Aiming at the existing problems of safety, reliability and flexibility in the traditional coal mine belt transport system, this paper designed the mine centralized control system transmitted by CAN bus and PLC as the ...Aiming at the existing problems of safety, reliability and flexibility in the traditional coal mine belt transport system, this paper designed the mine centralized control system transmitted by CAN bus and PLC as the core, and use comparison instructions and trigger of Siemens S7-200 PLC, the article has elaborated the four level conveyor belt sequence control, realized the sequence start, reverse sequence stop and fault processing and other functions for four level conveyor belt, the compared with traditional timer control instructions scheme, the design has clear thinking, simple design program, and is easy to be extended to multilevel belt drive sequence control.展开更多
Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastru...Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastructure,etc.)are often invested in programming,interfacing the sensors,debugging the response to algorithms during prototyping and operational phases of a robot development cycle.The cost of developing an optimal infrastructure to efficiently address such control and monitoring requirements increases significantly in the presence of mobile robots.Though numerous solutions have been developed for minimizing the resources spent on hardware prototyping and algorithm validation in both static and mobile scenarios,it can be observed that researchers have either chosen methodologies that conflict with the power and infrastructure constraints of the research field or generated constrained solutions whose applications are restricted to the field itself.This paper develops a solution for addressing the challenges in controlling heterogeneous mobile robots.A platform named Quanta-a cost effective,energy efficient and high-speed wireless infrastructure is prototyped as a part of the research in the field of modular robotics.Quanta is capable of controlling and monitoring various events in/using a robot with the help of a light-weight communication protocol independent of the robot hardware architecture(s).展开更多
This paper designs a set of ventilation and dust removal in coal mine test device and PLC monitoring system. The ventilation and dust removal test device has a set of ventilation and dust removal functions, can automa...This paper designs a set of ventilation and dust removal in coal mine test device and PLC monitoring system. The ventilation and dust removal test device has a set of ventilation and dust removal functions, can automatically monitor air volume, air pressure, resistance and other performance parameters of ventilator and precipitator. The PLC monitoring system can remotely start and stop the variable frequency speed control on the ventilation machine and dust collector, and it can real-time monitor operation state, such as the running current and the parameters of ventilator and dust collector. The paper simulate and realize computer remote centralized monitoring of underground ventilation for mine ventilation system. The actual application shows that： the system is stable and reliable, simple operation, strong scalability.展开更多
Neutral Beam Injection control system (NBICS) is constructed to measure the plasma current, Magnet current, vacuum pressure, cryopump temperature, control water cooling, filament voltage, and power supply, etc. The NB...Neutral Beam Injection control system (NBICS) is constructed to measure the plasma current, Magnet current, vacuum pressure, cryopump temperature, control water cooling, filament voltage, and power supply, etc. The NBICS, consisting mainly of a Programmable Logic Controller (PLC) subsystem, data acquisition and processing subsystem and cryopump and vacuum pressure monitoring subsystem, has successfully been used on a NBI device. In this article, the design of NBICS on HT-7 is discussed and each subsystem is described in particular. In addition, some experimental results are reported which are very important data for further research related to the HT-7 tokamak.展开更多
Today, dosimeters are used generally for dosimetry of the diagnostic X-ray beam. Ionization chambers are appropriate instruments for monitoring and also the dosimetry of X-ray beam in medical diagnostic equipment. The...Today, dosimeters are used generally for dosimetry of the diagnostic X-ray beam. Ionization chambers are appropriate instruments for monitoring and also the dosimetry of X-ray beam in medical diagnostic equipment. The present work introduces design and investigation of a new ring-shaped monitor chamber with a PMMA body, graphite-coated PMMA windows (0.5 mm thick), a special graphite-foil central electrode (0.1 mm thick, 0.7 g/cm3 dense) that creating two sensitive volumes and a central hole for crossing the radiation beam with less attenuation. The results of performance tests conducted at the Nuclear Science and Technology Research Institute, AEOI in Karaj- Iran proved the high short and long-term stability, the very low leakage current, the low directional dependence and very high ion collection efficiency through the special design of the collecting electrode. Moreover, the FLUKA Monte Carlo simulations certified the negligible effect of central electrode on this new ring-shaped monitor chamber. According to the results of the performance tests, the new monitor chamber can be used as a standard dosimeter in order to monitor X-ray beam in primary standard dosimetry laboratories.展开更多
文摘Aiming at the existing problems of safety, reliability and flexibility in the traditional coal mine belt transport system, this paper designed the mine centralized control system transmitted by CAN bus and PLC as the core, and use comparison instructions and trigger of Siemens S7-200 PLC, the article has elaborated the four level conveyor belt sequence control, realized the sequence start, reverse sequence stop and fault processing and other functions for four level conveyor belt, the compared with traditional timer control instructions scheme, the design has clear thinking, simple design program, and is easy to be extended to multilevel belt drive sequence control.
