The state of in situ stress is a crucial parameter in subsurface engineering,especially for critical projects like nuclear waste repository.As one of the two ISRM suggested methods,the overcoring(OC)method is widely u...The state of in situ stress is a crucial parameter in subsurface engineering,especially for critical projects like nuclear waste repository.As one of the two ISRM suggested methods,the overcoring(OC)method is widely used to estimate the full stress tensors in rocks by independent regression analysis of the data from each OC test.However,such customary independent analysis of individual OC tests,known as no pooling,is liable to yield unreliable test-specific stress estimates due to various uncertainty sources involved in the OC method.To address this problem,a practical and no-cost solution is considered by incorporating into OC data analysis additional information implied within adjacent OC tests,which are usually available in OC measurement campaigns.Hence,this paper presents a Bayesian partial pooling(hierarchical)model for combined analysis of adjacent OC tests.We performed five case studies using OC test data made at a nuclear waste repository research site of Sweden.The results demonstrate that partial pooling of adjacent OC tests indeed allows borrowing of information across adjacent tests,and yields improved stress tensor estimates with reduced uncertainties simultaneously for all individual tests than they are independently analysed as no pooling,particularly for those unreliable no pooling stress estimates.A further model comparison shows that the partial pooling model also gives better predictive performance,and thus confirms that the information borrowed across adjacent OC tests is relevant and effective.展开更多
In order to enhance the performance of the CNN-based segmentation models for bone metastases, this study proposes a segmentation method that integrates dual-pooling, DAC, and RMP modules. The network consists of disti...In order to enhance the performance of the CNN-based segmentation models for bone metastases, this study proposes a segmentation method that integrates dual-pooling, DAC, and RMP modules. The network consists of distinct feature encoding and decoding stages, with dual-pooling modules employed in encoding stages to maintain the background information needed for bone scintigrams diagnosis. Both the DAC and RMP modules are utilized in the bottleneck layer to address the multi-scale problem of metastatic lesions. Experimental evaluations on 306 clinical SPECT data have demonstrated that the proposed method showcases a substantial improvement in both DSC and Recall scores by 3.28% and 6.55% compared the baseline. Exhaustive case studies illustrate the superiority of the methodology.展开更多
We use the phase field method to track the gas-liquid interface based on the gas-liquid two-phase flow in the pool boiling process,and study the bubble nucleation,growth,deformation,departure and other dynamic behavio...We use the phase field method to track the gas-liquid interface based on the gas-liquid two-phase flow in the pool boiling process,and study the bubble nucleation,growth,deformation,departure and other dynamic behaviors on the heating surface under microgravity.By simulating the correlation between liquid undercooling and bubble dynamics,we find that the bubble growth time increases with the increase of liquid undercooling,but the effect of liquid undercooling on bubble height is not significant.Meanwhile,the gas-liquid-solid three-phase contact angle and the gravity level will also have an effect on the bubble growth time and bubble height.With the increase of the contact angle,the bubble growth time and bubble height when the bubble departs also increase.While the effect of gravity level is on the contrary,the smaller the gravity level is,the larger the bubble height and bubble growth time when the bubble separates.展开更多
As a dynamic ex situ conservation strategy,a clonal seed orchard was started in a nursery in Pomaio(POM)in central Italy in 1993 for an assisted migration experiment of Abies nebrodensis(Lojac.)Mattei.Two artifi cial ...As a dynamic ex situ conservation strategy,a clonal seed orchard was started in a nursery in Pomaio(POM)in central Italy in 1993 for an assisted migration experiment of Abies nebrodensis(Lojac.)Mattei.Two artifi cial ex situ populations were planted with this gene pool:a seedling arboretum in Pieve Santo Stefano(PSS)and a small dendrological collection in Papiano(PAP),both originating from the Sicilian relict population.Here,using AFLP markers,we estimated the relatedness among the relocated genotypes of the three collections to check whether the three collections had suffi cient genetic variability to be considered as additional sources of variability to the original gene pool for the assisted migration strategy.High individual genetic variability was found in the collections;each plant had a diff erent genotype and was confi rmed to belong to its population of origin.PAP and PSS trees were shown to be only from the original population of A.nebrodensis species and were derived from a limited set of maternal fertile genotypes.Based on the Sicilian fi r population inventory,nursery production in Sicily,and structure clustering analysis,close genetic relationships among POM,PAP and several PSS trees(1–35)were evident.Similarly,the PSS group(36–78)was genetically close to tree 1 of POM and in a lesser proportion to plants 7 and 9 of POM.The sampling of seedlings used to form batches in the nursery might have infl uenced the structure of the resultant plantations.All genotypes will be useful for enriching the original gene pool.展开更多
