Coated-PMMA microspheres consisting of poly （methyl methacrylate）（PMMA） core and barium titanate （BaTiO3） shell were synthesized by the modified sol-gel processing and then adopted as an electrorheological （ER...Coated-PMMA microspheres consisting of poly （methyl methacrylate）（PMMA） core and barium titanate （BaTiO3） shell were synthesized by the modified sol-gel processing and then adopted as an electrorheological （ER） materials. The structure and morphology of coated powders were chyfecterized by SEM and FT-IR; the shear stress of the suspensions of coated-PMMA particles and pure PMMA particles in silicone oil with a 20 vol% were investigated. The results show that the BaTiO3 coated PMMA microspheres based suspension in silicone oil exhibited typical ER behavior and stronger ER effects.展开更多
The anti-bacterial adhesion properties of TiO2-coated polymethyl methacrylate （PMMA） surfaces are investigated systematically. In detail, the adhesion of S. aureus （gram positive） and E. coli （gram negative） to ...The anti-bacterial adhesion properties of TiO2-coated polymethyl methacrylate （PMMA） surfaces are investigated systematically. In detail, the adhesion of S. aureus （gram positive） and E. coli （gram negative） to TiO2-coated and uncoated PMMA surfaces are performed by the plate counting method. Afterwards, the adhesion free energy of bacteria on both supporting materials is quantified using the thermodynamic approach of Lifshitz van der Waals and acid/base interactions. The superior anti-adhesion capability of TiO2-coated PMMA is demonstrated when compared to native PMMA, both experimentally and theoretically.展开更多
A new silica antireflective coating with improved hydrophobicity and optical stability in a vacuum is obtained by a two-step route. Firstly, silica sols are prepared with a sol-gel process, in which tetraethyl orthosi...A new silica antireflective coating with improved hydrophobicity and optical stability in a vacuum is obtained by a two-step route. Firstly, silica sols are prepared with a sol-gel process, in which tetraethyl orthosilicate is utilized as a precursor. And by introduction of fluorine containing glycol into the sols, the porosity of silica particles and surface polarity of the coatings are decreased. Afterward, coatings are constructed with low surface roughness by modification of PMBA-PMMA. The coatings retain transmission of up to 99.6%, and laser damage threshold of about 50 J/cm^2 at a wavelenth of 532 nm （1-on-1. 10 ns）展开更多
基金Funded by the National Natural Science Foundation of China (Nos. 10418014 and 10474074).
文摘Coated-PMMA microspheres consisting of poly （methyl methacrylate）（PMMA） core and barium titanate （BaTiO3） shell were synthesized by the modified sol-gel processing and then adopted as an electrorheological （ER） materials. The structure and morphology of coated powders were chyfecterized by SEM and FT-IR; the shear stress of the suspensions of coated-PMMA particles and pure PMMA particles in silicone oil with a 20 vol% were investigated. The results show that the BaTiO3 coated PMMA microspheres based suspension in silicone oil exhibited typical ER behavior and stronger ER effects.
基金Supported by the Program for Changjiang Scholars and Innovative Research Team in University (PCSIR0818)Health Ministry Foundation of China (WKJ2005-2-003)Natural Science Foundation of Fujian Province (2008H0089 and 2009J01025)
文摘The anti-bacterial adhesion properties of TiO2-coated polymethyl methacrylate （PMMA） surfaces are investigated systematically. In detail, the adhesion of S. aureus （gram positive） and E. coli （gram negative） to TiO2-coated and uncoated PMMA surfaces are performed by the plate counting method. Afterwards, the adhesion free energy of bacteria on both supporting materials is quantified using the thermodynamic approach of Lifshitz van der Waals and acid/base interactions. The superior anti-adhesion capability of TiO2-coated PMMA is demonstrated when compared to native PMMA, both experimentally and theoretically.
基金supported by the National Major Project of Science and Technology under Grant No.2013ZX04006011-101
文摘A new silica antireflective coating with improved hydrophobicity and optical stability in a vacuum is obtained by a two-step route. Firstly, silica sols are prepared with a sol-gel process, in which tetraethyl orthosilicate is utilized as a precursor. And by introduction of fluorine containing glycol into the sols, the porosity of silica particles and surface polarity of the coatings are decreased. Afterward, coatings are constructed with low surface roughness by modification of PMBA-PMMA. The coatings retain transmission of up to 99.6%, and laser damage threshold of about 50 J/cm^2 at a wavelenth of 532 nm （1-on-1. 10 ns）
