Control Strategies for PM Synchronous Machine Controlled Rectifier Intended for Heavy-Duty Vehicle

In order to charge batteries and supply all the electrical devices like wheel-motors used in a heavy-duty hybrid electric vehicle, a solution consists in using an assembly permanent magnet generator driven by a diesel engine and a three-phase insulated gate bipolar transistor/diodes bridge controlled rectifier connected to the battery. In this work, hysteresis current control strategies combined with a judicious current sensing mode for the assembly permanent magnet synchronous machine-controlled rectifier are investigated. Main issues first concern the different kinds of transistors switching modes allowed by the proposed current sensing mode when the machine operates either as a generator or as a motor. Second, the modulated hysteresis method is presented, which merges the performances of robustness and dynamic of the classical hysteresis method and imposes the switching frequency alike pulsewidth modulation techniques. A test bench at reduced power permits to test the switching modes as well as classical and modulated hysteresis methods for both motor and generator operating modes and to validate the simulation predictions. The digital signal processor algorithm elaborated for the control strategy is flexible and adaptable to all kinds of transistor switchings and machine operating modes.

Inductances Estimation in the d-q Axis for an Interior Permanent-Magnet Synchronous Machines with Distributed Windings

The inductances in d-q axis have an important influence on the behavior of PMSM （PM （permanent-magnet） synchronous machines）. Their calculation is fundamental not only to evaluate the performance such as torque and field weakening capability but also to design the control system to maximize performance and power factor. This paper presents a study of inductance in the d-q axis for buried （i.e., IPMSM （interior） PM Synchronous Machines）. This study is achieved using 2-D （two-dimensional） FEM （finite-element method） and Park＇s transformation.

Prepartition: Load Balancing Approach for Virtual Machine Reservations in a Cloud Data Center

Load balancing is vital for the efficient and long-term operation of cloud data centers.With virtualization,post(reactive)migration of virtual machines(VMs)after allocation is the traditional way for load balancing and consolidation.However,it is not easy for reactive migration to obtain predefined load balance objectives and it may interrupt services and bring instability.Therefore,we provide a new approach,called Prepartition,for load balancing.It partitions a VM request into a few sub-requests sequentially with start time,end time and capacity demands,and treats each sub-request as a regular VM request.In this way,it can proactively set a bound for each VM request on each physical machine and makes the scheduler get ready before VM migration to obtain the predefined load balancing goal,which supports the resource allocation in a fine-grained manner.Simulations with real-world trace and synthetic data show that our proposed approach with offline version(PrepartitionOff)scheduling has 10%–20%better performance than the existing load balancing baselines under several metrics,including average utilization,imbalance degree,makespan and Capacity_makespan.We also extend Prepartition to online load balancing.Evaluation results show that our proposed approach also outperforms state-of-the-art online algorithms.

Overview of Advanced Control Strategies for Electric Machines

Control strategies play a key role for operation of electric machines,which would directly affect the whole system performance.In fact,different control strategies have been executed and explored for electric machines,which bring great impacts to industrial development and human society.This paper investigates and discusses the advantages control strategies for electric machines,including the field oriented control(FOC),direct torque control(DTC),finite control set model predictive control(FCS-MPC),sensorless control,and fault tolerant control(FTC).The corresponding control principles,control targets,fundamental approaches,advanced approaches,methodologies,merits and shortcomings are revealed and analyzed in detail.

Design and Analysis of an Outer-Rotor Parallel-Hybrid-Excited Vernier Machine

In this paper,an outer-rotor parallel-hybrid-excited vernier machine is proposed.In order to realize the parallel hybrid excitation,the homopolar configuration is adopted to artfully combine the permanent magnet(PM)flux path and the electromagnet flux path together.Firstly,the structure of the proposed machine is presented.Secondly,its operating principle is studied and discussed.Thirdly,its performance for flux regulation is analyzed based on the 3-D finite element analysis.Finally,the prototype of the proposed machine is manufactured and tested to verify the analytical results.

Optimization design of an interior permanent-magnet synchronous machine for a hybrid hydraulic excavator

A hybrid power transmission system （HPTS） is a promising way to save energy in a hydraulic excavator and the electric machine is one of the key components of the system. In this paper, a design process for permanent-magnet synchronous machines （PMSMs） in a hybrid hydraulic excavator （HHE） is presented based on the analysis of the working conditions and requirements of an HHE. A parameterized design approach, which combines the analytical model and the 2D finite element method （FEM）, is applied to the electric machine to improve the design efficiency and accuracy. The analytical model is employed to optimize the electric machine efficiency and obtain the statordimension and flux density distribution. The rotor is designed with the FEM to satisfy the flux requirements obtained in stator design. The rotor configuration of the PMSM employs an interior magnet structure, thus resulting in some inverse saliency, which allows for much higher values in magnetic flux density. To reduce the rotor leakage, a disconnected type silicon steel block structure is adopted. To improve the air gap flux density distribution, the trapezoid permanent magnet （PM） and centrifugal rotor structure are applied to PMSM. Demagnetization and armature reactions are also taken into consideration and calculated by the FEM. A prototype of the newly designed electric machine has been fabri- cated and tested on the experimental platform. The analytical design results are validated by measurements.