A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection co...A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.展开更多
The principle of rotor flux-orientation vector control on 100/150 kW three-phase AC induction motor for electric drive tracked vehicles is analyzed, and the mathematic model is deduced. The drive system of induction m...The principle of rotor flux-orientation vector control on 100/150 kW three-phase AC induction motor for electric drive tracked vehicles is analyzed, and the mathematic model is deduced. The drive system of induction motor is modeled and simulated by Matlab/Simulink. The characteristics of motor and drive system are analyzed and evaluated by practical bench test. The simulation and bench test results show that the model is valid, and the driving control system has constant torque under rated speed, constant torque above rated speed, widely variable speed range and better dynamic characteristics. In order to evaluate the practical applications of high power induction motor driving system in electric drive tracked vehicles, a collaborative simulation based on interface technology of Matlab/Simulink and multi-body dynamic analysis software known as RecurDyn is done, the vehicle performances are predicted in the acceleration time (0-32 km/h) and turning characteristic (v=10 km/h, R=B).展开更多
基金the Ministerial Level Advanced Research Foundation (404050301 .4)
文摘A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.
基金Sponsored by Ordnance Science and Technology Pre-research Project of China(40402070101)
文摘The principle of rotor flux-orientation vector control on 100/150 kW three-phase AC induction motor for electric drive tracked vehicles is analyzed, and the mathematic model is deduced. The drive system of induction motor is modeled and simulated by Matlab/Simulink. The characteristics of motor and drive system are analyzed and evaluated by practical bench test. The simulation and bench test results show that the model is valid, and the driving control system has constant torque under rated speed, constant torque above rated speed, widely variable speed range and better dynamic characteristics. In order to evaluate the practical applications of high power induction motor driving system in electric drive tracked vehicles, a collaborative simulation based on interface technology of Matlab/Simulink and multi-body dynamic analysis software known as RecurDyn is done, the vehicle performances are predicted in the acceleration time (0-32 km/h) and turning characteristic (v=10 km/h, R=B).
