbance signals was analyzed by using short time Fourier transform technique. A two loop tracking control strategy that combines the p-synthesis and the disturbance observer （DOB） techniques was proposed. The p-synthesis technique was used to design robust optimal controllers based on structured uncertainty models. By complementing the/z controller, the DOB was applied to further improving the disturbance rejection performance. To evaluate the positioning performance of the proposed control strategy, the comparative experiments were conducted on a prototype micro milling machine among four control schemes： the proposed two-loop tracking control, the single loop μ control, the PID control and the PID with DOB control. The disturbance rejection performances, the root mean square （RMS） tracking errors and the performance robustness of different control schemes were studied. The results reveal that the proposed control scheme has the best positioning performance. It reduces the maximal errors caused by disturbance forces such as friction force by 60% and the RMS errors by 63.4% compared with the PID control. Compared to PID with DOB control, it reduces the RMS errors by 29.6%.展开更多
基金support from the Fundamental Research Funds for the Central Universitiesthe National Key Technology R & D Program in the 11th Five Year Plan of China (No. 2008BAB31B03)
文摘Level control in flotation columns is an important factor that influences the recovery and the grade of concentrate from the column. A flotation column is a nonlinear, multi-variable problem with changeable parameters that traditional methods have difficulty controlling. We have applied fuzzy control methods to the flotation column and tested the performance of the design by Matlab/Simulink simulation. The simulations show that level control in the flotation column becomes smoother and more rapid with the fuzzy controller. Compared to PID control methods the overshoot in valve position, the adjustment time, and the robustness of the controller are all improved. This indicates that it is suitable to model fuzzy controllers in applications for the study of automatic control of flotation column.
文摘Hot-box is a device used widely in the world for studying thermodynamic properties of architecture material and types of walls. It can run both static and dynamic experiments, and its demand for controlling is high. Because it adopts traditional PI control presently, and is mainly used for static experiments, its dynamic response is bad. Therefore, this paper applies adaptive fuzzy control, which follows dynamic movement quite well to the hotbox device. At the same time, considering the characteristic that the stable state quality is high within little error of traditional PI control, it combines the adaptive fuzzy control with quantity factor and proportion factor serf-adjusting online and PI control to be a new double mode control using different control models at different conditions. The results of hotbox controlling experiments indicate that this control system is better than PI control or single fuzzy control both at response and precision.
文摘This paper presents the automatic guidance system of an agricultural tractor and the side shift control of the attached row crop cultivator using electro-hydraulic actuators. In order to simulate the dynamic behaviour of the tractor along with the attached cultivator, the modified bicycle model was adopted. Steering angle sensor, fibre optic gyroscope （FOG） and RTK-DGPS technologies are assumed for measurements of the steering angle, yaw rate and the lateral position of the tractor, respectively. The kinematics model was used for the implement. In this study four cascade controllers were designed and simulated for tractor guidance which consists ofPD, PD, P and PID controllers. Other PI and PID controllers also had been designed for implement side shifting purpose. Then, these two systems were combined and the performance of the whole system was evaluated through the simulation results. According to the results tractor reaches the desired path after less than 10 seconds. Simulations showed that the maximum deviation of the tractor from the desired path was about 5 cm within this period. And the cultivator blades would follow the predetermined path with steady state error of about 5 cm too.
基金Project(50875257) supported by the National Natural Science Foundation of China
文摘The quality of the micro-mechanical machining outcome depends significantly on the tracking performance of the miniaturized linear motor drive precision stage. The tracking behavior of a direct drive design is prone to uncertainties such as model parameter variations and disturbances. Robust optimal tracking controller design for this kind of precision stages with mass and damping ratio uncertainties was researched. The mass and damping ratio uncertainties were modeled as the structured parametric uncertainty model. An identification method for obtaining the parametric uncertainties was developed by using unbiased least square technique. The instantaneous frequency bandwidth of the external disturbance signals was analyzed by using short time Fourier transform technique. A two loop tracking control strategy that combines the p-synthesis and the disturbance observer （DOB） techniques was proposed. The p-synthesis technique was used to design robust optimal controllers based on structured uncertainty models. By complementing the/z controller, the DOB was applied to further improving the disturbance rejection performance. To evaluate the positioning performance of the proposed control strategy, the comparative experiments were conducted on a prototype micro milling machine among four control schemes： the proposed two-loop tracking control, the single loop μ control, the PID control and the PID with DOB control. The disturbance rejection performances, the root mean square （RMS） tracking errors and the performance robustness of different control schemes were studied. The results reveal that the proposed control scheme has the best positioning performance. It reduces the maximal errors caused by disturbance forces such as friction force by 60% and the RMS errors by 63.4% compared with the PID control. Compared to PID with DOB control, it reduces the RMS errors by 29.6%.
