A new Nylon 11(PA11)/polyethylene-octene(POE) blends compatibilized by maleic anhydride grafted mixture polyethyleneocten(POE-g-MAH) was prepared through melt blending method.The isothermal crystallization kinet...A new Nylon 11(PA11)/polyethylene-octene(POE) blends compatibilized by maleic anhydride grafted mixture polyethyleneocten(POE-g-MAH) was prepared through melt blending method.The isothermal crystallization kinetics and melting behaviors of PA11/POE blends were investigated in detail by differential scanning calorimetry(DSC) and polarized optical microscope.The n values of PA11 blending with POE or POE-g-MAH are almost similar with pure PA11,which indicates that the effect of POE and POE-g-MAH on nucleation and growth of PA11 crystal is slight.The overall crystallization rate of PA11/POE blends are higher than ones of pure PA11 at the same crystallization temperatures,but they decrease significantly when POE-g-MAH is added into PA11/POE blends.DSC heating curves of both PA11 and its blends exhibit two melting peaks,but the two melting peak become weaker when POE-g-MAH is add into PA11/POE blend systems.And the spherulite size is reduced significantly by the addition of POE-g-MAH compared with pure PA11 and PA11/POE blends.展开更多
Poly(phenylene oxide)/renewable polyamide 11 (PPO/PA11 20/80) blends toughened with glycidylmethacrylate grafted ethylene-n-octene copolymer (GEOC) were prepared in a co-rotating twin-screwextruder. The reaction betwe...Poly(phenylene oxide)/renewable polyamide 11 (PPO/PA11 20/80) blends toughened with glycidylmethacrylate grafted ethylene-n-octene copolymer (GEOC) were prepared in a co-rotating twin-screwextruder. The reaction between GEOC and PPO/PA11 blend was analyzed by gel content tests. Themorphology of PPO/PA11/GEOC blends was observed by scanning electron microscope. The SEMresults showed that PPO formed the continuous phase, though it is a minority component of blends. Withincreasing GEOC content from 5 to 15 wt% the morphology of the blends transformed from droplet-matrix toco-continuous structure, in which both PA11 and PPO phases are continuous. The blend with co-continuousmorphology had better mechanical properties than those with droplet-matrix morphology. The impactstrength of the PPO/PA11/GEOC blends was much higher compared to the one without GEOC as well asPA11 due to the compatibilizing effect, which was also proved by DSC analysis, rheological behavior (MFR,DMTA) and tensile properties.展开更多
The rheological behavior of blend, e.g. polypropylene,PP, with polyamide - 6, PA6, has been investigated.Results show that this blend is a pseudo plastic fluid and the amount of PA6 seems to be a dominator to influenc...The rheological behavior of blend, e.g. polypropylene,PP, with polyamide - 6, PA6, has been investigated.Results show that this blend is a pseudo plastic fluid and the amount of PA6 seems to be a dominator to influence all rheological properties. In addition to the expected influence by temperature generally for polymer, it has been found the amount of PA6 is valid in a range, e.g. 0-20% corresponding to the PP amount, i.e. in this range, the larger the PA6 added, the larger is the nonNewtonian index, n, and this is obviously especially for PP/PA6 blend with the high shear stress.展开更多
文摘A new Nylon 11(PA11)/polyethylene-octene(POE) blends compatibilized by maleic anhydride grafted mixture polyethyleneocten(POE-g-MAH) was prepared through melt blending method.The isothermal crystallization kinetics and melting behaviors of PA11/POE blends were investigated in detail by differential scanning calorimetry(DSC) and polarized optical microscope.The n values of PA11 blending with POE or POE-g-MAH are almost similar with pure PA11,which indicates that the effect of POE and POE-g-MAH on nucleation and growth of PA11 crystal is slight.The overall crystallization rate of PA11/POE blends are higher than ones of pure PA11 at the same crystallization temperatures,but they decrease significantly when POE-g-MAH is added into PA11/POE blends.DSC heating curves of both PA11 and its blends exhibit two melting peaks,but the two melting peak become weaker when POE-g-MAH is add into PA11/POE blend systems.And the spherulite size is reduced significantly by the addition of POE-g-MAH compared with pure PA11 and PA11/POE blends.
文摘Poly(phenylene oxide)/renewable polyamide 11 (PPO/PA11 20/80) blends toughened with glycidylmethacrylate grafted ethylene-n-octene copolymer (GEOC) were prepared in a co-rotating twin-screwextruder. The reaction between GEOC and PPO/PA11 blend was analyzed by gel content tests. Themorphology of PPO/PA11/GEOC blends was observed by scanning electron microscope. The SEMresults showed that PPO formed the continuous phase, though it is a minority component of blends. Withincreasing GEOC content from 5 to 15 wt% the morphology of the blends transformed from droplet-matrix toco-continuous structure, in which both PA11 and PPO phases are continuous. The blend with co-continuousmorphology had better mechanical properties than those with droplet-matrix morphology. The impactstrength of the PPO/PA11/GEOC blends was much higher compared to the one without GEOC as well asPA11 due to the compatibilizing effect, which was also proved by DSC analysis, rheological behavior (MFR,DMTA) and tensile properties.
文摘The rheological behavior of blend, e.g. polypropylene,PP, with polyamide - 6, PA6, has been investigated.Results show that this blend is a pseudo plastic fluid and the amount of PA6 seems to be a dominator to influence all rheological properties. In addition to the expected influence by temperature generally for polymer, it has been found the amount of PA6 is valid in a range, e.g. 0-20% corresponding to the PP amount, i.e. in this range, the larger the PA6 added, the larger is the nonNewtonian index, n, and this is obviously especially for PP/PA6 blend with the high shear stress.