文摘Rapid prototyping,real-time control and monitoring of various events in robots are crucial requirements for research in the fields of modular and swarm robotics.A large quantities of resources(time,man power,infrastructure,etc.)are often invested in programming,interfacing the sensors,debugging the response to algorithms during prototyping and operational phases of a robot development cycle.The cost of developing an optimal infrastructure to efficiently address such control and monitoring requirements increases significantly in the presence of mobile robots.Though numerous solutions have been developed for minimizing the resources spent on hardware prototyping and algorithm validation in both static and mobile scenarios,it can be observed that researchers have either chosen methodologies that conflict with the power and infrastructure constraints of the research field or generated constrained solutions whose applications are restricted to the field itself.This paper develops a solution for addressing the challenges in controlling heterogeneous mobile robots.A platform named Quanta-a cost effective,energy efficient and high-speed wireless infrastructure is prototyped as a part of the research in the field of modular robotics.Quanta is capable of controlling and monitoring various events in/using a robot with the help of a light-weight communication protocol independent of the robot hardware architecture(s).
文摘This paper designs a set of ventilation and dust removal in coal mine test device and PLC monitoring system. The ventilation and dust removal test device has a set of ventilation and dust removal functions, can automatically monitor air volume, air pressure, resistance and other performance parameters of ventilator and precipitator. The PLC monitoring system can remotely start and stop the variable frequency speed control on the ventilation machine and dust collector, and it can real-time monitor operation state, such as the running current and the parameters of ventilator and dust collector. The paper simulate and realize computer remote centralized monitoring of underground ventilation for mine ventilation system. The actual application shows that： the system is stable and reliable, simple operation, strong scalability.
基金The project supported by the Meg-science Engineering Project of the Chinese Academy of Sciences
文摘Neutral Beam Injection control system (NBICS) is constructed to measure the plasma current, Magnet current, vacuum pressure, cryopump temperature, control water cooling, filament voltage, and power supply, etc. The NBICS, consisting mainly of a Programmable Logic Controller (PLC) subsystem, data acquisition and processing subsystem and cryopump and vacuum pressure monitoring subsystem, has successfully been used on a NBI device. In this article, the design of NBICS on HT-7 is discussed and each subsystem is described in particular. In addition, some experimental results are reported which are very important data for further research related to the HT-7 tokamak.
文摘Today, dosimeters are used generally for dosimetry of the diagnostic X-ray beam. Ionization chambers are appropriate instruments for monitoring and also the dosimetry of X-ray beam in medical diagnostic equipment. The present work introduces design and investigation of a new ring-shaped monitor chamber with a PMMA body, graphite-coated PMMA windows (0.5 mm thick), a special graphite-foil central electrode (0.1 mm thick, 0.7 g/cm3 dense) that creating two sensitive volumes and a central hole for crossing the radiation beam with less attenuation. The results of performance tests conducted at the Nuclear Science and Technology Research Institute, AEOI in Karaj- Iran proved the high short and long-term stability, the very low leakage current, the low directional dependence and very high ion collection efficiency through the special design of the collecting electrode. Moreover, the FLUKA Monte Carlo simulations certified the negligible effect of central electrode on this new ring-shaped monitor chamber. According to the results of the performance tests, the new monitor chamber can be used as a standard dosimeter in order to monitor X-ray beam in primary standard dosimetry laboratories.