Background: Tuberculosis (TB) diagnostics, such as Xpert MTB/RIF, is still limited by cost. Testing of pooled samples from presumptive TB patients has been thought as a cost-saving strategy to diagnose TB. We assessed...Background: Tuberculosis (TB) diagnostics, such as Xpert MTB/RIF, is still limited by cost. Testing of pooled samples from presumptive TB patients has been thought as a cost-saving strategy to diagnose TB. We assessed the utility and cost-saving of pooled Xpert MTB/RIF testing strategy for the diagnosis of TB in Mwanza, Tanzania. Methods: Sputum samples from Presumptive TB patients were submitted to TB laboratory for routine diagnosis of TB using Xpert MTB/RIF. The TB results from the individual sputum samples were used as the reference standard and were concealed to the investigating laboratory technicians. The remainder of samples were collected serially and were pooled (5 samples per pool) for testing. The agreement of the results between individual sample testing against pooled sample testing and cost-savings was assessed. Results: A total of 250 sputum samples from presumptive TB patients were analyzed and 50 pools were made with each pool containing 5 samples. Of the 50 sputum pools made, Mycobacterium tuberculosis (MTB) was detected in 17 (34.0%) pools. Results from the individual sputum samples MTB/RIF testing were retrieved for all 250 samples and there were 28 (11.2%) samples in which MTB was detected whereas 222 (88.8%) samples had no MTB detected. Following re-analysis of positive pools, all 28 (100%) individual positive MTB samples were detected within the 17 positive pools, with 1 to 3 individual MTB positive samples per pool. The individual sputum samples were correctly identified by pooled sputum on Xpert MTB/RIF testing, with the sensitivity of 100% and specificity of 100%. Using pooling of sputum samples strategy, we saved 46.0% (115/250) of the cartridges. Conclusion: The pooled sputum testing strategy reduced cartridge costs by 46.0% and has the potential to increase the affordability of Xpert MTB/RIF testing in countries with limited resources, such as Tanzania.展开更多
Various enhanced surfaces have been proposed over the years to improve boiling heat transfer. This paper introduces an experimental setup designed for boiling demonstration in the graduate-level Heat Transfer course. ...Various enhanced surfaces have been proposed over the years to improve boiling heat transfer. This paper introduces an experimental setup designed for boiling demonstration in the graduate-level Heat Transfer course. The pool boiling performance of water under atmospheric pressure of 1.025 bar is investigated by using several structured surfaces at heat fluxes of 28 and 35 kW/m<sup>2</sup>. Surfaces with holes, rectangular grooves, and mushroom fins are manufactured by an NC-controlled vertical milling machine. The heat flux versus excess temperature graph is plotted by using thermocouple measurements of water and base temperatures of the boiling vessel. The separation, rise, and growth of individual vapor bubbles from the surface during boiling were recorded with a digital camera. The results for the plain surface are compared to the Rohsenow correlation. The enhancement of heat transfer coefficient (h) ranged between 15% - 44.5% for all structured surfaces. The highest heat transfer coefficient enhancement is observed between 41% - 56.5% for holed surface-3 (405 holes) compared to the plain surface. The excess temperature dropped around 29% - 34% for holed surface-3 (405 holes) compared to the plain surface. The heat transfer coefficient increases as the spacing between channels or holes decreases. While the bubbles on holed and mushroomed surfaces were spherical, the bubbles on the flat and grooved surfaces were observed as formless. The suggested economical test design could be appropriate to keep students focused and participating in the classroom.展开更多
Mineralisable soil organic carbon(SOC)pools vary with ecosystem type in response to changes in climate,vegetation and soil properties.Understanding the effect of climate and soil factors on SOC pools is critical for p...Mineralisable soil organic carbon(SOC)pools vary with ecosystem type in response to changes in climate,vegetation and soil properties.Understanding the effect of climate and soil factors on SOC pools is critical for predicting change over time.Surface soil samples from six ecoregions of the United States were analyzed for permanganate oxidizable C(KMnO4-C)and mineralizable C pools.Variations of SOC ranged from 7.9 mg g^-1(Florida site)to 325 mg g^-1(Hawaii site).Mineralisable C pools and KMnO4-C were highest in soils from the Hawaii site.Mean annual precipitation explains SOC and resistant C pool variations.Clay content was related to mineralisable active C pools and bacterial abundance.Mean annual precipitation and clay content are potential variables for predicting changes in SOC pools at large spatial scales.展开更多
基金supported by the Guangdong Basic and Applied Basic Research Foundation(2023A1515011244).
