A coupled Navier-Stokes/free-wake method is developed to predict the rotor aerodynamics and wake.The widely-used Farassat 1 Aformulation is adopted to predict the rotor noise.In the coupled method,the Reynolds-average...A coupled Navier-Stokes/free-wake method is developed to predict the rotor aerodynamics and wake.The widely-used Farassat 1 Aformulation is adopted to predict the rotor noise.In the coupled method,the Reynolds-averaged Navier-Stokes(RANS)solver is established to simulate complex aerodynamic phenomena around blade and the tip-wake is captured by a free-wake model without numerical dissipation in the off-body wake zone.To overcome the time-consuming of the coupling strategy in previous studies,a more efficient coupling strategy is presented,by which only the induced velocity on the outer boundary grid need to be calculated.In order to obtain blade control settings,a delta trimming procedure is developed,which is more efficient than traditional trim method in the calculation of Jacobian matrix.Several flight conditions are simulated to demonstrate the validity of the coupled method.Then the rotor noise of operational load survey(OLS)is studied by the developed method as an application and the computational results are shown to be in good agreements with the available experimental data.展开更多
A regional ocean atmosphere coupled model (ROAM) is developed through coupler OASIS3,and is composed of regional climate model RegCM3 and CREM (Climate version of Regional Eta Model) as its atmospheric component and o...A regional ocean atmosphere coupled model (ROAM) is developed through coupler OASIS3,and is composed of regional climate model RegCM3 and CREM (Climate version of Regional Eta Model) as its atmospheric component and of a revised Princeton ocean model (POM2000) as its oceanic component.The performance of the ROAM over the western North Pacific summer monsoon region is assessed by the case simulation of warm season in 1998.Impacts of different atmospheric model components on the performance of ROAM are investigated.Compared with stand-alone simulation,CREM (RegCM3) produces more (or less) rainfall over ocean area with inclusion of the air-sea coupling.Different biases of rainfall are caused by the different biases of SST derived from the coupled simulation.Warm (or cold) SST bias simulated by CREM_CPL (RegCM3_CPL) increases (or decreases) the evaporation at sea surface,then increases (or decreases) the rainfall over ocean.The analyses suggest that the biases of vertical profile of temperature and specific humidity in stand-alone simulations may be responsible for the SST biases in regional coupled simulations.Compared with reanalysis data,the warmer (or colder) and moister (or dryer) lower troposphere simulated in CREM (RegCM3) produces less (or more) sea surface latent heat flux.Meanwhile,the more unstable (or stable) lower troposphere produces less (or more) cloudiness at low-level,which increases (or decreases) the solar radiation reaching on the sea surface.CREM (RegCM3) forced by observed SST overestimates (or underestimates) the sea surface net heat flux,implying a potential warm (or cold) heat source.After coupling with POM2000,the warm (or cold) heat source would further increase (or decrease) the SST.The biases of vertical profile of temperature and specific humidity may be ascribed to the different representation of cumulus convection in atmospheric models.展开更多
A new conjugated hyperbranched polymer （hb-TFO） containing tetraphenylethylene （TPE） units, a famous aggregation-induced emission （AIE） active group, as the core, was synthesized successfully with modest yield v...A new conjugated hyperbranched polymer （hb-TFO） containing tetraphenylethylene （TPE） units, a famous aggregation-induced emission （AIE） active group, as the core, was synthesized successfully with modest yield via one-pot Suzuki polymerization reaction. Thanks to the introduction of TPE moieties, hb-TFO exhibited aggregation-enhanced emission （AEE） property, and could work as explosive chemosensor with high sensitivity. The polymeric light-emitting diode （PLED） device was fabricated to investigate its electroluminescent property, and hb-TFO demonstrated a maximum luminance efficiency of 0.22 cd/A and a maximum brightness of 545 cd/m2 at 15.9 V.展开更多
In this paper, parallel library, portable extensible toolkit for scientific computation (PETSc), is used to solve linear systems in soil-water coupled finite element method (FEM) for geotechnical problems. The paralle...In this paper, parallel library, portable extensible toolkit for scientific computation (PETSc), is used to solve linear systems in soil-water coupled finite element method (FEM) for geotechnical problems. The parallel environment is integrated into GLEAVES, which is a geotechnical software package used for the finite element simulation. The linear system Ax = b which is a fundamental and the most time-consuming part of the FEM is solved with iterative solvers in PETSc. In order to find a robust and effective combination of iterative solvers and corresponding preconditioners for the soil-water coupled problems, performance evaluations on Krylov subspace methods and four preconditioners are carried out. The results indicate that general minimal residual (GMRES) method coupled with preconditioners can provide an effective solution. The application to a construction project is presented to illustrate the potential of the proposed solution.展开更多
文摘A coupled Navier-Stokes/free-wake method is developed to predict the rotor aerodynamics and wake.The widely-used Farassat 1 Aformulation is adopted to predict the rotor noise.In the coupled method,the Reynolds-averaged Navier-Stokes(RANS)solver is established to simulate complex aerodynamic phenomena around blade and the tip-wake is captured by a free-wake model without numerical dissipation in the off-body wake zone.To overcome the time-consuming of the coupling strategy in previous studies,a more efficient coupling strategy is presented,by which only the induced velocity on the outer boundary grid need to be calculated.In order to obtain blade control settings,a delta trimming procedure is developed,which is more efficient than traditional trim method in the calculation of Jacobian matrix.Several flight conditions are simulated to demonstrate the validity of the coupled method.Then the rotor noise of operational load survey(OLS)is studied by the developed method as an application and the computational results are shown to be in good agreements with the available experimental data.
基金supported by the Ocean Projects of Public Science and Technology Research Funds (Grant No. 201105019-3)
文摘A regional ocean atmosphere coupled model (ROAM) is developed through coupler OASIS3,and is composed of regional climate model RegCM3 and CREM (Climate version of Regional Eta Model) as its atmospheric component and of a revised Princeton ocean model (POM2000) as its oceanic component.The performance of the ROAM over the western North Pacific summer monsoon region is assessed by the case simulation of warm season in 1998.Impacts of different atmospheric model components on the performance of ROAM are investigated.Compared with stand-alone simulation,CREM (RegCM3) produces more (or less) rainfall over ocean area with inclusion of the air-sea coupling.Different biases of rainfall are caused by the different biases of SST derived from the coupled simulation.Warm (or cold) SST bias simulated by CREM_CPL (RegCM3_CPL) increases (or decreases) the evaporation at sea surface,then increases (or decreases) the rainfall over ocean.The analyses suggest that the biases of vertical profile of temperature and specific humidity in stand-alone simulations may be responsible for the SST biases in regional coupled simulations.Compared with reanalysis data,the warmer (or colder) and moister (or dryer) lower troposphere simulated in CREM (RegCM3) produces less (or more) sea surface latent heat flux.Meanwhile,the more unstable (or stable) lower troposphere produces less (or more) cloudiness at low-level,which increases (or decreases) the solar radiation reaching on the sea surface.CREM (RegCM3) forced by observed SST overestimates (or underestimates) the sea surface net heat flux,implying a potential warm (or cold) heat source.After coupling with POM2000,the warm (or cold) heat source would further increase (or decrease) the SST.The biases of vertical profile of temperature and specific humidity may be ascribed to the different representation of cumulus convection in atmospheric models.
文摘A new conjugated hyperbranched polymer （hb-TFO） containing tetraphenylethylene （TPE） units, a famous aggregation-induced emission （AIE） active group, as the core, was synthesized successfully with modest yield via one-pot Suzuki polymerization reaction. Thanks to the introduction of TPE moieties, hb-TFO exhibited aggregation-enhanced emission （AEE） property, and could work as explosive chemosensor with high sensitivity. The polymeric light-emitting diode （PLED） device was fabricated to investigate its electroluminescent property, and hb-TFO demonstrated a maximum luminance efficiency of 0.22 cd/A and a maximum brightness of 545 cd/m2 at 15.9 V.
基金the National Natural Science Foundation of China(Nos.41172251 and 41002097)
文摘In this paper, parallel library, portable extensible toolkit for scientific computation (PETSc), is used to solve linear systems in soil-water coupled finite element method (FEM) for geotechnical problems. The parallel environment is integrated into GLEAVES, which is a geotechnical software package used for the finite element simulation. The linear system Ax = b which is a fundamental and the most time-consuming part of the FEM is solved with iterative solvers in PETSc. In order to find a robust and effective combination of iterative solvers and corresponding preconditioners for the soil-water coupled problems, performance evaluations on Krylov subspace methods and four preconditioners are carried out. The results indicate that general minimal residual (GMRES) method coupled with preconditioners can provide an effective solution. The application to a construction project is presented to illustrate the potential of the proposed solution.