文摘The state of in situ stress is a crucial parameter in subsurface engineering,especially for critical projects like nuclear waste repository.As one of the two ISRM suggested methods,the overcoring(OC)method is widely used to estimate the full stress tensors in rocks by independent regression analysis of the data from each OC test.However,such customary independent analysis of individual OC tests,known as no pooling,is liable to yield unreliable test-specific stress estimates due to various uncertainty sources involved in the OC method.To address this problem,a practical and no-cost solution is considered by incorporating into OC data analysis additional information implied within adjacent OC tests,which are usually available in OC measurement campaigns.Hence,this paper presents a Bayesian partial pooling(hierarchical)model for combined analysis of adjacent OC tests.We performed five case studies using OC test data made at a nuclear waste repository research site of Sweden.The results demonstrate that partial pooling of adjacent OC tests indeed allows borrowing of information across adjacent tests,and yields improved stress tensor estimates with reduced uncertainties simultaneously for all individual tests than they are independently analysed as no pooling,particularly for those unreliable no pooling stress estimates.A further model comparison shows that the partial pooling model also gives better predictive performance,and thus confirms that the information borrowed across adjacent OC tests is relevant and effective.
文摘In order to enhance the performance of the CNN-based segmentation models for bone metastases, this study proposes a segmentation method that integrates dual-pooling, DAC, and RMP modules. The network consists of distinct feature encoding and decoding stages, with dual-pooling modules employed in encoding stages to maintain the background information needed for bone scintigrams diagnosis. Both the DAC and RMP modules are utilized in the bottleneck layer to address the multi-scale problem of metastatic lesions. Experimental evaluations on 306 clinical SPECT data have demonstrated that the proposed method showcases a substantial improvement in both DSC and Recall scores by 3.28% and 6.55% compared the baseline. Exhaustive case studies illustrate the superiority of the methodology.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.52161002,51661020,and11364024)the Postdoctoral Science Foundation of China(Grant No.2014M560371)the Funds for Distinguished Young Scientists of Lanzhou University of Technology of China(Grant No.J201304)。
文摘We use the phase field method to track the gas-liquid interface based on the gas-liquid two-phase flow in the pool boiling process,and study the bubble nucleation,growth,deformation,departure and other dynamic behaviors on the heating surface under microgravity.By simulating the correlation between liquid undercooling and bubble dynamics,we find that the bubble growth time increases with the increase of liquid undercooling,but the effect of liquid undercooling on bubble height is not significant.Meanwhile,the gas-liquid-solid three-phase contact angle and the gravity level will also have an effect on the bubble growth time and bubble height.With the increase of the contact angle,the bubble growth time and bubble height when the bubble departs also increase.While the effect of gravity level is on the contrary,the smaller the gravity level is,the larger the bubble height and bubble growth time when the bubble separates.
基金funded by the Italian Ministry for Agriculture,Food and Forestry Policies in the framework of the“FAO-RGV(FAO-Vegetal Genetic Resources)Project”.
文摘As a dynamic ex situ conservation strategy,a clonal seed orchard was started in a nursery in Pomaio(POM)in central Italy in 1993 for an assisted migration experiment of Abies nebrodensis(Lojac.)Mattei.Two artifi cial ex situ populations were planted with this gene pool:a seedling arboretum in Pieve Santo Stefano(PSS)and a small dendrological collection in Papiano(PAP),both originating from the Sicilian relict population.Here,using AFLP markers,we estimated the relatedness among the relocated genotypes of the three collections to check whether the three collections had suffi cient genetic variability to be considered as additional sources of variability to the original gene pool for the assisted migration strategy.High individual genetic variability was found in the collections;each plant had a diff erent genotype and was confi rmed to belong to its population of origin.PAP and PSS trees were shown to be only from the original population of A.nebrodensis species and were derived from a limited set of maternal fertile genotypes.Based on the Sicilian fi r population inventory,nursery production in Sicily,and structure clustering analysis,close genetic relationships among POM,PAP and several PSS trees(1–35)were evident.Similarly,the PSS group(36–78)was genetically close to tree 1 of POM and in a lesser proportion to plants 7 and 9 of POM.The sampling of seedlings used to form batches in the nursery might have infl uenced the structure of the resultant plantations.All genotypes will be useful for enriching the original gene pool.
文摘Background: Tuberculosis (TB) diagnostics, such as Xpert MTB/RIF, is still limited by cost. Testing of pooled samples from presumptive TB patients has been thought as a cost-saving strategy to diagnose TB. We assessed the utility and cost-saving of pooled Xpert MTB/RIF testing strategy for the diagnosis of TB in Mwanza, Tanzania. Methods: Sputum samples from Presumptive TB patients were submitted to TB laboratory for routine diagnosis of TB using Xpert MTB/RIF. The TB results from the individual sputum samples were used as the reference standard and were concealed to the investigating laboratory technicians. The remainder of samples were collected serially and were pooled (5 samples per pool) for testing. The agreement of the results between individual sample testing against pooled sample testing and cost-savings was assessed. Results: A total of 250 sputum samples from presumptive TB patients were analyzed and 50 pools were made with each pool containing 5 samples. Of the 50 sputum pools made, Mycobacterium tuberculosis (MTB) was detected in 17 (34.0%) pools. Results from the individual sputum samples MTB/RIF testing were retrieved for all 250 samples and there were 28 (11.2%) samples in which MTB was detected whereas 222 (88.8%) samples had no MTB detected. Following re-analysis of positive pools, all 28 (100%) individual positive MTB samples were detected within the 17 positive pools, with 1 to 3 individual MTB positive samples per pool. The individual sputum samples were correctly identified by pooled sputum on Xpert MTB/RIF testing, with the sensitivity of 100% and specificity of 100%. Using pooling of sputum samples strategy, we saved 46.0% (115/250) of the cartridges. Conclusion: The pooled sputum testing strategy reduced cartridge costs by 46.0% and has the potential to increase the affordability of Xpert MTB/RIF testing in countries with limited resources, such as Tanzania.
文摘Various enhanced surfaces have been proposed over the years to improve boiling heat transfer. This paper introduces an experimental setup designed for boiling demonstration in the graduate-level Heat Transfer course. The pool boiling performance of water under atmospheric pressure of 1.025 bar is investigated by using several structured surfaces at heat fluxes of 28 and 35 kW/m<sup>2</sup>. Surfaces with holes, rectangular grooves, and mushroom fins are manufactured by an NC-controlled vertical milling machine. The heat flux versus excess temperature graph is plotted by using thermocouple measurements of water and base temperatures of the boiling vessel. The separation, rise, and growth of individual vapor bubbles from the surface during boiling were recorded with a digital camera. The results for the plain surface are compared to the Rohsenow correlation. The enhancement of heat transfer coefficient (h) ranged between 15% - 44.5% for all structured surfaces. The highest heat transfer coefficient enhancement is observed between 41% - 56.5% for holed surface-3 (405 holes) compared to the plain surface. The excess temperature dropped around 29% - 34% for holed surface-3 (405 holes) compared to the plain surface. The heat transfer coefficient increases as the spacing between channels or holes decreases. While the bubbles on holed and mushroomed surfaces were spherical, the bubbles on the flat and grooved surfaces were observed as formless. The suggested economical test design could be appropriate to keep students focused and participating in the classroom.
基金This project was supported by the North Dakota Agricultural Experiment Station,North Dakota State University(FARG007858).
文摘Mineralisable soil organic carbon(SOC)pools vary with ecosystem type in response to changes in climate,vegetation and soil properties.Understanding the effect of climate and soil factors on SOC pools is critical for predicting change over time.Surface soil samples from six ecoregions of the United States were analyzed for permanganate oxidizable C(KMnO4-C)and mineralizable C pools.Variations of SOC ranged from 7.9 mg g^-1(Florida site)to 325 mg g^-1(Hawaii site).Mineralisable C pools and KMnO4-C were highest in soils from the Hawaii site.Mean annual precipitation explains SOC and resistant C pool variations.Clay content was related to mineralisable active C pools and bacterial abundance.Mean annual precipitation and clay content are potential variables for predicting changes in SOC pools at large spatial scales.
